The formulae for parameters of a negative electron affinity semiconductor(NEAS)with large mean escape depth of secondary electrons A(NEASLD)are deduced.The methods for obtaining parameters such asλ,B,E_(pom)and the m...The formulae for parameters of a negative electron affinity semiconductor(NEAS)with large mean escape depth of secondary electrons A(NEASLD)are deduced.The methods for obtaining parameters such asλ,B,E_(pom)and the maximumδandδat 100.0 keV≥E_(po)≥1.0 keV of a NEASLD with the deduced formulae are presented(B is the probability that an internal secondary electron escapes into the vacuum upon reaching the emission surface of the emitter,δis the secondary electron yield,E_(po)is the incident energy of primary electrons and E_(pom)is the E_(po)corresponding to the maximumδ).The parameters obtained here are analyzed,and it can be concluded that several parameters of NEASLDs obtained by the methods presented here agree with those obtained by other authors.The relation between the secondary electron emission and photoemission from a NEAS with large mean escape depth of excited electrons is investigated,and it is concluded that the presented method of obtaining A is more accurate than that of obtaining the corresponding parameter for a NEAS with largeλ_(ph)(λ_(ph)being the mean escape depth of photoelectrons),and that the presented method of calculating B at E_(po)>10.0 keV is more widely applicable for obtaining the corresponding parameters for a NEAS with largeλ_(ph).展开更多
Considering the significance of low-energy electrons(LEEs;0–20 eV) in radiobiology, the sensitization potential of gold nanoparticles(AuNPs) as high-flux LEE emitters when irradiated with sub-keV electrons has been s...Considering the significance of low-energy electrons(LEEs;0–20 eV) in radiobiology, the sensitization potential of gold nanoparticles(AuNPs) as high-flux LEE emitters when irradiated with sub-keV electrons has been suggested. In this study, a track-structure Monte Carlo simulation code using the dielectric theory was developed to simulate the transport of electrons below 50 keV in gold. In this code, modifications, particularly for elastic scattering, are implemented for a more precise description of the LEE emission in secondary electron emission. This code was validated using the secondary electron yield and backscattering coefficient. To ensure dosimetry accuracy, we further verified the code for energy deposition calculations using the Monte Carlo toolkit, Geant4. The development of this code provides a basis for future studies regarding the role of AuNPs in targeted radionuclide radiotherapy.展开更多
Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed...Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed, and the factors affecting the emitted charges were analyzed. The results indicated that the major emitted charges from the trigger device were induced by surface plasma generated by surface flashover occurring on the trigger dielectric material. The emitted charges and the peak emission current increased linearly with the change in the trigger voltage and bias voltage. The emitted charges collected from the anode were affected by the gap distance. However, the emitted charges were less affected by the anode diameter. Furthermore, the emitted charges and the peak emission current decreased rapidly with the increase in gas pressure in a range from 0 Pa to 100 Pa, and then remained stable or changed slightly when the increase in gas pressure up to 2400 Pa.展开更多
Hollow cathode researches used to focus on the inner cavity or downstream plume,however,rarely on the gap between the throttling orifice plate and the keeper plate(T-K gap),which was found to impact the self-sustainin...Hollow cathode researches used to focus on the inner cavity or downstream plume,however,rarely on the gap between the throttling orifice plate and the keeper plate(T-K gap),which was found to impact the self-sustaining margin of hollow cathode discharge in this paper.Near the lower margin,the main power deposition and electron emission and ionization regions would migrate from inner cavity and downstream plume to the T-K gap,in which case,the source and destination of each m A current therein matter for the self-sustaining capability.Changing the metal surfaces in the T-K gap with emissive materials proved effective in lowering the lower margin by supplementing auxiliary thermionic emission,compensating electron loss on cold absorbing walls and suppressing discharge oscillations.By doing so,the lower margin of a 4 A hollow cathode was lowered from 1 to 0.1-0.2 A,enabling it to couple with low power Hall thruster without extra keeper current.展开更多
The carbonizing process and its influence on the thermionic electron emission properties of Mo-La_2O_3 cathode materials were investigated. The carbonized temperature, carbonized time and the pressure of C_6H_6 are ke...The carbonizing process and its influence on the thermionic electron emission properties of Mo-La_2O_3 cathode materials were investigated. The carbonized temperature, carbonized time and the pressure of C_6H_6 are key factors of the carbonizing process. The carbonized ratio of Mo-La_2O_3 cathode increases with the increase of carbonizing temperature at low temperature. The highest carbonized ratio is 19.7% obtained at 1723 K, then the carbonized ratio decreases rapidly if temperature increases further. The carbonized ratio increases with the prolongation of carbonizing time during the process of first 6 min., after that the carbonization ratio changes little with the time increase, and the carbonized ratio increases with the increase of the C_6H_6 pressure when the pressure is low, the maximum carbonized ratio reaches 19.7% at 1.5×10^(-2) Pa, then the carbonized ratio goes down sharply when the C_6H_6 pressure is over 1.5×10^(-2) Pa. The emission properties at different operated temperatures and the emission current stability of FU-6051 tubes (equipped) with Mo-La_2O_3 cathodes were also studied in the article. The study results indicate that the emission can keep stable only when the operating temperature is from 1700 to 1800 K and the carbonized layer must be composed by Mo_2C only. The FU-6051 tubes (equipped) with Mo-La_2O_3 cathodes have excellent stable emission current and the lifetime exceeds 3000 h when the cathode′s carbonized ratio is 19.7% operated at 1773 K.展开更多
In this paper, a two-dimensional physical model is established in a Hall thruster sheath region to investigate the influences of the electron temperature and the propellant on the sheath potential drop and the seconda...In this paper, a two-dimensional physical model is established in a Hall thruster sheath region to investigate the influences of the electron temperature and the propellant on the sheath potential drop and the secondary electron emission in the Hall thruster, by the particle-in-cell (PIC) method. The numerical results show that when the electron temperature is relatively low, the change of sheath potential drop is relatively large, the surface potential maintains a stable value and the stability of the sheath is good. When the electron temperature is relatively high, the surface potential maintains a persistent oscillation, and the stability of the sheath reduces. As the electron temperature increases, the secondary electron emission coefficient on the wall increases. For three kinds of propellants (At, Kr, and Xe), as the ion mass increases the sheath potentials and the secondary electron emission coefficients reduce in sequence.展开更多
A preliminary investigation is conducted to study the characteristics of sheath damping near a dielectric wall with secondary electron emission (SEE). Making use of the linear analysis of the sheath stability, we ha...A preliminary investigation is conducted to study the characteristics of sheath damping near a dielectric wall with secondary electron emission (SEE). Making use of the linear analysis of the sheath stability, we have found two major contributions to the sheath damping, one similar to the Landau damping in uniform plasmas and another determined by local electric field and electron density of the steady-state sheath. It indicates that in a classical sheath regime the damping in the sheath region monotonically increases towards the wall and decreases with the enhancement of SEE effect. In order to verify the theoretical analysis, sheath oscillation processes induced by an initial disturbance are simulated with a time-dependent one-dimensional (1D) sheath model. Numerical results obtained are consistent with the theoretical analysis qualitatively.展开更多
The electron emission yield is measured from the tungsten surface bombarded by the protons in an energy range of 50keV–250keV at different temperatures.In our experimental results,the total electron emission yield,wh...The electron emission yield is measured from the tungsten surface bombarded by the protons in an energy range of 50keV–250keV at different temperatures.In our experimental results,the total electron emission yield,which contains mainly the kinetic electron emission yield,has a very similar change trend to the electronic stopping power.At the same time,it is found that the ratio of total electron emission yield to electronic stopping power becomes smaller as the incident ion energy increases.The experimental result is explained by the ionization competition mechanism between electrons in different shells of the target atom.The explanation is verified by the opposite trends to the incident energy between the ionization cross section of M and outer shells.展开更多
This study investigates two secondary electron emission(SEE)models for photoelectric energy distribution curves f(E_(ph),hγ),B,E_(mean),absolute quantum efficiency(AQE),and the mean escape depth of photo-emitted elec...This study investigates two secondary electron emission(SEE)models for photoelectric energy distribution curves f(E_(ph),hγ),B,E_(mean),absolute quantum efficiency(AQE),and the mean escape depth of photo-emitted electronsλof metals.The proposed models are developed from the density of states and the theories of photo-emission in the vacuum ultraviolet and SEE,where B is the mean probability that an internal photo-emitted electron escapes into vacuum upon reaching the emission surface of the metal,and E_(mean)is the mean energy of photo-emitted electrons measured from vacuum.The formulas for f(E_(ph),hγ),B,λ,E_(mean),and AQE that were obtained were shown to be correct for the cases of Au at hγ=8.1–11.6 eV,Ni at hγ=9.2–11.6 eV,and Cu at hγ=7.7–11.6 eV.The photoelectric cross sections(PCS)calculated here are analyzed,and it was confirmed that the calculated PCS of the electrons in the conduction band of Au at hγ=8.1–11.6eV,Ni at hγ=9.2–11.6 eV,and Cu at hγ=7.7–11.6 eV are correct.展开更多
Secondary electron yields for Ar^+ impact on 6LiF, 7LiF and MgF2 thin films grown on aluminum substrates are measured each as a function of target temperature and projectile energy. Remarkably different behaviours of...Secondary electron yields for Ar^+ impact on 6LiF, 7LiF and MgF2 thin films grown on aluminum substrates are measured each as a function of target temperature and projectile energy. Remarkably different behaviours of the electron yields for LiF and MgF2 films are observed in a temperature range from 25 ℃ to 300 ℃. The electron yield of LiF is found to sharply increase with target temperature and to be saturated at about 175 ℃. But the target temperature has no effect on the electron yield of MgF2. It is also found that for the ion energies greater than 4 keV, the electron yield of 6LiF is consistently high as compared with that of 7LiF that may be due to the enhanced contribution of recoiling 6Li atoms to the secondary electron generation. A comparison between the electron yields of MgF2 and LiF reveales that above a certain ion energy the electron yield of MgF2 is considerably low as compared with that of LiF. We suggest that the short inelastic mean free path of electrons in MgF2 can be one of the reasons for its low electron yield.展开更多
Dielectric barrier discharge(DBD)has been extensively investigated in the fields of environment and energy,whereas its practical implementation is still limited due to its unsatisfactory energy efficiency.In order to ...Dielectric barrier discharge(DBD)has been extensively investigated in the fields of environment and energy,whereas its practical implementation is still limited due to its unsatisfactory energy efficiency.In order to improve the energy efficiency of DBD,a novel double dielectric barrier discharge(NDDBD)reactor with high field emission and secondary electron emission was developed and compared with traditional DDBD(TDDBD)configuration.Firstly,the discharge characteristics of the two DDBD reactors were analyzed.Compared to TDDBD,the NDDBD reactor exhibited much stronger discharge intensity,higher transferred charge,dissipated power and gas temperature due to the effective utilization of cathode field emission and secondary electron emission.Subsequently,toluene abatement performance of the two reactors was evaluated.The toluene decomposition efficiency and mineralization rate of NDDBD were much higher than that of TDDBD,which were 86.44%-100%versus 28.17%-80.48%and 17.16%-43.42%versus 7.17%-16.44%at 2.17-15.12 W and 1.24-4.90 W respectively.NDDBD also exhibited higher energy yield than TDDBD,whereas the overall energy constant k_(overall)of the two reactors were similar.Finally,plausible toluene decomposition pathway in TDDBD and NDDBD was suggested based on organic intermediates that generated from toluene degradation.The finding of this study is expected to provide reference for the design and optimization of DBD reactor for volatile organic compounds control and other applications.展开更多
The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,...The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,and the secondary electron emission(SEE)characteristics for the VGN structure are studied.The COMSOL simulation and the scanning electron microscope(SEM)image analysis are carried out to study the secondary electron yield(SEY).The effect of aspect ratio and packing density of VGN on SEY under normal incident condition are studied.The results show that the VGN structure has a good effect on suppressing SEE.展开更多
This paper reports that the charging properties of lead silica, Suprasil silica and Infrasil silica are investigated by measuring the secondary electron emission (SEE) yield. At a primary electron beam energy of 25 ...This paper reports that the charging properties of lead silica, Suprasil silica and Infrasil silica are investigated by measuring the secondary electron emission (SEE) yield. At a primary electron beam energy of 25 keV, the intrinsic SEE yields measured at very low injection dose are 0.54, 0.29 and 0.35, respectively for lead silica, Suprasil and Infrasil silica glass. During the first e-beam irradiation at a high injection current density, the SEE yields of lead silica and Suprasil increase continuously and slowly from their initial values to a steady state. At the steady state, the SEE yields of lead silica and Suprasil are 0.94 and 0.93, respectively. In Infrasil, several charging and discharging processes are observed during the experiment. This shows that Infrasil does not reach its steady state. Two hours later, all samples are irradiated again in the same place as the first irradiation at a low current density and low dose. The SEE yields of lead silica, Suprasil and Infrasil are 0.69, 0.76 and 0.55, respectively. Twenty hours later, the values are 0.62, 0.64 and 0.33, respectively, for lead silica, Suprasil and Infrasil. These results show that Infrasil has poor charging stability. Comparatively, the charging stability of lead silica is better, and Suprasil has the best characteristics.展开更多
As a typical two-dimensional(2D) coating material, graphene has been utilized to effectively reduce secondary electron emission from the surface. Nevertheless, the microscopic mechanism and the dominant factor of seco...As a typical two-dimensional(2D) coating material, graphene has been utilized to effectively reduce secondary electron emission from the surface. Nevertheless, the microscopic mechanism and the dominant factor of secondary electron emission suppression remain controversial. Since traditional models rely on the data of experimental bulk properties which are scarcely appropriate to the 2D coating situation, this paper presents the first-principles-based numerical calculations of the electron interaction and emission process for monolayer and multilayer graphene on silicon(111) substrate. By using the anisotropic energy loss for the coating graphene, the electron transport process can be described more realistically. The real physical electron interactions, including the elastic scattering of electron-nucleus, inelastic scattering of the electron-extranuclear electron, and electron-phonon effect, are considered and calculated by using the Monte Carlo method. The energy level transition theory-based first-principles method and the full Penn algorithm are used to calculate the energy loss function during the inelastic scattering. Variations of the energy loss function and interface electron density differences for 1 to 4 layer graphene coating Go Si are calculated, and their inner electron distributions and secondary electron emissions are analyzed. Simulation results demonstrate that the dominant factor of the inhibiting of secondary electron yield(SEY) of Go Si is to induce the deeper electrons in the internal scattering process. In contrast, a low surface potential barrier due to the positive deviation of electron density difference at monolayer Go Si interface in turn weakens the suppression of secondary electron emission of the graphene layer. Only when the graphene layer number is 3, does the contribution of surface work function to the secondary electron emission suppression appear to be slightly positive.展开更多
A one-dimensional slab model of the plasma sheath in the stationary plasma thruster (SPT) chamber is developed in this study. It is considered that secondary electrons emitted from ceramic walls are partially trappe...A one-dimensional slab model of the plasma sheath in the stationary plasma thruster (SPT) chamber is developed in this study. It is considered that secondary electrons emitted from ceramic walls are partially trapped by the bulk plasma in the SPT chamber; some secondary electrons drift across the sheath where they are generated and the bulk and move towards the opposite sheath. Thus both the secondary electron emission (SEE) from one sheath and the partially trapped secondary electrons from the opposite sheath contribute to this sheath. The results indicate that both the SEE coefficient and trapping coefficient have a significant impact not only on the distributions of both electrons and ions of the SPT sheath but also on the energy flux loss to the SPT wall. When the trapping coefficient increases, the energy flux of electrons deposited to the walls will increase whereas that of ions will decrease. Besides, the critical electron temperature will decrease greatly with the increase of the trapping coefficient.展开更多
Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surfa...Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surface topography. The results show that when the characteristic length scale of the surface, G, is larger than 1 × 10^(-7), the surface roughness increases with the increasing fractal dimension D. When the surface roughness becomes larger, it is difficult for entered electrons to escape surface. As a result, more electrons are collected and then SEY decreases. When G is less than 1 × 10^(-7),the effect of the surface topography can be ignored, and the SEY almost has no change as the dimension D increases. Then,the multipactor thresholds of a C-band rectangular impedance transfer and an ultrahigh-frequency-band coaxial impedance transfer are predicted by the relationship between the SEY and the fractal parameters. It is verified that for practical microwave devices, the larger the parameter G is, the higher the multipactor threshold is. Also, the larger the value of D,the higher the multipactor threshold.展开更多
The slices of Cu-Al-Mg alloys with thickness of 0.1mm were prepared. Some samples were activated at the temperature of 590°C and 620°C respectively. The secondary electron emission (SEE) factor (σ) was dete...The slices of Cu-Al-Mg alloys with thickness of 0.1mm were prepared. Some samples were activated at the temperature of 590°C and 620°C respectively. The secondary electron emission (SEE) factor (σ) was determined. The composition of surface and the electron binding energy were studied by means of XPS and AES. It is shown that the oxide mainly consisting of Al2O3 and MgO can be formed spontaneously at room temperature. This oxide layer exhibits lower electron binding energy, high σ and satisfactory stability.展开更多
A one-dimensional(1D) fluid model of capacitive RF argon glow discharges between two parallel-plate electrodes at low pressure is employed. The influence of the secondary electron emission on the plasma characterist...A one-dimensional(1D) fluid model of capacitive RF argon glow discharges between two parallel-plate electrodes at low pressure is employed. The influence of the secondary electron emission on the plasma characteristics in the discharges is investigated numerically by the model. The results show that as the secondary electron emission coefficient increases,the cycle-averaged electric field has almost no change; the cycle-averaged electron temperature in the bulk plasma almost does not change, but it increases in the two sheath regions; the cycle-averaged ionization rate, electron density, electron current density, ion current density, and total current density all increase. Also, the cycle-averaged secondary electron fluxes on the surfaces of the electrodes increase as the secondary electron emission coefficient increases. The evolutions of the electron flux, the secondary electron flux and the ion flux on the powered electrode increase as the secondary electron emission coefficient increases. The cycle-averaged electron pressure heating, electron Ohmic heating, electron heating, and ion heating in the two sheath regions increase as the secondary electron emission coefficient increases. The cycle-averaged electron energy loss increases with increasing secondary electron emission coefficient.展开更多
Feedback is said to exist in any amplifier when the fraction of output power in fed back as an input.Similarly,in gaseous discharge ions that incident on the cathode act as a natural feedback element to stabilize and ...Feedback is said to exist in any amplifier when the fraction of output power in fed back as an input.Similarly,in gaseous discharge ions that incident on the cathode act as a natural feedback element to stabilize and self sustain the discharge.The present investigation is intended to emphasize the feedback nature of ions that emits secondary electrons(SEs)from the cathode surface in DC gas discharges.The average number of SEs emitted per incident ion and non ionic species(energetic neutrals,metastables and photons)which results from ion is defined as effective secondary electronemission coefficient(ESEEC,Eg).In this study,we derive an analytic expression that corroborates the relation betweenEg and power influx by ion to the cathode based on the feedback theory of an amplifier.In addition,experimentally,we confirmed the typical positive feedback nature of SEEfrom the cathode in argon DC glow discharges.The experiment is done for three different cathode material of same dimension(tungsten(W),copper(Cu)and brass)under identical discharge conditions(pressure:0.45 mbar,cathode bias:-600 V,discharge gab:15 cm and operating gas:argon).Further,we found that theEg value of these cathode material controls the amount of feedback power given by ions.The difference in feedback leads different final output i.e the power carried by ion at cathode(Pi C¢∣).The experimentally obtained value of Pi C¢∣is 4.28 W,6.87 W and9.26 W respectively for W,Cu and brass.In addition,the present investigation reveals that the amount of feedback power in a DC gas discharges not only affect the fraction of power fed back to the cathode but also the entire characteristics of the discharge.展开更多
Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is appli...Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%(10%for the axial output relativistic magnetron),decreases the anode current by about 5%(5%for the axial output relativistic magnetron),and leads to a decrease of electronic efficiency by 8%(6%for the axial output relativistic magnetron).The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11873013)。
文摘The formulae for parameters of a negative electron affinity semiconductor(NEAS)with large mean escape depth of secondary electrons A(NEASLD)are deduced.The methods for obtaining parameters such asλ,B,E_(pom)and the maximumδandδat 100.0 keV≥E_(po)≥1.0 keV of a NEASLD with the deduced formulae are presented(B is the probability that an internal secondary electron escapes into the vacuum upon reaching the emission surface of the emitter,δis the secondary electron yield,E_(po)is the incident energy of primary electrons and E_(pom)is the E_(po)corresponding to the maximumδ).The parameters obtained here are analyzed,and it can be concluded that several parameters of NEASLDs obtained by the methods presented here agree with those obtained by other authors.The relation between the secondary electron emission and photoemission from a NEAS with large mean escape depth of excited electrons is investigated,and it is concluded that the presented method of obtaining A is more accurate than that of obtaining the corresponding parameter for a NEAS with largeλ_(ph)(λ_(ph)being the mean escape depth of photoelectrons),and that the presented method of calculating B at E_(po)>10.0 keV is more widely applicable for obtaining the corresponding parameters for a NEAS with largeλ_(ph).
基金supported by the National Natural Science Foundation of China (Nos. 12004180, 21906083, 11975122, and 22006067)the Natural Science Foundation of Jiangsu Province (No. BK20190384)the Fundamental Research Funds for the Central Universities (Nos. NE2020006, NS2022095)。
文摘Considering the significance of low-energy electrons(LEEs;0–20 eV) in radiobiology, the sensitization potential of gold nanoparticles(AuNPs) as high-flux LEE emitters when irradiated with sub-keV electrons has been suggested. In this study, a track-structure Monte Carlo simulation code using the dielectric theory was developed to simulate the transport of electrons below 50 keV in gold. In this code, modifications, particularly for elastic scattering, are implemented for a more precise description of the LEE emission in secondary electron emission. This code was validated using the secondary electron yield and backscattering coefficient. To ensure dosimetry accuracy, we further verified the code for energy deposition calculations using the Monte Carlo toolkit, Geant4. The development of this code provides a basis for future studies regarding the role of AuNPs in targeted radionuclide radiotherapy.
基金supported by the New Century Talent Foundation of Ministry of Education of China (NCET-08-0438)
文摘Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed, and the factors affecting the emitted charges were analyzed. The results indicated that the major emitted charges from the trigger device were induced by surface plasma generated by surface flashover occurring on the trigger dielectric material. The emitted charges and the peak emission current increased linearly with the change in the trigger voltage and bias voltage. The emitted charges collected from the anode were affected by the gap distance. However, the emitted charges were less affected by the anode diameter. Furthermore, the emitted charges and the peak emission current decreased rapidly with the increase in gas pressure in a range from 0 Pa to 100 Pa, and then remained stable or changed slightly when the increase in gas pressure up to 2400 Pa.
基金National Natural Science Foundation of China(Nos.61571166 and 51736003)for supporting the research。
文摘Hollow cathode researches used to focus on the inner cavity or downstream plume,however,rarely on the gap between the throttling orifice plate and the keeper plate(T-K gap),which was found to impact the self-sustaining margin of hollow cathode discharge in this paper.Near the lower margin,the main power deposition and electron emission and ionization regions would migrate from inner cavity and downstream plume to the T-K gap,in which case,the source and destination of each m A current therein matter for the self-sustaining capability.Changing the metal surfaces in the T-K gap with emissive materials proved effective in lowering the lower margin by supplementing auxiliary thermionic emission,compensating electron loss on cold absorbing walls and suppressing discharge oscillations.By doing so,the lower margin of a 4 A hollow cathode was lowered from 1 to 0.1-0.2 A,enabling it to couple with low power Hall thruster without extra keeper current.
文摘The carbonizing process and its influence on the thermionic electron emission properties of Mo-La_2O_3 cathode materials were investigated. The carbonized temperature, carbonized time and the pressure of C_6H_6 are key factors of the carbonizing process. The carbonized ratio of Mo-La_2O_3 cathode increases with the increase of carbonizing temperature at low temperature. The highest carbonized ratio is 19.7% obtained at 1723 K, then the carbonized ratio decreases rapidly if temperature increases further. The carbonized ratio increases with the prolongation of carbonizing time during the process of first 6 min., after that the carbonization ratio changes little with the time increase, and the carbonized ratio increases with the increase of the C_6H_6 pressure when the pressure is low, the maximum carbonized ratio reaches 19.7% at 1.5×10^(-2) Pa, then the carbonized ratio goes down sharply when the C_6H_6 pressure is over 1.5×10^(-2) Pa. The emission properties at different operated temperatures and the emission current stability of FU-6051 tubes (equipped) with Mo-La_2O_3 cathodes were also studied in the article. The study results indicate that the emission can keep stable only when the operating temperature is from 1700 to 1800 K and the carbonized layer must be composed by Mo_2C only. The FU-6051 tubes (equipped) with Mo-La_2O_3 cathodes have excellent stable emission current and the lifetime exceeds 3000 h when the cathode′s carbonized ratio is 19.7% operated at 1773 K.
基金supported by the National Natural Science Foundation of China(Grant Nos.10975026,11275034,and 11175052)the Key Project of Science andTechnology of Liaoning Province,China(Grant No.2011224007)the Fundamental Research Funds for the Central Universities of Ministry of Educationof China(Grant No.3132014328)
文摘In this paper, a two-dimensional physical model is established in a Hall thruster sheath region to investigate the influences of the electron temperature and the propellant on the sheath potential drop and the secondary electron emission in the Hall thruster, by the particle-in-cell (PIC) method. The numerical results show that when the electron temperature is relatively low, the change of sheath potential drop is relatively large, the surface potential maintains a stable value and the stability of the sheath is good. When the electron temperature is relatively high, the surface potential maintains a persistent oscillation, and the stability of the sheath reduces. As the electron temperature increases, the secondary electron emission coefficient on the wall increases. For three kinds of propellants (At, Kr, and Xe), as the ion mass increases the sheath potentials and the secondary electron emission coefficients reduce in sequence.
基金Project supported by the National Natural Science Foundation for Distinguished Young Scholars (Grant No. 50925625)the National Natural Science Foundation of China (Grant Nos. 10975026 and 10875024)the Scientific Research Foundation of the Higher Educational Institutions of Liaoning Education Bureau of China (Grant No. 2009A047)
文摘A preliminary investigation is conducted to study the characteristics of sheath damping near a dielectric wall with secondary electron emission (SEE). Making use of the linear analysis of the sheath stability, we have found two major contributions to the sheath damping, one similar to the Landau damping in uniform plasmas and another determined by local electric field and electron density of the steady-state sheath. It indicates that in a classical sheath regime the damping in the sheath region monotonically increases towards the wall and decreases with the enhancement of SEE effect. In order to verify the theoretical analysis, sheath oscillation processes induced by an initial disturbance are simulated with a time-dependent one-dimensional (1D) sheath model. Numerical results obtained are consistent with the theoretical analysis qualitatively.
基金the National Natural Science Foundation of China(Grant Nos.11605147,11375138,and 11505248)the Natural Science Basic Research Plan in Shaanxi Province,China(Grant Nos.2019JQ-493 and 2021JQ-812)+2 种基金the Scientific Research Program Funded by Shaanxi Provincial Education Department,Shaanxi Province,China(Grant Nos.20JK0975 and 16JK1824)the Shaanxi University Young Outstanding Talents Support Program,the Xianyang Normal University Young and Middle-aged Top-notch Talents Project,Shaanxi Province,China(Grant No.XSYBJ202004)the Academic Leader Project of Xianyang Normal University,Shaanxi Province,China(Grant No.XSYXSDT202109)。
文摘The electron emission yield is measured from the tungsten surface bombarded by the protons in an energy range of 50keV–250keV at different temperatures.In our experimental results,the total electron emission yield,which contains mainly the kinetic electron emission yield,has a very similar change trend to the electronic stopping power.At the same time,it is found that the ratio of total electron emission yield to electronic stopping power becomes smaller as the incident ion energy increases.The experimental result is explained by the ionization competition mechanism between electrons in different shells of the target atom.The explanation is verified by the opposite trends to the incident energy between the ionization cross section of M and outer shells.
基金supported by the National Natural Science Foundation of China (No.11873013)
文摘This study investigates two secondary electron emission(SEE)models for photoelectric energy distribution curves f(E_(ph),hγ),B,E_(mean),absolute quantum efficiency(AQE),and the mean escape depth of photo-emitted electronsλof metals.The proposed models are developed from the density of states and the theories of photo-emission in the vacuum ultraviolet and SEE,where B is the mean probability that an internal photo-emitted electron escapes into vacuum upon reaching the emission surface of the metal,and E_(mean)is the mean energy of photo-emitted electrons measured from vacuum.The formulas for f(E_(ph),hγ),B,λ,E_(mean),and AQE that were obtained were shown to be correct for the cases of Au at hγ=8.1–11.6 eV,Ni at hγ=9.2–11.6 eV,and Cu at hγ=7.7–11.6 eV.The photoelectric cross sections(PCS)calculated here are analyzed,and it was confirmed that the calculated PCS of the electrons in the conduction band of Au at hγ=8.1–11.6eV,Ni at hγ=9.2–11.6 eV,and Cu at hγ=7.7–11.6 eV are correct.
基金Project partially supported by the Higher Education Commission of Pakistan through indigenous PhD program
文摘Secondary electron yields for Ar^+ impact on 6LiF, 7LiF and MgF2 thin films grown on aluminum substrates are measured each as a function of target temperature and projectile energy. Remarkably different behaviours of the electron yields for LiF and MgF2 films are observed in a temperature range from 25 ℃ to 300 ℃. The electron yield of LiF is found to sharply increase with target temperature and to be saturated at about 175 ℃. But the target temperature has no effect on the electron yield of MgF2. It is also found that for the ion energies greater than 4 keV, the electron yield of 6LiF is consistently high as compared with that of 7LiF that may be due to the enhanced contribution of recoiling 6Li atoms to the secondary electron generation. A comparison between the electron yields of MgF2 and LiF reveales that above a certain ion energy the electron yield of MgF2 is considerably low as compared with that of LiF. We suggest that the short inelastic mean free path of electrons in MgF2 can be one of the reasons for its low electron yield.
基金financially supported by National Key R&D Program of China(No.2017YFC0212204)Key Research and Development Program of Shaanxi Province(No.2018ZDCXL-SF-02-04)。
文摘Dielectric barrier discharge(DBD)has been extensively investigated in the fields of environment and energy,whereas its practical implementation is still limited due to its unsatisfactory energy efficiency.In order to improve the energy efficiency of DBD,a novel double dielectric barrier discharge(NDDBD)reactor with high field emission and secondary electron emission was developed and compared with traditional DDBD(TDDBD)configuration.Firstly,the discharge characteristics of the two DDBD reactors were analyzed.Compared to TDDBD,the NDDBD reactor exhibited much stronger discharge intensity,higher transferred charge,dissipated power and gas temperature due to the effective utilization of cathode field emission and secondary electron emission.Subsequently,toluene abatement performance of the two reactors was evaluated.The toluene decomposition efficiency and mineralization rate of NDDBD were much higher than that of TDDBD,which were 86.44%-100%versus 28.17%-80.48%and 17.16%-43.42%versus 7.17%-16.44%at 2.17-15.12 W and 1.24-4.90 W respectively.NDDBD also exhibited higher energy yield than TDDBD,whereas the overall energy constant k_(overall)of the two reactors were similar.Finally,plausible toluene decomposition pathway in TDDBD and NDDBD was suggested based on organic intermediates that generated from toluene degradation.The finding of this study is expected to provide reference for the design and optimization of DBD reactor for volatile organic compounds control and other applications.
基金supported by the National Natural Science Foundation of China(Grant No.11975163)。
文摘The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,and the secondary electron emission(SEE)characteristics for the VGN structure are studied.The COMSOL simulation and the scanning electron microscope(SEM)image analysis are carried out to study the secondary electron yield(SEY).The effect of aspect ratio and packing density of VGN on SEY under normal incident condition are studied.The results show that the VGN structure has a good effect on suppressing SEE.
基金supported by the European Commission in the framework of the GLAMOROUS contract (ref. IST2000-28366)
文摘This paper reports that the charging properties of lead silica, Suprasil silica and Infrasil silica are investigated by measuring the secondary electron emission (SEE) yield. At a primary electron beam energy of 25 keV, the intrinsic SEE yields measured at very low injection dose are 0.54, 0.29 and 0.35, respectively for lead silica, Suprasil and Infrasil silica glass. During the first e-beam irradiation at a high injection current density, the SEE yields of lead silica and Suprasil increase continuously and slowly from their initial values to a steady state. At the steady state, the SEE yields of lead silica and Suprasil are 0.94 and 0.93, respectively. In Infrasil, several charging and discharging processes are observed during the experiment. This shows that Infrasil does not reach its steady state. Two hours later, all samples are irradiated again in the same place as the first irradiation at a low current density and low dose. The SEE yields of lead silica, Suprasil and Infrasil are 0.69, 0.76 and 0.55, respectively. Twenty hours later, the values are 0.62, 0.64 and 0.33, respectively, for lead silica, Suprasil and Infrasil. These results show that Infrasil has poor charging stability. Comparatively, the charging stability of lead silica is better, and Suprasil has the best characteristics.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61901360 and 12175176)the Natural Science Foundation of Shaanxi Province, China (Grant No. 2020JQ-644)the Scientific Research Projects of the Shaanxi Education Department, China (Grant No. 20JK0808)。
文摘As a typical two-dimensional(2D) coating material, graphene has been utilized to effectively reduce secondary electron emission from the surface. Nevertheless, the microscopic mechanism and the dominant factor of secondary electron emission suppression remain controversial. Since traditional models rely on the data of experimental bulk properties which are scarcely appropriate to the 2D coating situation, this paper presents the first-principles-based numerical calculations of the electron interaction and emission process for monolayer and multilayer graphene on silicon(111) substrate. By using the anisotropic energy loss for the coating graphene, the electron transport process can be described more realistically. The real physical electron interactions, including the elastic scattering of electron-nucleus, inelastic scattering of the electron-extranuclear electron, and electron-phonon effect, are considered and calculated by using the Monte Carlo method. The energy level transition theory-based first-principles method and the full Penn algorithm are used to calculate the energy loss function during the inelastic scattering. Variations of the energy loss function and interface electron density differences for 1 to 4 layer graphene coating Go Si are calculated, and their inner electron distributions and secondary electron emissions are analyzed. Simulation results demonstrate that the dominant factor of the inhibiting of secondary electron yield(SEY) of Go Si is to induce the deeper electrons in the internal scattering process. In contrast, a low surface potential barrier due to the positive deviation of electron density difference at monolayer Go Si interface in turn weakens the suppression of secondary electron emission of the graphene layer. Only when the graphene layer number is 3, does the contribution of surface work function to the secondary electron emission suppression appear to be slightly positive.
基金supported by National Natural Science Foundation of China(Nos.10605008,10875024)
文摘A one-dimensional slab model of the plasma sheath in the stationary plasma thruster (SPT) chamber is developed in this study. It is considered that secondary electrons emitted from ceramic walls are partially trapped by the bulk plasma in the SPT chamber; some secondary electrons drift across the sheath where they are generated and the bulk and move towards the opposite sheath. Thus both the secondary electron emission (SEE) from one sheath and the partially trapped secondary electrons from the opposite sheath contribute to this sheath. The results indicate that both the SEE coefficient and trapping coefficient have a significant impact not only on the distributions of both electrons and ions of the SPT sheath but also on the energy flux loss to the SPT wall. When the trapping coefficient increases, the energy flux of electrons deposited to the walls will increase whereas that of ions will decrease. Besides, the critical electron temperature will decrease greatly with the increase of the trapping coefficient.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U1537211 and 61901361)。
文摘Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surface topography. The results show that when the characteristic length scale of the surface, G, is larger than 1 × 10^(-7), the surface roughness increases with the increasing fractal dimension D. When the surface roughness becomes larger, it is difficult for entered electrons to escape surface. As a result, more electrons are collected and then SEY decreases. When G is less than 1 × 10^(-7),the effect of the surface topography can be ignored, and the SEY almost has no change as the dimension D increases. Then,the multipactor thresholds of a C-band rectangular impedance transfer and an ultrahigh-frequency-band coaxial impedance transfer are predicted by the relationship between the SEY and the fractal parameters. It is verified that for practical microwave devices, the larger the parameter G is, the higher the multipactor threshold is. Also, the larger the value of D,the higher the multipactor threshold.
文摘The slices of Cu-Al-Mg alloys with thickness of 0.1mm were prepared. Some samples were activated at the temperature of 590°C and 620°C respectively. The secondary electron emission (SEE) factor (σ) was determined. The composition of surface and the electron binding energy were studied by means of XPS and AES. It is shown that the oxide mainly consisting of Al2O3 and MgO can be formed spontaneously at room temperature. This oxide layer exhibits lower electron binding energy, high σ and satisfactory stability.
基金Project supported by the National Natural Science Foundation of China(Grant No.51172101)
文摘A one-dimensional(1D) fluid model of capacitive RF argon glow discharges between two parallel-plate electrodes at low pressure is employed. The influence of the secondary electron emission on the plasma characteristics in the discharges is investigated numerically by the model. The results show that as the secondary electron emission coefficient increases,the cycle-averaged electric field has almost no change; the cycle-averaged electron temperature in the bulk plasma almost does not change, but it increases in the two sheath regions; the cycle-averaged ionization rate, electron density, electron current density, ion current density, and total current density all increase. Also, the cycle-averaged secondary electron fluxes on the surfaces of the electrodes increase as the secondary electron emission coefficient increases. The evolutions of the electron flux, the secondary electron flux and the ion flux on the powered electrode increase as the secondary electron emission coefficient increases. The cycle-averaged electron pressure heating, electron Ohmic heating, electron heating, and ion heating in the two sheath regions increase as the secondary electron emission coefficient increases. The cycle-averaged electron energy loss increases with increasing secondary electron emission coefficient.
文摘Feedback is said to exist in any amplifier when the fraction of output power in fed back as an input.Similarly,in gaseous discharge ions that incident on the cathode act as a natural feedback element to stabilize and self sustain the discharge.The present investigation is intended to emphasize the feedback nature of ions that emits secondary electrons(SEs)from the cathode surface in DC gas discharges.The average number of SEs emitted per incident ion and non ionic species(energetic neutrals,metastables and photons)which results from ion is defined as effective secondary electronemission coefficient(ESEEC,Eg).In this study,we derive an analytic expression that corroborates the relation betweenEg and power influx by ion to the cathode based on the feedback theory of an amplifier.In addition,experimentally,we confirmed the typical positive feedback nature of SEEfrom the cathode in argon DC glow discharges.The experiment is done for three different cathode material of same dimension(tungsten(W),copper(Cu)and brass)under identical discharge conditions(pressure:0.45 mbar,cathode bias:-600 V,discharge gab:15 cm and operating gas:argon).Further,we found that theEg value of these cathode material controls the amount of feedback power given by ions.The difference in feedback leads different final output i.e the power carried by ion at cathode(Pi C¢∣).The experimentally obtained value of Pi C¢∣is 4.28 W,6.87 W and9.26 W respectively for W,Cu and brass.In addition,the present investigation reveals that the amount of feedback power in a DC gas discharges not only affect the fraction of power fed back to the cathode but also the entire characteristics of the discharge.
基金supported by National Natural Science Foundation of China(No.61302010)the Foundation of Science and Technology on High Power Microwave Laboratory,Central University Foundation(2013KW07)Work at the University of New Mexico in USA was supportedby ONR Grant N00014-13-1-0565
文摘Prticle-in-cell(PIC) simulations demonstrated that,when the relativistic magnetron with diffraction output(MDO) is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%(10%for the axial output relativistic magnetron),decreases the anode current by about 5%(5%for the axial output relativistic magnetron),and leads to a decrease of electronic efficiency by 8%(6%for the axial output relativistic magnetron).The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.