China's Global Energy Strategy: from Energy Strength to Energy Power

Since the founding of the People's Republic of China in 1949, China's global energy strategy has experienced three stages: "infancy", "growth" and "maturity". Chinese foreign energy cooperation has also gone through three periods chronologically, which include(1) the period when China got rid of its high dependence on oil imports from the Soviet Union, achieved self-reliance and even became a net exporter;(2) the period when China first focused on "bringing in" and then turned itself into a net importer of crude oil and refined oil; and(3) the period when China "went global" to engage in energy cooperation in diverse areas, gradually shifting into a leading role before launching the Belt and Road Initiative, which marked the full establishment of the Chinese global energy strategy. The objective of the Chinese global energy strategy has gradually changed from merely pursuing "energy strength" to transforming "energy strength" into "energy power"; the mission is mainly to "promote energy cooperation and energy revolution"; to implement this mission, China will provide international public goods to global and regional energy governance through energy diplomacy and services; and the areas covered by the strategy are countries and regions along the "Silk Road Economic Belt".

Improved Breakdown Strength in(Ba_(0.6)Sr_(0.4))_(0.85)Bi_(0.1)TiO_3 Ceramics with Addition of CaZrO_3 for Energy Storage Application

（Ba（0.6） Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics doped with x wt%CaZrO3（x= 0-10） were synthesized by solid-state reaction method. The effects of CaZrO3 amount on the dielectric properties and structure of（Ba（0.6）Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics were investigated. X-ray diffraction results indicated a pure cubic perovskite structure for all samples and that the lattice parameter increased till x=5 and then slightly decreased. A homogenous microstructure was observed with the addition of CaZrO3. Dielectric measurements revealed a relaxor-like characteristic for all samples and that the diffusivity γ reached the maximum value of 1.78 at x=5. With the addition of CaZrO3, the dielectric constant dependence on electric field was weakened, insulation resistivity enhanced and dielectric breakdown strength improved obviously and reached 19.9 k V/mm at x=7.5. In virtue of low dielectric loss（tan d〈0.001 5）, moderate dielectric constant（er 〉1 500） and high breakdown strength（Eb 〉17.5 k V/mm）, the CaZrO3 doped（Ba（0.6）Sr（0.4））0.85 Bi（0.1） TiO3 ceramic is a potential candidate material for high power electric applications.

The temperature-dependent fracture strength model for ultra-high temperature ceramics

Breaking down the entire structure of a material implies severing all the bonds between its atoms either by applying work or by heat transfer. Because bond-breaking is indifferent to either means, there is a kind of equivalence between heat energy and strain energy. Based on this equivalence, we assume the existence of a constant maximum storage of energy that includes both the strain energy and the corresponding equivalent heat energy. A temperaturedependent fracture strength model is then developed for ultrahigh temperature ceramics （UHTCs）. Model predictions for UHTCs, HfB2, TiC and ZrB2, are presented and compared with the experimental results. These predictions are found to be largely consistent with experimental results.

Analysis of complete plasticity assumption for solid circular shaft under pure torsion and calculation of shear stress

The distribution of shear stress on the cross-section of plastic metal solid circular shaft under pure torsion yielding, the applicability of complete plastic model assumption and the shear stress formula were researched. Based on the shear stress formula of circular shaft under pure torsion in elastic stage, the formula of torque in elastic stage and the definition of yield, it is obtained that the yielding stage of plastic metal shaft under pure torsion is only a surface phenomenon of torque-torsion angle relationship, and the distribution of shear stress is essentially different from that of tensile stress when yielding under uniaxial tension. The pure torsion platform-torsion angle and the shape of torque-torsion angle curve cannot change the distribution of shear stress on the shaft cross-section. The distribution of shear stress is still linear with the maximum shear stress ts. The complete plasticity model assumption is not in accordance with the actual situation of shaft under torsion. The experimental strength data of nine plastic metals are consistent with the calculated results of the new limiting strain energy strength theory （LSEST）. The traditional yield stress formula for plastic shaft under torsion is reasonable. The shear stress formula based on the plane assumption in material mechanics is applicable for all loaded stages of torsion shaft.

Spatial relationship between energy dissipation and vortex tubes in channel flow

The spatial relationship between the energy dissipation slabs and the vortex tubes is investigated based on the direct numerical simulation（DNS） of the channel flow. The spatial distance between these two structures is found to be slightly greater than the vortex radius. Comparison of the core areas of the vortex tubes and the dissipation slabs gives a mean ratio of 0.16 for the mean swirling strength and that of 2.89 for the mean dissipation rate. These results verify that in the channel flow the slabs of intense dissipation and the vortex tubes do not coincide in space. Rather they appear in pairs offset with a mean separation of approximately 10η.

Dielectric phenomena and electrical energy storage of poly(vinylidene fluoride) based high-k polymers

Polymeric dielectrics have wide range of applications in the field of electrical energy storage because of their light weight and easy processing. However, the state-of-the-art polymer dielectrics, such as biaxially orientated polypropylene, could not meet the demand of minimization of electronic devices because of its low energy density. Recently, poly（vinylidene fluoride） （PVDF） based ferroelectric polymers have attracted considerable interests for energy storage applications because of their high permittivity and high breakdown strength. Unfortunately, the high dielectric loss and/or high remnant polarization of PVDF-based polymers seriously limits their practical applications for electrical energy storage. Since the discovery of relaxor ferroelectric behavior was firstly reported in irradiated poly（vinylidene fluoride- trifluoroethylene） （P（VDF-TrFE）） copolyrner, many strategies have been developed to enhanced the electrical energy storage capability, including copolymerization, grafting, blending and fabricating of multilayer How these methods affect the polymorphs, crystallinity, crystal size of PVDF-based polymers and the connection between these microstructures and their corresponding energy storage properties are discussed in detail.

Influence of Features of Interphase Boundaries on Mechanical Properties and Fracture Pattern in Metal-Ceramic Composites

The results of a theoretical study on the influence of strength of interphase boundaries in metal-ceramic composite on macroscopical characteristics of composite response such as strength, deformation capacity, fracture energy and fracture pattern are presented. The study was conducted by means of computer-aided simulation by means of movable cellular automaton method taking account of a developed ＂mesoscopical＂ structural model of particle-reinforced composite. The strength of interphase boundaries is found to be a key structural factor determining not only the strength properties of metal-ceramic composite, but also the pattern and rate of fracture. The principles for achievement of the high-strength values of particle/binder interfaces in the metal-ceramic composition due to the formation of the wide transition zones （areas of variable chemical composition） at the interphase boundaries are discussed. Simulation results confirm that such transition zones provide a change in fracture mechanism and make the achievement of a high-strength and a high deformation capacity of metal-ceramic composite possible.