Consideration of the influence of supports in modeling the electromagnetic fields of 25 kV traction networks under emergency conditions

Single-phase 25 kV traction networks of electrified alternating current(AC)railways create electromagnetic fields(EMFs)with significant levels of intensity.The most intense magnetic fields occur when short circuits exist between the contact wire and rails or ground.Despite the short duration of exposure,they can adversely affect electronic devices and induce significant voltages in adjacent power lines,which is dangerous for operating personnel.Although numerous investigations have focused on modeling the EMF of traction networks and power lines,the challenge of determining the three-dimensional electromagnetic fields near metal supports during the flow of a short-circuit current through them is yet to be resolved.In this case,the field has a complex spatial structure that significantly complicates the calculations of intensities.This study proposes a methodology,algorithms,software,and digital models for determining the EMF in the described emergency scenarios.During the modeling process,the objects being studied were represented by segments of thin wires to analyze the distribution of the electric charge and calculate the intensities of the electric and magnetic fields.This approach was implemented in the Fazonord software,and the modeling results show a substantial increase in EMF levels close to the support,with a noticeable decrease in the levels as the distance from it increases.The procedure implemented in the commercial software Fazonord is universal and can be used to determine electromagnetic fields at any electrical power facility that includes live parts of limited length.Based on the proposed procedure,the EMF near the supports of overhead power lines and traction networks of various designs could be determined,the EMF levels at substations can be calculated,and the influence of metal structures located near traction networks,such as pedestrian crossings at railway stations,can be considered.

Electromagnetic–thermal–structural coupling analysis of the ITER edge localized mode coil with flexible supports

In a fusion reactor, the edge localized mode（ELM） coil has a mitigating effect on the ELMs of the plasma. The coil is placed close to the plasma between the vacuum vessel and the blanket to reduce its design power and improve its mitigating ability. The coil works in a high-temperature,high-nuclear-heat and high-magnetic-field environment. Due to the existence of outer superconducting coils, the coil is subjected to an alternating electromagnetic force induced by its own alternating current and the outer magnetic field. The design goal for the ELM coil is to maintain its structural integrity in the multi-physical field. Taking as an example the middle ELM coil（with flexible supports） of ITER（the International Thermonuclear Fusion Reactor）, an electromagnetic–thermal–structural coupling analysis is carried out using ANSYS. The results show that the flexible supports help the three-layer casing meet the static and fatigue design requirements. The structural design of the middle ELM coil is reasonable and feasible. The work described in this paper provides the theoretical basis and method for ELM coil design.

Simulation of an Inductive Weld Pool Support for Deep Penetration Laser Beam Welding of Metal Parts

A three-dimensional laminar steady state numerical model was used to investigate the influence of an alternating current(ac)magnetic field during single pass high power laser beam keyhole welding of 20 mm thick aluminum.The three-dimensional heat transfer,fluid dynamics and electromagnetic field equations were solved with the commercial finite element package COMSOL Multiphysics.Dominant physical effects of the process were taken into account:Thermo-capillary(Marangoni)convection at the upper and lower weld pool surfaces,natural convection due to the gravity influence and the latent heat of solid-liquid phase transition.Simulations were conducted for several magnetic field strengths and it was found that the gravity drop-out associated with welding of thick plates due to the hydrostatic pressure can be prevented by the application of an ac magnetic field below the weld specimen of around 70 mT(rms)at an oscillation frequency of 450 Hz.The inductive support system allows for single-pass laser beam welding of thick aluminum plates.The flow pattern in the molten zone and the temperature distributions are significantly changed by the application of the electromagnetic forces in the weld pool.