High resolution Fresnel zone plates for nanoscale three-dimensional imaging of materials by both soft and hard x-rays are increasingly needed by the broad applications in nanoscience and nanotechnology.When the outmos...High resolution Fresnel zone plates for nanoscale three-dimensional imaging of materials by both soft and hard x-rays are increasingly needed by the broad applications in nanoscience and nanotechnology.When the outmost zone-width is shrinking down to 50 nm or even below,patterning the zone plates with high aspect ratio by electron beam lithography still remains a challenge because of the proximity effect.The uneven charge distribution in the exposed resist is still frequently observed even after standard proximity effect correction(PEC),because of the large variety in the line width.This work develops a new strategy,nicknamed as local proximity effect correction(LPEC),efficiently modifying the deposited energy over the whole zone plate on the top of proximity effect correction.By this way,50 nm zone plates with the aspect ratio from 4:1 up to 15:1 and the duty cycle close to 0.5 have been fabricated.Their imaging capability in soft(1.3 keV)and hard(9 keV)x-ray,respectively,has been demonstrated in Shanghai Synchrotron Radiation Facility(SSRF)with the resolution of 50 nm.The local proximity effect correction developed in this work should also be generally significant for the generation of zone plates with high resolutions beyond 50 nm.展开更多
A new method for determining proximity parameters α,β ,and η in electron beam lithography is introduced on the assumption that the point exposure spread function is composed of two Gaussians.A single line i...A new method for determining proximity parameters α,β ,and η in electron beam lithography is introduced on the assumption that the point exposure spread function is composed of two Gaussians.A single line is used as test pattern to determine proximity effect parameters and the normalization approach is adopted in experimental data transaction in order to eliminate the need of measuring exposure clearing dose of the resist.Furthermore,the parameters acquired by this method are successfully used for proximity effect correction in electron beam lithography on the same experimental conditions.展开更多
We describe the fabrication of metal nanogaps of sub-20nm in feature size using the proximity effect in electron beam lithography （EBL）. The proximity effect is extended to develop a flexible and practical method fo...We describe the fabrication of metal nanogaps of sub-20nm in feature size using the proximity effect in electron beam lithography （EBL）. The proximity effect is extended to develop a flexible and practical method for preparing metal （e. g. Au or Ag） nanogaps and arrays in combination with a transfer process （e. g., deposition/lift-off）. Different from the direct gap-writing process,the nanogap precursor structures （nanoconnections） were designed by GDSII software and then written by electron beam. Following a deposition and lift-off process, the metal nanogaps were obtained and the nanogap size can be lowered to -10nm by controlling the exposure dose in EBL.展开更多
A novel simple dose-compensation method is developed for proximity effect correction in electron-beam lithography.The sizes of exposed patterns depend on dose factors while other exposure parameters（including acceler...A novel simple dose-compensation method is developed for proximity effect correction in electron-beam lithography.The sizes of exposed patterns depend on dose factors while other exposure parameters（including accelerate voltage,resist thickness,exposing step size,substrate material,and so on） remain constant.This method is based on two reasonable assumptions in the evaluation of the compensated dose factor：one is that the relation between dose factors and circle-diameters is linear in the range under consideration;the other is that the compensated dose factor is only affected by the nearest neighbors for simplicity.Four-layer-hexagon photonic crystal structures were fabricated as test patterns to demonstrate this method.Compared to the uncorrected structures,the homogeneity of the corrected hole-size in photonic crystal structures was clearly improved.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.U1732104)China Postdoctoral Science Foundation(Grant No.2017M611443)Shanghai STCSM2019-11-20 Grant,China(Grant No.19142202700)。
文摘High resolution Fresnel zone plates for nanoscale three-dimensional imaging of materials by both soft and hard x-rays are increasingly needed by the broad applications in nanoscience and nanotechnology.When the outmost zone-width is shrinking down to 50 nm or even below,patterning the zone plates with high aspect ratio by electron beam lithography still remains a challenge because of the proximity effect.The uneven charge distribution in the exposed resist is still frequently observed even after standard proximity effect correction(PEC),because of the large variety in the line width.This work develops a new strategy,nicknamed as local proximity effect correction(LPEC),efficiently modifying the deposited energy over the whole zone plate on the top of proximity effect correction.By this way,50 nm zone plates with the aspect ratio from 4:1 up to 15:1 and the duty cycle close to 0.5 have been fabricated.Their imaging capability in soft(1.3 keV)and hard(9 keV)x-ray,respectively,has been demonstrated in Shanghai Synchrotron Radiation Facility(SSRF)with the resolution of 50 nm.The local proximity effect correction developed in this work should also be generally significant for the generation of zone plates with high resolutions beyond 50 nm.
文摘A new method for determining proximity parameters α,β ,and η in electron beam lithography is introduced on the assumption that the point exposure spread function is composed of two Gaussians.A single line is used as test pattern to determine proximity effect parameters and the normalization approach is adopted in experimental data transaction in order to eliminate the need of measuring exposure clearing dose of the resist.Furthermore,the parameters acquired by this method are successfully used for proximity effect correction in electron beam lithography on the same experimental conditions.
基金the National Natural Science Foundation of China(No.20704042)the Shanghai Pujiang Talent Plan(No.07PJ14095)+1 种基金the CAS Knowledge Innovation Programthe Committee of Science and Technology of Shanghai(Nos.06XD14020,07JC14058,0752nm016)~~
文摘We describe the fabrication of metal nanogaps of sub-20nm in feature size using the proximity effect in electron beam lithography （EBL）. The proximity effect is extended to develop a flexible and practical method for preparing metal （e. g. Au or Ag） nanogaps and arrays in combination with a transfer process （e. g., deposition/lift-off）. Different from the direct gap-writing process,the nanogap precursor structures （nanoconnections） were designed by GDSII software and then written by electron beam. Following a deposition and lift-off process, the metal nanogaps were obtained and the nanogap size can be lowered to -10nm by controlling the exposure dose in EBL.
基金Project supported by the National Natural Science Foundation of China(Nos.60506017,60776059)the National High Technology Research and Development Program of China(No.2007AA03Z303).
文摘A novel simple dose-compensation method is developed for proximity effect correction in electron-beam lithography.The sizes of exposed patterns depend on dose factors while other exposure parameters（including accelerate voltage,resist thickness,exposing step size,substrate material,and so on） remain constant.This method is based on two reasonable assumptions in the evaluation of the compensated dose factor：one is that the relation between dose factors and circle-diameters is linear in the range under consideration;the other is that the compensated dose factor is only affected by the nearest neighbors for simplicity.Four-layer-hexagon photonic crystal structures were fabricated as test patterns to demonstrate this method.Compared to the uncorrected structures,the homogeneity of the corrected hole-size in photonic crystal structures was clearly improved.
