The mathematical model of electromagnetic compatibility and the distribution of aircraft antenna system have been investigated. The solutions of the antenna gain and electromagnetic interference margin in the regions ...The mathematical model of electromagnetic compatibility and the distribution of aircraft antenna system have been investigated. The solutions of the antenna gain and electromagnetic interference margin in the regions of low frequency, resonance and high frequency were discussed. By using the basic analytical method of the EMI margin the distributed antenna system can be determined. The main program flow chart of distributed antenna design were given, and illustrated with examples of the microstrip antennas.展开更多
In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM i...In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM is divided into different cabins to eliminate interferences between power supply circuit, analog circuit and digital circuit. Secondly, the working principle and electromagnetic （EM） characters of all the signals adopted by a typical PCM are analyzed. Then according to specific electromagnetic characters, different measures are adopted in corresponding signal process circuits or signal transfer cables, such as ground layout designing, power supply protecting, signal shielding and drive cable interference suppressing. Finally, further improvement may also needed regarding to practical electromagnetic compatibility test effects. The final test shows that, with all the measures mentioned above, the conducted emission of a PCM can be reduced by 20 dB; meanwhile, the radiated emission can be reduced by 30 dB comparing to the original system.展开更多
In this paper, a solution for electromagnetic compatibility guarantee based on the combination of metal shielding and circuit components distance estimation methods is presented. The electromagnetic noises generated f...In this paper, a solution for electromagnetic compatibility guarantee based on the combination of metal shielding and circuit components distance estimation methods is presented. The electromagnetic noises generated from a working radio-electronic unit can expand into the space and act on other around radio-electronic units. An EMC guaranteed radio-electronic unit by the suitable technique method will not cause the electromagnetic noise to others. In opposition, it will not be under electromagnetic action from another one. Due to the power of electromagnetic noise, the metal shielding, distance estimation or other technique methods should be used to guarantee EMC. Every method has own advantage as so as weakness for detail radio-electronic unit, so it is necessary to choose a suitable method to guarantee EMC for them, the combination of metal shielding and distance estimation is a choice, for example. The proposed solution has been evaluated by using CST (Computer Simulation Technology) software and EMxpertEHX analyzer in oscillator circuit context. The simulated results on CST show that the proposed solution decreases the electromagnetic radiation about of 39.1 dB at frequency 500 MHz in comparison to results when nothing electromagnetic compatibility methods are not used. The experimental results on the oscillator circuit are presented. The electromagnetic radiation reduction of the oscillator circuit is about of (25 - 30) dB. In comparison to individual metal shielding and distance estimation methods, the effectiveness of the proposed solution for electromagnetic compatibility guarantee is significantly increased.展开更多
An absorbing material–conductor laminate is widely used for electromagnetic compatibility of electronic circuits at microwave frequencies. Such a laminate when properly designed will exhibit good results in terms of ...An absorbing material–conductor laminate is widely used for electromagnetic compatibility of electronic circuits at microwave frequencies. Such a laminate when properly designed will exhibit good results in terms of electromagnetic interference and compatibility. In this paper, microwave absorbing materials like 1) Ca-NiTi hexa ferrite composites (Ca (NiTi)x Fe12-2xO19) for x = 0.4, 2) M-Type Barium ferrites (BaFe12-2xAxCoxO19 for the tetravalent A ions, Ru4+ is chosen), 3) MnZn ferrite-Rubber composites with volume fraction vf = 0.4, 4) Carbonyl-Iron particle composites with volume fraction vf = 40% and conducting materials like copper, stainless steel are considered to form the interface in the laminate. Mathematical formulations are carried out for the estimation of reflectivity and shielding effectiveness of absorbing material–conductor laminate at microwave frequencies Analysis is also carried out for various thicknesses of the microwave absorbing material and conducting material in the laminate. The reflectivity and shielding effectiveness depends not only on the type of the selected material in the laminate, but also their thickness in the laminate and frequency of operation.展开更多
Due to the widespread application in recent years, high-power pulse sources have received special attention from large companies and R & D institutions around the world. Compared with foreign mid-range and high-en...Due to the widespread application in recent years, high-power pulse sources have received special attention from large companies and R & D institutions around the world. Compared with foreign mid-range and high-end products, China’s development in this field is relatively lagging behind and lacks mature mid-range and high-end products. The reason is not only because of lack of theoretical support, but more importantly, in the pursuit of indicators and design, the electromagnetic compatibility of the equipment has not been studied thoroughly, resulting in a large degree of distortion in the output waveform, resulting in a reduction in actual value. This paper introduces the sources of high-power pulsed electromagnetic interference of the main driving source, conducts a reasonable high-power electromagnetic compatibility driving source dynamic analysis, and proposes measures to improve electromagnetic compatibility.展开更多
This paper is concerned with the sensor nodes’ hardware design of the wireless sensor network.We focus on the electromagnetic compatibility design of the printed circuit board.In this paper,we will give a schematic d...This paper is concerned with the sensor nodes’ hardware design of the wireless sensor network.We focus on the electromagnetic compatibility design of the printed circuit board.In this paper,we will give a schematic diagram first,and then,according to the layout,wiring rules and the knowledge of electromagnetic compatibility, we will present the design of the printed circuit board which has a good characteristic of electromagnetic compatibility.展开更多
The group of Electrical Engineering and Electromagnetic Compatibility undertakes the design of AC power distribution system along with electromagnetic compatibility and integrated wiring in Heavy-ion Accelerator Facil...The group of Electrical Engineering and Electromagnetic Compatibility undertakes the design of AC power distribution system along with electromagnetic compatibility and integrated wiring in Heavy-ion Accelerator Facilities.展开更多
This paper presents a study on the effects of radiation from electronic equipment in hospitals. This study was performed in Argentinean, Colombian and Spanish hospitals. The work consists of two parts: a survey to det...This paper presents a study on the effects of radiation from electronic equipment in hospitals. This study was performed in Argentinean, Colombian and Spanish hospitals. The work consists of two parts: a survey to determine the hospital personnel’s knowledge of the problem and a technical part consisting of a measurements campaign to determine the levels of radiated electrical and magnetic fields in several hospitals due to the presence of electromagnetic interferences, such as the use of mobile phones. The study of this problem has been of special interest in countries such as the USA and Canada, and this paper attempts to convey the necessity of creating regulations that can be applied to the hospitals of the countries analyzed. More than fifty hospitals were studied in these three countries, considering the following aspects: the hospital personnel’s awareness of the problem, whether the hospitals have performed previous studies of this type, the appearance of problems in medical equipment due to this interference, the origin of the interference, and the failures that have appeared in computers due to electromagnetic interference. The results show that, most hospitals have a lack of knowledge regarding this issue and that field levels above those allowed by international regulations are present. Therefore, a regulation must be established to avoid the problem.展开更多
As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagno...As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagnoses the essential interaction relationship between interference and switching activity based on the timely and area measured waveform,analyzes and studies the production mechanism and coupling path of interference mode,and sets up circuit model according to the features of transverse mode interference and common mode interference.Put forward different suppression methods finally.展开更多
Recent decades have seen rapid advances in the field of electrical engineering, such that our environment has become a sea of electrical and magnetic signals, raising questions about the possible effects of low-freque...Recent decades have seen rapid advances in the field of electrical engineering, such that our environment has become a sea of electrical and magnetic signals, raising questions about the possible effects of low-frequency electromagnetic fields on the environment and which are capable of modifying and destroying our ecosystem. Particular interest was given in this article due to a massive influx of population living near high voltage lines. The analysis and simulation of the influence of low frequency electromagnetic fields on living beings in the vicinity of high voltage sources 132 kV and 220 kV in urban areas in DR Congo is the subject of our research with a view to estimating the level of exposure of humans to low frequency electromagnetic fields. To carry out our research, we used the classic method of analyzing the field produced near a high voltage line based on Maxwell’s image theory, the Maxwell-Gauss theorem and Maxwell-Ampère theorem to model and quantify low-frequency electromagnetic fields in the vicinity of high-voltage lines. The 2D FDTD numerical formulation was developed from telegraphers’ equations and allowed us to obtain models of current and voltage induced by electromagnetic fields on living beings below and near HV lines. The different simulations carried out on the proposed models illustrate the effects of the electrical and geometric parameters of the pylons on the distribution of the electromagnetic field in the vicinity of the HV lines. The results obtained were compared to the safety limits recommended by the standards.展开更多
In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the elec...In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the electromagnetic characteristics of continuous casting with soft-contacted mould is analyzed. It is shown that the electromagnetic pressure on the surface of billet is increasing with the rising of power frequency as a logarithmically parabolic function, with that of electric conductivity of billet as a power junction, and with that of the current in inductor as a parabolic junction.展开更多
Electromagnetic relay is a widely used apparatus which usually works in a magnetic disturbance environment. To evaluate its electromagnetic compatibility (EMC) in a static magnetic field, dynamic characteristics of a ...Electromagnetic relay is a widely used apparatus which usually works in a magnetic disturbance environment. To evaluate its electromagnetic compatibility (EMC) in a static magnetic field, dynamic characteristics of a clapper relay in a uniform static magnetic field situation based on the finite element method (FEM) is studied. Influences of the magnetic field on dynamic parameters (delay time, pick-up time, end pressure, and final velocity) as well as a situation in which the relay cannot function normally are analyzed. Simulation reveals that the external magnetic field which weakens the relay’s air-gap field has a greater influence on the relay’s dynamic parameters than the one strengthening the field. The validity of the simulation is verified by measured results of coil current and armature displacement.展开更多
It is urgent to solve various problems in electromagnetic （EM） engineering under the increasingly complicated environment. Some expert systems （ES） come into being just to keep up with the demand for solving these...It is urgent to solve various problems in electromagnetic （EM） engineering under the increasingly complicated environment. Some expert systems （ES） come into being just to keep up with the demand for solving these problems. Combined with the analysis of development orES technology and the development trend of EM engineering software in recent years, the application orES technology in EM engineering is discussed, and especially the progress of complete ES in electromagnetic compatible （EMC） is introduced.展开更多
为解决商用车在行驶过程中,传统的液压助力转向系统阻力较大且效率较低,并且在长期使用后保养不当容易泄露,可能引起事故等问题,对电动辅助转向电机控制算法和设计进行了研究。电动辅助转向电机选择永磁同步电机,通过应用模糊PID(Propor...为解决商用车在行驶过程中,传统的液压助力转向系统阻力较大且效率较低,并且在长期使用后保养不当容易泄露,可能引起事故等问题,对电动辅助转向电机控制算法和设计进行了研究。电动辅助转向电机选择永磁同步电机,通过应用模糊PID(Proportional Integral Derivative)算法可以精确,快速地调制到参考值。同时采用拓展卡尔曼滤波器可以估算永磁同步电机的转子位置,减小控制器的体积及成本。在驱动系统中,由于大电流耦合路径多样严重影响电机控制系统的电磁兼容性能,所以电机控制时采用驱动系统EMC(Electro Magnetic Compatibility)设计。实验结果表明,基于模糊PID算法以及拓展卡尔曼滤波器的永磁同步电机控制可以应用于商用车电动辅助转向电机控制中。展开更多
文摘The mathematical model of electromagnetic compatibility and the distribution of aircraft antenna system have been investigated. The solutions of the antenna gain and electromagnetic interference margin in the regions of low frequency, resonance and high frequency were discussed. By using the basic analytical method of the EMI margin the distributed antenna system can be determined. The main program flow chart of distributed antenna design were given, and illustrated with examples of the microstrip antennas.
基金Sponsored by the Ministerial Level Foundation(10660060220)
文摘In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM is divided into different cabins to eliminate interferences between power supply circuit, analog circuit and digital circuit. Secondly, the working principle and electromagnetic （EM） characters of all the signals adopted by a typical PCM are analyzed. Then according to specific electromagnetic characters, different measures are adopted in corresponding signal process circuits or signal transfer cables, such as ground layout designing, power supply protecting, signal shielding and drive cable interference suppressing. Finally, further improvement may also needed regarding to practical electromagnetic compatibility test effects. The final test shows that, with all the measures mentioned above, the conducted emission of a PCM can be reduced by 20 dB; meanwhile, the radiated emission can be reduced by 30 dB comparing to the original system.
文摘In this paper, a solution for electromagnetic compatibility guarantee based on the combination of metal shielding and circuit components distance estimation methods is presented. The electromagnetic noises generated from a working radio-electronic unit can expand into the space and act on other around radio-electronic units. An EMC guaranteed radio-electronic unit by the suitable technique method will not cause the electromagnetic noise to others. In opposition, it will not be under electromagnetic action from another one. Due to the power of electromagnetic noise, the metal shielding, distance estimation or other technique methods should be used to guarantee EMC. Every method has own advantage as so as weakness for detail radio-electronic unit, so it is necessary to choose a suitable method to guarantee EMC for them, the combination of metal shielding and distance estimation is a choice, for example. The proposed solution has been evaluated by using CST (Computer Simulation Technology) software and EMxpertEHX analyzer in oscillator circuit context. The simulated results on CST show that the proposed solution decreases the electromagnetic radiation about of 39.1 dB at frequency 500 MHz in comparison to results when nothing electromagnetic compatibility methods are not used. The experimental results on the oscillator circuit are presented. The electromagnetic radiation reduction of the oscillator circuit is about of (25 - 30) dB. In comparison to individual metal shielding and distance estimation methods, the effectiveness of the proposed solution for electromagnetic compatibility guarantee is significantly increased.
文摘An absorbing material–conductor laminate is widely used for electromagnetic compatibility of electronic circuits at microwave frequencies. Such a laminate when properly designed will exhibit good results in terms of electromagnetic interference and compatibility. In this paper, microwave absorbing materials like 1) Ca-NiTi hexa ferrite composites (Ca (NiTi)x Fe12-2xO19) for x = 0.4, 2) M-Type Barium ferrites (BaFe12-2xAxCoxO19 for the tetravalent A ions, Ru4+ is chosen), 3) MnZn ferrite-Rubber composites with volume fraction vf = 0.4, 4) Carbonyl-Iron particle composites with volume fraction vf = 40% and conducting materials like copper, stainless steel are considered to form the interface in the laminate. Mathematical formulations are carried out for the estimation of reflectivity and shielding effectiveness of absorbing material–conductor laminate at microwave frequencies Analysis is also carried out for various thicknesses of the microwave absorbing material and conducting material in the laminate. The reflectivity and shielding effectiveness depends not only on the type of the selected material in the laminate, but also their thickness in the laminate and frequency of operation.
文摘Due to the widespread application in recent years, high-power pulse sources have received special attention from large companies and R & D institutions around the world. Compared with foreign mid-range and high-end products, China’s development in this field is relatively lagging behind and lacks mature mid-range and high-end products. The reason is not only because of lack of theoretical support, but more importantly, in the pursuit of indicators and design, the electromagnetic compatibility of the equipment has not been studied thoroughly, resulting in a large degree of distortion in the output waveform, resulting in a reduction in actual value. This paper introduces the sources of high-power pulsed electromagnetic interference of the main driving source, conducts a reasonable high-power electromagnetic compatibility driving source dynamic analysis, and proposes measures to improve electromagnetic compatibility.
基金supported by the National Nature Science Foundation of China(60804034)Nature Science Foundation of Shandong Province(Y2007G34)the second author is also supported by the "Taishan Scholarship" Construction Engineering
文摘This paper is concerned with the sensor nodes’ hardware design of the wireless sensor network.We focus on the electromagnetic compatibility design of the printed circuit board.In this paper,we will give a schematic diagram first,and then,according to the layout,wiring rules and the knowledge of electromagnetic compatibility, we will present the design of the printed circuit board which has a good characteristic of electromagnetic compatibility.
文摘The group of Electrical Engineering and Electromagnetic Compatibility undertakes the design of AC power distribution system along with electromagnetic compatibility and integrated wiring in Heavy-ion Accelerator Facilities.
基金supported by E.S.E METROSALUD and Instituto Tecnologico Metropolitano—ITM.
文摘This paper presents a study on the effects of radiation from electronic equipment in hospitals. This study was performed in Argentinean, Colombian and Spanish hospitals. The work consists of two parts: a survey to determine the hospital personnel’s knowledge of the problem and a technical part consisting of a measurements campaign to determine the levels of radiated electrical and magnetic fields in several hospitals due to the presence of electromagnetic interferences, such as the use of mobile phones. The study of this problem has been of special interest in countries such as the USA and Canada, and this paper attempts to convey the necessity of creating regulations that can be applied to the hospitals of the countries analyzed. More than fifty hospitals were studied in these three countries, considering the following aspects: the hospital personnel’s awareness of the problem, whether the hospitals have performed previous studies of this type, the appearance of problems in medical equipment due to this interference, the origin of the interference, and the failures that have appeared in computers due to electromagnetic interference. The results show that, most hospitals have a lack of knowledge regarding this issue and that field levels above those allowed by international regulations are present. Therefore, a regulation must be established to avoid the problem.
基金Tianjin Natunal science Foundation of China(No:05YFSYSF033)
文摘As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagnoses the essential interaction relationship between interference and switching activity based on the timely and area measured waveform,analyzes and studies the production mechanism and coupling path of interference mode,and sets up circuit model according to the features of transverse mode interference and common mode interference.Put forward different suppression methods finally.
文摘Recent decades have seen rapid advances in the field of electrical engineering, such that our environment has become a sea of electrical and magnetic signals, raising questions about the possible effects of low-frequency electromagnetic fields on the environment and which are capable of modifying and destroying our ecosystem. Particular interest was given in this article due to a massive influx of population living near high voltage lines. The analysis and simulation of the influence of low frequency electromagnetic fields on living beings in the vicinity of high voltage sources 132 kV and 220 kV in urban areas in DR Congo is the subject of our research with a view to estimating the level of exposure of humans to low frequency electromagnetic fields. To carry out our research, we used the classic method of analyzing the field produced near a high voltage line based on Maxwell’s image theory, the Maxwell-Gauss theorem and Maxwell-Ampère theorem to model and quantify low-frequency electromagnetic fields in the vicinity of high-voltage lines. The 2D FDTD numerical formulation was developed from telegraphers’ equations and allowed us to obtain models of current and voltage induced by electromagnetic fields on living beings below and near HV lines. The different simulations carried out on the proposed models illustrate the effects of the electrical and geometric parameters of the pylons on the distribution of the electromagnetic field in the vicinity of the HV lines. The results obtained were compared to the safety limits recommended by the standards.
文摘In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the electromagnetic characteristics of continuous casting with soft-contacted mould is analyzed. It is shown that the electromagnetic pressure on the surface of billet is increasing with the rising of power frequency as a logarithmically parabolic function, with that of electric conductivity of billet as a power junction, and with that of the current in inductor as a parabolic junction.
基金Project (No. 513230502) supported by the PLA General ArmamentDepartment of China
文摘Electromagnetic relay is a widely used apparatus which usually works in a magnetic disturbance environment. To evaluate its electromagnetic compatibility (EMC) in a static magnetic field, dynamic characteristics of a clapper relay in a uniform static magnetic field situation based on the finite element method (FEM) is studied. Influences of the magnetic field on dynamic parameters (delay time, pick-up time, end pressure, and final velocity) as well as a situation in which the relay cannot function normally are analyzed. Simulation reveals that the external magnetic field which weakens the relay’s air-gap field has a greater influence on the relay’s dynamic parameters than the one strengthening the field. The validity of the simulation is verified by measured results of coil current and armature displacement.
基金the Key Project of Chinese Ministry of Education (No. 104166)
文摘It is urgent to solve various problems in electromagnetic （EM） engineering under the increasingly complicated environment. Some expert systems （ES） come into being just to keep up with the demand for solving these problems. Combined with the analysis of development orES technology and the development trend of EM engineering software in recent years, the application orES technology in EM engineering is discussed, and especially the progress of complete ES in electromagnetic compatible （EMC） is introduced.
文摘为解决商用车在行驶过程中,传统的液压助力转向系统阻力较大且效率较低,并且在长期使用后保养不当容易泄露,可能引起事故等问题,对电动辅助转向电机控制算法和设计进行了研究。电动辅助转向电机选择永磁同步电机,通过应用模糊PID(Proportional Integral Derivative)算法可以精确,快速地调制到参考值。同时采用拓展卡尔曼滤波器可以估算永磁同步电机的转子位置,减小控制器的体积及成本。在驱动系统中,由于大电流耦合路径多样严重影响电机控制系统的电磁兼容性能,所以电机控制时采用驱动系统EMC(Electro Magnetic Compatibility)设计。实验结果表明,基于模糊PID算法以及拓展卡尔曼滤波器的永磁同步电机控制可以应用于商用车电动辅助转向电机控制中。
