Research on Instantaneous Angular Speed Signal Separation Method for Planetary Gear Fault Diagnosis

Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation of equipment. Existing methods for damage perception of planetary gear trains mainly rely on linear vibration analysis. However, these methods based on linear vibration signal analysis face challenges such as rich vibration sources, complex signal coupling and modulation mechanisms, significant influence of transmission paths, and difficulties in separating damage information. This paper proposes a method for separating instantaneous angular speed (IAS) signals for planetary gear fault diagnosis. Firstly, this method obtains encoder pulse signals through a built-in encoder. Based on this, it calculates the IAS signals using the Hilbert transform, and obtains the time-domain synchronous average signal of the IAS of the planetary gear through time-domain synchronous averaging technology, thus realizing the fault diagnosis of the planetary gear train. Experimental results validate the effectiveness of the calculated IAS signals, demonstrating that the time-domain synchronous averaging technology can highlight impact characteristics, effectively separate and extract fault impacts, greatly reduce the testing cost of experiments, and provide an effective tool for the fault diagnosis of planetary gear trains.

Blind recognition of k/n rate convolutional encoders from noisy observation

Blind recognition of convolutional codes is not only essential for cognitive radio, but also for non-cooperative context. This paper is dedicated to the blind identification of rate k/n convolutional encoders in a noisy context based on Walsh-Hadamard transformation and block matrix (WHT-BM). The proposed algorithm constructs a system of noisy linear equations and utilizes all its coefficients to recover parity check matrix. It is able to make use of fault-tolerant feature of WHT, thus providing more accurate results and achieving better error performance in high raw bit error rate (BER) regions. Moreover, it is more computationally efficient with the use of the block matrix (BM) method. © 2017 Beijing Institute of Aerospace Information.

Absolute multi-pole encoder with a simple structure based on an improved gray code to enhance the resolution

We developed a novel absolute multi-pole encoder structure to improve the resolution of the multi-pole encoder, realize absolute output and reduce the manufacturing cost of the encoder. The structure includes two ring alnicos defined as index track and sub-division track, respectively. The index track is magnetized based on the improved gray code, with linear halls placed around the track evenly. The outputs of linear halls show the region the rotor belongs to. The sub-division track is magnetized to N-S-N-S (north-south-north-south), and the number of N-S pole pairs is determined by the index track. Three linear hall sensors with an air-gap of 2 mm are used to translate the magnetic filed to voltage signals. The relative offset in a single N-S is obtained through look-up. The magnetic encoder is calibrated using a higher-resolution incremental optical encoder. The pulse output from the optical encoder and hall signals from the magnetic encoder are sampled at the same time and transmitted to a computer, and the relation between them is calculated, and stored in the FLASH of MCU (micro controller unit) for look-up. In the working state, the absolute angle is derived by looking-up with hall signals. The structure is simple and the manufacturing cost is very low and suitable for mass production.

The Performance Analysis of Traffic Channel Coding in Digital Trunking System

The encoding and decoding processes of traffic channel in digital trunking system are studied. On the basis of computer simulation, the BER (bit error ratio) with different RCPC decoding step is analyzed. As a result, the optimal RCPC decoding step is provided, which gives essential theoretical evidences for the implementation of digital trunking system.

Encoded cell grating array in anti-counterfeit technology

The dot matrix hologram (DMH) has been widely used in anti-counterfeiting label. With the same technology and cell array configuration, we can encode to the incidence beam. These codes can be some image matrix grating with different grating gap and different grating orientation. When the multi-level phase diffractive grating is etched, the incidence beam on the cell appears as an encoding image. When the encoded grating and DMH are used in the same label synchronously, the technology of multi-encoded grating array enhances the anti-counterfeit ability.

Blind frequency offset estimation based on cyclic prefix and virtual subcarriers in CO-OFDM system

A new blind frequency offset estimation method based on cyclic prefix and virtual subcarriers in coherent optical orthogonal frequency division multiplexing （CO-OFDM） system is presented. It is able to estimate the fractional part and integral part of frequency offset at the same time. Its estimation range is about [-3.5 GHz, 3.5 GHz]. The influence of the integral frequency offset is comprehensively analyzed in COOFDM system. Its performances in the additive white Gaussian noise （AWGN） channel and the dispersive channel are investigated, respectively. Simulation results indicate that even in the dispersive channel, when the optical signal-to-noise ratio （OSNR） is low, it can still work very well.

2×40 Gb/s OCDM using superstructure fiber Bragg gratings en/decoder

A 7-chip, 280 Gb/s optical code-division multiplexing （OCDM） system incorporating quaternary phase coding and decoding superstructured fiber Bragg gratings （SSFBGs） is experimentally demonstrated. Only ordinary phase masks and sub-micrometer precision are needed to fabricate the encoding and decoding SSFBGs. Interchannel interference noise is also considered and evaluated, 2-channel 40 （Gb/s）/channel （2 ×40 Gb/s） signal transmission is demonstrated.

Construction of type-Ⅱ QC-LDPC codes with fast encoding based on perfect cyclic difference sets

In view of the problems that the encoding complexity of quasi-cyclic low-density parity-check(QC-LDPC) codes is high and the minimum distance is not large enough which leads to the degradation of the error-correction performance, the new irregular type-Ⅱ QC-LDPC codes based on perfect cyclic difference sets(CDSs) are constructed. The parity check matrices of these type-Ⅱ QC-LDPC codes consist of the zero matrices with weight of 0, the circulant permutation matrices(CPMs) with weight of 1 and the circulant matrices with weight of 2(W2CMs). The introduction of W2CMs in parity check matrices makes it possible to achieve the larger minimum distance which can improve the error-correction performance of the codes. The Tanner graphs of these codes have no girth-4, thus they have the excellent decoding convergence characteristics. In addition, because the parity check matrices have the quasi-dual diagonal structure, the fast encoding algorithm can reduce the encoding complexity effectively. Simulation results show that the new type-Ⅱ QC-LDPC codes can achieve a more excellent error-correction performance and have no error floor phenomenon over the additive white Gaussian noise(AWGN) channel with sum-product algorithm(SPA) iterative decoding.

Joint scheme for symbol,sampling clock,and carrier frequency synchronization in PDM-CO-OFDM system beyond 100 Gb/s

We propose a joint scheme for symbol, sampling clock, and carrier frequency synchronization in a polarization division multiplexing coherent optical orthogonal frequency division multiplexing （PDM-CO-OFDM） system. Unlike other existing algorithms designed for specific impairment, the scheme can estimate and compensate for the interactional synchronization errors effectively without extra training overhead by building a comprehensive error model. The simulation shows that symbol synchronization error and sample timing error can be corrected by channel equalizer, and the estimation ranges of sampling frequency offset and normalized carrier frequency offset are about （-2000, 2000） ppm, and （-0.04 （-3.5）, 0.04 （3.5）） Ghz, respectively.

Performance evaluation of modulation formats in 40×40-Gb/s WDM repeaterless transmission systems

Transmission performance of six modulation formats is numerically compared in 40 × 40-Gb/s wavelength division multiplexing （WDM） repeaterless systems. The results indicate that return-to-zero differential phase shift keying （RZ-DPSK） （33% duty cycle） demonstrates the best performance among all the formats when the accumulated amplified spontaneous emission power （AASEP） is small. But with the increasing of AASEP, the superiority of RZ-DPSK transmission performance over the other five modulation formats is vanished. AASEP is justified to be the major source for the deterioration of the superiority.

Function-lock strategy in OR/NOR optical logic gates based on cross-polarization modulation effect in semiconductor optical amplifier

We have studied a function-lock strategy for all-optical logic gate （AOLG） utilizing the cross-polarization modulation （CPM） effect in a semiconductor optical amplifier （SOA）. By monitoring the power of logic light, the strategy realized controllable methods to capture OR and NOR functions and switch between them. The strategy has been successfully applied in experiment with 10-Gb/s not-return-to-zero （NRZ） signals, which has a high success-rate above 95% and ensures the high extinction ratio of result light above 11.4 dB. Every step in the strategy has definite numeric evaluation, which provides the potential of automatic implementation.

Stepped chirped fiber Bragg grating encoder/decoder for spectral OCDMA

Based on the coupled-mode theory of fiber grating and codes theory, the design of an optical code division multiple access (OCDMA) encoder/decoder with stepped chirped fiber Bragg grating (SCFBG) has been proposed. The length of each uniform subgrating, the realization of encoding and decoding are provided. Numerical result is also presented and discussed.

Joint estimation of frequency offset and chromatic dispersion based on the training sequences in M-ary QAM coherent optical transmission system

A data-aided method of joint frequency offset and chromatic dispersion estimation based on the Chu training sequences is shown in 112 Gb/s polarization-multiplexed （PM） quadrature phase-shift keying and 224 Gb/s PM-16-quadrature amplitude modulation with different pulse-shaping filters, respectively. The proposed method achieves a good accuracy and is verified to be robust to polarization mode dispersion.

A novel repetition space-time coding scheme for mobile FSO systems

Considering the influence of more random atmospheric turbulence, worse pointing errors and highly dynamic link on the transmission performance of mobile multiple-input multiple-output （MIMO） free space optics （FSO） communica- tion systems, this paper establishes a channel model for the mobile platform. Based on the combination of Alamouti space-time code and time hopping ultra-wide band （TH-UWB） communications, a novel repetition space-time coding （RSTC） method for mobile 2x2 free-space optical communications with pulse position modulation （PPM） is devel- oped. In particular, two decoding methods of equal gain combining （EGC） maximum likelihood detection （MLD） and correlation matrix detection （CMD） are derived. When a quasi-static fading and weak turbulence channel model are considered, simulation results show that whether the channel state information （CSI） is known or not, the coding sys- tem demonstrates more significant performance of the symbol error rate （SER） than the uncoding. In other words, transmitting diversity can be achieved while conveying the information only through the time delays of the modulated signals transmitted from different antennas. CMD has almost the same effect of signal combining with maximal ratio combining （MRC）. However, when the channel correlation increases, SER performance of the coding 2×2 system de- grades significantly.