Energy capability enhancement for isolated extended drain NMOS transistors

Isolated extended drain NMOS（EDNMOS） transistors are widely used in power signal processing.The hole current induced by a high electric field can result in a serious reliability problem due to a parasitic NPN effect. By optimizing p-type epitaxial（p-epi） thickness,n-type buried layer（BLN） and nwell doping distribution,the peak electric field is decreased by 30%and the peak hole current is decreased by 60%,which obviously suppress the parasitic NPN effect.Measured I-V characteristics and transmission line pulsing（TLP） results show that the onstate breakdown voltage is increased from 28 to 37 V when 6 V V;is applied and the energy capability is improved by about 30%,while the on-state resistance remains unchanged.

Ballistic performance of spaced multi-ply soft fabrics: Experimental and numerical investigation

It has been reported that the ply gap influences the ballistic resistance of spaced multi-ply fabric systems,but its working mechanism was not well-understood. This paper reports the experimental and numerical approaches and results of an investigation on the mechanisms that enable the improved ballistic performance of spaced multi-ply systems. Penetration tests were performed over a range of impact velocities ranging from 200 m/s to 400 m/s. The results confirmed that the ply gap is beneficial to the energy absorption capability of the systems. This is because the front plies tend to absorb more energy when they are not immediately constrained by the rear plies. During a ballistic event, the gap relieves the reflection of the compressive pulse, prolonging the projectile engagement time with the front plies;on the other hand, the rear plies become increasingly less active in dissipating energy as the gap increases.When the gap is sufficiently widened to avoid any interference between the plies before the failure of the front ply, the responses of the whole system no longer vary. It was also found that the ballistic performance of the spaced systems is influenced by ply thickness, impact velocity, and the stacking order of the ply gap.

Hollow carbon nanofibers with dynamic adjustable pore sizes and closed ends as hosts for high-rate lithiumsulfur battery cathodes

Designing a better carbon framework is critical for harnessing the high theoretical capacity of Li-S batteries and avoiding their drawbacks, such as the insulating nature of sulfur, active material loss, and the polysulfide shuttle reaction. Here, we report an ingenious design of hollow carbon nanofibers with closed ends and protogenetic mesopores in the shell that can be retracted to micropores after sulfur infusion. Such dynamic adjustable pore sizes ensure a high sulfur loading, and more importantly, eliminate excessive contact of sulfur species with the electrolyte. Together, the high aspect ratio and thin carbon shells of the carbon nanofibers facilitate rapid transport of Li^＋ ions and electrons, and the closed-end structure of the carbon nanofibers further blocks polysulfide dissolution from both ends, which is remarkably different from that for carbon nanotubes with open ends. The obtained sulfur-carbon cathodes exhibit excellent performance marked by high sulfur utilization, superior rate capability （1,170, 1,050, and 860 mA.h.g-1 at 1.0, 2.0, and 4.0 C （1 C = 1.675 A·g^-1）, respectively）, and a stable reversible capacity of 847 mA·h·g^-1 after 300 cycles at a high rate of 2.0 C.