Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four ...Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four kinds of natural fibers and two kinds of inorganic materials tested, natural fiber A, originated from wood shavings was found to give the best performance of demulsification. The demulsification efficiency can exceed 96.5% when demulsification conditions are optimized. The packed-column showed much better performance both in terms of demulsification efficiency and repeated use of the recovered oil phase for extracting cadmium in simulated wastewater. Operating variables governing the demulsification efficiency were investigated.展开更多
We report a wet curing system developed and made suitable for practical application to curing the interior and verticalconcrete surfaces of tunnel linings after the formwork has been removed. In this system, air is ev...We report a wet curing system developed and made suitable for practical application to curing the interior and verticalconcrete surfaces of tunnel linings after the formwork has been removed. In this system, air is evacuated from the gap between the curing sheet and the concrete surface to create a close contact, and by supplying water to the space between the contacting surfaces, a water film is formed over the concrete surface. This enables the wet curing of vertical concrete surfaces and interior surfaces of tunnel linings after the formwork has been removed, a process that has to date been difficult. In this paper, the effects of wet curing on improving the durability of concrete are verified, and examples of the application of wet curing to actual structures are presented.展开更多
The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chl...The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chloride migration were experimentally investigated and the results were evaluated by compasison with those under fresh water curing(FW). Water absorption and porosity were also evaluated only under WD cycles. The results showed the important influence of wetting and drying cycles on the properties of SAP modified HPC properties. Carefully designed, SAP minimized the long-term compressive strength of HPC under marine WD cycles. The hydration rate was faster in the initial curing, but became lower as compared with that cured in FW. In addition, SAP improved the long-term water absorption resistance and chloride migration resistance of HPC under marine WD cycles. The examination of the porosity showed a lower increase of the volume of capillary pores in SAP modified HPC under long term WD cycles compared with that without SAP. Therefore, internal curing by SAP could improve the durability properties of HPC under marine WD cycles.展开更多
The influence of lightweight aggregate （LWA） pre-wetting on the chemical bound water and pore structure of the paste around aggregate as well as concrete permeability were investi-gated. The results show that, in ea...The influence of lightweight aggregate （LWA） pre-wetting on the chemical bound water and pore structure of the paste around aggregate as well as concrete permeability were investi-gated. The results show that, in early age the dry LWA has significant effect on the formation of dense paste around it and improving the concrete impermeability. However the prewetted LWA has strong water-releasing effect in later age, which increases the hydration degree of the paste around it, and makes the adjacent paste develop a structure with low porosity and finer aperture, furthermore the concrete impermeability can be improved. It is suggested that, as for concrete with low durability requirement, the LWA without pre-wetting treatment can be used as long as meet the workability re-quirement of fresh concrete, the good impermeability of concrete can be gained as well. As for con-crete with high durability requirement, the prewetted LWA should be used, and the pre-wetting time should be extended as long as possible, in order to optimize the concrete structure in long term, and improve the concrete durability.展开更多
In order to improve the curing quality and industrial availability of upper tobacco leaves,the effects of different temperature differences between dry and wet bulbs in yellowing stage on the chemical composition,arom...In order to improve the curing quality and industrial availability of upper tobacco leaves,the effects of different temperature differences between dry and wet bulbs in yellowing stage on the chemical composition,aroma substances and economic characters of upper tobacco leaves were investigated using field test and indoor test. The results showed that when the dry bulb temperature was 38℃ and the temperature difference between dry and wet bulbs was 1. 5℃,the coordination of chemical constituents and the content of aroma substances in the upper tobacco leaves were increased,the appearance quality and sensory evaluation quality were significantly improved,and the economic characters after curing were improved,thereby improving the yield and quality of the upper tobacco leaves.展开更多
文摘Demulsification of emulsified water-in-oil droplets was worked out with the employment of wetting coalescence materials. Demulsification is carried out in conventional stirred-column and packed-column. Among the four kinds of natural fibers and two kinds of inorganic materials tested, natural fiber A, originated from wood shavings was found to give the best performance of demulsification. The demulsification efficiency can exceed 96.5% when demulsification conditions are optimized. The packed-column showed much better performance both in terms of demulsification efficiency and repeated use of the recovered oil phase for extracting cadmium in simulated wastewater. Operating variables governing the demulsification efficiency were investigated.
文摘We report a wet curing system developed and made suitable for practical application to curing the interior and verticalconcrete surfaces of tunnel linings after the formwork has been removed. In this system, air is evacuated from the gap between the curing sheet and the concrete surface to create a close contact, and by supplying water to the space between the contacting surfaces, a water film is formed over the concrete surface. This enables the wet curing of vertical concrete surfaces and interior surfaces of tunnel linings after the formwork has been removed, a process that has to date been difficult. In this paper, the effects of wet curing on improving the durability of concrete are verified, and examples of the application of wet curing to actual structures are presented.
基金Funded by National Key Research and Development Program of China(No.2017YFB0310000)Opening Project of State Key Laboratory of Green Building Materials(No.YA-584)the Key Technology Innovation Program from the Ministry of Science and Technology(Hubei Province)(No.2018AAA004)
文摘The internal curing effect of superabsorbent polymer(SAP) on the properties of high performance concrete(HPC) under marine wetting and drying cycles(WD cycles) was investigated. Compressive strength, hydration and chloride migration were experimentally investigated and the results were evaluated by compasison with those under fresh water curing(FW). Water absorption and porosity were also evaluated only under WD cycles. The results showed the important influence of wetting and drying cycles on the properties of SAP modified HPC properties. Carefully designed, SAP minimized the long-term compressive strength of HPC under marine WD cycles. The hydration rate was faster in the initial curing, but became lower as compared with that cured in FW. In addition, SAP improved the long-term water absorption resistance and chloride migration resistance of HPC under marine WD cycles. The examination of the porosity showed a lower increase of the volume of capillary pores in SAP modified HPC under long term WD cycles compared with that without SAP. Therefore, internal curing by SAP could improve the durability properties of HPC under marine WD cycles.
基金Funded by the Western Transportation Construction of Communication Ministry (No. 200331882008)
文摘The influence of lightweight aggregate （LWA） pre-wetting on the chemical bound water and pore structure of the paste around aggregate as well as concrete permeability were investi-gated. The results show that, in early age the dry LWA has significant effect on the formation of dense paste around it and improving the concrete impermeability. However the prewetted LWA has strong water-releasing effect in later age, which increases the hydration degree of the paste around it, and makes the adjacent paste develop a structure with low porosity and finer aperture, furthermore the concrete impermeability can be improved. It is suggested that, as for concrete with low durability requirement, the LWA without pre-wetting treatment can be used as long as meet the workability re-quirement of fresh concrete, the good impermeability of concrete can be gained as well. As for con-crete with high durability requirement, the prewetted LWA should be used, and the pre-wetting time should be extended as long as possible, in order to optimize the concrete structure in long term, and improve the concrete durability.
文摘In order to improve the curing quality and industrial availability of upper tobacco leaves,the effects of different temperature differences between dry and wet bulbs in yellowing stage on the chemical composition,aroma substances and economic characters of upper tobacco leaves were investigated using field test and indoor test. The results showed that when the dry bulb temperature was 38℃ and the temperature difference between dry and wet bulbs was 1. 5℃,the coordination of chemical constituents and the content of aroma substances in the upper tobacco leaves were increased,the appearance quality and sensory evaluation quality were significantly improved,and the economic characters after curing were improved,thereby improving the yield and quality of the upper tobacco leaves.
