The energy transfer and cooperation upconversion processes are investigated in Yb3＋/Er3＋ codoped phos- phate glass. Based on the measured curves of output power versus incident power, the laser and spectroscopic par...The energy transfer and cooperation upconversion processes are investigated in Yb3＋/Er3＋ codoped phos- phate glass. Based on the measured curves of output power versus incident power, the laser and spectroscopic parameters of the glass are fitted and analyzed. We focus on the resonant energy transfer constant k from Yb3＋ to Er3＋ as well as the cooperation upconversion coefficient Cup from 4113/2 of Era＋. The fitted k and Cup can give almost the same results for different thicknesses of glass disk with the same dop- ing concentrations. The determination of these parameters is helpful for the development of Yb3＋/Er3＋ codoped laser glass.展开更多
Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound w...Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound which were well known as reaction products of cyanate esters and epoxy resins, compounds with hybrid ring structure of cyanurate/isocyanurate were determined. Gibbs free energies of the compound having hybrid ring structure of cyanurate/isocyanurate with two isocyanurate moiety were found to be lower than that of the compound with cyanurate ring structure through calculations. Calculation data supported the existence of hybrid ring structure of cy-anurate/isocyanurate. It was revealed that isomerization from cyanurate to isocyanurate occurs via hybrid ring structure of cyanurate/isocyanurate in the reaction of aryl cyanurate and epoxy.展开更多
Determination of the energy range is an important precondition of focus calibration using alignment procedure （FOCAL） test. A new method to determine the energy range of FOCAL off-lined is presented in this paper. I...Determination of the energy range is an important precondition of focus calibration using alignment procedure （FOCAL） test. A new method to determine the energy range of FOCAL off-lined is presented in this paper. Independent of the lithographic tool, the method is time-saving and effective. The influences of some process factors, e.g. resist thickness, post exposure bake （PEB） temperature, PEB time and development time, on the energy range of FOCAL are analyzed.展开更多
The singlet-singlet intramolecular energy transfer between naphthalene moiety and dansyl group held apart by a rigid steroid bridge was investigated for two molecules:3β-(1-naphthyl)acetoxy- 17α-dansyl-△~5androsten...The singlet-singlet intramolecular energy transfer between naphthalene moiety and dansyl group held apart by a rigid steroid bridge was investigated for two molecules:3β-(1-naphthyl)acetoxy- 17α-dansyl-△~5androstene(3a)and 3β-(1-naphthyl)acetoxy-17β-dansyl-△~5androstene(3b).The rates of energy transfer for 3a and 3b in cyclohexane are 6.9×10~6 and 1.1×10~8s^(-1) respectively.The difference in energy transfer rate between 3a and 3b is attributed to the different donor-acceptor separation and orientation.The ratio of the two epimers in the synthesized product mixture was obtained from the fluorescence decay measurements.展开更多
基金supported by the International Cooperation Project of Shanghai Municipal Science and Technology Commission under Grant No.05S207103.
文摘The energy transfer and cooperation upconversion processes are investigated in Yb3＋/Er3＋ codoped phos- phate glass. Based on the measured curves of output power versus incident power, the laser and spectroscopic parameters of the glass are fitted and analyzed. We focus on the resonant energy transfer constant k from Yb3＋ to Er3＋ as well as the cooperation upconversion coefficient Cup from 4113/2 of Era＋. The fitted k and Cup can give almost the same results for different thicknesses of glass disk with the same dop- ing concentrations. The determination of these parameters is helpful for the development of Yb3＋/Er3＋ codoped laser glass.
文摘Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound which were well known as reaction products of cyanate esters and epoxy resins, compounds with hybrid ring structure of cyanurate/isocyanurate were determined. Gibbs free energies of the compound having hybrid ring structure of cyanurate/isocyanurate with two isocyanurate moiety were found to be lower than that of the compound with cyanurate ring structure through calculations. Calculation data supported the existence of hybrid ring structure of cy-anurate/isocyanurate. It was revealed that isomerization from cyanurate to isocyanurate occurs via hybrid ring structure of cyanurate/isocyanurate in the reaction of aryl cyanurate and epoxy.
文摘Determination of the energy range is an important precondition of focus calibration using alignment procedure （FOCAL） test. A new method to determine the energy range of FOCAL off-lined is presented in this paper. Independent of the lithographic tool, the method is time-saving and effective. The influences of some process factors, e.g. resist thickness, post exposure bake （PEB） temperature, PEB time and development time, on the energy range of FOCAL are analyzed.
文摘The singlet-singlet intramolecular energy transfer between naphthalene moiety and dansyl group held apart by a rigid steroid bridge was investigated for two molecules:3β-(1-naphthyl)acetoxy- 17α-dansyl-△~5androstene(3a)and 3β-(1-naphthyl)acetoxy-17β-dansyl-△~5androstene(3b).The rates of energy transfer for 3a and 3b in cyclohexane are 6.9×10~6 and 1.1×10~8s^(-1) respectively.The difference in energy transfer rate between 3a and 3b is attributed to the different donor-acceptor separation and orientation.The ratio of the two epimers in the synthesized product mixture was obtained from the fluorescence decay measurements.
