Sedimentary build-ups of pre-salt isolated carbonate platforms and formation of deep-water giant oil fields in Santos Basin,Brazil

In response to the problems of unclear distribution of deep-water pre-salt carbonate reservoirs and formation conditions of large oil fields in the Santos passive continental margin basin,based on comprehensive utilization of geological,seismic,and core data,and reconstruction of Early Cretaceous prototype basin and lithofacies paleogeography,it is proposed for the first time that the construction of pre-salt carbonate build-ups was controlled by two types of isolated platforms:inter-depression fault-uplift and intra-depression fault-high.The inter-depression fault-uplift isolated platforms are distributed on the present-day pre-salt uplifted zones between depressions,and are built on half-and fault-horst blocks that were inherited and developed in the early intra-continental and inter-continental rift stages.The late intra-continental rift coquinas of the ITP Formation and the early inter-continental rift microbial limestones of the BVE Formation are continuously constructed;intra-depression fault-high isolated platforms are distributed in the current pre-salt depression zones,built on the uplifted zones formed by volcanic rock build-ups in the early prototype stage of intra-continental rifts,and only the BVE microbial limestones are developed.Both types of limestones formed into mound-shoal bodies,that have the characteristics of large reservoir thickness and good physical properties.Based on the dissection of large pre-salt oil fields discovered in the Santos Basin,it has been found that both types of platforms could form large-scale combined structural-stratigraphic traps,surrounded by high-quality lacustrine and lagoon source rocks at the periphery,and efficiently sealed by thick high-quality evaporite rocks above,forming the optimal combination of source,reservoir and cap in the form of“lower generation,middle storage,and upper cap”,with a high degree of oil and gas enrichment.It has been found that the large oil fields are all bottom water massive oil fields with a unified pressure system,and they are all filled to the spill-point.The future exploration is recommended to focus on the inter-depression fault-uplift isolated platforms in the western uplift zone and the southern section of eastern uplift zones,as well as intra-depression fault-high isolated platforms in the central depression zone.The result not only provides an important basis for the advanced selection of potential play fairways,bidding of new blocks,and deployment of awarded exploration blocks in the Santos Basin,but also provides a reference for the global selection of deep-water exploration blocks in passive continental margin basins.

Kinetic Performance of Oil-field Produced Water Treatment by Biological Aerated Filter

The biological aerated filter （BAF） was used to treat the oil-field produced water. The removal efficiency for oil, COD, BOD and suspended solids （SS） was 76.3%-80.3%, 31.6%-57.9%, 8.6.3%-96.3% and76.4%--82.7%, respectively when the hydraulic loading rates varied from 016m·h^-1 to 1.4m·h^-1. The greatest partof removal, for example more than 80% of COD removal, occurred on the top 100cm of the media in BAF. The kinetic .performance of BAF indicated that the relationship of BOD removal efficiency with the hydraulic loadingrates, in biological aerated filters could be described by c1/c1=l-exp（-2.44/L^0.59）. This equation could be used topredict the B OD.removal efficiency at different hydraulic loading rates.

Cameroon Green Energy Potentials: Field Survey of Production, Physico-Chemical Analyses of Palm Kernel Oil for Industrial Applications

This paper reports a field survey undertaken to determine the availability of raw material for palm kernel oil commercial production for industrial applications. Both industrial and artisanal wastes from palm kernel oil production were also surveyed as raw material (palm kernel seeds) for green energy production. Results of the field study show that 22% of palm kernel seeds (which represents tons of waste) resulting from palm oil processing plants are dumped while at the artisanal level, 80% of palm kernel seed waste is dumped. Analysis of field study data shows that large amounts of waste palm kernel seeds are available to enable large scale production of palm kernel oil (PKO) for desirable industrial applications in green energy production. The paper also reports on the physical and chemical properties of Cameroon palm kernel oil (PKO). Palm kernel oil was extracted using mechanical press and solvent extraction. The palm kernel oil (PKO) from Cameroon was analyzed by standard physico-chemical methods. Results of the physical measurements show a specific gravity of PKO of 0.92 kg/L, viscosity of 26.03 cSt and at 5.93 cSt at 40°C and 100°C respectively, viscosity index of 185, pour point of 20°C, cloud point of 29°C, flash point of 200°C, aniline point of 105°F, diesel index of 23, cetane number of 27 and ASTM (American Standards for Testing and Materials) color of less than 2.5. Results of chemical analyses showed an acid value of 17.95 mg KOH/g, free fatty acid (FFA) content of 8.98 mg KOH/g, iodine value of 2.10 mg I2/g, peroxide value of 2.10 meq/kg, ester value of 123.0 mg KOH/g, hydroxyl value of 93.4 mg OH/g, saponification value of 140.95 mg KOH/g and a sulfur content of 0.016% w/v, signifying low sulfur content. Gas chromatography-mass spectrometry (GC-MS) showed the palm kernel oil to be predominantly made up of glycerides of various fatty acids with higher proportions of C12 to C16 fatty acid residues. Cameroon PKO therefore has a broad spectrum of industrial applications by virtue of its rich physical and chemical properties.

Water-cut rising mechanism and optimized water injection technology for deepwater turbidite sandstone oilfield: A case study of AKPO Oilfield in Niger Delta Basin, West Africa

Through the analysis of the reservoir connection relationship and the water-cut rising rules after water breakthrough in the highly volatile oil AKPO oilfield, a new model of water-cut rising was established, and the timing and strategy of water injection were put forward. The water-cut rising shapes of producers after water breakthrough can be divided into three types, and their water-cut rising mechanism is mainly controlled by reservoir connectivity. For the producers which directly connect with injectors in the single-phase sand body of the single-phase channel or lobe with good reservoir connectivity, the water-cut rising curve is "sub-convex". For the producers which connect with injectors through sand bodies developed in multi-phases with good inner sand connectivity but poorer physical property and connectivity at the overlapping parts of sands, the response to water injection is slow and the water-cut rising curve is "sub-concave". For the producers which connect with injectors through multi-phase sand bodies with reservoir physical properties, connectivity in between the former two and characteristics of both direct connection and overlapping connection, the response to water injection is slightly slower and the water-cut rising curve is "sub-S". Based on ratio relationship of oil and water relative permeability, a new model of water cut rising was established. Through the fitting analysis of actual production data, the optimal timing and corresponding technology for water injection after water breakthrough were put forward. Composite channel and lobe reservoirs can adopt water injection strategies concentrating on improving the vertical sweep efficiency and areal sweep efficiency respectively. This technology has worked well in the AKPO oilfield and can guide the development of similar oilfields.

Cleaning method of the oil field wastewater treatment by UF process

This article introduces experiments and researches of polysulphone ultrafiltration membrane's effect on oil field polluted water and approaches renewing oil field polluted water and approaches renewing of membrane's flux by different detergents and cleaning method. Good result has been achieved by doing experiments and the renewal rate of membrane is over 90%.

Development of High Viscous Oil in Sandstone Reserviors During the High Water Cut Stage，Gudao Oilfield

The oi!bearing area of Gudao Oilfield covers 80.9 square kilometers.with 373 million tons of oil in place.It is a large drape anticlinal.Neogene Gu-dao Formation is main oil-beraing reservoir devel-oped with dip gentle from 30'to 1°30'in general.The main oil-bearing sequences can be divided into 6 sand groups and 34 layers in detail.in which the Ng°-Ng°sand groups are the main payzones in which oil in place accounts for 97.2%of the total.

Optimization of the Algorithm for Increasing Injection Rate in Water Injection Wells for Pressure Optimization in P Oilfield

In today’s society, with the continuous growth of energy demand, Bohai Oilfield, as an important offshore oil resource base in China, is facing increasingly severe challenges while contributing to national energy security. In order to improve the quality of water injection in the oilfield and gradually achieve efficient and stable production, Bohai Oilfield has launched a water injection well pressure optimization project, focusing on improving the efficiency and quality of water injection in the water injection wells, in order to achieve the optimal water injection plan. In practical work, P Oilfield continues to promote the development of water injection well pressure optimization projects, emphasizing practical exploration and continuous optimization of work plans. However, during the project implementation process, there were some problems, one of which was that the statistics of cumulative injection volume were not scientific enough, resulting in a more comprehensive and accurate presentation of the actual results of pressure optimization work. In the context of continuous improvement work, after careful analysis and research, P Oilfield has decided to optimize the cumulative injection rate algorithm to guide the oilfield’s water injection work in a more refined way, ensuring sufficient and good water injection, and enhancing the oilfield’s production efficiency and comprehensive competitiveness.

Status quo and countermeasures of energy audit in oil and gas field enterprises

To develop energy audits in oil and gas field enterprises has important and realistic significance. Chinese energy audit in oil and gas field enterprises is still in the exploratory stage, the paper puts forward some countermeasures and proposals through the analysis on status quo to identify the shortcomings.

Dynamic Variation of Land-use Types of the Constructed Wetland before and after Oil-field Water Irrigation Based on 3S Technology

[Objective] The study aimed at analyzing the dynamic variation of land-use types of the constructed wetland before and after oil-field water irrigation based on 3S technology. [Method] At semi-arid and arid areas in the west of Jilin Province, water resource balance between the amount of oil-field water supply and ecological water requirement in the constructed wetland irrigated by oil-field water during 2001-2010 was investigated firstly. Afterwards, based on 3S technology, the partition and dynamic variation of land-use types of the constructed wetland before and after oil-field water irrigation in 2001, 2006, 2008 and 2010 were analyzed. [Result] The annual ecological water requirement of the constructed wetland from 2003 to 2010 varied from 1.62×106 to 2.24×106 m3, and the annual amount of oil-field water supply in the region changed from 2.12×106 to 2.84×106 m3, which showed that the supply amount of oil-field water could meet the basic ecological water requirement of the constructed wetland. Meanwhile, compared with 2001, the areas of water region and paddy field in 2010 increased by 2.3 and 10.0 times, and the areas of forest and marsh rose by 40.15% and 29.5.0% respectively. [Conclusion] Water shortage and ecological environment problem of arid and semi-arid areas had been improved by oil-field water irrigation.

Electrostatic Enhancement of Coalescence of Oil Droplets(in Nanometer Scale) in Water Emulsion

Oil droplets in nanometer scale which are dispersed in water cannot be separated easily. An attractive technique is carried out by electrical phenomena to demulsify oil in water emulsion. In this research, non-uniform electric field or dielectrophoresis （DEP） is applied to remove sunflower oil （which is dispersed in the water）. Effectsof temperature, time and voltage （using AC-electric field） were considered to get the highest DEP-force （Fdi） and the best results. The oil particles sizes with average of approximately 76 nm have been shown using a ZetaSizer Nano ZS, Model ZEN 1600 （Malvem Instrument Ltd.）. The maximum separation efficiency of 85% is obtained at the optimum temperature of 38 ℃ and voltage of 3000 V.

The Hot Water Oil Expulsion Technique for Geothermal Resources

With the rapid development of Chinese petroleum industry, Oil production way of burning crude oil to produce steam need change. Heavy oil reservoir with thin layer or edgewater is unsuitable thermal recovery, electric heating leads to considerable electrical consumption, low injection water temperature decreases reservoir temperature and increased crude oil viscosity. The prolonged temperature difference break up reservoir pore throat cement and framework minerals. To improve high-capacity channel communication, we proposed geothermal oil recovery. Broad-sense abundant geothermal resources and existing injection water technique equipment are used, deep-seated high temperature liquid (oil-gas-water mixture) draws geothermal warming flowing layer to transit heat upward, decreases viscidity and increases fluidity. Reservoir temperature different offer geothermal fountain. Practicability process is analyzed. statistics and reservoir temperature variation analysis of Gudong Oilfield, Shengli Oilfield Company, SINOPEC, we have designed flow-chart concept for geothermal oil recovery, suggested drilling multi-branch well in heavy oil reservoir as injection-well, at the same position of geothermal fountain well, using free-pressure pump to inject hot liquid directly to aimed oil layer, made oil recovery in surrounding wells. It is proposed that geothermal oil recovery forerunner test should be first conducted in favorable blocks.

Prediction of wax precipitation region in wellbore during deep water oil well testing

During deep water oil well testing, the low temperature environment is easy to cause wax precipitation, which affects the normal operation of the test and increases operating costs and risks. Therefore, a numerical method for predicting the wax precipitation region in oil strings was proposed based on the temperature and pressure fields of deep water test string and the wax precipitation calculation model. And the factors affecting the wax precipitation region were analyzed. The results show that: the wax precipitation region decreases with the increase of production rate, and increases with the decrease of geothermal gradient, increase of water depth and drop of water-cut of produced fluid, and increases slightly with the increase of formation pressure. Due to the effect of temperature and pressure fields, wax precipitation region is large in test strings at the beginning of well production. Wax precipitation region gradually increases with the increase of shut-in time. These conclusions can guide wax prevention during the testing of deep water oil well, to ensure the success of the test.

Donghe Sandstone Subtle Reservoir Exploration and Development Technology in Hade 4 Oilfield

Hade 4 oilfield is located on the Hadexun tectonic belt north of the Manjiaer depression in the Tarim basin, whose main target layer is the Donghe sandstone reservoir, with a burial depth over 5,000m and an amplitude below 34m, at the bottom of the Carboniferous. The Donghe sandstone reservoir consists of littoral facies deposited quartz sandstones of the transgressive system tract, overlapping northward and pinching out. Exploration and development confirms that water-oil contact tilts from the southeast to the northwest with a drop height of nearly 80m. The reservoir, under the control of both the stratigraphic overlap pinch-out and tectonism, is a typical subtle reservoir. The Donghe sandstone reservoir in Hade 4 oilfield also has the feature of a large oil-bearing area (over 130 km2 proved), a small thickness (average efficient thickness below 6m) and a low abundance (below 50 × 104t/km2). Moreover, above the target layer developed a set of igneous rocks with an uneven thickness in the Permian formation, thus causing a great difficulty in research of the velocity field. Considering these features, an combination mode of exploration and development is adopted, namely by way of whole deployment, step-by-step enforcement and rolling development with key problems to be tackled, in order to further deepen the understanding and enlarge the fruits of exploration and development. The paper technically focuses its study on the following four aspects concerning problem tackling. First, to strengthen the collecting, processing and explanation of seismic data, improve the resolution, accurately recognize the pinch-out line of the Donghe sandstone reservoir by combining the drilling materials in order to make sure its distribution law; second, to strengthen the research on velocity field, improve the accuracy of variable speed mapping, make corrections by the data from newly- drilled key wells and, as a result, the precision of tectonic description is greatly improved; third, to strengthen the research on sequence stratigraphy and make sure the distribution law of the Donghe sandstone; and fourth, with a step- by-step extrapolation method, to deepen the cognition of the leaning water-oil contact, and by combining the tectonic description and drilling results, to make sure little by little the law of change of the water-oil contact. The exploration and development of the Donghe sandstone subtle reservoir in Hade 4 oilfield is a gradually perfected process. From 1998 when it was discovered till now, the reservoir has managed to make a benign circle of exploration and development, in which its reserve has gradually been enlarged, its production scale increased, and, in a word, it has used techniques necessary for this subtle reservoir in the Tarim basin.

Development Plan of East Unity Oil Field, Sudan, Using Reservoir Simulation Study

Simulation study was applied in the development planning of East Unity oilfield, Sudan. A grid consisting of 2 000 cells was constructed. A major challenge of the study wasto evolve a full field development and future reservoir management strategy that would ensuremaximum recovery of oil based on well Un51. Simulation shows that Un51 as injection well inAradiebaC would yield better oil recovery than to be production well.

Optimization of Temperature Drop Formula for Annular Gathering Pipeline in High Water Cut Oil Region of Central Hebei Province

In order to respond to the national policy of energy saving and consumption reduction, the temperature drop formula of annular pipeline should be established to optimize the water mixing temperature and water mixing flow. The traditional temperature drop formula applies the high water cut actual situation to 13.7%. On the basis of the traditional Schulhof temperature drop formula, the influence of hydraulic friction on the oil flow temperature is calculated by the calculus idea. The heat transfer coefficient of the pipeline under the complex condition is obtained by the inverse algorithm, and the water mixing flow and water temperature are simulated with MATLAB. The function surface diagram of the degree and the back station temperature. The actual error can be reduced to 4.8%, and the return station temperature can be optimized by 7 degrees.

The Degradation and Pollution of Soils on the Territory of the Kovykta Gas Condensate Field

In this paper, research results from the time interval 2002-2012 are used to give an account of the chemical composition of soils on the territory of the Kovykta gas condensate field. The findings presented provide a better understanding of the ecological state of soil cover, its resilience to anthropogenic impacts, and its possible disturbance caused by the drilling pad construction activity, and by the laying of geophysical profiles. An analysis of soil pollution for the study territory generally showed that the soils are polluted with chemical elements which refer to toxicity classes： Pb, Cu, Ni, Cr, Ba and Mn. High levels ofoil products were detected near boreholes. Strong mineralization was recorded in the soil near borehole. It has a chloride-sodium chemical composition. As a result of the construction of foundation pits, recesses, ditches and earth embankments, the soil is totally destroyed, and rock outcrops show up. Disturbances of the sod cover due to road construction or even by all-terrain vehicles in these extreme conditions entail an accelerated development of linear erosion to form scours and gullies. Elimination of the canopy layer leads to an increase in surface heating, and to an acceleration of permafrost thawing. Swamping is accelerated on negative relief forms due to the increased entry of melt waters.

Oilfield geothermal resources of the Upper Assam Petroliferous Basin,NE India

Extracting geothermal energy from the oil-producing fields is an experimental venture globally.The exploitation and utilization of geothermal energy can partly reduce the larger dependence on conventional non-renewable energy sources like oil,gas,coal,and other fossil fuels,and has a bright prospect.The Upper Assam Basin is a mature petroliferous basin of NE India,where there are several hundred low production,high water cut,or abandoned oil and gas wells that can be retrofitted as geothermal wells instead of drilling new ones.This will help bridge the gap of growing energy demand and limited supply in energy-deficient state like Assam.Situated away from the active plate boundaries and in lack of active volcanism,the Upper Assam Basin remains a low-to-medium enthalpy geothermal fluid regime.The deeper reservoir in this regard can,therefore,be the best candidate for the introspection of the potential geothermal energy reservoir reconnaissance.The selection of a deeper horizon considered in the present case has been the stratified reservoirs of the Lakadong-Therria(Lk-Th)Formation,Sylhet Group of the Lower Eocene age occurring at a variable depth of 3400 me 4600 m.The Lk-Th Formation possesses a fair-quality reservoir with lateral continuity and favourable petrophysical properties.In this study,representative gamma-ray(GR)and resistivity(R)logs were examined to work out lithology,and bed boundary demarcation,etc.The total Formation thickness varies from 97 to 157 m;the individual sand body thickness is up to 6 m.Other reservoir parameters,e.g.,porosity(φ=8-33%),water saturation(S_(w)=4.57-95.15%),geothermal gradient(2.71℃/100m to 3.92 C/100 m at 4300 m and 3608 m)respectively,and theoretical estimate of high heat flux in the range 70e100 mW/m^(2)/s,are the necessary yard-stick to measure the subsurface geothermal reserves.Efficient energy extraction will have the potential in facilitating energy utilization for industrial purposes,especially in tea processing units present nearby oilfields and also for power generation by the binary mechanism.

Shale oil recovery by CO_(2)injection in Jiyang Depression,Bohai Bay Basin,East China

Laboratory experiments,numerical simulations and fracturing technology were combined to address the problems in shale oil recovery by CO_(2)injection.The laboratory experiments were conducted to investigate the displacement mechanisms of shale oil extraction by CO_(2)injection,and the influences of CO_(2)pre-pad on shale mechanical properties.Numerical simulations were performed about influences of CO_(2)pre-pad fracturing and puff-n-huff for energy replenishment on the recovery efficiency.The findings obtained were applied to the field tests of CO_(2)pre-pad fracturing and single well puff-n-huff.The results show that the efficiency of CO_(2)puff-n-huff is affected by micro-and nano-scale effect,kerogen,adsorbed oil and so on,and a longer soaking time in a reasonable range leads to a higher exploitation degree of shale oil.In the"injection+soaking"stage,the exploitation degree of heavy hydrocarbons is enhanced by CO_(2)through its effects of solubility-diffusion and mass-transfer.In the"huff"stage,crude oil in large pores is displaced by CO_(2)to surrounding larger pores or bedding fractures and finally flows to the production well.The injection of CO_(2)pre-pad is conducive to keeping the rock brittle and reducing the fracture breakdown pressure,and the CO_(2)is liable to filter along the bedding surface,thereby creating a more complex fracture.Increasing the volume of CO_(2)pre-pad can improve the energizing effect,and enhance the replenishment of formation energy.Moreover,the oil recovery is more enhanced by CO_(2)huff-n-puff with the lower shale matrix permeability,the lower formation pressure,and the larger heavy hydrocarbon content.The field tests demonstrate a good performance with the pressure maintained well after CO_(2)pre-pad fracturing,the formation energy replenished effectively after CO_(2)huff-n-puff in a single well,and the well productivity improved.