Effect of bipolar-plates design on corrosion,mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers:A review

Attaining a decarbonized and sustainable energy system,which is the core solution to global energy issues,is accessible through the development of hydrogen energy.Proton-exchange membrane water electrolyzers(PEMWEs)are promising devices for hydrogen production,given their high efficiency,rapid responsiveness,and compactness.Bipolar plates account for a relatively high percentage of the total cost and weight compared with other components of PEMWEs.Thus,optimization of their design may accelerate the promotion of PEMWEs.This paper reviews the advances in materials and flow-field design for bipolar plates.First,the working conditions of proton-exchange membrane fuel cells(PEMFCs)and PEMWEs are compared,including reaction direction,operating temperature,pressure,input/output,and potential.Then,the current research status of bipolar-plate substrates and surface coatings is summarized,and some typical channel-rib flow fields and porous flow fields are presented.Furthermore,the effects of materials on mass and heat transfer and the possibility of reducing corrosion by improving the flow field structure are explored.Finally,this review discusses the potential directions of the development of bipolar-plate design,including material fabrication,flow-field geometry optimization using threedimensional printing,and surface-coating composition optimization based on computational materials science.

A Cu-Pd alloy catalyst with partial phase separation for the electrochemical CO_(2) reduction reaction

Cu catalysts can convert CO_(2) through an electrochemical reduction reaction into a variety of useful carbon-based products.However,this capability provides an obstacle to increasing the selectivity for a single product.Herein,we report a simple fabrication method for a Cu-Pd alloy catalyst for use in a membrane electrode assembly(MEA)-based CO_(2) electrolyzer for the electrochemical CO_(2) reduction reaction(ECRR)with high selectivity for CO production.When the composition of the Cu-Pd alloy catalyst was fabricated at 6:4,the selectivity for CO increased and the production of multi-carbon compounds and hydrogen is suppressed.Introducing a Cu-Pd alloy catalyst with 6:4 ratio as the cathode of the MEAbased CO_(2) electrolyzer showed a CO faradaic efficiency of 92.8%at 2.4 V_(cell).We assumed that these results contributed from the crystal planes on the surface of the Cu-Pd alloy.The phases of the Cu-Pd alloy catalyst were partially separated through annealing to fabricate a catalyst with high selectivity for CO at low voltage and C_(2)H_4 at high voltage.The results of CO-stripping testing confirmed that when Cu partially separates from the lattice of the Cu-Pd alloy,the desorption of~*CO is suppressed,suggesting that C-C coupling reaction is favored.

Transcriptomics integrated with metabolomics reveals the mechanism of CaCl_(2)-HCl electrolyzed water-induced glucosinolate biosynthesis in broccoli sprouts

Glucosinolates are important phytochemicals in Brassicaceae.We investigated the effect of CaCl_(2)-HCl electrolyzed water(CHEW)on glucosinolates biosynthesis in broccoli sprouts.The results showed that CHEW treatment significantly decreased reactive oxygen species(ROS)and malondialdeh yde(MDA)contents in broccoli sprouts.On the the 8^(th)day,compared to tap water treatment,the the total glucosinolate content of broccoli sprouts with CHEW treatment increased by 10.6%and calcium content was dramatically enhanced from 14.4 mg/g DW to 22.7 mg/g DW.Comparative transcriptome and metabolome analyses revealed that CHEW treatment activated ROS and calcium signaling transduction pathways in broccoli sprouts and they interacted through MAPK cascades.Besides,CHEW treatment not only promoted the biosynthesis of amino acids,but also enhanced the expression of structural genes in glucosinolate synthesis through transcription factors(MYBs,bHLHs,WRKYs,etc.).The results of this study provided new insights into the regulatory network of glucosinolates biosynthesis in broccoli sprouts under CHEW treatment.

Pulsed laser interference patterning of transition-metal carbides for stable alkaline water electrolysis kinetics

We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed laser ablation of Co,Fe,Ti,and Mo metals in acetone.The interaction between carbon s-p-orbitals and metal d-orbitals causes a redistribution of valence structure through charge transfer,leading to the formation of surface defects as observed by X-ray photoelectron spectroscopy.These defects influence the evolved TMCs,making them effective for hydrogen and oxygen evolution reactions(HER and OER)in an alkaline medium.Co_(3)C with more oxygen affinity promoted CoO(OH)intermediates,and the electrochemical surface oxidation to Co_(3)O_(4)was captured via in situ/operando electrochemical Raman probes,increasing the number of active sites for OER activity.MoC with more d-vacancies exhibits strong hydrogen binding,promoting HER kinetics,whereas Fe_(3)C and TiC with more defect states to trap charge carriers may hinder both OER and HER activities.The results show that the assembled membrane-less electrolyzer with Co_(3)C∥Co_(3)C and MoC∥MoC electrodes requires~2.01 and 1.99 V,respectively,to deliver a 10 mA cm−2 with excellent electrochemical and structural stability.In addition,the ascertained pulsed laser synthesis mechanism and unit-cell packing relations will open up sustainable pathways for obtaining highly stable electrocatalysts for electrolyzers.

Towards high-performance and robust anion exchange membranes(AEMs)for water electrolysis:Super-acid-catalyzed synthesis of AEMs

The increasing demand for hydrogen energy to address environmental issues and achieve carbon neutrality has elevated interest in green hydrogen production,which does not rely on fossil fuels.Among various hydrogen production technologies,anion exchange membrane water electrolyzer(AEMWE)has emerged as a next-generation technology known for its high hydrogen production efficiency and its ability to use non-metal catalysts.However,this technology faces significant challenges,particularly in terms of the membrane durability and low ionic conductivity.To address these challenges,research efforts have focused on developing membranes with a new backbone structure and anion exchange groups to enhance durability and ionic conductivity.Notably,the super-acid-catalyzed condensation(SACC)synthesis method stands out due to its user convenience,the ability to create high molecular weight(MW)polymers,and the use of oxygen-tolerant organic catalysts.Although the synthesis of anion exchange membranes(AEMs)using the SACC method began in 2015,and despite growing interest in this synthesis approach,there remains a scarcity of review papers focusing on AEMs synthesized using the SACC method.The review covers the basics of SACC synthesis,presents various polymers synthesized using this method,and summarizes the development of these polymers,particularly their building blocks including aryl,ketone,and anion exchange groups.We systematically describe the effects of changes in the molecular structure of each polymer component,conducted by various research groups,on the mechanical properties,conductivity,and operational stability of the membrane.This review will provide insights into the development of AEMs with superior performance and operational stability suitable for water electrolysis applications.

Modeling of Large-Scale Hydrogen Storage System Considering Capacity Attenuation and Analysis of Its Efficiency Characteristics

In the existing power system with a large-scale hydrogen storage system,there are problems such as low efficiency of electric-hydrogen-electricity conversion and single modeling of the hydrogen storage system.In order to improve the hydrogen utilization rate of hydrogen storage system in the process of participating in the power grid operation,and speed up the process of electric-hydrogen-electricity conversion.This article provides a detailed introduction to the mathematical and electrical models of various components of the hydrogen storage unit,and also establishes a charging and discharging efficiency model that considers the temperature and internal gas partial pressure of the hydrogen storage unit.These models are of great significance for studying and optimizing gas storage technology.Through these models,the performance of gas storage units can be better understood and improved.These studies are very helpful for improving energy storage efficiency and sustainable development.The factors affecting the charge-discharge efficiency of hydrogen storage units are analyzed.By integrating the models of each unit and considering the capacity degradation of the hydrogen storage system,we can construct an efficiency model for a large hydrogen storage system and power conversion system.In addition,the simulation models of the hydrogen production system and hydrogen consumption system were established in MATLAB/Simulink.The accuracy and effectiveness of the simulation model were proved by comparing the output voltage variation curve of the simulation with the polarization curve of the typical hydrogen production system and hydrogen consumption system.The results show that the charge-discharge efficiency of the hydrogen storage unit increases with the increase of operating temperature,and H2 and O2 partial voltage have little influence on the charge-discharge efficiency.In the process of power conversion system converter rectification operation,its efficiency decreases with the increase of temperature,while in the process of inverter operation,power conversion system efficiency increases with the increase of temperature.Combined with the efficiency of each hydrogen storage unit and power conversion system converter,the upper limit of the capacity loss of different hydrogen storage units was set.The optimal charge-discharge efficiency of the hydrogen storage system was obtained by using the Cplex solver at 36.46%and 66.34%.

Emerging trends of electrocatalytic technologies for renewable hydrogen energy from seawater:Recent advances,challenges,and techno-feasible assessment

Hydrogen has been regarded as a promising renewable and green energy source to meet energy needs and attain net-zero carbon emissions.The electrolysis of seawater to make hydrogen is one of the fascinating developments of the twenty-first century.This method uses abundant and relatively inexpensive seawater,as opposed to freshwater,which is rare and can be prohibitively expensive.In recent years,significant research and advancements have been made in direct seawater electrolysis technology for hydrogen production.However,producing highly effective and efficient electrocatalysts with long-term viability under harsh corrosive conditions remains a challenging and severe topic for large-scale seawater electrolysis technology.There is still a large accomplishment gap in understanding how to improve seawater electrolysis to increase hydrogen yields and prolong stability.It is,therefore,crucial to have a condensed knowledge of the tunable and inherent interactions between various electrocatalysts,covering electrolyzer types and paying particular attention to those with high efficiency,chemical stability,and conductivity.The extensive discussion is structured into a progression from noble metals to base metal compounds such as oxides,alloys,phosphides,chalcogenides,hydroxides,and nitrides,MXene-based complexes with a concise examination of hybrid electrocatalysts.In addition,proton exchange membranes,anion exchange membranes,alkaline water electrolyzers,and high-temperature water electrolyzers were potential contributors to seawater’s electrolysis.An extensive assessment of the techno-feasibility,economic insights,and future suggestions was done to commercialize the most efficient electrocatalytic systems for hydrogen production.This review is anticipated to provide academics,environmentalists,and industrial researchers with valuable ideas for constructing and modifying seawater-based electrocatalysts.

Recent advances of bismuth-based electrocatalysts for CO_(2)reduction:Strategies,mechanism and applications

Electrocatalytic CO_(2)reduction reaction(CO_(2)RR),driven by clean electric energy such as solar and wind,can not only alleviate environmental greenhouse effect stemming from excessive CO_(2)emissions,but also realize the storage of renewable energy,for it guarantees the production of value-added chemicals and fuels.Among CO_(2)RR products,formic acid shows great advantages in low energy consumption and high added-value,and thus producing formic acid is generally considered as a profitable line for CO_(2)RR.Bismuth-based electrocatalysts exhibit high formic acid selectivity in CO_(2)RR.Herein,we review the recent progress in bismuth-based electrocatalysts for CO_(2)RR,including material synthesis,performance optimization/validation,and electrolyzers.The effects of morphologies,structure,and composition of bismuth-based electrocatalysts on CO_(2)RR performance are highlighted.Simultaneously,in situ spectroscopic characterization and DFT calculations for reaction mechanism of CO_(2)RR on Bi-based catalysts are emphasized.The applications and optimization of electrolyzers with high current density for CO_(2)RR are summarized.Finally,conclusions and future directions in this field are prospected.

Strategic comparison of membrane-assisted and membrane-less water electrolyzers and their potential application in direct seawater splitting(DSS)

Electrocatalytic splitting of water by means of renewable energy as the electricity supply is one of the most promising methods for storing green renewable energy as hydrogen. Although two-thirds of the earth’s surface is covered with water, there is inadequacy of freshwater in most parts of the world. Hence, splitting seawater instead of freshwater could be a truly sustainable alternative. However, direct seawater splitting faces challenges because of the complex composition of seawater. The composition, and hence, the local chemistry of seawater may vary depending on its origin, and in most cases, tracking of the side reactions and standardizing and customizing the catalytic process will be an extra challenge. The corrosion of catalysts and competitive side reactions due to the presence of various inorganic and organic pollutants create challenges for developing stable electro-catalysts. Hence, seawater splitting generally involves a two-step process, i.e., purification of seawater using reverse osmosis and then subsequent fresh water splitting. However, this demands two separate chambers and larger space, and increases complexity of the reactor design. Recently, there have been efforts to directly split seawater without the reverse osmosis step. Herein, we represent the most recent innovative approaches to avoid the two-step process, and compare the potential application of membrane-assisted and membrane-less electrolyzers in direct seawater splitting(DSS). We particularly discuss the device engineering, and propose a novel electrolyzer design strategies for concentration gradient based membrane-less microfluidic electrolyzer.

Moderate heat treatment of CoFe Prussian blue analogues for enhanced oxygen evolution reaction performance

Prussian blue analogues(PBAs) with inherent ordered structures and abundant metal ion sites are widely explored as precursors for various electrochemical applications,including oxygen evolution reaction(OER).Using a range of characterization techniques including Fourier-transform infrared spectroscopy(FT-IR),X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD) and energy dispersive spectroscopy(EDS),this work discloses the process of replacement of K^(+)by NH4^(+)in the interstitial spaces of the CoFe PBA by a hot aqueous urea solution,which influences the transformation of PBAs under further heat treatment and the OER performance of the deriva tives.After heat treatment at 400℃ under Ar flow,high-resolution transmission electron microscopy(HRTEM) images reveal that CoFe alloy nanoparticles grew on the crystalline cubes of CoFe PBA with K^(+),while CoFe PBA cubes with NH4^(+)become amorphous.Besides,the derivative of CoFe PBA with NH4^(+)(Ar-U-CoFe PBA) performs better than the derivative of CoFe PBA with K^(+)(Ar-CoFe PBA) in OER,registering a lower overpotential of 305 mV at 10 mA cm^(-2),a smaller Tafel slope of 36.1 mV dec^(-1),and better stability over a testing course of 20 h in 1.0 M KOH.A single-cell alkaline electrolyzer,using Ar-U-CoFe PBA and Pt/C for the anodic and cathodic catalyst,respectively,requires an initial cell voltage of 1.66 V to achieve 100 mA cm^(-2)at 80℃,with negligible degradation after100 h.

Technical factors affecting the performance of anion exchange membrane water electrolyzer

Anion exchange membrane(AEM)electrolysis is a promising membrane-based green hydrogen production technology.However,AEM electrolysis still remains in its infancy,and the performance of AEM electrolyzers is far behind that of well-developed alkaline and proton exchange membrane electrolyzers.Therefore,breaking through the technical barriers of AEM electrolyzers is critical.On the basis of the analysis of the electrochemical performance tested in a single cell,electrochemical impedance spectroscopy,and the number of active sites,we evaluated the main technical factors that affect AEM electrolyzers.These factors included catalyst layer manufacturing(e.g.,catalyst,carbon black,and anionic ionomer)loadings,membrane electrode assembly,and testing conditions(e.g.,the KOH concentration in the electrolyte,electrolyte feeding mode,and operating temperature).The underlying mechanisms of the effects of these factors on AEM electrolyzer performance were also revealed.The irreversible voltage loss in the AEM electrolyzer was concluded to be mainly associated with the kinetics of the electrode reaction and the transport of electrons,ions,and gas-phase products involved in electrolysis.Based on the study results,the performance and stability of AEM electrolyzers were significantly improved.

Layered power scheduling optimization of PV hydrogen production system considering performance attenuation of PEMEL

To analyze the additional cost caused by the performance attenuation of a proton exchange membrane electrolyzer(PEMEL)under the fluctuating input of renewable energy,this study proposes an optimization method for power scheduling in hydrogen production systems under the scenario of photovoltaic(PV)electrolysis of water.First,voltage and performance attenuation models of the PEMEL are proposed,and the degradation cost of the electrolyzer under a fluctuating input is considered.Then,the calculation of the investment and operating costs of the hydrogen production system for a typical day is based on the life cycle cost.Finally,a layered power scheduling optimization method is proposed to reasonably distribute the power of the electrolyzer and energy storage system in a hydrogen production system.In the up-layer optimization,the PV power absorbed by the hydrogen production system was optimized using MALTAB+Gurobi.In low-layer optimization,the power allocation between the PEMEL and battery energy storage system(BESS)is optimized using a non-dominated sorting genetic algorithm(NSGA-Ⅱ)combined with the firefly algorithm(FA).A better optimization result,characterized by lower degradation and total costs,was obtained using the method proposed in this study.The improved algorithm can search for a better population and obtain optimization results in fewer iterations.As a calculation example,data from a PV power station in northwest China were used for optimization,and the effectiveness and rationality of the proposed optimization method were verified.

Accelerating net-zero carbon emissions by electrochemical reduction of carbon dioxide

Electroreduction of CO_(2)shows great potential for global CO_(2)utilization and uptake when collaborated with renewable electricity.Recent advances have been achieved in fundamental understanding and electrocatalyst development for CO_(2)electroreduction.We think this research area has progressed to the stage where significant efforts can focus on translating the obtained knowledge to the development of largescale electrolyzers,which have the potential to accelerate the transition of the current energy system into a sustainable and zero-carbon emission energy structure.In this perspective paper,we first critically evaluate the advancement of vapor-feed devices that use CO_(2)as reactants,from the point of view of industry applications.Then,by carefully comparing their performance to the state-of-the-art water electrolyzers which are well-established technology providing realistic performance targets,we looped back and discussed the remaining challenges including electrode catalysts,reaction conditions,mass transporting,membrane,device durability,operation mode,and so on.Finally,we provide perspectives on the challenges and suggest opportunities for generating fundamental knowledge and achieving technological progress toward the development of practical CO_(2)electrolyzers for the goal of building lowcarbon or/and net carbon-free economies.

CO_(2)electrolysis:Advances and challenges in electrocatalyst engineering and reactor design

Electrochemical reduction of CO_(2)(CO_(2)RR)coupled with renewable electrical energy is an attractive way of upgrading CO_(2)to value-added chemicals and closing the carbon cycle.However,CO_(2)RR electrocatalysts still suffer from high overpotential,and the complex reaction pathways of CO_(2)RR often lead to mixed products.Early research focuses on tuning the binding of reaction intermediates on electrocatalysts,and recent efforts have revealed that the design of electrolysis reactors is equally important for efficient and selective CO_(2)RR.In this review,we present an overview of recent advances and challenges toward achieving high activity and high selectivity in CO_(2)RR at ambient conditions,with a particular focus on the progress of CO_(2)RR electrocatalyst engineering and reactor design.Our discussion begins with three types of electrocatalysts for CO_(2)RR(noble metalbased,none-noble metal-based,and metal-free electrocatalysts),and then we examine systems-level strategies toward engineering specific components of the electrolyzer,including gas diffusion electrodes,electrolytes,and polymer electrolyte membranes.We close with future perspectives on catalyst development,in-situ/operando characterization,and electrolyzer performance evaluation in CO_(2)RR studies.

Advances and challenges of electrolyzers for large-scale CO_(2) electroreduction

CO_(2) electroreduction(CO_(2) ER)to high value-added chemicals is considered as a promising technology to achieve sustainable carbon neutralization.By virtue of the progressive research in recent years aiming at design and understanding of catalytic materials and electrolyte systems,the CO_(2) ER performance(such as current density,selectivity,stability,CO_(2) conversion,etc.)has been continually increased.Unfortunately,there has been relatively little attention paid to the large-scale CO 2 electrolyzers,which stand just as one obstacle,alongside series-parallel integration,challenging the practical application of this infant technology.In this review,the latest progress on the structures of low-temperature CO_(2) electrolyzers and scale-up studies was systematically overviewed.The influence of the CO_(2) electrolyzer configurations,such as the flow channel design,gas diffusion electrode(GDE)and ion exchange membrane(IEM),on the CO_(2) ER performance was further discussed.The review could provide inspiration for the design of large-scale CO_(2) electrolyzers so as to accelerate the industrial application of CO_(2) ER technology.

Electro-Oxidation of Concentrated Ce(Ⅲ) at Carbon Felt Anode in Nitric Acid Media

Electro-oxidation of Ce （ Ⅲ ） to Ce （ Ⅳ ） in parallel plate flow type electrolyzer divided with cation exchange membrane was carried out in nitric acid media at carbon felt anode under galvanostatic conditions. Carbon felt was used as an anode for its high specific surface area and high oxygen evolution overpotential. Pt coated Ti plates were used as cathode and anode current feeder. The oxidation of 1 mol· L^-1 Ce（ Ⅲ ） solution in 2 mol· L^- 1 HNO3 was proceeding with a high current efficiency （92%） until about 80% of Ce（ Ⅲ ） was oxidized. Then, oxygen evolution, accompanied by terminal voltage jump, took place, lowering current efficiency. Ce（ Ⅲ ） was oxidized up to 90% with current efficiency of 62%. In this mode, strong carbon felt anode oxidation was observed. The wear out of carbon felt was 46% in six consequent runs （6 h of operation）. After each run, carbon felt surface had to be renewed with slightly alkaline solution to remove carbon oxidation products and ensure regular operational conditions. When anode surface was blocked, oxygen evolution took place from the beginning of electrolysis due to higher actual current density. The wear out of carbon felt anode could be minimized by means of oxygen evolution prevention. In the case when electrolysis had been stopped before oxygen evolution started （at Ce（ Ⅳ ） conversion of about 80% ）, the wear out of anode was less than 2% during 6 consequent runs （4 h of operation）.

Biomass derived porous nitrogen doped carbon for electrochemical devices

Biomass derived porous nanostructured nitrogen doped carbon(PNC) has been extensively investigated as the electrode material for electrochemical catalytic reactions and rechargeable batteries. Biomass with and without containing nitrogen could be designed and optimized to prepare PNC via hydrothermal carbonization, pyrolysis, and other methods. The presence of nitrogen in carbon can provide more active sites for ion absorption, improve the electronic conductivity, increase the bonding between carbon and sulfur, and enhance the electrochemical catalytic reaction. The synthetic methods of natural biomass derived PNC, heteroatomic co-or tri-doping into biomass derived carbon and the application of biomass derived PNC in rechargeable Li/Na batteries, high energy density Li-S batteries, supercapacitors, metal-air batteries and electrochemical catalytic reaction(oxygen reduction and evolution reactions, hydrogen evolution reaction) are summarized and discussed in this review. Biomass derived PNCs deliver high performance electrochemical storage properties for rechargeable batteries/supercapacitors and superior electrochemical catalytic performance toward hydrogen evolution, oxygen reduction and evolution, as promising electrodes for electrochemical devices including battery technologies, fuel cell and electrolyzer.

Effect of Alkaline Electrolyzed Water on Performance Improvement of Green Concrete with High Volume of Mineral Admixtures

The strength and durability of concrete will be significantly reduced at high volume of mineral admixture,and the poor early strength of concrete also still needs to be solved.In this investigation,a highly active alkaline electrolyzed waters was used as mixing water to improve the early strength and enhance the durability of green concrete with high volume mineral admixture,the influences of alkaline electrolyzed water(AEW)on hydration activity of mineral admixture and durability of concrete were determined.The results showed that compared with natural tap water,AEW can accelerate early hydration process of cement in concrete and produce comparatively more hydrated products,leading to a 13.6%higher compressive strength than that of ordinary concrete at early age,but the improvement effect of AEW concrete was relatively reduced at long-term age.Meanwhile,the activity of mineral admixtures could be stimulated by AEW to some extent,the strength and durability performance of AEW concrete after double doping 25%slag and 25%fly ash can still reach the level of ordinary cement concrete without mineral admixtures.The SEM micromorphology of 7 d hydrated natural tap water cement paste was observed to be flaky and tabular,but the AEW cement pastes present obvious cluster and granulation phenomenon.The SEM microstructure of AEW concrete with mineral admixtures is more developed and denser than ordinary tap water concrete with mineral admixtures.Therefore,the AEW probably could realize the effective utilization of about 50%mineral admixture amount of concrete without strength loss,the cement production cost and associated CO_(2) emission reduced,which has a good economic and environmental benefit.

Preparation of Dy-Fe Alloy from Dy2O3 Bymolten Salt Electrochemical Process

Dy-Fe alloy replace dysprosium in the NdFeB permanent material can improve the performance and productivity and cut the cost.The electrolyte is a binary system of molten DyF3-LiF.Iron is cathode and graphite is anode.The raw material is Dy2O3 oxide.The content of dysprosium is (78 ～85 ) ± 1% in the Dy-Fe alloy made by electrolyzing in the industry producing.In the course of electrolyzing the efficiency of current, the alloy formation and the productivity of rare earths by studying the formation of electrolyte, the electrolyzing temperature, the standards and the current density of cathode, the anode shape etc were studied.The conclusion is that we can produce Dy-Fe alloy (the content of dysprosium is (78 ～ 85 ) ± 1% ) in this condition, the efficiency of current is greater than 68 %, and the productivity of rare earth is greater than 92%.The content of oxygen, calcium, wolfram is smaller than the content by reducing.

An effective oxygen electrode based on Ir0.6Sn0.4O2 for PEM water electrolyzers

An effective oxygen evolution electrode with Ir0.6Sn0.4O2 was designed for proton exchange membrane(PEM)water electrolyzers.The anode catalyst layer exhibits a jagged structure with smaller particles and pores,which provide more active sites and mass transportation channels.The prepared IrSn electrode showed a cell voltage of 1.96 V at 2.0 A cm^-2 with Ir loading as low as 0.294 mg cm^-2.Furthermore,Ir Sn electrode with different anode catalyst loadings was investigated.The IrS n electrode indicates higher mass current and more stable cell voltage than the commercial Ir Black electrode at low loading.