PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula...PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula for Pr BSCF is AA'B_(2)O_(5+δ), with Pr(A-site) and Ba/Sr(A'-site) alternately stacked along the c-axis. Due to these structural features, the bulk oxygen ion diffusivity is significantly enhanced through the disorder-free channels in the PrO layer;thus, the A site cations(lanthanide ions) play a pivotal role in determining the overall electrochemical properties of layered perovskites. Consequently, previous research has predominantly focused on the electrical properties and oxygen bulk/surface kinetics of Ln cation effects,whereas the hydration properties for PCFC systems remain unidentified. Here, we thoroughly examined the proton uptake behavior and thermodynamic parameters for the hydration reaction to conclusively determine the changes in the electrochemical performances depending on LnBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(LnBSCF,Ln=Pr, Nd, and Gd) cathodes. At 500 ℃, the quantitative proton concentration of PrBSCF was 2.04 mol% and progressively decreased as the Ln cation size decreased. Similarly, the Gibbs free energy indicated that less energy was required for the formation of protonic defects in the order of Pr BSCF < Nd BSCF < Gd BSCF. To elucidate the close relationship between hydration properties and electrochemical performances in LnBSCF cathodes, PCFC single cell measurements and analysis of the distribution of relaxation time were further investigated.展开更多
The electrochemical mechanism of the reaction between Fe-C melts and CaO-SiO2-Al2O3-FeOx slag systems has been carried out. The experimental results suggest that the final content of carbon in melt increases as the pa...The electrochemical mechanism of the reaction between Fe-C melts and CaO-SiO2-Al2O3-FeOx slag systems has been carried out. The experimental results suggest that the final content of carbon in melt increases as the partial oxygen pressure of gas decreases no matter whether there is electronic conductor or not. However, the final content of carbon in the system with electronic conductor is much lower than that without electronic conductor. It can be deduced that the transfer ability of oxygen in slag is dominated by electrons. When an electronic conductor exists, an easy pathway for the electrons is provided and the oxygen transfer rate is accelerated.展开更多
BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tun...BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tuned by cationic substitution.Our first-principle calculations show that Ag is a promising substitute for the Fe site,resulting in a reduced oxygen vacancy formation energy compared with the pristine BaFeO_(3-δ).Ag has limited solubility in perovskites,and its introduction generates an Ag metal secondary phase,which influences the cathode performances.In this work,we investigate the matter,using a Ba0:9La0:1Fe_(1-x)AgxO_(3-δ)series of materials as a case study.Acknowledging the limited solubility of Ag in Ba0:9La0:1Fe_(1-x)AgxO_(3-δ),we aim to distinguish the effects of Ag substitution from those of the Ag secondary phase.We observed that Ag substitution increases the number of oxygen vacancies,confirming our calculations,and facilitates the oxygen incorporation.However,Ag substitution lowers the number of holes,in this way reducing the electronic p-type conductivity.On the other hand,Ag metal positively affects the electronic conductivity and helps the redistribution of the electronic charge at the cathode-electrolyte interface.展开更多
With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed pro...With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed proton and electron conductor (MPEC) hybrid oxide neuromorphic transistor is proposed by adopting aqueous solution-processed mesoporous silica coating (MSC)-based electrolyte as gate dielec- tric. With optical and electrical synergetic coupling behaviors, the device demonstrates typical synap- tic responses and transition between short-term plasticity and long-term plasticity. With unique field- configurable proton self-modulation behaviors, a pseudo-diode operation mode is demonstrated on the MPEC hybrid transistor. Moreover, the device demonstrates interesting non-associative learning, including habituation and sensitization behavior. The results show that the proposed MPEC hybrid oxide neuromor- phic transistor has great potential in the field of neuromorphic engineering and would have potential in the bionic visual perception platform .展开更多
1 Results Solid oxide fuel cells (SOFC) are ceramic fuel cells that convert chemical into electrical energy in a temperature region between 650 ℃ and 1 000 ℃.Systems are currently under development for a variety of ...1 Results Solid oxide fuel cells (SOFC) are ceramic fuel cells that convert chemical into electrical energy in a temperature region between 650 ℃ and 1 000 ℃.Systems are currently under development for a variety of applications e.g. for both small and large scale stationary combined heat and power systems but also for the supply of electrical energy in the automotive area. The current objectives in the development of SOFCs is to lower the operating temperature from 850 ℃ down to below 750 ℃ in order to ...展开更多
基金supported by the National Research Foundation (NRF) grant funded by the Korea government (NRF2022R1C1C1007619, NRF-2021M3H4A1A01002921, NRF2021M3I3A1084292)supported by the KIST Institutional Program (Project No. 2E32592-23-069)。
文摘PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula for Pr BSCF is AA'B_(2)O_(5+δ), with Pr(A-site) and Ba/Sr(A'-site) alternately stacked along the c-axis. Due to these structural features, the bulk oxygen ion diffusivity is significantly enhanced through the disorder-free channels in the PrO layer;thus, the A site cations(lanthanide ions) play a pivotal role in determining the overall electrochemical properties of layered perovskites. Consequently, previous research has predominantly focused on the electrical properties and oxygen bulk/surface kinetics of Ln cation effects,whereas the hydration properties for PCFC systems remain unidentified. Here, we thoroughly examined the proton uptake behavior and thermodynamic parameters for the hydration reaction to conclusively determine the changes in the electrochemical performances depending on LnBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(LnBSCF,Ln=Pr, Nd, and Gd) cathodes. At 500 ℃, the quantitative proton concentration of PrBSCF was 2.04 mol% and progressively decreased as the Ln cation size decreased. Similarly, the Gibbs free energy indicated that less energy was required for the formation of protonic defects in the order of Pr BSCF < Nd BSCF < Gd BSCF. To elucidate the close relationship between hydration properties and electrochemical performances in LnBSCF cathodes, PCFC single cell measurements and analysis of the distribution of relaxation time were further investigated.
文摘The electrochemical mechanism of the reaction between Fe-C melts and CaO-SiO2-Al2O3-FeOx slag systems has been carried out. The experimental results suggest that the final content of carbon in melt increases as the partial oxygen pressure of gas decreases no matter whether there is electronic conductor or not. However, the final content of carbon in the system with electronic conductor is much lower than that without electronic conductor. It can be deduced that the transfer ability of oxygen in slag is dominated by electrons. When an electronic conductor exists, an easy pathway for the electrons is provided and the oxygen transfer rate is accelerated.
基金The authors gratefully acknowledge the Research Grant Council of Hong Kong for support through the projects 16201820,and 16206019.
文摘BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tuned by cationic substitution.Our first-principle calculations show that Ag is a promising substitute for the Fe site,resulting in a reduced oxygen vacancy formation energy compared with the pristine BaFeO_(3-δ).Ag has limited solubility in perovskites,and its introduction generates an Ag metal secondary phase,which influences the cathode performances.In this work,we investigate the matter,using a Ba0:9La0:1Fe_(1-x)AgxO_(3-δ)series of materials as a case study.Acknowledging the limited solubility of Ag in Ba0:9La0:1Fe_(1-x)AgxO_(3-δ),we aim to distinguish the effects of Ag substitution from those of the Ag secondary phase.We observed that Ag substitution increases the number of oxygen vacancies,confirming our calculations,and facilitates the oxygen incorporation.However,Ag substitution lowers the number of holes,in this way reducing the electronic p-type conductivity.On the other hand,Ag metal positively affects the electronic conductivity and helps the redistribution of the electronic charge at the cathode-electrolyte interface.
基金the National Natural Science Foun-dation of China(Nos.51972316,U22A2075)the Ningbo Key Scientific and Technological Project(No.2021Z116).
文摘With inherent ionic priorities, mixed ion and electron conductor hybrid devices have been proposed for brain-inspired neuromorphic system applications, demonstrating interesting neuromorphic functions. Here, mixed proton and electron conductor (MPEC) hybrid oxide neuromorphic transistor is proposed by adopting aqueous solution-processed mesoporous silica coating (MSC)-based electrolyte as gate dielec- tric. With optical and electrical synergetic coupling behaviors, the device demonstrates typical synap- tic responses and transition between short-term plasticity and long-term plasticity. With unique field- configurable proton self-modulation behaviors, a pseudo-diode operation mode is demonstrated on the MPEC hybrid transistor. Moreover, the device demonstrates interesting non-associative learning, including habituation and sensitization behavior. The results show that the proposed MPEC hybrid oxide neuromor- phic transistor has great potential in the field of neuromorphic engineering and would have potential in the bionic visual perception platform .
文摘1 Results Solid oxide fuel cells (SOFC) are ceramic fuel cells that convert chemical into electrical energy in a temperature region between 650 ℃ and 1 000 ℃.Systems are currently under development for a variety of applications e.g. for both small and large scale stationary combined heat and power systems but also for the supply of electrical energy in the automotive area. The current objectives in the development of SOFCs is to lower the operating temperature from 850 ℃ down to below 750 ℃ in order to ...