Research on Leak Location Method of Water Supply Pipeline Based on MVMD

At present,the leakage rate of the water distribution network in China is still high,and the waste of water resources caused by water distribution network leakage is quite serious every year.Therefore,the location of pipeline leakage is of great significance for saving water resources and reducing economic losses.Acoustic emission technology is the most widely used pipeline leak location technology.The traditional non-stationary random signal de-noising method mainly relies on the estimation of noise parameters,ignoring periodic noise and components unrelated to pipeline leakage.Aiming at the above problems,this paper proposes a leak location method for water supply pipelines based on a multivariate variational mode decomposition algorithm.This method combines the two parameters of the energy loss coefficient and the correlation coefficient between adjacent modes,and adaptively determines the decomposition mode number K according to the characteristics of the signal itself.According to the correlation coefficient,the effective component is selected to reconstruct the signal and the cross-correlation time delay is estimated to determine the location of the pipeline leakage point.The experimental results show that this method has higher accuracy than the cross-correlation method based on VMD and the cross-correlation method based on EMD,and the average relative positioning error is less than 2.2%.

Comparison on Hydraulic Characteristics Between Orifice Plate and Plug

Orifice plate energy dissipater as well as plug energy dissipater, as a kind of effective energy dissipater with characteristics of simple structure, convenient construction and high energy dissipation ratio, has become welcomed more and more by hydraulics researchers. The two kinds of energy dissipaters with sudden reduction and sudden enlargement forms are similar in energy dissipation mechanism, but there are differences in energy dissipation characteristics and cavitation characteristics. In the present paper, the differences between orifice plate and plug in energy loss coefficient, relating to their energy dissipation ratio, in the backflow region length, relating to their energy loss coefficient, and in the lowest wall pressure coefficient, relating to their cavitations risk, were analyzed by numerical simulations and physical experiment, and their features in above three aspects were also revealed. The results of research in the present paper demonstrate that the backflow region length of orifice plate is longer than that of plug at the same contraction ratio, the lowest wall pressure coefficient of plug is smaller than that of orifice plate at the same contraction ratio, and the energy loss coefficient of orifice plate is bigger than that of plug, which illustrates that plug is superior to orifice plate in resistance cavitation damage at the same contraction ratio.