Modified Black Widow Optimization-Based Enhanced Threshold Energy Detection Technique for Spectrum Sensing in Cognitive Radio Networks

This study develops an Enhanced Threshold Based Energy Detection approach(ETBED)for spectrum sensing in a cognitive radio network.The threshold identification method is implemented in the received signal at the secondary user based on the square law.The proposed method is implemented with the signal transmission of multiple outputs-orthogonal frequency division multiplexing.Additionally,the proposed method is considered the dynamic detection threshold adjustments and energy identification spectrum sensing technique in cognitive radio systems.In the dynamic threshold,the signal ratio-based threshold is fixed.The threshold is computed by considering the Modified Black Widow Optimization Algorithm(MBWO).So,the proposed methodology is a combination of dynamic threshold detection and MBWO.The general threshold-based detection technique has different limitations such as the inability optimal signal threshold for determining the presence of the primary user signal.These limitations undermine the sensing accuracy of the energy identification technique.Hence,the ETBED technique is developed to enhance the energy efficiency of cognitive radio networks.The projected approach is executed and analyzed with performance and comparison analysis.The proposed method is contrasted with the conventional techniques of theWhale Optimization Algorithm(WOA)and GreyWolf Optimization(GWO).It indicated superior results,achieving a high average throughput of 2.2 Mbps and an energy efficiency of 3.8,outperforming conventional techniques.

A dual-RPA based lateral flow strip for sensitive,on-site detection of CP4-EPSPS and Cry1Ab/Ac genes in genetically modified crops

Traditional transgenic detection methods require high test conditions and struggle to be both sensitive and efficient.In this study,a one-tube dual recombinase polymerase amplification(RPA)reaction system for CP4-EPSPS and Cry1Ab/Ac was proposed and combined with a lateral flow immunochromatographic assay,named“Dual-RPA-LFD”,to visualize the dual detection of genetically modified(GM)crops.In which,the herbicide tolerance gene CP4-EPSPS and the insect resistance gene Cry1Ab/Ac were selected as targets taking into account the current status of the most widespread application of insect resistance and herbicide tolerance traits and their stacked traits.Gradient diluted plasmids,transgenic standards,and actual samples were used as templates to conduct sensitivity,specificity,and practicality assays,respectively.The constructed method achieved the visual detection of plasmid at levels as low as 100 copies,demonstrating its high sensitivity.In addition,good applicability to transgenic samples was observed,with no cross-interference between two test lines and no influence from other genes.In conclusion,this strategy achieved the expected purpose of simultaneous detection of the two popular targets in GM crops within 20 min at 37°C in a rapid,equipmentfree field manner,providing a new alternative for rapid screening for transgenic assays in the field.

Novel cyber-physical collaborative detection and localization method against dynamic load altering attacks in smart energy grids

Owing to the integration of energy digitization and artificial intelligence technology,smart energy grids can realize the stable,efficient and clean operation of power systems.However,the emergence of cyber-physical attacks,such as dynamic load-altering attacks(DLAAs)has introduced great challenges to the security of smart energy grids.Thus,this study developed a novel cyber-physical collaborative security framework for DLAAs in smart energy grids.The proposed framework integrates attack prediction in the cyber layer with the detection and localization of attacks in the physical layer.First,a data-driven method was proposed to predict the DLAA sequence in the cyber layer.By designing a double radial basis function network,the influence of disturbances on attack prediction can be eliminated.Based on the prediction results,an unknown input observer-based detection and localization method was further developed for the physical layer.In addition,an adaptive threshold was designed to replace the traditional precomputed threshold and improve the detection performance of the DLAAs.Consequently,through the collaborative work of the cyber-physics layer,injected DLAAs were effectively detected and located.Compared with existing methodologies,the simulation results on IEEE 14-bus and 118-bus power systems verified the superiority of the proposed cyber-physical collaborative detection and localization against DLAAs.

Research on Low Energy Consumption Distributed Fault Detection Mechanism in Wireless Sensor Network

Wireless sensor network is an important technical support for ubiquitous communication. For the serious impacts of network failure caused by the unbalanced energy consumption of sensor nodes, hardware failure and attacker intrusion on data transmission, a low energy consumption distributed fault detection mechanism in wireless sensor network(LEFD) is proposed in this paper. Firstly, the time correlation information of nodes is used to detect fault nodes in LEFD, and then the spatial correlation information is adopted to detect the remaining fault nodes, so as to check the states of nodes comprehensively and improve the efficiency of data transmission. In addition, the nodes do not need to exchange information with their neighbor nodes in the initial detection process since LEFD adopts the data sensed by node itself to detect some types of faults, thus reducing the energy consumption of nodes effectively. Finally, LEFD also considers the nodes that may have transient faults. Performance analysis and simulation results show that the proposed detection mechanism can improve the transmission performance and reduce the energy consumption of network effectively.

An Improved Modal Strain Energy Method for Damage Detection in Offshore Platform Structures

The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy （IMSE） method for detecting damage in offshore platform structures based on a traditional modal strain energy method （the Stubbs index method）. The most significant difference from the Stubbs index method was the application of modal frequencies. The goal was to improve the robustness of the traditional method. To demonstrate the effectiveness and practicality of the proposed IMSE method, both numerical and experimental studies were conducted for different damage scenarios using a jacket platform structure. The results demonstrated the effectiveness of the IMSE method in damage location when only limited, spatially incomplete, and noise-polluted modal data is available. Comparative studies showed that the IMSE index outperformed the Stubbs index and exhibited stronger robustness, confirming the superiority of the proposed approach.

Cooperative Spectrum Sensing over Generalized Fading Channels Based on Energy Detection

This paper analyzes the unified performance of energy detection(ED) of spectrum sensing(SS) over generalized fading channels in cognitive radios(CRs). The detective performance of SS will be obviously affected by fading channels among communication nodes, and ED has the advantages of fast implementation, no requirement of priori received information and low complexity, so it is meaningful to investigate ED over various fading channels. The probability density function(p.d.f.) of α-κ-μ distribution is derived to evaluate energy efficiency for sensing systems.The detection probability with Marcum-Q function has been derived and the close-form expressions with moment generating function(MGF) method are deduced to achieve SS.Furthermore, exact closed-form analytic expressions for average area under the receiver operating characteristics curve( AUC) also have been deduced to analyze the performance characteristics of ED over α-κ-μ fading channels.Besides, cooperative spectrum sensing(CSS) with diversity reception has been applied to improve the detection accuracy and mitigate the shadowed fading features with OR-rule. At last, the results show that the detection capacity of ED will be evidently affected by α-κ-μ fading channels, but appropriate channel parameters can improve sensing performance. In addition, the establishedED-fading pattern is approved by simulations,and it can significantly enhance the detection performance of proposed algorithms.

Speech enhancement through voice activity detection using speech absence probability based on Teager energy

In this work, a novel voice activity detection （VAD） algorithm that uses speech absence probability （SAP） based on Teager energy （TE） was proposed for speech enhancement. The proposed method employs local SAP （LSAP） based on the TE of noisy speech as a feature parameter for voice activity detection （VAD） in each frequency subband, rather than conventional LSAP. Results show that the TE operator can enhance the abiTity to discriminate speech and noise and further suppress noise components. Therefore, TE-based LSAP provides a better representation of LSAP, resulting in improved VAD for estimating noise power in a speech enhancement algorithm. In addition, the presented method utilizes TE-based global SAP （GSAP） derived in each frame as the weighting parameter for modifying the adopted TE operator and improving its performance. The proposed algorithm was evaluated by objective and subjective quality tests under various environments, and was shown to produce better results than the conventional method.

Kernel fuzzy c-means clustering on energy detection based cooperative spectrum sensing

Cooperation in spectral sensing （SS） offers a fast and reliable detection of primary user （PU） transmission over a frequency spectrum at the expense of increased energy consumption. Since the fusion center （FC） has to handle a large set of data, a duster based approach, specifically fuzzy c-means clustering （FCM）, has been extensively used in energy detection based cooperative spectrum sensing （CSS）. However, the performance of FCM degrades at low signal-to-noise ratios （SNR） and in the presence of multiple PUs as energy data patterns at the FC are often found to be non-spherical i.e. overlapping. To address the problem, this work explores the scope of kernel fuzzy c-means （KFCM） on energy detection based CSS through the projection of non-linear input data to a high dimensional feature space. Extensive simulation results are shown to highlight the improved detection of multiple PUs at low SNR with low energy consumption. An improvement in the detection probability by ～6.78% and ～6.96% at -15 dBW and -20 dBW, respectively, is achieved over the existing FCM method.

A Diffusion-Based Distributed Collaborative Energy Detection Algorithm for Spectrum Sensing in Cognitive Radio

Spectrum sensing is one of the most important steps in cognitive radio. In this paper, a new fully-distributed collaborative energy detection algorithm based on diffusion cooperation scheme and consensus filtering theory is proposed, which doesn’t need the center node to fuse the detection results of all users. The secondary users only exchange information with their neighbors to obtain the detection data, and then make the corresponding decisions independently according to the pre-defined threshold. Simulations show that the proposed algorithm is more superior to the existing centralized collaborative energy detection algorithm in terms of the detecting performance and robustness in the insecurity situation.

Adaptive Multi-scale Edge Detection Based on Region Energy

An adaptive multiscale edge detection method based on region energy analysis is presented here. Region energy distributions of both sides in different edge directions are studied. Based on the analysis and on the ratio between region energy threshold difference and region area, the adaptive multiscale edge detection rnethod is developed. The experiment result shows that the new method is effective, feasible and noise-resistant in image detection.

Speech Resampling Detection Based on Inconsistency of Band Energy

Speech resampling is a typical tempering behavior,which is often integrated into various speech forgeries,such as splicing,electronic disguising,quality faking and so on.By analyzing the principle of resampling,we found that,compared with natural speech,the inconsistency between the bandwidth of the resampled speech and its sampling ratio will be caused because the interpolation process in resampling is imperfect.Based on our observation,a new resampling detection algorithm based on the inconsistency of band energy is proposed.First,according to the sampling ratio of the suspected speech,a band-pass Butterworth filter is designed to filter out the residual signal.Then,the logarithmic ratio of band energy is calculated by the suspected speech and the filtered speech.Finally,with the logarithmic ratio,the resampled and original speech can be discriminated.The experimental results show that the proposed algorithm can effectively detect the resampling behavior under various conditions and is robust to MP3 compression.

Improved Blind Multiuser Detection Algorithm Based on Minimum Output Energy

Based on minimum output energy,an improved blind multiuser detection algorithm is proposed by the use of Hopfield neural network.Compared with traditional algorithms,the proposed algorithm does not need the circuit for constraints.The resources are greatly saved and the complexity is reduced as well.The simulation results show that the performance of the improved algorithm is similar to that of the optimal multiuser detection algorithm which is not suitable for the mobile station.Compared with the traditional gradient blind multiuser detection algorithm,the convergence speed of the improved algorithm is quickened.

Application of Dual-Energy X-Ray Image Detection of Dangerous Goods Based on YOLOv7

X-ray security equipment is currently a more commonly used dangerous goods detection tool, due to the increasing security work tasks, the use of target detection technology to assist security personnel to carry out work has become an inevitable trend. With the development of deep learning, object detection technology is becoming more and more mature, and object detection framework based on convolutional neural networks has been widely used in industrial, medical and military fields. In order to improve the efficiency of security staff, reduce the risk of dangerous goods missed detection. Based on the data collected in X-ray security equipment, this paper uses a method of inserting dangerous goods into an empty package to balance all kinds of dangerous goods data and expand the data set. The high-low energy images are combined using the high-low energy feature fusion method. Finally, the dangerous goods target detection technology based on the YOLOv7 model is used for model training. After the introduction of the above method, the detection accuracy is improved by 6% compared with the direct use of the original data set for detection, and the speed is 93FPS, which can meet the requirements of the online security system, greatly improve the work efficiency of security personnel, and eliminate the security risks caused by missed detection.

A Double Threshold Energy Detection-Based Neural Network for Cognitive Radio Networks

In cognitive radio networks(CoR),the performance of cooperative spectrum sensing is improved by reducing the overall error rate or maximizing the detection probability.Several optimization methods are usually used to optimize the number of user-chosen for cooperation and the threshold selection.However,these methods do not take into account the effect of sample size and its effect on improving CoR performance.In general,a large sample size results in more reliable detection,but takes longer sensing time and increases complexity.Thus,the locally sensed sample size is an optimization problem.Therefore,optimizing the local sample size for each cognitive user helps to improve CoR performance.In this study,two new methods are proposed to find the optimum sample size to achieve objective-based improved(single/double)threshold energy detection,these methods are the optimum sample size N^(*)and neural networks(NN)optimization.Through the evaluation,it was found that the proposed methods outperform the traditional sample size selection in terms of the total error rate,detection probability,and throughput.

An Intelligent Fuzzy Based Energy Detection Approach for Cooperative Spectrum Sensing

Cognitive radio systems are helpful to access the unused spectrum using the popular technique, referred to as spectrum sensing. Spectrum sensing involves the detection of primary user (PU) signal using dynamic spectrum access. Cooperative spectrum sensing takes advantage of the spatial diversity in multiple cognitive radio user networks to improve the sensing accuracy. Though the cooperative spectrum sensing schemes significantly improve the sensing accuracy, it requires the noise variance and channel state information which may lead to transmission overhead. To overcome the drawbacks in conventional cooperative spectrum sensing, this paper proposes a fuzzy system based cooperative spectrum sensing. Selection combining (SC) and maximum ratio combining (MRC) are used at fuzzy based fusion center to obtain the value of the sensing energy. These energy values are utilized in finding the presence of PU, results in improved sensing accuracy. In addition, an intelligent fuzzy fusion algorithm determines the PU presence without the channel state information based on multiple threshold values. Simulation results show that the proposed scheme outperforms the existing schemes in terms of sensing accuracy.

A mini review and hypothesis for coronavirus detection using photonics: surface enhanced Raman scattering and fluorescence resonance energy transfer

COVID-19 has devastated numerous nations around the world and has overburdened numerous healthcare systems,which has also caused the loss of livelihoods due to prolonged shutdowns and further led to a cascading effect on the global economy.COVID-19 infections have an incubation period of 2–7 days,but 40 to 45%of cases are asymptomatic or show mild to moderate respiratory symptoms after the period due to subclinical lung abnormalities,making it more likely to spread the pandemic disease.To restrict the spread of the virus,on-site diagnosis methods that are quicker,more precise,and easily accessible are required.Rapid Antigen Detection Tests and Polymerase Chain Reaction tests are currently the primary methods used to determine the presence of COVID-19 viruses.These tests are typically time-consuming,not accurate,and,more importantly,not available to everyone.Hence,in this review and hypothesis,we proposed equipment that employs the properties of photonics to improve the detection of COVID-19 viruses by taking the advantage of typical binding of coronavirus with angiotensin-converting enzyme 2(ACE2)receptors.This hypothetical model would combine Surface-Enhanced Raman Scattering(SERS)and Fluorescence Resonance Energy Transfer(FRET)to provide great flexibility,high sensitivities,and enhanced accessibility.

Adaptive double-threshold energy detection algorithm for cognitive radio

Due to the fact that the conventional spectrum sensing algorithm is susceptible to noise, an adaptive double-threshold energy detection algorithm for a cognitive radio is proposed. Based on double-threshold energy detection, the algorithm can adaptively switch between one-round sensing and two-round sensing by comparing the observations with the pre-fixed thresholds. Mathematical expressions for the probability of detection, the probability of false alarm, and the sensing time are derived. The relationships including signal to noise ratio （SNR） vs. the probability of detection and SNR vs. the sensing time are plotted using Monte Carlo simulation and the algorithm is verified in a real cognitive system based on GNU Radio and universal software radio peripheral （USRP）. Simulation and experimental results show that, compared with the existing spectrum sensing method, the proposed algorithm can achieve a higher probability of detection within a reasonable sensing time.

Wideband Signal Detection Based on MWC Discrete Compressed Sampling Structure

In order to solve the cross-channel signal problem caused by the uniform channelized wideband digital receiver when processing wideband signal and the problem that the sensitivity of the system greatly decreases when the bandwidth of wideband digital receiver increases,which both decrease the wideband radar signal detection performance,a new wideband digital receiver based on the modulated wideband converter(MWC)discrete compressed sampling structure and an energy detection method based on the new receiver are proposed.Firstly,the proposed receiver utilizes periodic pseudo-random sequences to mix wideband signals with baseband and other sub-bands.Then the mixed signals are low-pass filtered and downsampled to obtain the baseband compressed sampling data,which can increase the sensitivity of the system.Meanwhile,the cross-channel signal will all appear in any subbands,so the cross-channel signal problem can be solved easily by processing the baseband compressed sampling data.Secondly,we establish the signal detection model and formulate the criterion of the energy detection method.And we directly utilize the baseband compressed sampling data to carry out signal detection without signal reconstruction,which decreases the complexity of the algorithm and reduces the computational burden.Finally,simulation experiments demonstrate the effectiveness of the proposed receiver and show that the proposed signal detection method is effective in low signal-to-noise ratio(SNR)compared with the conventional energy detection and the probability of detection increases significantly when SNR increases.

Speech Endpoint Detection in Noisy Environments Using EMD and Teager Energy Operator

Accurate endpoint detection is a necessary capability for speech recognition. A new energy measure method based on the empirical mode decomposition （EMD） algorithm and Teager energy operator （TEO） is proposed to locate endpoint intervals of a speech signal embedded in noise. With the EMD, the noise signals can be decomposed into different numbers of sub-signals called intrinsic mode functions （IMFs）, which is a zero-mean AM-FM component. Then TEO can be used to extract the desired feature of the modulation energy for IMF components. In order to show the effectiveness of the proposed method, examples are presented to show that the new measure is more effective than traditional measures. The present experimental results show that the measure can be used to improve the performance of endpoint detection algorithms and the accuracy of this algorithm is quite satisfactory and acceptable.

A Lightweight Intrusion Detection System Using Convolutional Neural Network and Long Short-Term Memory in Fog Computing

The Internet of Things(IoT)links various devices to digital services and significantly improves the quality of our lives.However,as IoT connectivity is growing rapidly,so do the risks of network vulnerabilities and threats.Many interesting Intrusion Detection Systems(IDSs)are presented based on machine learning(ML)techniques to overcome this problem.Given the resource limitations of fog computing environments,a lightweight IDS is essential.This paper introduces a hybrid deep learning(DL)method that combines convolutional neural networks(CNN)and long short-term memory(LSTM)to build an energy-aware,anomaly-based IDS.We test this system on a recent dataset,focusing on reducing overhead while maintaining high accuracy and a low false alarm rate.We compare CICIoT2023,KDD-99 and NSL-KDD datasets to evaluate the performance of the proposed IDS model based on key metrics,including latency,energy consumption,false alarm rate and detection rate metrics.Our findings show an accuracy rate over 92%and a false alarm rate below 0.38%.These results demonstrate that our system provides strong security without excessive resource use.The practicality of deploying IDS with limited resources is demonstrated by the successful implementation of IDS functionality on a Raspberry Pi acting as a Fog node.The proposed lightweight model,with a maximum power consumption of 6.12 W,demonstrates its potential to operate effectively on energy-limited devices such as low-power fog nodes or edge devices.We prioritize energy efficiency whilemaintaining high accuracy,distinguishing our scheme fromexisting approaches.Extensive experiments demonstrate a significant reduction in false positives,ensuring accurate identification of genuine security threats while minimizing unnecessary alerts.