CO_(2)flooding in shale oil reservoir with radial borehole fracturing for CO_(2)storage and enhanced oil recovery

This study introduces a novel method integrating CO_(2)flooding with radial borehole fracturing for enhanced oil recovery and CO_(2)underground storage,a solution to the limited vertical stimulation reservoir volume in horizontal well fracturing.A numerical model is established to investigate the production rate,reservoir pressure field,and CO_(2)saturation distribution corresponding to changing time of CO_(2)flooding with radial borehole fracturing.A sensitivity analysis on the influence of CO_(2)injection location,layer spacing,pressure difference,borehole number,and hydraulic fractures on oil production and CO_(2)storage is conducted.The CO_(2)flooding process is divided into four stages.Reductions in layer spacing will significantly improve oil production rate and gas storage capacity.However,serious gas channeling can occur when the spacing is lower than 20 m.Increasing the pressure difference between the producer and injector,the borehole number,the hydraulic fracture height,and the fracture width can also increase the oil production rate and gas storage rate.Sensitivity analysis shows that layer spacing and fracture height greatly influence gas storage and oil production.Research outcomes are expected to provide a theoretical basis for the efficient development of shale oil reservoirs in the vertical direction.

High-Precision Flow Numerical Simulation and Productivity Evaluation of Shale Oil Considering Stress Sensitivity

Continental shale oil reservoirs,characterized by numerous bedding planes and micro-nano scale pores,feature significantly higher stress sensitivity compared to other types of reservoirs.However,research on suitable stress sensitivity characterization models is still limited.In this study,three commonly used stress sensitivity models for shale oil reservoirs were considered,and experiments on representative core samples were conducted.By fitting and comparing the data,the“exponential model”was identified as a characterization model that accurately represents stress sensitivity in continental shale oil reservoirs.To validate the accuracy of the model,a two-phase seepage mathematical model for shale oil reservoirs coupled with the exponential model was introduced.The model was discretely solved using the finite volume method,and its accuracy was verified through the commercial simulator CMG.The study evaluated the productivity of a typical horizontal well under different engineering,geological,and fracture conditions.The results indicate that considering stress sensitivity leads to a 13.57%reduction in production for the same matrix permeability.Additionally,as the fracture half-length and the number of fractures increase,and the bottomhole flowing pressure decreases,the reservoir stress sensitivity becomes higher.

四川广电构建运维资料快速查询助手的探索

本文介绍了中国广电四川网络股份有限公司对运维资料快速查询助手的研发探索。同时,为进一步优化模型性能,本文结合大模型的微调方法,提出生成新的模型Qwen-lizehua:14B,其在运维资料快速查询助手中的应用极大地提升了问题解答的准确性和响应速度,从而为运维团队提供了强大且高效的技术支持。

Small-signal modeling of GaN HEMT switch with a new intrinsic elements extraction method

A novel and accurate method is proposed to extract the intrinsic elements of the GaN high-electron-mobility transistor（HEMT） switch.The new extraction method is verified by comparing the simulated S-parameters with the measured data over the 5-40 GHz frequency range.The percentage errors E（ij） within 3.83% show the great agreement between the simulated S-parameters and the measured data.

Well interference evaluation considering complex fracture networks through pressure and rate transient analysis in unconventional reservoirs

Severe well interference through complex fracture networks(CFNs)can be observed among multi-well pads in low permeability reservoirs.The well interference analysis between multi-fractured horizontal wells(MFHWs)is vitally important for reservoir effective development.Well interference has been historically investigated by pressure transient analysis,while it has shown that rate transient analysis has great potential in well interference diagnosis.However,the impact of complex fracture networks(CFNs)on rate transient behavior of parent well and child well in unconventional reservoirs is still not clear.To further investigate,this paper develops an integrated approach combining pressure and rate transient analysis for well interference diagnosis considering CFNs.To perform multi-well simulation considering CFNs,non-intrusive embedded discrete fracture model approach was applied for coupling fracture with reservoir models.The impact of CFN including natural fractures and frac-hits on pressure and rate transient behavior in multi-well system was investigated.On a logelog plot,interference flow and compound linear flow are two new flow regimes caused by nearby producers.When both NFs and frac-hits are present in the reservoir,frac-hits have a greater impact on well#1 which contains frac-hits,and NFs have greater impact on well#3 which does not have frac-hits.For all well producing circumstances,it might be challenging to see divergence during pseudosteady state flow brought on by frac-hits on the logelog plot.Besides,when NFs occur,reservoir depletion becomes noticeable in comparison to frac-hits in pressure distribution.Application of this integrated approach demonstrates that it works well to characterize the well interference among different multi-fractured horizontal wells in a well pad.Better reservoir evaluation can be acquired based on the new features observed in the novel model,demonstrating the practicability of the proposed approach.The findings of this study can help for better evaluating well interference degree in multi-well systems combing PTA and RTA,which can reduce the uncertainty and improve the accuracy of the well interference analysis based on both field pressure and rate data.

A Multi-Level Circulant Cross-Modal Transformer for Multimodal Speech Emotion Recognition

Speech emotion recognition,as an important component of humancomputer interaction technology,has received increasing attention.Recent studies have treated emotion recognition of speech signals as a multimodal task,due to its inclusion of the semantic features of two different modalities,i.e.,audio and text.However,existing methods often fail in effectively represent features and capture correlations.This paper presents a multi-level circulant cross-modal Transformer(MLCCT)formultimodal speech emotion recognition.The proposed model can be divided into three steps,feature extraction,interaction and fusion.Self-supervised embedding models are introduced for feature extraction,which give a more powerful representation of the original data than those using spectrograms or audio features such as Mel-frequency cepstral coefficients(MFCCs)and low-level descriptors(LLDs).In particular,MLCCT contains two types of feature interaction processes,where a bidirectional Long Short-term Memory(Bi-LSTM)with circulant interaction mechanism is proposed for low-level features,while a two-stream residual cross-modal Transformer block is appliedwhen high-level features are involved.Finally,we choose self-attention blocks for fusion and a fully connected layer to make predictions.To evaluate the performance of our proposed model,comprehensive experiments are conducted on three widely used benchmark datasets including IEMOCAP,MELD and CMU-MOSEI.The competitive results verify the effectiveness of our approach.

Analysis of fracture propagation and shale gas production by intensive volume fracturing

This paper presents an integrated study from fracture propagation modeling to gas flow modeling and a correlation analysis to explore the key controlling factors of intensive volume fracturing.The fracture propagation model takes into account the interaction between hydraulic fracture and natural fracture by means of the displacement discontinuity method(DDM)and the Picard iterative method.The shale gas flow considers multiple transport mechanisms,and the flow in the fracture network is handled by the embedded discrete fracture model(EDFM).A series of numerical simulations are conducted to analyze the effects of the cluster number,stage spacing,stress difference coefficient,and natural fracture distribution on the stimulated fracture area,fractal dimension,and cumulative gas production,and their correlation coefficients are obtained.The results show that the most influential factors to the stimulated fracture area are the stress difference ratio,stage spacing,and natural fracture density,while those to the cumulative gas production are the stress difference ratio,natural fracture density,and cluster number.This indicates that the stress condition dominates the gas production,and employing intensive volume fracturing(by properly increasing the cluster number)is beneficial for improving the final cumulative gas production.

Optimization of operational strategies for rich gas enhanced oil recovery based on a pilot test in the Bakken tight oil reservoir

Horizontal well drilling and multistage hydraulic fracturing have been demonstrated as effective approaches for stimulating oil production in the Bakken tight oil reservoir.However,after multiple years of production,primary oil recovery in the Bakken is generally less than 10%of the estimated original oil in place.Gas huff‘n’puff(HnP)has been tested in the Bakken Formation as an enhanced oil recovery(EOR)method;however,most field pilot test results showed no significant incremental oil production.One of the factors affecting HnP EOR performance is premature gas breakthrough,which is one of the most critical issues observed in the field because of the presence of interwell fractures.Consequently,injected gas rapidly reaches adjacent production wells without contacting reservoir rock and increasing oil recovery.Proper conformance control is therefore needed to avoid early gas breakthrough and improve EOR performance.In this study,a rich gas EOR pilot in the Bakken was carefully analyzed to collect the essential reservoir and operational data.A simulation model with 16 wells was then developed to reproduce the production history and predict the EOR performance with and without conformance control.EOR operational strategies,including single-and multiple-well HnP,with different gas injection constraints were investigated.The simulation results of single-well HnP without conformance control showed that a rich gas injection rate of at least 10 MMscfd was needed to yield meaningful incremental oil production.The strategy of conformance control via water injection could significantly improve oil production in the HnP well,but injecting an excessive amount of water also leads to water breakthrough and loss of oil production in the offset wells.By analyzing the production performance of the wells individually,the arrangement of wells was optimized for multiple-well HnP EOR.The multiwell results showed that rich gas EOR could improve oil production up to 7.4%by employing conformance control strategies.Furthermore,replacing rich gas with propane as the injection gas could result in 14%of incremental oil production.

Horizontal Well Interference Performance and Water Injection Huff and Puff Effect on Well Groups with Complex Fracture Networks:A Numerical Study

Well interference has become a common phenomenon with the increasing scale of horizontal well fracturing.Recent studies on well interference in horizontal wells do not properly reflect the physical model of the postfracturing well groups and the realistic fracturing process of infill wells.Establishing the correspondence between well interference causative factors and manifestations is of great significance for infill well deployment and secondary oil recovery.In this work,we develop a numerical model that considers low velocity non-Darcy seepage inshale reservoirs to study the inter-well interferencephenomenon that occurs in theSantanghufield,andconstruct an explicit hydraulic fracture and complex natural fracture network model with an embedded discrete fracture model,focusing on the effect of fracture network morphology on well interactions.The model also considers a multi-segment wellbore model to accommodate the effect of inter-well crossflow on wellbore tubular flow.The changes in formation pressure and water saturation during fracturing are performed by controlling the injection pressure and water injection rate.The result shows that the shape of the fracture network generated by the infill well with the old well determines the subsequent fluid and oil-increasing performance of the disturbed well.The synergistic production or competitive relationship formed by fractures with different connectivity between the two wells determines the positive and negative effects of the interference.The paper also investigates the adaptation study of water injection huff and puff schemes for well groups with different connectivity,and demonstrated a potential yield increase of up to 10.85%under adaptation injection.This method of identifying well interference based on the production dynamics of affected wells and the subsequent corresponding water injection method provides valuable references for the selection of secondary oil recovery measures.

A p-version embedded model for simulation of concrete temperature fields with cooling pipes

Pipe cooling is an effective method of mass concrete temperature control, but its accurate and convenient numerical simulation is still a cumbersome problem. An improved embedded model, considering the water temperature variation along the pipe, was proposed for simulating the temperature field of early-age concrete structures containing cooling pipes. The improved model was verified with an engineering example. Then, the p-version self-adaption algorithm for the improved embedded model was deduced, and the initial values and boundary conditions were examined. Comparison of some numerical samples shows that the proposed model can provide satisfying precision and a higher efficiency. The analysis efficiency can be doubled at the same precision, even for a large-scale element. The p-version algorithm can fit grids of different sizes for the temperature field simulation. The convenience of the proposed algorithm lies in the possibility of locating more pipe segments in one element without the need of so regular a shape as in the explicit model.

New advances in coal structure model

Although human beings have come to understand and utilize coal for a very long history, no theoretical breakthrough in the study of coal structure has been made, which still needs continuous efforts of coal chemical workers. Based on the viewpoint of ‘vague/clear', the species classification and accurate analysis on coal were conducted by using the natural clustering all-component separation method. A more systematic and detailed coal embedded structure model theory which is suitable for coal of all ranks was developed from the previous one and a more complete theoretical system about the component and structure of coal was constructed. The whole establishment process of the theory was summarized and some of the main support data and analysis test results, including TEM, AFM, FTIR, GC/MS, MALDI/TOF/MS, DART/MSD, fractal analysis and so on were provided. The coal embedded structure theory fully considers both the identity and the particularity of all-rank coal, reflects the coal component and structure in the full range of coal rank, solves the systematic cognitive problem of coal component and structure on macro and micro level, and provides a valuable and meaningful theoretical approach for the coal processing and conversion technology.

Ensemble-based optimization of hydraulically fractured horizontal well placement in shale gas reservoir through Hough transform parameterization

Shale gas reservoirs have been successfully developed due to the advancement of the horizontal well drilling and multistage hydraulic fracturing techniques.However,the optimization design of the horizontal well drilling,hydraulic fracturing,and operational schedule is a challenging problem.An ensemble-based optimization method(EnOpt)is proposed here to optimize the design of the hydraulically fractured horizontal well in the shale gas reservoir.The objective is to maximize the net present value(NPV)which requires a simulation model to predict the cumulative shale gas production.To accurately describe the geometry of the hydraulic fractures,the embedded discrete fracture modeling method(EDFM)is used to construct the shale gas simulation model.The efects of gas absorption,Knudsen difusion,natural and hydraulic fractures,and gas-water two phase fow are considered in the shale gas production system.To improve the parameter continuity and Gaussianity required by the EnOpt method,the Hough transformation parameterization is used to characterize the horizontal well.The results show that the proposed method can efectively optimize the design parameters of the hydraulically fractured horizontal well,and the NPV can be improved greatly after optimization so that the design parameters can approach to their optimal values.

Molecular Dynamics Simulation of Liquid Noble Metals Au and Ag

1.IntroductionRecently Daw and Baskes[1,2]proposed the embedded atom model(EAM)on the basisof quasi-atom concept[3]and density-function theory.It is applicable to the transition met-als as well as the simple metals.It has been widely used in point defect[4],surface[5]andthermal expansion[6].Foiles[7]made the application of the EAM to liquid transition metalsand showed that the EAM also provided a realistic description of the energetics and structure

Study on a Dual Embedded Discrete Fracture Model for Fluid Flow in Fractured Porous Media

Simulation of fluid flow in the fractured porous media is very important and challenging.Researchers have developed some models for fractured porous media.With the development of related research in recent years,the prospect of embedded discrete fracture model(EDFM)is more and more bright.However,since the size of the fractures in the actual reservoir varies greatly,a very fine grid should be used which leads to a huge burden to the computing resources.To address this challenge,in the present paper,an upscaling based model is proposed.In this model,the flow in large-scale fractures is directly described by the EDFM while that in the small-scale fractures is upscaled through local simulation by EDFM.The EDFM is used to simulate the large-and small-scale fractures independently two times,so the new model is called dual embedded discrete fracture model(D-EDFM).In this paper,the detailed implementation process of D-EDFM is introduced and,through test cases,it is found the proposed model is a feasible method to simulate the flow in fractured porous media.

Research on knowledge reasoning of TCM based on knowledge graphs

With the widespread use of Internet,the amount of data in the field of traditional Chinese medicine(TCM)is growing exponentially.Consequently,there is much attention on the collection of useful knowledge as well as its effective organization and expression.Knowledge graphs have thus emerged,and knowledge reasoning based on this tool has become one of the hot spots of research.This paper first presents a brief introduction to the development of knowledge graphs and knowledge reasoning,and explores the significance of knowledge reasoning.Secondly,the mainstream knowledge reasoning methods,including knowledge reasoning based on traditional rules,knowledge reasoning based on distributed feature representation,and knowledge reasoning based on neural networks are introduced.Then,using stroke as an example,the knowledge reasoning methods are expounded,the principles and characteristics of commonly used knowledge reasoning methods are summarized,and the research and applications of knowledge reasoning techniques in TCM in recent years are sorted out.Finally,we summarize the problems faced in the development of knowledge reasoning in TCM,and put forward the importance of constructing a knowledge reasoning model suitable for the field of TCM.

A smart productivity evaluation method for shale gas wells based on 3D fractal fracture network model

The generation method of three-dimensional fractal discrete fracture network(FDFN)based on multiplicative cascade process was developed.The complex multi-scale fracture system in shale after fracturing was characterized by coupling the artificial fracture model and the natural fracture model.Based on an assisted history matching(AHM)using multiple-proxy-based Markov chain Monte Carlo algorithm(MCMC),an embedded discrete fracture modeling(EDFM)incorporated with reservoir simulator was used to predict productivity of shale gas well.When using the natural fracture generation method,the distribution of natural fracture network can be controlled by fractal parameters,and the natural fracture network generated coupling with artificial fractures can characterize the complex system of different-scale fractures in shale after fracturing.The EDFM,with fewer grids and less computation time consumption,can characterize the attributes of natural fractures and artificial fractures flexibly,and simulate the details of mass transfer between matrix cells and fractures while reducing computation significantly.The combination of AMH and EDFM can lower the uncertainty of reservoir and fracture parameters,and realize effective inversion of key reservoir and fracture parameters and the productivity forecast of shale gas wells.Application demonstrates the results from the proposed productivity prediction model integrating FDFN,EDFM and AHM have high credibility.

EFFECTIVE ELASTIC MODULI OF INHOMOGENEOUS SOLIDS BY EMBEDDED CELL MODEL

An embedded cell model is presented to obtain the effective elastic moduli for three-dimensional two-phase composites which is an exact analytic formula without any simplified approximation and can be expressed in an explicit form. For the different cells such as spherical inclusions and cracks surrounded by sphere and oblate ellipsoidal matrix, the effective elastic moduli are evaluated and the results are compared with those from various micromechanics models. These results show that the present model is direct, simple and efficient to deal with three-dimensional two-phase composites.

Narrowband PLC Channel Workbench to Emulate Transmission in Smart Grid

A real-time workbench able to reproduce the same behavior as an indoor network is in order. Such a tool will help researchers and industrials extend the smart grid technology indoors and have a better acknowledgment of Smart Grid systems interoperability. In order to develop such a tool many approaches should be studied to choose the most suitable one by comparing the models and the technologies. The considered hardware are the embedded systems and the selected approach is the statistical one. It appears that the FlR filter is the most pertinent approach.

SPC cluster modeling of metal oxides: ways of determining the values of point charges in the embedded cluster model

Several criteria for determining self consistently the magnitude of point charges employed in the embedded cluster modeling of metal oxides have been proposed and investigated. Merits and demerits of these criteria have been compared. Ab initio study has been performed to show the influence of the values of point charges chosen on the calculated electronic properties of the embedded MgO cluster. The calculation results demonstrate that the electronic properties of the embedded cluster are of great dependence on the magnitude of the embedding point charges; that the employment of the nominal charges, ±2.0, would cause overestimation of the crystal potential even in the case of the so called purely ionic oxide, MgO; and that certain requirements for the consistence between the embedded cluster and the embedding point charges should be reached. It is further found that errors for the calculated properties of the embedded cluster still exist with respect to those of bulk solid even in the case that self consistence in terms of charge, dipole moment, or electrostatic potential was met between the cut out cluster and the embedding point charges. As far as spherical expansion is performed upon the embedding point charges, which furnishes the embedding point charges with a continuous distribution of charge density, a global agreement is reached between the calculated properties of the embedded cluster model and those of the bulk solid.

Effect of hydraulic fracture deformation hysteresis on CO_(2)huff-n-puff performance in shale gas reservoirs

As a promising enhanced gas recovery technique,CO_(2)huff-n-puff has attracted great attention recently.However,hydraulic fracture deformation hysteresis is rarely considered,and its effect on CO_(2)huff-n-puff performance is not well understood.In this study,we present a fully coupled multi-component flow and geomechanics model for simulating CO_(2)huff-n-puff in shale gas reservoirs considering hydraulic fracture deformation hysteresis.Specifically,a shale gas reservoir after hydraulic fracturing is modeled using an efficient hybrid model incorporating an embedded discrete fracture model(EDFM),multiple porosity model,and single porosity model.In flow equations,Fick’s law,extended Langmuir isotherms,and the Peng-Robinson equation of state are used to describe the molecular diffusion,multi-component adsorption,and gas properties,respectively.In relation to geomechanics,a path-dependent constitutive law is applied for the hydraulic fracture deformation hysteresis.The finite volume method(FVM)and the stabilized extended finite element method(XFEM)are applied to discretize the flow and geomechanics equations,respectively.We then solve the coupled model using the fixed-stress split iterative method.Finally,we verify the presented method using several numerical examples,and apply it to investigate the effect of hydraulic fracture deformation hysteresis on CO_(2)huff-n-puff performance in a 3D shale gas reservoir.Numerical results show that hydraulic fracture deformation hysteresis has some negative effects on CO_(2)huff-n-puff performance.The effects are sensitive to the initial conductivity of hydraulic fracture,production pressure,starting time of huff-n-puff,injection pressure,and huff-n-puff cycle number.