Study of LDBPs Shaft Skin Friction for Piles in Cohesiove Soils

The methodology of predicting pile shaft skin ultimate friction has been studied in a systematic way. In the light of that, the analysis of the pile shaft resistance for bored and cast in situ piles in cohesive soils was carried out thoroughly in the basis of field performance data of 10 fully instrumented large diameter bored piles (LDBPs) used as the bridge foundation. The undrained strength index μ in term of cohesive soils was brought forward in allusion to the cohesive soils in the consistence plastic state, and can effectively combine the friction angle and the cohesion of cohesive soils in undrained condition. And that the classical ' α method' was modified much in effect to predict the pile shaft skin friction of LDBPs in cohesive soils. Furthermore, the approach of standard penetration test (SPT) N value used to estimate the pile shaft skin ultimate friction was analyzed, and the calculating formulae were established for LDBPs in clay and silt clay respectively.

A simplified approach for negative skin friction calculation of special-shaped pile considering pile-soil interaction under surcharge

A simplified approach was proposed to analyze the negative skin friction calculation of special-shaped pile considering pile-soil interaction under surcharge. Based on the concentric cylinder shearing theory, considering the changes of pile shape(such as, taper angle and diameters of pile base, etc.), the load-transfer of special-shaped pile was built. The accuracy of the developed simplified approach was verified by numerical simulation model with the same condition. Then, the influence factors, such as, taper angles, the diameter of pile base, surcharge, and pile-soil interface parameters were analyzed and discussed. The results show that the developed simplified approach can calculate NSF of special-shaped pile under surcharge effectively. A limited parametric study indicates that in many practical situations special-shaped piles(such as belled wedge pile shown in this work) offer a design option that is more economical than traditional uniform cross-section piles.

Finite element analysis of effect of soil displacement on bearing capacity of single friction pile

Effect of soil displacement on friction single pile in the cases of tunneling,surcharge load and uniform soil movement was discussed in details with finite element method.Lateral displacement of the pile caused by soil displacement reached about 90% of the total displacement,which means that P-Δ effect of axial load can be neglected.The maximum moment of pile decreased from 159 kN·m to 133 kN·m in the case of surcharge load when the axial load increased from 0 to the ultimate load.When deformation of pile caused by soil displacement is large,axial load applied on pile-head plays the role of reducing the maximum bending moment in concrete pile to some extent.When pile is on one side of the tunnel,soil displacements around the pile are all alike,which means that the soil pressures around the pile do not decrease during tunneling.Therefore,Q-s curve of the pile affected by tunneling is very close to that of pile in static loading test.Bearing capacities of piles influenced by surcharge load and uniform soil movement are 2480 kN and 2630 kN,respectively,which are a little greater than that of the pile in static loading test(2400 kN).Soil pressures along pile increase due to surcharge load and uniform soil movement,and so do the shaft resistances along pile,as a result,when rebars in concrete piles are enough,bearing capacity of pile affected by soil displacement increases compared with that of pile in static loading test.

Evaluation of the Ultimate Capacity of Friction Piles

The precise prediction of maximum load carrying capacity of bored piles is a complex problem because the load is a function of a large number of factors. These factors include method of boring, method of concreting, quality of concrete, expertise of the construction staff, the ground conditions and the pile geometry. To ascertain the field performance and estimate load carrying capacities of piles, in-situ pile load tests are conducted. Due to practical and time constraints, it is not possible to load the pile up-to failure. In this study, field pile load test data is analyzed to estimate the ultimate load for friction piles. The analysis is based on three pile load test results. The tests are conducted at the site of The Cultural and Recreational Complex project in Port Said, Egypt. Three pile load tests are performed on bored piles of 900 mm diameter and 50 m length. Geotechnical investigations at the site are carried out to a maximum depth of 60 m. Ultimate capacities of piles are determined according to different methods including Egyptian Code of practice (2005), Tan-gent-tangent, Hansen (1963), Chin (1970), Ahmed and Pise (1997) and Decourt (1999). It was concluded that approxi- mately 8% of the ultimate load is resisted by bearing at the base of the pile, and that up to 92% of the load is resisted by friction along the shaft. Based on a comparison of pile capacity predictions using different method, recommendations are made. A new method is proposed to calculate the ultimate capacity of the pile from pile load test data. The ultimate capacity of the bored piles predicted using the proposed method appears to be reliable and compares well to different available methods.

Theoretical Formula for Calculating Negative Skin Friction of Pile in Layered Soil and Its Application

Based on Zeevaert＇s method, a theoretical formula was developed to calculate the negative skin friction of pile in layered soil. For practical purpose,a cut-and-try method was proposed to determine neutral point. Case studies indicate that the total calculated negative skin friction was in agreement with the measured one, which verifies the feasibility and practicability of theoretical formula. Furthermore, the methods for calculating efficiency factor of drag load and settlement were also given.

EFFECT OF SKIN FRICTION ON THE DIRECTIONAL STABILITY OF DRIVEN PILES DURING DRIVING

In this paper, the driving forces at a pile top are considered as a periodic load during driving and the Mathieu equation is derived. From the stability charts of this equation, we can obtain the critical length of the pile, and the effect of skin friction upon the critical length is discussed.

基坑开挖对管桩竖向承载性状影响研究

针对基坑开挖引起管桩挤土效应的弱化,以及挤土效应弱化对管桩承载性质影响问题,开展了室内模型试验,并通过对模型试验进行数值建模,验证了数值模型的可靠性。在此基础上,从桩长、桩间距、桩侧摩阻力系数对开挖卸荷影响下管桩基础承载性状的影响展开研究。结果表明:开挖卸荷对管桩承载特性造成较大影响,极限承载力对应桩顶沉降量提高54.5%;数值计算发现,卸载前后极限荷载所对应最大沉降差率为9.52%,满足工程精度要求,验证了所提数值模型的可靠性;数值计算结果表明,随桩长提高,最大桩身轴力位置不断上升,而中性点位置却不断下降;桩间距越小,开挖卸荷对桩身轴力影响越大,而对负摩阻力影响越小;摩阻力系数为0.3时,摩阻力系数对桩身轴力及桩侧摩阻力发挥敏感度最高。

Loading Sequence Effects on Dragload and Downdrag for Pile Foundation

Negative skin friction (NSF) is one of the important problems when designing a pile foundation. However, the influence of loading sequence on the dragload and downdrag for pile foundation is seldom studied. In this paper, a three-dimensional numerical model was established using FLAC3D. Compared with the results of model test, the established model could be used to study the NSF of pile foundation. The influencing factors were discussed including the length-diameter ratio of pile and the loading sequence of pile head load and surcharge. A case history was analyzed using FLAC3D. The calculated results are in good agreement with the measured results. It is concluded that the dragload and downdrag are remarkably influenced by the loading sequence of pile head load and surcharge. The dragload and downdrag reach the maximum values under the condition of surcharge after pile head load.

Dragload and Downdrag Performances of Inclined Pile Group Embedded in Consolidating Soil

The performance of inclined pile group embedded in consolidating soil under surcharge load was investigated by experiment in comparison with vertical pile group and single pile under the same conditions; dragload, downdrag, and layered soil settlement were measured. A three-dimensional numerical model was built via FLAC3D software, and verified by the experimental results. Influence factors, such as consolidation time, pile spacing, and pile tilt angle were analyzed. The results show that dragload of inclined pile group increases with the increase of consolidation time and pile spacing or the decrease of pile tilt angle. Downdrag of inclined pile group increases with the increase of consolidation time, pile spacing and pile tilt angle.

Analysis of bearing capacity of pile foundation in discontinued permafrost regions

Piles are the main building foundation in permafrost regions. Thawing the permafrost foundation would have a negative effect on a pile, and may cause damage to the building. This paper focuses on the effects of negative friction force due to the melt of permafrost, and presents four calculated methods for bearing capacity of a pile. An engineering station was taken as an example, where the lengths of a pile were compared based on four methods. Finally, quick field load tests were carried out, and some meaningful conclusions are presented. Thus, these analytical results can be used to design a pile for permafrost regions.

Three-dimensional elasto-plastic finite element analysis of a soil-pilebridge interaction

The soil-pile-bridge interaction of super-large pile groups is a very complex issue for the design of deep pile group foundations. In this paper, the load distribution on the pile top of a super large bridge foundation and its influential factors are analyzed comprehensively using a three-dimensional elasto-plastic finite element method. The adopted model and its input parameters are firstly verified by comparing the numerical results with the measured data of static loading tests of a single pile. Numerical analysis is then performed to investigate the load distribution and the load-settlement characteristics of super-large pile groups, and the models are verified using centrifuge laboratory model testing data. The mechanism of the interaction between pile groups and soil under different conditions is explored.

Bearing Behavior of Cast-in-Place Expansive Concrete Pile in Coral Sand Under Vertical Loading

The low side friction of piles in coral sand results in the low bearing capacity of foundations.In this paper,expansive concrete pile is utilized to improve the bearing capacity of pile foundations in coral sand.Both model tests and numerical simulation are performed to reveal the bearing mechanism of expansive concrete pile in coral sand.Results showed that the lateral earth pressure near pile increases obviously and the side friction of piles is improved,after adding expansion agent to the concrete.The horizontal linear expansion is 1.11%and the bearing capacity increased 41%for the pile,when 25%expansion agent is added.Results in finite element numerical simulation also show that ultimate bearing capacity increases with the increase of the linear expansion ratio.Besides,the area for obvious increase in side friction is below the surface of soil about three times the pile diameter,and the expansion leads to a high side friction sharing of the pile.Therefore,the cast-in-place expansive concrete pile is effective in improving the bearing capacity of piles in coral sand.

THE APPLICATION OF THE FINITE PRISM ELEMENT METHOD TO THE ELASTO PLASTIC ANALYSIS OF SINGLE PILE SOIL INTERACTION SYSTEM

In this paper, a finite prism element procedure is presented, and a new infinite prism element for modelling the semi infinite domain boundary condition is developed to expedite the (3D) calculations in a more accurate way for the far stress field to the pile. It has been taken into account that the soil is restrained by the pile cap, and the relative displacement happens between the pile and the soil. Revised Cambridge model is incoporated in the procedure for modelling elasto plastic behavior of the soil. In this paper, the single long friction pile with a pile cap and soil system are analyzed. The proper load displacement curve and frictional resistance distribution curve are obtained. The results can provide the basis for design and calculation of the long piled foundation.

Numerical Study of Piles Group under Seismic Loading in Frictinal Soil—Inclination Effect

Recent devastating earthquakes in some countries, such as Pakistan, Turkey, Algeria and China, call to the mind the high risk exposure of Lebanon which is located over an active seismic zone. Many experts shared the view that major seismic event may occur in Lebanon in the future. Moreover, many earthquakes, of low magnitudes between three and four, have been registered in Lebanon during 2008. These events have increased the anxiety of Lebanese people because of the poor quality of the constructions and their behavior under moderate or severe earthquake events. The efficient way to minimize seismic effects, material and human losses, is the prevention. The system piles-foundation is an appropriate way and widely used to ensure the stability of constructions when subjected to seismic excitation. It seems necessary to study the interaction of pile-foundation-pile-cap-structure in the case of non linear soil behavior and the interface pile-soil. The study will be also conducted by using measures recorded during real earthquakes for example in Turkey (Kocaeli, 1999). In this paper, we present a numerical modeling of the interaction of using FLAC3D software. According to soil behavior and pile inclination, parametric studies are also performed. The analysis of the results could give the better piles group configuration in order to minimize the seismic effect on the structures.

Numerical Study of the Interaction between a Reinforced Concrete Pile and Soil

This paper proposes a numerical simulation of the mechanical behavior of a reinforced concrete pile foundation under an axial load. In fact, the foundation of a structure represents the essential structural part of it, because it ensures its bearing capacity. Among the types of foundation, deep foundation is the one for which from a mechanical point of view, the justification takes into account the isolated or combined effects of base resistance offered by the soil bed and lateral friction at the soil-pile interface;the latter being the consequence of a large contact surface with the surrounding soil;hence the need to study the interaction between the soil and the pile in service, in order to highlight the characteristics of soil which influence the mechanical behavior of pile and therefore the stability of the structure. In this study, the reinforced concrete pile is supposed to be elastic, and characterized by a young’s modulus (E) and a Poisson’s ratio (ν). The soil obeys to a Camclay model characterized by a cohesion (c), an initial voids ratio (e0), shearing resistance angle (φ) and a pre-consolidation pressure (P0). A joint model with a Mohr Coulomb behavior characterizes the soil-pile interface. The loading is carrying out by imposing a vertical monotonic displacement at the head of pile. The results in terms of stress and displacement show that the bearing capacity of the pile is influenced by various soils characteristics, it appears that the vertical stress and the force mobilized at rupture increase when the initial pre_consolidation pressure, the cohesion and the internal friction angle of soil increase;and when the initial soil voids index decreases.

Dynamic and Field Analysis of Pile Driving in Cameroun

Complexity and implementation of design norms in Cameroon required a proven foreign expertise, but nowadays local engineers are mastering modern construction techniques. They are turning to pile foundations to solve the problem of construction sites on weak soils. The objective of this work is to present the trend of the country pile-driving capacity of some foundations design and construction companies. The proposed analytical method is based on Finite Element Method and on the theory of wave＇s propagation and transmission along the pile taking into account experimental data on the construction site. The proposed method is validated through recorded data during the construction of the Mungo Bridge in Cameroon, and obtained analytical results are in agreement with experimental results.

杂填土地基中螺杆桩竖向承载特性研究

为了研究杂填土地基中螺杆桩竖向承载特性,基于极限平衡理论分析了桩-土咬合机理,结合桩-土之间的相互作用得到螺纹段等效侧阻力增大系数,在此基础上建立了单桩竖向承载力计算公式,并对杂填土地基中螺杆桩单桩进行缩尺模型试验。结果表明,螺杆桩在竖向荷载作用下,荷载-沉降曲线经历了弹性、弹塑性、塑性破坏3个阶段。根据模型试验所得桩身轴力和桩侧等效侧阻力沿深度的分布规律,总体上螺纹段等效侧阻力高于直杆段。当桩体达到极限承载力时,试验所得等效侧阻力扩大系数与理论分析结果基本一致。

The Effect of Structural Parameters on The Compression Resilience of Uncut Woven Pile Fabrics

If an uncut woven pile fabric is to be subjected to compressive load in use its compression resilience performance becomes very crucial.In order to optimize the extent of recovery in fabric thickness when the applied force is removed,thirteen uncut woven pile fabric samples were woven and tested on KES-G5 Hand Type Compression Tester (small compress Hammer).The results show that the above parameters influence compression resilience property of the uncut woven pile fabrics,and the structural factors have a more pronounced effect as compared to effect of fibre and yarn type.

湿陷性黄土地基中桩基负摩阻力计算新方法

负摩阻力对湿陷性黄土地基中桩基的承载变形性状具有重要影响,现行桩基规范及黄土规范推荐的负摩阻力计算方法不能反映黄土桩基负摩阻力的实际性状。对近30年来在黄土地区开展的钢筋混凝土灌注桩现场浸水试验实测数据进行统计,分析黄土浸水完成后桩身中性点深度、桩身最大负摩阻力深度及负摩阻力系数与桩长径比的关系,通过线性拟合得到了中性点深度比、最大负摩阻力深度比及负摩阻力系数与桩长径比的经验表达式,提出湿陷性黄土地基中桩基负摩阻力计算的新方法。新方法用三角形表示负摩阻力沿深度的分布,能反映负摩阻力从桩顶向下先逐渐增大、达到最大值后随深度增加逐渐减小、最终在中性点处减小为零的分布特征。将提出的方法、桩基规范及黄土规范方法的计算结果与实测结果进行对比,结果表明,桩基规范预测的中性点深度比优于黄土规范,黄土规范预测的最大下拉荷载优于桩基规范,而用新方法计算的负摩阻力最接近实测结果。

抗拔桩承载能力影响因素与群桩变形规律试验研究

利用自主研发的桩基室内抗拔测试装置,结合数值模拟技术对抗拔桩的承载破坏过程及影响因素、群桩的协同工作特征展开了深入研究。结果表明:抗拔桩的承载破坏经历4个阶段,承载初期,桩顶侧摩阻力最先发挥作用,桩顶土体发生塑性破坏;随上拔荷载不断增大,桩体产生相对位移,桩周土体由于桩身侧摩阻力产生塑性破坏;当桩身轴力自桩顶传递至桩底时,桩身底端产生抗拔“吸附力”,并伴随局部土体塑性破坏;随着桩周土体塑性区的拓展、连通,抗拔桩承载能力达到极限;桩身长径比、桩-土界面摩擦因数、桩侧土体压力与其承载极限呈正相关关系,其中桩身长径比对桩端“吸附力”具有重要影响;群桩抗拔过程中,角桩侧摩阻力发挥最充分,桩身位移量最小,极限承载力最大,中心桩桩身位移最大,极限承载力最低;距径比影响抗拔桩的群桩效应,当距径比从2增大至8时,桩身侧摩阻力提高30%,将距径比8作为群桩工程的推荐值,6~10作为群桩距径比的推荐范围。