Emulsive properties of nanometer TiO_2 ultrafine powder in oil-water system

INVESTIGAORS recognized the role of finely divided insoluble solid particles in stabilizing oil-water emulsions in the 1920s. The work has been extensively done since the 1980s. Butthe studies only focused on particles with the parameter up to micrometer size rather than thoseof nanometer size. In this letter, emulsive properties, including the type, ability and mecha-

Effect of sodium starch octenyl succinate-based Pickering emulsion on the physicochemical properties of hairtail myofibrillar protein gel subjected to multiple freeze-thaw cycles

A Pickering emulsion based on sodium starch octenyl succinate(SSOS)was prepared and its effects on the physicochemical properties of hairtail myofibrillar protein gels(MPGs)subjected to multiple freeze-thaw(F-T)cycles were investigated.The whiteness,water-holding capacity,storage modulus(G')and texture properties of the MPGs were significantly improved by adding 1%-2%Pickering emulsion(P<0.05).Meanwhile,Raman spectral analysis demonstrated that Pickering emulsion promoted the transformation of secondary structure,enhanced hydrogen bonds and hydrophobic interactions,and promoted the transition of disulfide bond conformation from g-g-g to g-g-t and t-g-t.At an emulsion concentration of 2%,theα-helix content decreased by 10.37%,while theβ-sheet content increased by 7.94%,compared to the control.After F-T cycles,the structure of the MPGs was destroyed,with an increase in hardness and a decrease in whiteness and water-holding capacity,however,the quality degradation of MPGs was reduced with 1%-2%Pickering emulsion.These findings demonstrated that SSOS-Pickering emulsions,as potential fat substitutes,can enhance the gel properties and the F-T stability of MPGs.

Oil-in-water nanoemulsions loaded with lycopene extracts encapsulated by spray drying:Formulation,characterization and optimization

Lycopene is very susceptible to degradation once released from the protective chromoplast environment.In this study,oil-in-water(O/W)nanoemulsions coupled with spray drying technology were applied for the encapsulation and stabilization of lycopene extracted from tomato waste.Tomato extract was obtained by ultrasound-assisted extraction.Nanoemulsions were prepared by a high-speed rotor stator using isopropyl myristate as the oil phase and Pluronic F-127 as the emulsifier for the aqueous external phase.The effect of emulsification process parameters was investigated.Spray drying of the produced emulsions was attempted to obtain a stabilized dry powder after the addition of a coating agent.The effect of different coating agents(maltodextrin,inulin,gum arabic,pectin,whey and polyvinylpyrrolidone),drying temperature(120-170℃),and feed flow rate(3-9 ml·min^(-1))on the obtained particles was evaluated.Results revealed that the emulsion formulation of 20/80(O/W)with 1.5%(mass fraction)of Pluronic F-127 as stabilizer in the aqueous phase resulted in a stable nanoemulsion with droplet sizes in the range of 259-276 nm with a unimodal and sharp size distribution.The extract in the nanoemulsion was well protected at room temperature with a degradation rate of lycopene of about 50%during a month of storage time.The most stable emulsions were then processed by spray drying to obtain a dry powder.Spray drying was particularly successful when using maltodextrin as a coating agent,obtaining dried spherical particles with mean diameters of(4.87±0.17)μm with a smooth surface.The possibility of dissolving the spray dried powder in order to repristinate.The original emulsion was also successfully verified.

Insights into the enhancement of food flavor perception:strategies,mechanism and emulsion applications

The core drivers of the modern food industry are meeting consumer demand for tasty and healthy foods.The application of food flavor perception enhancement can help to achieve the goals of salt-and sugar-reduction,without compromising the sensory quality of the original food,and this has attracted increasing research attention.The analysis of bibliometric results from 2002 to 2022 reveals that present flavor perception enhancement strategies(changing ingredient formulations,adding salt/sugar substitutes,emulsion delivery systems)are mainly carry out based on sweetness,saltiness and umami.Emulsion systems is becoming a novel research foci and development trends of international food flavor perception-enhancement research.The structured design of food emulsions,by using interface engineering technology,can effectively control,or enhance the release of flavor substances.Thus,this review systematically summarizes strategies,the application of emulsion systems and the mechanisms of action of food flavor perception-enhancement technologies,based on odor-taste cross-modal interaction(OTCMI),to provide insights into the further structural design and application of emulsion systems in this field.

Pickering emulsion transport in skeletal muscle tissue:A dissipative particle dynamics simulation approach

Lymph node targeting is a commonly used strategy for particulate vaccines,particularly for Pickering emulsions.However,extensive research on the internal delivery mechanisms of these emulsions,especially the complex intercellular interactions of deformable Pickering emulsions,has been surprisingly sparse.This gap in knowledge holds significant potential for enhancing vaccine efficacy.This study aims to address this by summarizing the process of lymph-node-targeting transport and introducing a dissipative particle dynamics simulation method to evaluate the dynamic processes within cell tissue.The transport of Pickering emulsions in skeletal muscle tissue is specifically investigated as a case study.Various factors impacting the transport process are explored,including local cellular tissue environmental factors and the properties of the Pickering emulsion itself.The simulation results primarily demonstrate that an increase in radial repulsive interaction between emulsion particles can decrease the transport efficiency.Additionally,larger intercellular gaps also diminish the transport efficiency of emulsion droplet particles due to the increased motion complexity within the intricate transport space compared to a single channel.This study sheds light on the nuanced interplay between engineered and biological systems influencing the transport dynamics of Pickering emulsions.Such insights hold valuable potential for optimizing transport processes in practical biomedical applications such as drug delivery.Importantly,the desired transport efficiency varies depending on the specific application.For instance,while a more rapid transport might be crucial for lymph-node-targeted drug delivery,certain applications requiring a slower release of active components could benefit from the reduced transport efficiency observed with increased particle repulsion or larger intercellular gaps.

Anti-abrasion collagen fiber-based membrane functionalized by UiO-66-NH_(2)with ultra-high efficiency and stability for oil-in-water emulsions separation

Membrane separation strategies offer promising platform for the emulsion separation.However,the low mechanical strength of membrane separation layers and the trade-off between separation flux and efficiency present significant challenges.In this study,we report a CFM@UiO-66-NH_(2)membrane with high separation flux,efficiency and stability,through utilizing a robust anti-abrasion collagen fiber membrane(CFM)as the multifunctional support and UiO-66-NH_(2)by an in-situ growth as the separation layer.The high mechanical strength of the CFM compensated for the weakness of the separation layer,while the charge-breaking effect of UiO-66-NH_(2),along with the size sieving of its constituent separating layers and the capillary effect of the collagen fibers,contributed to the potential for efficient separation.Additionally,the CFM@UiO-66-NH_(2)membrane exhibited superhydrophilic properties,making it suitable for separating oil-in-water microemulsions and nanoemulsions stabilized by anionic surfactants.The membrane demonstrated remarkable separation efficiencies of up to 99.960%and a separation flux of370.05 L·m^(-2)·h^(-1).Moreover,it exhibits stability,durability,and abrasion resistance,maintaining excellent separation performance even when exposed to strong acids and alkalis without any damage to its structure and performance.After six cycles of reuse,it achieved a separation flux of 417.97 L·m^(-2)·h^(-1)and a separation efficiency of 99.747%.Furthermore,after undergoing 500 cycles of strong abrasion,the separation flux remained at 124.39 L·m^(-2)·h^(-1),with a separation efficiency of 99.992%.These properties make it suitable for the long-term use in harsh operating environments.We attribute these properties to the electrostatic effect resulting from the amino group on UiO-66-NH_(2)and its in-situ growth on the CFM,which forms a size-screening separation layer.Our work highlights the potential of the CFM@UiO-66-NH_(2)membrane as an environmentally friendly size-screening material for the efficient emulsion wastewater separation.

Ultrahydrophobic melamine sponge via interfacial modification with reduced graphene oxide/titanium dioxide nanocomposite and polydimethylsiloxane for oily wastewater treatment

Three-dimensional(3D)porous absorbents have attracted significant attention in the oily wastewater treatment technology due to their high porosity and elasticity.Given their amphiphilic surface,they have a propensity to simultaneously absorb water and oil,which restricts their range of applications.In this study,a reduced graphene oxide and titanium dioxide nanocomposite(rGO/TiO_(2))was used to fabricate an ultra-hydrophobic melamine sponge(MS)through interfacial modification using a solution immersion technique.To further modify it,poly-dimethylsiloxane(PDMS)was grafted onto its surface to establish stronger covalent bonds with the composite.The water contact angle of the sponge(rGO/TiO_(2)/PDMS/MS)was 164.2°,which satisfies the condition for ultrahydrophobicity.The evidence of its water repellency was demonstrated by the Cassie-Baxter theory and the lotus leaf effect.As a result of the increased density of rGO/TiO_(2)/PDMS/MS,it recorded an initial capacity that was 2 g/g lower than the raw MS for crude oil absorption.The raw MS retained 53% of its initial absorption capacity after 20 cycles of absorption,while rGO/TiO_(2)/PDMS/MS retained 97%,suggesting good recyclability.Excellent oil and organic solvent recovery(90%-96%)was demonstrated by rGO/TiO_(2)/PDMS/MS in oil-water combinations.In a continuous separation system,it achieved a remarkable separation efficiency of 2.4×10^(6)L/(m^(3)·h),and in turbulent emulsion separation,it achieved a demulsification efficiency of 90%-91%.This study provides a practical substitute for massive oil spill cleaning.

Phytocompounds and lipid-based drug delivery system for neurodegenerative diseases

Across the annals of time,organic molecules sourced from nature have found innumerable uses within the realms of healthcare,pharmaceuticals,and the study of living organisms.This abundant source of natural compounds has exhibited immense promise in the cure of diverse ailments,mainly neurodegenerative diseases owing to their minimum toxic and adverse effects.However,different challenges exist with phytocompounds from plants such as poor permeation,poor solubility(water/lipid),unsteadiness under extremely acidic pH conditions,and lack of targeting specificity.Furthermore,as a result of the existence of blood-brain barrier membrane and inconvenient pharmacokinetics characteristics of phytocompounds,their passage into the brain is constrained.In order to address this issue and augment the transportation of medications into the brain at a therapeutically effective level,it is imperative to formulate an innovative and pragmatic strategy.Many papers have shown that nanoformulations containing phytocompounds(resveratrol,quercetin,ferulic acid,curcumin,berberine,etc.)effectively improved many neurodegenerative diseases such as Parkinson’s,Alzheimer’s and Huntington’s diseases.This study provides an overview of phytocompounds that are used in nanosized lipid drug delivery systems.These systems are categorized according to lipid types and preparation techniques used in the formulation.Some studies regarding these systems and phytocompounds are also summarized.

Hyperspectral remote sensing identification of marine oil emulsions based on the fusion of spatial and spectral features

Marine oil spill emulsions are difficult to recover,and the damage to the environment is not easy to eliminate.The use of remote sensing to accurately identify oil spill emulsions is highly important for the protection of marine environments.However,the spectrum of oil emulsions changes due to different water content.Hyperspectral remote sensing and deep learning can use spectral and spatial information to identify different types of oil emulsions.Nonetheless,hyperspectral data can also cause information redundancy,reducing classification accuracy and efficiency,and even overfitting in machine learning models.To address these problems,an oil emulsion deep-learning identification model with spatial-spectral feature fusion is established,and feature bands that can distinguish between crude oil,seawater,water-in-oil emulsion(WO),and oil-in-water emulsion(OW)are filtered based on a standard deviation threshold–mutual information method.Using oil spill airborne hyperspectral data,we conducted identification experiments on oil emulsions in different background waters and under different spatial and temporal conditions,analyzed the transferability of the model,and explored the effects of feature band selection and spectral resolution on the identification of oil emulsions.The results show the following.(1)The standard deviation–mutual information feature selection method is able to effectively extract feature bands that can distinguish between WO,OW,oil slick,and seawater.The number of bands was reduced from 224 to 134 after feature selection on the Airborne Visible Infrared Imaging Spectrometer(AVIRIS)data and from 126 to 100 on the S185 data.(2)With feature selection,the overall accuracy and Kappa of the identification results for the training area are 91.80%and 0.86,respectively,improved by 2.62%and 0.04,and the overall accuracy and Kappa of the identification results for the migration area are 86.53%and 0.80,respectively,improved by 3.45%and 0.05.(3)The oil emulsion identification model has a certain degree of transferability and can effectively identify oil spill emulsions for AVIRIS data at different times and locations,with an overall accuracy of more than 80%,Kappa coefficient of more than 0.7,and F1 score of 0.75 or more for each category.(4)As the spectral resolution decreasing,the model yields different degrees of misclassification for areas with a mixed distribution of oil slick and seawater or mixed distribution of WO and OW.Based on the above experimental results,we demonstrate that the oil emulsion identification model with spatial–spectral feature fusion achieves a high accuracy rate in identifying oil emulsion using airborne hyperspectral data,and can be applied to images under different spatial and temporal conditions.Furthermore,we also elucidate the impact of factors such as spectral resolution and background water bodies on the identification process.These findings provide new reference for future endeavors in automated marine oil spill detection.

Preparation and Characterization of Biobased Dehydroabietyl Polyethylene Glycol Glycidyl Ether-Grafted Hydroxyethyl Cellulose with High Emulsifying Property

Dehydroabietyl polyethylene glycol glycidyl ether-grafted hydroxyethyl cellulose(HEC)polymer surfactant(DA(EO)5GE-g-HEC)was prepared using ring-opening polymerization with biobased rosin and hydroxyethyl cellulose as feedstocks.Dehydroabietyl polyethylene glycol glycidyl ether(DA(EO)5GE)was formed by condensation of dehydroabietyl alcohol polyoxyethylene ether(Rosin derivative:DA(EO)5H)and epichlorohydrin.The grafting degree of DA(EO)5GE-g-HEC was manipulated by adjusting the mass ratio of HEC and DA(EO)5GE and confirmed by EA.According to the formula,when m(HEC)/m(DA(EO)2GE)was 1:1~1:5,the grafting rate of DA(EO)5GE in DA(EO)5GE-g-HEC varied from 34.43%to 38.33%.The surface activity and foam properties of DA(EO)5GE-g-HEC aqueous solution were studied.The results showed that with the increase in grafting rate,the critical micellar concentration(CMC)in aqueous solution changed from 1.28 to 0.96 g/L.The results of the thermogravimetric analysis showed that the temperature range of the main stage of mass loss of DA(EO)5GE-g-HEC was 310°C~410°C,and the thermal decomposition processes of the samples with five mass ratios were similar.An oil in water emulsion was prepared by choosing cyclohexane as the oil phase and DA(EO)5GE-g-HEC as the emulsifier.The effect of DA(EO)5GE-g-HEC mass fraction on emulsion particle size and stability was analyzed.The results suggested that when the oil-water ratio was 8:2 with 0.4%emulsifier,the emulsion droplets were the smallest in terms of particle size and were the most stable.The rheological test results showed that the apparent viscosity decreased with the increase in shear rate and showed a typical elastic gel phenomenon.

Effect of fermented polypeptide of Sacha Inchi(Plukenetia volubilis L.)on the structure of liquid crystal emulsion

In order to study the action mechanism of Sacha Inchi polypeptide in liquid crystal emulsion,oil-in-water liquid crystal emulsions with Sacha Inchi fermented polypeptide as the active component were prepared.The microstructures,particle sizes,stabilities,thermodynamic properties,and rheological properties of liquid crystal emulsions with different concentrations of the fermentation products were observed by Polarizing microscope,Particle size meter,Thermogravimetric differential thermal synchronous measurement system,and Rheometer,respectively.The results showed that the average particle size of fermented peptide liquid crystal emulsion was(25.7±2.8)μm,and the liquid crystal structure was complete and stable.The content of bound water and liquid crystal in the emulsion with 1%Sacha Inchi polypeptide were higher than those in the blank emulsion and the emulsions with 3%and 5%Sacha Inchi polypeptide.Rheological results indicated that the viscosity of liquid crystal emulsion with the change curve of shear rate registered the shear thinning phenomenon,which belongs to non-Newtonian fluid.The hysteresis area,energy storage modulus,and loss modulus of the 1%additive amount of liquid crystal emulsion were larger than those of the blank emulsion and the emulsions with 3%and 5%Sacha Inchi polypeptide,indicating greater thixotropy and stronger shear resistance.The hydrophilic amino acid residues of the peptide in the 1%additive amount of the emulsion were combined with the water phase,while the hydrophobic amino acid residues of the peptide entered the oil phase,which formed a viscoelastic film at the oil-water interface,so that the liquid crystal emulsion had a more stable gel network structure.

Study on the preparation and properties of sunscreen O/W/Si multiple emulsion

To solve the greasiness and irritation risks brought about by organic sun-screening agents in sunscreen emulsions,in this work,a sunscreen O/W/Si multiple emulsion was prepared by two-step emulsification method,in which the outer oil phase was silicone oil and the inner oil phase was solid lipid nanoparticles coated with organic sun-screening agent.Several influencing factors on the formation and stability of the emulsion were analyzed,including inorganic salts,the volume fraction of outer oil phase(silicone oil),and the dosage of W/O emulsifier.The in vitro sunscreen performance,water resistance and skin permeability of different types of sunscreen emulsions were further studied.The results showed that the sunscreen O/W/Si multiple emulsion containing 22.5%silicone oil,2.5%emulsifier and 0.2%NaCl had the best stability under the experimental conditions.The SPF value and water resistance of sunscreen O/W/Si multiple emulsion were slightly higher than those of sunscreen W/O emulsion,but significantly higher than those of sunscreen O/W emulsion.Compared with sunscreen W/O emulsion,the in vitro transdermal permeability of organic sun-screening agent in sunscreen O/W/Si multiple emulsion was reduced by approximately 60%,indicative of higher safety and good application prospect in sunscreen cosmetics.

Experimental investigation on using CO_(2)/H_(2)O emulsion with high water cut in enhanced oil recovery

CO_(2) emulsions used for EOR have received a lot of interest because of its good performance on CO_(2)mobility reduction.However,most of them have been focusing on the high quality CO_(2) emulsion(high CO_(2) fraction),while CO_(2) emulsion with high water cut has been rarely researched.In this paper,we carried out a comprehensive experimental study of using high water cut CO_(2)/H_(2)O emulsion for enhancing oil recovery.Firstly,a nonionic surfactant,alkyl glycosides(APG),was selected to stabilize CO_(2)/H_(2)O emulsion,and the corresponding morphology and stability were evaluated with a transparent PVT cell.Subsequently,plugging capacity and apparent viscosity of CO_(2)/H_(2)O emulsion were measured systematically by a sand pack displacement apparatus connected with a 1.95-m long capillary tube.Furthermore,a high water cut(40 vol%) CO_(2)/H_(2)O emulsion was selected for flooding experiments in a long sand pack and a core sample,and the oil recovery,the rate of oil recovery,and the pressure gradients were analyzed.The results indicated that APG had a good performance on emulsifying and stabilizing CO_(2) emulsion.An inversion from H_(2)O/CO_(2) emulsion to CO_(2)/H_(2)O emulsion with the increase in water cut was confirmed.CO_(2)/H_(2)O emulsions with lower water cuts presented higher apparent viscosity,while the optimal plugging capacity of CO_(2)/H_(2)O emulsion occurred at a certain water cut.Eventually,the displacement using CO_(2)/H_(2)O emulsion provided 18.98% and 13.36% additional oil recovery than that using pure CO_(2) in long sand pack and core tests,respectively.This work may provide guidelines for EOR using CO_(2) emulsions with high water cut.

Preparation of 20 (S)-protopanaxadiol PLGA Nanoparticles

[Objectives]To prepare 20(S)-protopanaxadiol PLGA nanoparticles(20(S)-PPD-PLGA-NPs).[Methods]20(S)-PPD-PLGA-NPs were prepared by emulsion solvent evaporation method,and the optimal formulation was screened by Box-Behnken experiment with particle size and drug loading as the indicators through single factor experiment,and the drug release in vitro was carried out.[Results]The average diameter of the nanoparticles was(119.60±2.29)nm and the polydispersity index was(0.12±0.02),the size was uniform.The encapsulation efficiency and drug loading of protopanaxadiol were(87.99±1.29)%and(14.86±0.25)%,respectively.[Conclusions]The 20(S)-PPD-PLGA-NPs were successfully prepared by emulsion solvent evaporation method,and the 20(S)-PPD-PLGA-NPs had good stability,to lay a foundation for the study of 20(S)-PPD-PLGA-NPs in vitro and in vivo.

Eudragit®-PEG Nanoparticles: Physicochemical Characterization and Interfacial Tension Measurements

The objectives of this study are to understand the mechanisms involved in the stabilization of water/oil interfaces by polymeric nanoparticles (NPs) (Eudragit®). Eudragit L100 NPs of various sizes and Zeta potentials were studied and compared at a water/cyclohexane model interface using a droplet tensiometer (Tracker Teclis, Longessaigne, France). The progressive interfacial adsorption of the NPs in the aqueous phase was monitored by tensiometry. The model interface was maintained and observed in a drop tensiometer, analyzed via axisymmetric drop shape analysis (ADSA), to determine the interfacial properties. Given the direct relationship between the stability of Pickering emulsions (emulsions stabilized by solid nanoparticles) and the interfacial properties of these layers, different nanoparticle systems were compared. Specifically, Eudragit NPs of different sizes were examined. Moreover, the reduction of the Zeta potential with PEG-6000 induces partial aggregation of the NPs (referred to as NP flocs), significantly impacting the stability of the interfacial layer. Dynamic surface tension measurements indicate a significant decrease in interfacial tension with Eudragit® nanoparticles (NPs). This reduction correlates with the size of the NPs, highlighting that this parameter does not operate in isolation. Other factors, such as the contact angle and wettability of the nanoparticles, also play a critical role. Notably, larger NPs further diminished the interfacial tension. This study enhances our understanding of the stability of Pickering emulsions stabilized by Eudragit® L100 polymeric nanoparticles.

Influence of the Powder on the Properties of the Liquid Crystal Emulsions

The purpose of study was to evaluate the effect of four powder including titanium dioxide,bismuth oxychloride,silica,and kaolin on the properties of the liquid crystal emulsions.The results show that the addition of titanium dioxide and bismuth oxychloride had no obvious effect on the liquid crystal structure.In addition,the addition of Kaolin and silica have an effect on the stability of the liquid crystal structure.Sensory evaluation and Texture analyzer results shown that the addition of titanium dioxide and bismuth oxychloride had no obvious effect on the spreadability of liquid crystal system.The addition of silica and Kaolin was increased the hardness and adhesive of the liquid crystal system.Rheological experiments shown that the kaolin system had lower structural stability.the system with titanium dioxide,bismuth oxychloride,and silica has good stability.This paper provides data support for the application of powders in the formulation of liquid crystal system,which aims to provide a data basis for the preparation and applications of liquid crystal emulsion.

Smart emulsion system driven by light-triggered ionic liquid molecules and its application in eco-friendly water-saving dyeing

The smart emulsification and demulsification system with the light response is a useful tool in various industries,including green chemistry,catalytic reaction,pharmaceuticals,and environmental remediation.Herein,an ionic liquid crystal compound with a light triggered switch based on the azobenzene group[(4-{3-methyl-1-[3-(8-octyloxyoctyl)oxy-4-oxobutanoyl]imidazo-lium-1-yl}octyl)oxy]-N-(4-methylphenyl)benzene-1,2-diazene bromide(MOIAzo),was designed and synthesized,which could cause reversible transition between emulsification and demulsification through the light trigger.The ionic liquid has an efficient photoinduced liquefaction process,which dramatically lowers the melting point of ionic liquids from 79 to 9.2 oC.This significantly broadens the liquid state temperature of the ionic liquid crystal.The ionic liquid crystal MOIAzo exhibits both photoinduced and thermally induced nematic liquid crystal properties.The smart emulsion system was effectively employed in an eco-friendly water-saving dyeing process of cationic dyes for cationic dyeable polyester(CDP)fabrics,which used only half the amount of water compared with the conventional water bath dyeing method.After dyeing,the oil and water phases can be efficiently separated through the light irradiation,and the oil phase can be reused for the subsequent dyeing process.This novel smart emulsion dyeing method greatly reduces the water consumption and wastewater discharge.MOIAzo as a lighttriggered ionic liquid molecule opens up new dimensions in green chemistry.

气相色谱-质谱法对乳化炸药及其残留物中特征组分的分析

The emulsible explosives and its post-blast residues were analyzed by gas chromatography-mass spectrometry(GC-MS).A sensitive analysis method has been established.

Effects of Different Heavy Crude Oil Fractions on the Stability of Oil-in-water Emulsions —— Isolation of functional fractions from heavy crude oil and study of their properties

The functional fractions (acid, basic, amphoteric and neutral fractions) are isolated from the Liaohe Du-84 heavy crude oil and Shengli Gudao Kenxi heavy crude oil by ion-exchange chromatography, but the conventional fractions (saturates, aromatics, resins and asphaltenes) are also isolated from the heavy crude oil. These components have been characterized by spectroscopic methods (FT-IR), namely acid number, basic nitrogen number, ultimate analysis and molecular weight measurements using vapor pressure osmometry (VPO). The ion-exchange chromatography method based on separation by a functional group induces a little change on the nature of the crudes and reasonable mass balances can be easily obtained.

Preparation for Polyvinyl Alcohol Hollow Microsphere and Its Sustained Release Effect on Urea

[Objective] The aim of this study was to discuss the optimizing preparation conditions of polyvinyl alcohol(PVA)hollow microsphere and its application in the production of slow-release urea fertilizer.[Method]PVA hollow microsphere was prepared by the emulsion chemical cross-linking method,while its composition,morphology and particle size was analyzed by technologies of FT-IR,SEM and TEM respectively.Thus,factors such as rate of emulsified speed,crosslink temperature and linking agent amount with effects on morphology and particle size of hollow microsphere were also discussed in this study.Furthermore,based on the optimizing preparation conditions,PVA fertilizer carrier microsphere was prepared by coating urea to investigate its sustained release effect on urea.[Result]The optimizing preparation conditions of polyvinyl alcohol(PVA)hollow microsphere were as follows:rate of emulsified speed 6 000 r/min,crosslink temperature 35 ℃ and linking agent amount 25 ml.PVA fertilizer carrier microsphere had significant sustained release effect on urea,and the optimal cross-linking time was 3 hours.[Conclusion]This study provides theoretical basis for the development of new slow-release fertilizer.