Measurment of the energy spectrum of an electron beam extracted from an accelerator

The electron energy spectrum is one of the most important characteristics of an electron beam that is extracted from a linear accelerator. The most direct way to determine an electron spectrum would be to use a magnetic spectrometer and this method could also give results with high precision and effectiveness. In this article we describe our design of a new multi-layer absorption method, which is based on the depth-dose curves method that can be used in most irradiation accelerators, and adds the Monte Carlo simulation and iterative algorithm in order to reconstruct the electron energy spectrum. In this article the energy spectrum was measured using these two methods, and good results were acquired. These results could be crosschecked, which made the results more reliable.

Analysis of the Power System from an Electron Beam Accelerator and the Correlation with the Theoretical Dosimetry for Radiation Processing

Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.

Laboratory observation of electron energy distribution near three-dimensional magnetic nulls

The acceleration of electrons near three-dimensional(3D)magnetic nulls is crucial to the energy conversion mechanism in the 3D magnetic reconnection process.To explore electron acceleration in a 3D magnetic null topology,we constructed a pair of 3D magnetic nulls in the PKU Plasma Test(PPT)device and observed acceleration of electrons near magnetic nulls.This study measured the plasma floating potential and ion density profiles around the 3D magnetic null.The potential wells near nulls may be related to the energy variations of electrons,so we measured the electron distribution functions(EDFs)at different spatial positions.The axial variation of EDF shows that the electrons deviate from the Maxwell distribution near magnetic nulls.With scanning probes that can directionally measure and theoretically analyze based on curve fitting,the variations of EDFs are linked to the changes of plasma potential under 3D magnetic null topology.The kinetic energy of electrons accelerated by the electric field is 6 eV(v_(e)~7v_(Alfvén-e))and the scale of the region where accelerating electrons exist is in the order of serval electron skin depths.

Experimental Study of the Recovery Times of Spark Gap Switch with Different Gases

A two-pulse method is used to determine the insulation recovery time of the gas spark gap switch with different types of gas applied in a high power accelerator with a water dielectric pulse forming line. At the breakdown voltage of 450 kV, with the vacuum diode voltage of about 200 kV, and a current of 30 kA, recovery characteristics of H2, N2, SF6 were studied. The recovery percentages of the gas breakdown voltage and vacuum diode voltage were determined. The results show that hydrogen has the best recovery characteristics. At a pulse interval of 8.8 ms, the recovery percentages of both the gas breakdown voltage and vacuum diode voltage for hydrogen exceed 95%. For SF6 and N2 with an interval of 25 ms and 50 ms respectively, a 90% voltage recovery was obtained. The experiments also proved that the repetitive rate of the high power accelerator with a pulse forming line is mainly restricted by the gas switch repetitive rate; the recovery percentages of the vacuum diode voltage are limited by the recovery percentages of the gas switch breakdown voltage. The hydrogen switch can be employed for a high repetitive rate-high power accelerator with a pulse forming line.

Non-Maxwellian electron distributions resulting from direct laser acceleration in near-critical plasmas

The irradiation of few-nm-thick targets by a finite-contrast high-intensity short-pulse laser results in a strong pre-expansion of these targets at the arrival time of the main pulse.The targets decompress to near and lower than critical densities with plasmas extending over few micrometers,i.e.multiple wavelengths.The interaction of the main pulse with such a highly localized but inhomogeneous target leads to the generation of a short channel and further self-focusing of the laser beam.Experiments at the Glass Hybrid OPCPA Scaled Test-bed(GHOST)laser system at University of Texas,Austin using such targets measured non-Maxwellian,peaked electron distribution with large bunch charge and high electron density in the laser propagation direction.These results are reproduced in 2D PIC simulations using the EPOCH code,identifying direct laser acceleration(DLA)[1]as the responsible mechanism.This is the first time that DLA has been observed to produce peaked spectra as opposed to broad,Maxwellian spectra observed in earlier experiments[2].This high-density electrons have potential applications as injector beams for a further wakefield acceleration stage as well as for pump-probe applications.

Evaluating Acceleration Ability of Electrons of SiO_2 and ZnS in ZnS∶Er Electroluminescence

In layered optimization scheme and solid state cathodoluminescence, silicon oxide plays a very important role in obtaining high energy hot electrons to excite luminescent centers or organic luminescent ma terials. The acceleration ability of electrons of SiO2 and ZnS was compared through the variation of emission intensity based on ZnS：Er phosphor during the reverse of polarity of sinusoidal voltage. The ratio of maximum emission intensity under positive and negative half period is 2.18. This result not only demonstrates that parts of primary electron comes from electrode, but electrons in conduction band of SiO2 can be heated to higher energy than that of ZnS.

Reconstruction of a 6-MeV bremsstrahlung spectrum by multi-layer absorption based on LiF:Mg, Cu, P

In this paper, TLD （LiF： Mg, Cu, P） is used as detector. A multi-layer absorption （MLA） model is designed. Combined with Monte-Carlo processes, a bremsstrahlung X-ray spectrum is reconstructed by an iterative method; the reconstructed results agree with the results of simulations by the MCNP process essentially, especially in middle energy region.

Design of S-band photoinjector with high bunch charge and low emittance based on multi-objective genetic algorithm

High-brightness electron beams are required to drive LINAC-based free-electron lasers(FELs)and storage-ring-based synchrotron radiation light sources.The bunch charge and RMS bunch length at the exit of the LINAC play a crucial role in the peak current;the minimum transverse emittance is mainly determined by the injector of the LINAC.Thus,a photoin-jector with a high bunch charge and low emittance that can simultaneously provide high-quality beams for 4th generation synchrotron radiation sources and FELs is desirable.The design of a 1.6-cell S-band 2998-MHz RF gun and beam dynamics optimization of a relevant beamline are presented in this paper.Beam dynamics simulations were performed by combining ASTRA and the multi-objective genetic algorithm NSGA II.The effects of the laser pulse shape,half-cell length of the RF gun,and RF parameters on the output beam quality were analyzed and compared.The normalized transverse emittance was optimized to be as low as 0.65 and 0.92 mm·mrad when the bunch charge was as high as 1 and 2 nC,respectively.Finally,the beam stability properties of the photoinjector,considering misalignment and RF jitter,were simulated and analyzed.

Influence of spatiotemporal coupling on the capture-and-acceleration-scenario vacuum electron acceleration by ultrashort pulsed laser beam

This paper investigates the properties of the ultrashort pulsed beam aimed to the capture-and-acceleration-scenario （CAS） vacuum electron acceleration. The result shows that the spatiotemporal distribution of the phase velocity, the longitudinal component of the electric field and the acceleration quality factor are qualitatively similar to that of the continuous-wave Gaussian beam, and are slightly influenced by the spatiotemporal coupling of the ultrashort pulsed beam. When the pulse is compressed to an ultrashort one in which the pulse duration TFWHM 〈 5T0, the variation of the maximum net energy gain due to the carrier-envelope phase is a crucial disadvantage in the CAS acceleration process.

Electron Acceleration in Wakefield and Supra-Bubble Regimes by Ultraintense Laser with Asymmetric Pulse

Electron acceleration in plasma driven by circular polarized ultraintense laser with asymmetric pulse axe investigated analytically and numerically in terms of oscillation-center Hamiltonian formalism. Studies include wakefield acceleration, which dominates in blow-out or bubble regime and snow-plow acceleration which dominates in supra-bubble regime. By a comparison with each other it is found that snow-plow acceleration has lower acceleration capability. In wakefield acceleration, there exists an obvious optimum pulse asymmetry or/and pulse lengths that leads to the high net energy gain while in snow-plow acceleration it is insensitive to the pulse lengths. Power and linear scaling laws for wakefield and snow-plow acceleration respetively are observed from the net energy gain depending on laser field amplitude. Moreover, there exists also an upper and lower limit on plasma density for an effective acceleration in both of regimes.

Electron acceleration by tightly focused radially polarized few-cycle laser pulses

Within the framework of plane-wave angular spectrum analysis of the electromagnetic field structure, a solution valid for tightly focused radially polarized few-cycle laser pulses propagating in vacuum is presented. The resulting field distribution is significantly different from that based on the paraxial approximation for pulses with either small or large beam diameters. We compare the electron accelerations obtained with the two solutions and find that the energy gain obtained with our new solution is usually much larger than that with the paraxial approximation solution.

The Confirmation of Hypothesis of the Absolute Reference System

The purpose of the research in this article is the examination of the agreement of the hypothesis of the absolute reference system with the results of experiments that have been implemented in the past in order to confirm the special theory of relativity. To achieve this goal, we have chosen for discussing a theoretical topic of electromagnetism, that of electromagnetic mass calculation, and some experiments, some of which concern the transverse Doppler effect in a rotated system, two experiments that concern the kinetic energy measurement of accelerated electrons, one of which is the well known Bertozzis experiment, one experiment that concerns the propagation of Coulomb fields and one more experiment that concerns the effect of annihilation. The basic principles of the hypothesis of the absolute reference system, and the electromagnetic theory derived from these principles, are used to explain the experimental results. In these examples, the hypothesis of the absolute reference system is confirmed, since the experimental results agree with the predictions of this hypothesis. Also, in the discussion of calculation of electromagnetic mass is addressed the difficulty of solving this problem, when someone tries to solve this according to the energy-mass relation of the theory of relativity.

High-Order Temporal Corrected Fields of Ultra-Short Laser Pulses and Laser-Driven Acceleration

Up to third-order temporal correction in terms of a small dimensionless temporal parameter ε=1/（ωoto） （ω0=ck0 the central oscillatory frequency, to the pulse duration of half period）, the field expressions of ultra-short focused laser pulses are explicitly presented. To evaluate the correction efficacy, electric amplitudes of zeroth-order and higher-order corrected fields are compared for different pulse durations. Furthermore, electron interaction with ultra-short laser pulses is simulated using both the zeroth-order and higher-order corrected field equations. Our simulation results show that the third-order correction terms should be considered for investigating the interaction if the laser pulse duration decreases to a few optical periods.

Further Acceleration of MeV Electrons by a Relativistic Laser Pulse

With the development of photocathode rf electron gun, electrons with high-brightness and mono-energy can be obtained easily. By numerically solving the relativistic equations of motion of an electron generated from this facility in laser fields modelled by a circular polarized Gaussian laser pulse, we find the electron can obtain high energy gain from the laser pulse. The corresponding acceleration distance for this electron driven by the ascending part of the laser pulse is much longer than the Rayleigh length, and the light amplitude experienced on the electron is very weak when the laser pulse overtakes the electron. The electron is accelerated effectively and the deceleration can be neglected.For intensities around 1019 W·μm2/cm2,an electron's energy gain near 0.1 GeV can be realized when its initial energy is 4.5 MeV, and the final velocity of the energetic electron is parallel with the propagation axis. The energy gain can be up to 1 GeV if the intensity is about 1021 W·μm2/cm2.The final energy gain of the electron as a function of its initial conditions and the parameters of the laser beam has also been discussed.

Ultrabright γ-ray emission from the interaction of an intense laser pulse with a near-critical-density plasma

An efficient scheme for generating ultrabright γ-rays from the interaction of an intense laser pulse with a near-criticaldensity plasma is studied by using the two-dimensional particle-in-cell simulation including quantum electrodynamic effects.We investigate the effects of target shape on γ-ray generation efficiency using three configurations of the solid foils attached behind the near-critical-density plasma:a flat foil without a channel(target 1),a flat foil with a channel(target 2),and a convex foil with a channel(target 3).When an intense laser propagates in a near-critical-density plasma,a large number of electrons are trapped and accelerated to GeV energy,and emit γ-rays via nonlinear betatron oscillation in the first stage.In the second stage,the accelerated electrons collide with the laser pulse reflected from the foil and emit high-energy,high-density γ-rays via nonlinear Compton scattering.The simulation results show that compared with the other two targets,target 3 affords better focusing of the laser field and electrons,which decreases the divergence angle of g-photons.Consequently,denser and brighter γ-rays are emitted when target 3 is used.Specifically,a dense γ-ray pulse with a peak brightness of 4.6×10^(26) photons/s/mm2/mrad2/0.1%BW(at 100 MeV)and 1.8×1023 photons/s/mm2/mrad2/0.1%BW(at 2 GeV)are obtained at a laser intensity of 8.5×10^(22) W/cm2 when the plasma density is equal to the critical plasma density nc.In addition,for target 3,the effects of plasma channel length,foil curvature radius,laser polarization,and laser intensity on the γ-ray emission are discussed,and optimal values based on a series of simulations are proposed.

Electron Acceleration and Bunch Generation by Intense Femtosecond Laser Pulse in Preplasma of a Target

We present analytical studies of electron acceleration in the low-density preplasma of a thin solid target byan intense femtosecond laser pulse.Electrons in the preplasma are trapped and accelerated by the ponderomotive forceas well as the wake field.Two-dimensional particle-in-cell simulations show that when the laser pulse is stopped by thetarget,electrons trapped in the laser pules can be extracted and move forward inertially.The energetic electron bunchin the bubble is unaffected by the reflected pulse and passes through the target with small energy spread and emittance.There is an optimal preplasma density for the generation of the monoenergetic electron bunch if a laser pulse is given.The maximum electron energy is inverse proportion to the preplasma density.

Electron acceleration during magnetic islands coalescence and division process in a guide field reconnection

The magnetic merging process related to pairwise magnetic islands coalescence is investigated by two-dimensional particle-in-cell simulations with a guide field.Owing to the force of attraction between parallel currents within the initial magnetic islands,the magnetic islands begin to approach each other and merge into one big island.We find that this newly formed island is unstable and can be divided into two small magnetic islands spontaneously.Lastly,these two small islands merge again.We follow the time evolution of this process,in which the contributions of three mechanisms of electron acceleration at different stages,including the Fermi,parallel electric field,and betatron mechanisms,are studied with the guide center theory.

Direct acceleration of electrons using two crossed Laguerre-Gaussian laser beams in vacuum

The basic physical characteristics of electrons accelerated by two linearly polarized and circularly symmetric crossed Laguerre-Gaussian （LG） laser beams with equal frequency and amplitude in vacuum are studied in detail. The condition, under which electrons can be accelerated effectively, and the energy gain are discussed.

Effect of the magnetization parameter on electron acceleration during relativistic magnetic reconnection in ultra-intense laser-produced plasma

Relativistic magnetic reconnection(MR)driven by two ultra-intense lasers with different spot separation distances is simulated by a three-dimensional(3D)kinetic relativistic particle-in-cell(PIC)code.We find that changing the separation distance between two laser spots can lead to different magnetization parameters of the laser plasma environment.As the separation distance becomes larger,the magnetization parameterσbecomes smaller.The electrons are accelerated in these MR processes and their energy spectra can be fitted with double power-law spectra whose index will increase with increasing separation distance.Moreover,the collisionless shocks’contribution to energetic electrons is close to the magnetic reconnection contribution withσdecreasing,which results in a steeper electron energy spectrum.Basing on the3D outflow momentum configuration,the energetic electron spectra are recounted and their spectrum index is close to 1 in these three cases because the magnetization parameterσis very high in the 3D outflow area.

Direct electron acceleration by chirped laser pulse in a cylindrical plasma channel

We study the dynamics of single electron in an inhomogeneous cylindrical plasma channel during the direct acceleration by linearly polarized chirped laser pulse.By adjusting the parameters of the chirped laser pulse and the plasma channel,we obtain the energy gain,trajectory,dephasing rate and unstable threshold of electron oscillation in the channel.The influences of the chirped factor and inhomogeneous plasma density distribution on the electron dynamics are discussed in depth.We find that the nonlinearly chirped laser pulse and the inhomogeneous plasma channel have strong coupled influence on the electron dynamics.The electron energy gain can be enhanced,the instability threshold of the electron oscillation can be lowered,and the acceleration length can be shortened by chirped laser,while the inhomogeneity of the plasma channel can reduce the amplitude of the chirped laser.