An Electromagnetic Band Gap (EBG) loaded square waveguide Band-Pass Filter (BPF) is proposed in this paper. It’s simply composed by symmetrically loading periodical metal diaphragms on each wall of a square waveguide...An Electromagnetic Band Gap (EBG) loaded square waveguide Band-Pass Filter (BPF) is proposed in this paper. It’s simply composed by symmetrically loading periodical metal diaphragms on each wall of a square waveguide. The influences of insert sizes and loading periods on the overall BPF performances are analyzed. Experimental results agree well with those predicted. 6 GHz pass-band with insert loss less than 1 dB, 2.5 GHz stop-band and larger than 25 dB polarization isolation can be obtained. The BPF can be applied in dual-polarized waveguide-based antenna-feed systems.展开更多
提出了一种分析多层印刷电路板电源分配网络(power distribution network,PDN)中一维(1D)介质型电磁带隙(electromagnetic band-gap,EBG)结构噪声隔离性能的1D有限元数值计算方法.将1D介质型EBG的3D结构简化为1D有限元模型,通过直接求...提出了一种分析多层印刷电路板电源分配网络(power distribution network,PDN)中一维(1D)介质型电磁带隙(electromagnetic band-gap,EBG)结构噪声隔离性能的1D有限元数值计算方法.将1D介质型EBG的3D结构简化为1D有限元模型,通过直接求解波动方程获得传输系数T、反射系数R以及散射参数S.利用R-T曲线可直观地判定频率禁带,而采用分贝表示的S21参数则更方便评价噪声隔离度.根据介质型EBG的周期数、介电常数和周期长度等参数对噪声隔离性能影响的仿真结果,针对少周期、不完全禁带EBG结构提出了先采用多周期EBG结构预测禁带,再通过调整介电常数和周期长度扩展禁带和增强噪声隔离度的两阶段设计方法.采用3D全波电磁仿真验证了1D有限元算法的合理性.展开更多
Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate i...Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate is presented.The first order AMFB and ABS are introduced for equivalent capacitance enhancement and miniaturization with effective space-filling characteristics.The dimension of lattice size is only The proposed structure exhibits a most compact characteristic about 35% size reduction as compared with conven-tional mushroom-like HIS-EBG,and better surface-wave decoupling of around 9 dB at the operating frequency band.Details of design parameters which affect the whole performance of certain band-gap are intensively investigated.A constructed prototype is potential candidate for antenna system per-formance enhancement.展开更多
Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagn...Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.展开更多
通过把3种不同尺寸的L-bridge单元进行组合,在多层PCB板的电源层上,设计了一种新的多周期平面型超宽带电磁带隙(Electromagnetic Band Gap,EBG)结构,可用于抑制数字电路系统中的同步开关噪声(Simultaneous Switching Noise,SSN)。利用H...通过把3种不同尺寸的L-bridge单元进行组合,在多层PCB板的电源层上,设计了一种新的多周期平面型超宽带电磁带隙(Electromagnetic Band Gap,EBG)结构,可用于抑制数字电路系统中的同步开关噪声(Simultaneous Switching Noise,SSN)。利用HFSS软件对该EBG结构进行了建模和仿真,并在仿真基础上制作了电路实物,实测与仿真结果吻合良好。组合结构EBG比传统L-bridge EBG的阻带宽度有明显提高,当抑制深度为-40 d B时,具有从0.8 GHz到9.5 GHz的超宽带阻带特性。展开更多
Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and ...Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.展开更多
文摘An Electromagnetic Band Gap (EBG) loaded square waveguide Band-Pass Filter (BPF) is proposed in this paper. It’s simply composed by symmetrically loading periodical metal diaphragms on each wall of a square waveguide. The influences of insert sizes and loading periods on the overall BPF performances are analyzed. Experimental results agree well with those predicted. 6 GHz pass-band with insert loss less than 1 dB, 2.5 GHz stop-band and larger than 25 dB polarization isolation can be obtained. The BPF can be applied in dual-polarized waveguide-based antenna-feed systems.
文摘提出了一种分析多层印刷电路板电源分配网络(power distribution network,PDN)中一维(1D)介质型电磁带隙(electromagnetic band-gap,EBG)结构噪声隔离性能的1D有限元数值计算方法.将1D介质型EBG的3D结构简化为1D有限元模型,通过直接求解波动方程获得传输系数T、反射系数R以及散射参数S.利用R-T曲线可直观地判定频率禁带,而采用分贝表示的S21参数则更方便评价噪声隔离度.根据介质型EBG的周期数、介电常数和周期长度等参数对噪声隔离性能影响的仿真结果,针对少周期、不完全禁带EBG结构提出了先采用多周期EBG结构预测禁带,再通过调整介电常数和周期长度扩展禁带和增强噪声隔离度的两阶段设计方法.采用3D全波电磁仿真验证了1D有限元算法的合理性.
基金Supported by the 2010 Natural Science Foundation of Shanghai (No. 09ZR1430400)
文摘Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate is presented.The first order AMFB and ABS are introduced for equivalent capacitance enhancement and miniaturization with effective space-filling characteristics.The dimension of lattice size is only The proposed structure exhibits a most compact characteristic about 35% size reduction as compared with conven-tional mushroom-like HIS-EBG,and better surface-wave decoupling of around 9 dB at the operating frequency band.Details of design parameters which affect the whole performance of certain band-gap are intensively investigated.A constructed prototype is potential candidate for antenna system per-formance enhancement.
文摘Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.
文摘通过把3种不同尺寸的L-bridge单元进行组合,在多层PCB板的电源层上,设计了一种新的多周期平面型超宽带电磁带隙(Electromagnetic Band Gap,EBG)结构,可用于抑制数字电路系统中的同步开关噪声(Simultaneous Switching Noise,SSN)。利用HFSS软件对该EBG结构进行了建模和仿真,并在仿真基础上制作了电路实物,实测与仿真结果吻合良好。组合结构EBG比传统L-bridge EBG的阻带宽度有明显提高,当抑制深度为-40 d B时,具有从0.8 GHz到9.5 GHz的超宽带阻带特性。
基金Supported by the National Natural Science Foundation of China(61102022)the Fundamental Research Foundation of Beijing Institute of Technology of China(20120542014)
文摘Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.
