Relationship between energy dissipation rate and channel morphology in the development of the model braided channel

A certain pattern of channel is the product of its self-adjustment under given boundary, discharge and sediment conditions. Based upon the principle of process-response model, an experimental study with 18 runs is carried out in LESRC. This paper is focused on the variation of the energy dissipation versus the channel morphology during and after the bedmaking process of braided channel. The results show that there exists a good empirical relationship between the energy dissipation rate and channel morphology. According to this relationship and the theory of minimum rate of energy dissipation, the authors explain the metamorphosis of the model channel with the development of the braided river.

Estimation of Turbulent Kinetic Energy Dissipation Rate in the Bottom Boundary Layer of the Pearl River Estuary

A structure function approach is applied to estimate the turbulent kinetic energy （TKE） dissipation rate in the bottom boundary layer of the Pearl River Estuary （PRE）. Simultaneous measurements with an acoustic Doppler velocimeter （ADV） supplied independent data for the verification of the structure function method. The results show that, 1） the structure function approach is reliable and successfully applied method to estimate the TKE dissipation rate. The observed dissipation rates range between 8.3 ×10^-4 W/kg and 4.9× 10^-6 W/kg in YM01 and between 3.4×10^-4 W/kg and 4.8×10^-7 W/kg in YM03, respectively, while exhibiting a strong quarter-diurnal variation. 2） The balance between the shear production and viscous dissipation is better achieved in the straight river. This first-order balance is significantly broken in the estuary by non-shear production/dissipation due to wave-induced fluctuations.

Unit stream power,minimum energy dissipation rate,and river engineering

Unit stream power is the most important and dominant parameter for the determination of transport rate of sand,gravel,and hyper-concentrated sediment with wash load.Minimum energy dissipation rate theory,or its simplified minimum unit stream power and minimum stream power theories,can provide engineers the needed theoretical basis for river morphology and river engineering studies.The Generalized Sediment Transport model for Alluvial River Simulation computer mode series have been developed based on the above theories.The computer model series have been successfully applied in many countries.Examples will be used to illustrate the applications of the computer models to solving a wide range of river morphology and river engineering problems.

Research on the energy evolution characteristics and the failure intensity of rocks

It is pretty challenging and difficult to quantitatively evaluate the intensity of dynamic disasters in deep mining engineering.Based on the uniaxial loading-unloading experiments for five types of rocks,this paper investigated the energy evolution characteristics,and identified the damage and crack propagation thresholds.Also,the fragment size distributions of the rocks after failure were analyzed.The energy release rate(Ge)and energy dissipation rate(Gd)were then proposed to describe the change of energies per unit volume and per unit strain.Results demonstrated that the more brittle rocks had the shorter stage of unstable crack growth and the lower induced damage at crack damage thresholds.The evolution characteristics of the strain energy rates can be easily identified by the crack propagation thresholds.The failure intensity index(FId),which equals to the values of Ge/Gd at the failure point,was further put forth.It can account for the brittleness of the rocks,the intensity of rock failure as well as the degree of rock fragmentation.It was revealed that a higher FId corresponded to a lower fractal dimension and stronger dynamic failure.

Particle Image Velocimetry Study of Turbulence Characteristics in a Vessel Agitated by a Dual Rushton Impeller

Particle Image Velocimetry （PIV） has been used to investigate turbulence characteristics in a 0.48 m diameter stirred vessel filled to a liquid height （ H = 1.4T ） of 0.67 m. The agitator had dual Rushton impellers of 0.19 m diameter （ D = 0.4T ）. The developed flow patterns depend on the clearance of the lower impeller above the base of the vessel, the spacing between the two impellers, and the submergence of the upper impeller below the liq- uid surface. Their combinations can generate three basic flow patterns, named, parallel, merging and diverging flows. The results of velocity measurement show that the flow characteristics in the impeller jet flow region changes very little for different positions. Average velocity, trailing vortices and shear strain rate distributions for three flow patterns were measured by using PIV technique. The characteristics of trailing vortex and its trajectory were described in detail for those three flow patterns. Since the space-resolution of PIV can only reach the sub-grid rather than the Kolmogorov scale, a large-eddy PIV analysis has been used to estimate the distribution of the turbulent kinetic energy dissipation. Comparison of the distributions of turbulent kinetic energy and dissipation rate in merging flow shows that the highest turbulent kinetic energy and dissipation are both located in the vortex regions, but the maxima are at somewhat different lo- cations behind the blade. About 37% of the total energy is dissipated in dual impeller jet flow regions. The obtained distribution of shear strain rate for merging flow is similar to that of turbulence dissipation, with the shear strain rate around the trailing vortices much higher than in other areas.

Turbulent Characteristic of Liquid Around a Chain of Bubbles in Non-Newtonian Fluid

The turbulence behavior of gas-liquid two-phase flow plays an important role in heat transfer and mass transfer in many chemical processes. In this work, a 2D particle image velocimetry (PIV) was used to investigate the turbulent characteristic of fluid induced by a chain of bubbles rising in Newtonian and non-Newtonian fluids. The instantaneous flow field, turbulent kinetic energy (TKE) and TKE dissipation rate were measured. The results demonstrated that the TKE profiles were almost symmetrical along the column center and showed higher values in the central region of the column. The TKE was enhanced with the increase of gas flow and decrease of liquid viscosity. The maximum TKE dissipation rate appeared on both sides of the bubble chain, and increased with the increase of gas flow rate or liquid viscosity. These results provide an understanding for gas-liquid mass transfer in non-Newtonian fluids.

Robust Solution for Boundary Layer Height Detections with Coherent Doppler Wind Lidar

Although coherent Doppler wind lidar(CDWL)is promising in detecting boundary layer height(BLH),differences between BLH results are observed when different CDWL measurements are used as tracers.Here,a robust solution for BLH detections with CDWL is proposed and demonstrated:mixed layer height(MLH)is retrieved best from turbulent kinetic energy dissipation rate(TKEDR),while stable boundary layer height(SBLH)and residual layer height(RLH)can be retrieved from carrier-to-noise ratio(CNR).To study the cause of the BLH differences,an intercomparison experiment is designed with two identical CDWLs,where only one is equipped with a stability control subsystem.During the experiment,it is found that the CNR could be distorted by instrument instability because the coupling efficiency from free-space to the polarization-maintaining fiber of the telescope is sensitive to the surrounding environment.In the ML,a bias up to 2.13 km of the MLH from CNR is found,which is caused by the CNR deviation.In contrast,the MLH from TKEDR is robust as long as the accuracy of wind is guaranteed.In the SBL(RL),the CNR is found capable to retrieve SBLH and RLH simultaneously and robustly.This solution is tested during an observation period over one month.Statistical analysis shows that the root-mean-square errors(RMSE)in the MLH,SBLH,and RLH are 0.28 km,0.23 km,and 0.24 km,respectively.

Study on Hydrography and Small-Scale Process over Zhoushan Sea Area

This paper mainly analyzes the tidal characteristics and small-scale mixing process near Zhoushan Islands. First, the spectral analysis and wavelet analysis are adopted for the measured tide level data and tidal current data from the Zhoushan sea area, which indicate that the main tidal cycle near Hulu Island and Taohua Island is semi-diurnal cycle, the diurnal cycle is subordinate. Both their intensities are changed periodically, meanwhile, the diurnal tide becomes stronger when semi-diurnal tide becomes weak. The intensity of baroclinie tidal current weakens at first and then strengthens from top to bottom. Then, in this paper, the Gregg-Henyey （G-H） parameterization method is adopted to calculate the turbulent kinetic energy dissipation rate based on the measured temperature and tidal current data. The results of which shown that the turbulent kinetic energy dissipation rate around Hulu Island is higher than that around Taohua Island. In most cases, the turbulent kinetic energy dissipation rate during spring tide is larger than that during the neap tide; the turbulent kinetic energy dissipation rate in the surface layer and the bottom layer are higher than that in the intermediate water; the changes of turbulent kinetic energy dissipation rate and tidal current are basically synchronous The modeled turbulent kinetic energy dissipation rate gets smaller with the increase of the stratification, however, gets larger with the increase of shearing.

ANALYSES OF TURBULENT MODELS WITH EXTREMUM LAW OF ENERGY DISSIPATION RATE

By introducing the extremum law of energy dissipation rate into the investigation of turbulent flow,the closure problem for the basic equations is briefly discussed in connection with a newly suggested semi-empirical turbulent flow model.As a result,several unknown functions which cannot be solved by the existed semi-empirical models are obtained in the present paper.It is shown that the turbulent flow models,as the constraints to the extremum problem, have direct influence on the final results of the primary parameters.

Sediment Transport in Rivers and Coastal Waters

Following Bagnold's approach, a relationship between sediment transport and energy dissipation is developed. The major assumption made in the study is that the near bed velocity plays a dominant role in the process of sediment transport. A general relationship between energy dissipation and sediment transport is first proposed. Then the equations for total sediment transport are derived by introducing the appropriate expression of energy dissipation rate under different conditions, such as open channel flows, combination of wave and current, as well as longshore sediment transport. Within the flows investigated, the derived relationships are fairly consistent with the available data over a wide range of conditions.

On two distinct Reynolds number regimes of a turbulent square jet

The effects of Reynolds number on both large-scale and small-scale turbulence properties are investigated in a square jet issuing from a square pipe. The detailed velocity fields were measured at five different exit Reynolds numbers of 8 × 10^3 〈 Re 〈 5 × 10^4. It is found that both large-scale properties （e.g,, rates of mean velocity decay and spread） and small-scale properties （e.g., the dimensionless dissipation rate constant A = εL/（u^2）^3/2） are dependent on Re for Re ≤ 3 ×10^4 or Reλ ≤ 190, but virtually become Re-independent with increasing Re or Reλ. In addition, for Reλ 〉 190, the value ofA = εL/（u^2）^3/2 in the present square jet converges to 0.5, which is consistent with the observation in direct numerical simulations of box turbulence, but lower than that in circular jet, plate wake flows, and grid turbulence. The discrepancies in critical Reynolds number and A = εL/（u^2）^3/2 among different turbulent flows most likely result from the flow type and initial conditions.

Energy dissipation caused by boundary resistance in a typical reach of the lower Yellow River and the implications for riverbed stability

The energy dissipation of boundary resistance is presented in this paper based on the flow resistance.Additionally,the river morphology responses to the resistance energy dissipation are explored using the Gaocun-Taochengpu reach in the lower Yellow River as a prototype.Theoretical analysis,measured data analysis and a one-dimensional hydrodynamic model are synthetically used to calculate the energy dissipation rate and riverbed morphological change.The results show that the energy dissipation rate along the channel will increase in both the mean value and the fluctuation intensity with increasing discharge.However,the energy dissipation rate will first decrease and then increase as the flow section or width-depth ratio increases.In addition,the energy dissipation rate has a significant positive correlation with the riverbed stability index.The results imply that the water and sediment transport efficiency of the river channel can be improved by optimizing the cross-sectional configuration to fulfil the minimum energy dissipation rate of the boundary resistance under stable riverbed conditions.

Turbulence and mixing in a freshwater-influenced tidal bay: Observations and numerical modeling

In situ observations and numerical simulations of turbulence are essential to understanding vertical mixing processes and their dynamical controls on both physical and biogeochemical processes in coastal embayments. Using in situ data collected by bottom-mounted acoustic Doppler current profilers(ADCPs) and a free-falling microstructure profiler, as well as numerical simulations with a second-moment turbulence closure model, we studied turbulence and mixing in the Xiamen Bay, a freshwater-influenced tidal bay located at the west coast of the Taiwan Strait. Dynamically, the bay is driven predominantly by the M2 tide, and it is under a significant influence of the freshwater discharged from the Jiulong River. It is found that turbulence quantities such as the production and dissipation rates of the turbulent kinetic energy(TKE) were all subject to significant tidal variations, with a pronounced ebb-flood asymmetry. Turbulence was stronger during flood than ebb. During the flooding period, the whole water column was nearly well mixed with the depth-averaged TKE production rate and vertical eddy viscosity being up to 5?10?6 W kg?1 and 2?10?2 m2 s?1, respectively. In contrast, during the ebb strong turbulence was confined only to a 5?8 m thick bottom boundary layer, where turbulence intensity generally decreases with distance from the seafloor. Diagnosis of the potential energy anomaly showed that the ebb-flood asymmetry in turbulent dissipation and mixing was due mainly to tidal straining process as a result of the interaction between vertically shared tidal currents and horizontal density gradients. The role of vertical mixing in generating the asymmetry was secondary. A direct comparison of the modeled and observed turbulence quantities confirmed the applicability of the second-moment turbulence closure scheme in modeling turbulent processes in this weakly stratified tidally energetic environment, but also pointed out the necessity of further refinements of the model.

EXPERIMENTAL AND THEORETICAL INVESTIGATION OF THE FIRST FOLD CREATION IN THIN WALLED COLUMNS

In this paper, a theoretical formula is presented to predict the instantaneous folding force of the first fold creation in square and rectangular columns under axial loading.The rectangular column is a small and single model of honeycombs with square or rectangular cells.Calculations are based on the analysis of the Basic Folding Mechanism （BFM）.For this purpose, sum of the dissipated energy rate under bending around horizontal and inclined hinge lines and the dissipated energy rate under extensional deformations was equal to the work rate of the external force on the structure.The final formula obtained in this research, reasonably predicts the instantaneous folding force of single-cell square and rectangular honeycombs instead of the average value.Finally, according to the calculated theoretical relation, the instantaneous folding force of the first fold creation in a square column was sketched versus folding distance and compared to the experimental results, which showed a good correlation.