Invited Paper: Antenna Selection in Energy Efficient MIMO Systems: A Survey

With the explosive growth and need for high-speed wireless communications, more and more energy is consumed to support the required quality of service. Therefore, energy efficient or green communication has become a very hot topic under the ground of limited energy resource and environmentally friendly transmission schemes. MIMO technique is capable of reducing the transmission power thanks to its diversity and multiplexing gain. Moreover, antenna selection(AS) is an alternative to extract many of the benefits in MIMO systems with a reduced cost of complexity and power. Although many works including several survey papers have investigated AS in MIMO systems, the goal of these works is only the capacity maximization or error rate minimization, which fails to guarantee the optimality of the energy efficiency in MIMO systems. In this paper, we overview the state of the art in the AS schemes in energy efficient MIMO systems, the goal of which is to optimize the energy efficiency of the whole system. Specifically, we introduce energy efficient AS in point-to-point MIMO, cooperative MIMO, multiuser MIMO and largescale MIMO systems, respectively. Several challenging and practical issues in this area are also addressed.

Mathematical model of absorption and hybrid heat pump

Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly because use working fluids that do not cause ozone depletion and can reduce the global warming emissions.The hybrid heat pump processes combine the conventional vapor-compression and the absorption heat pump cycles.Studies about the simulations and modeling of hybrid heat pumps are few in literature.In this research a mathematical model for single effect absorption and hybrid heat pump is carried out with Chem Cad? 6.0.1.LiBr–H_2O is used as working fluid while electrolytic NRTL and electrolytes latent heat are used as thermodynamic model due to the better results.Binary parameters of activity coef ficients are regressed from experimental vapor pressure data while default constants are used for the solubility expressions.A design of heat pumps is developed and a new modeling of generator is analyzed.The coef ficient of performance of absorption heat pump and hybrid heat pump is equal to 0.7 and 0.83 respectively.For absorption heat pump a sensitivity analysis is carried out to evaluate the effect of temperature and pressure generator,the concentration of Li–Br solution on coef ficient of performance,cooling capacity and working fluid temperature.For hybrid heat pump,the different coef ficients of performance,the primary energy ratio,the generator heat,and the compressor power are analyzed for different values of compressor proportion.Results show that comparing the two systems the hybrid pump allows to save more primary energy,costs and carbon dioxide emissions with respect to absorption heat pump with the increasing of compressor proportion parameter.Future researches should focus on the construction of this heat pumps integrated in chemical processes as a biogas plant or trigeneration systems.

Simulating dispatchable grid services provided by flexible building loads:State of the art and needed building energy modeling improvements

End-use electrical loads in residential and commercial buildings are evolving into flexible and cost-effective resources to improve electric grid reliability,reduce costs,and support increased hosting of distributed renewable generation.This article reviews the simulation of utility services delivered by buildings for the purpose of electric grid operational modeling.We consider services delivered to(1)the high-voitage bulk power system through the coordinated action of many,distributed building loads working together,and(2)targeted support provided to the operation of low-voltage electric distribution grids.Although an exhaustive exploration is not possible,we emphasize the ancillary services and voltage management buildings can provide and summarize the gaps in our ability to simulate them with traditional building energy modeling(BEM)tools,suggesting pathways for future research and development.

An Analysis of Energy and Environment Efficiency of China＇s Iron and Steel Industry

Due to heavy energy consumption and low technical efficiency, China＇s iron and steel industry is trapped in the dilemma ＂large but not strong＂. This situation not only exerts enormous pressure on energy security but also on increased carbon emission and environmental pollution. The contribution of this study is to calculate the energy and environment efficiency of China＇s iron and steel industry and to analyze the factors affecting this efficiency. An index of energy and environment efficiency is introduced based on Directional Slacks-based Distance Measure Model. This index is adopted to measure the energy and environment efficiency of China＇s iron and steel industry using 2,382 firm observations during 2001 to 2005. In addition, Hierarchy Linear Model （HLM） is applied to analyze the factors which can influence the efficiency with both firm-level and province-level data. The conclusions are as follows： The energy and environment efficiency of China＇s iron and steel industry did not have a significant change during the research period. A firm＇s age, size, ownership, product category and the economy of its province have significant influence on its energy and environment efficiency.