According to the great demand for the＂ green＂ plastics processing technology of the low energy consumption, high efficiency and environmental protection in plastics industry, the plastics processing method and techn...According to the great demand for the＂ green＂ plastics processing technology of the low energy consumption, high efficiency and environmental protection in plastics industry, the plastics processing method and technology based on the elongation rheology, with continuing evolution and innovation of the plastics plasticating and conveying method, are presented and researched on the basis of the plastics dynamic processing method arid equipment, and the plastics plasticating and conveying process in the vane extrusion system, the technical characteristics and the applications of vane plasticating and conveying technology are discussed. The research results show that compared with the conventional processing equipment, this new technology and equipment shows many outstanding advantages, such as shortening the thermo-meehanical history of the plastics processing by more than 50 % , reducing the energy consumption by 30 % or so, improving the mixing and blending effects, improving the quality of the products and the adaptability to materials, etc. , and it is found that the new technology and equipment has special superiority in the fields of the processing for material systems, such as the multiphase and multicomponent composite materials, the shear heat sensitive macromolecular materials, etc.展开更多
A combined process of hot-deformation plus two-step quenching and partitioning （HDQP） treatment was applied to a low carbon 20Si2CrNi3MoV steel, and transmission electron microscopy （TEM）, scanning electron micros...A combined process of hot-deformation plus two-step quenching and partitioning （HDQP） treatment was applied to a low carbon 20Si2CrNi3MoV steel, and transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Vickers hardness and tension test were used to characterize the microstructure and mechanical properties. More stable retained austen ite due to fine microstructures and typical curved micromorphology is obtained, and the newly-treated steel obtains more retained austenite because of the effect of hot deformation. The retained austenite fraction increases and then decreases with the increasing quenching temperature from 200 to 350 ℃. The maximum retained austenite fraction （18.3 % ） and elongation （15 % ） are obtained to enhance the ductility.展开更多
基金The National Nature Science Foundation of China (No.10872071 No.50973035+1 种基金 No.50903033)The National Technology R&D Program of China(No.2009BA184B06)
文摘According to the great demand for the＂ green＂ plastics processing technology of the low energy consumption, high efficiency and environmental protection in plastics industry, the plastics processing method and technology based on the elongation rheology, with continuing evolution and innovation of the plastics plasticating and conveying method, are presented and researched on the basis of the plastics dynamic processing method arid equipment, and the plastics plasticating and conveying process in the vane extrusion system, the technical characteristics and the applications of vane plasticating and conveying technology are discussed. The research results show that compared with the conventional processing equipment, this new technology and equipment shows many outstanding advantages, such as shortening the thermo-meehanical history of the plastics processing by more than 50 % , reducing the energy consumption by 30 % or so, improving the mixing and blending effects, improving the quality of the products and the adaptability to materials, etc. , and it is found that the new technology and equipment has special superiority in the fields of the processing for material systems, such as the multiphase and multicomponent composite materials, the shear heat sensitive macromolecular materials, etc.
基金supported by the National Key Research and Development Plan(Nos.2017YFB0304401 and 2016YFB0101605)the Major State Basic Research Development Program of China(973Program)(No.2010CB630803)
文摘A combined process of hot-deformation plus two-step quenching and partitioning （HDQP） treatment was applied to a low carbon 20Si2CrNi3MoV steel, and transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Vickers hardness and tension test were used to characterize the microstructure and mechanical properties. More stable retained austen ite due to fine microstructures and typical curved micromorphology is obtained, and the newly-treated steel obtains more retained austenite because of the effect of hot deformation. The retained austenite fraction increases and then decreases with the increasing quenching temperature from 200 to 350 ℃. The maximum retained austenite fraction （18.3 % ） and elongation （15 % ） are obtained to enhance the ductility.
