Energy-saving Technology of Vent in Passive Solar Wall of Rural House of Severe Cold Region

This paper aims at solving the problems of low thermal collection rate,inconvenient maintenance,hindering indoor using during the application of passive solar technologies in rural houses in severe cold region.All these defects prevent the passive solar houses' further development. This paper chooses trombe wall,which has higher thermal efficiency of the passive solar house,as research object. The traditional vent is improved into a new type of ventilation device. This improvement overcomes the shortcoming,which traditional vent loses huge heat,and simplifies the construction of vent. Comparing with traditional trombe wall,the energy saving rate is 15. 69%.

Energy-saving Technology Application in Building Water Supply and Drainage Construction

Under the increasing demands as well as resource shortages in today’s society,energy-saving technologies in building water supply and drainage construction plays a vital role.Through the rational application of energy-saving technologies,energy consumption in water supply and drainage projects can be significantly minimized and wastage of water resources can be reduced.This will play a very promising role in promoting sustainable development of resources and environmental conservation in the modern era.This paper analyzes the application of energy-saving technology in building water supply and drainage construction,with an aspiration to make energy-saving technology more reasonable in today’s building water supply and drainage projects and to improve the quality of water supply and drainage construction projects,while achieving effective environmental protection.

Energy-Saving Technology in Indoor LTE System with DTX Based on CQI

In LTE (Long Term Evolution) system, CQI (Channel Quality Indication) is a technical method to realize adaptive modulation and coding. The dispatcher of BS (base station) would allocate resource blocks to users dynamically based on CQI of uplink and downlink channels, which is necessary in the process of uplink and downlink transmission [1]. When the CQI level of the channel is high, the energy efficiency is high. On the contrary, when the CQI level of the channel is low, the energy efficiency is low. However, if signals are not transmitted until the quality of the channel is good, energy loss may be lowered in the expense of group delay. That is to say, we take CQI into account on the basis of the technology of DTX [2] [3] (Discontinuous Transmission). According to the result of simulation, the energy consumption can be reduced by using our proposed scheme. Particularly, the energy-saving effect is significant when the load is low.

Application Strategy of PLC Technology in Energy-Saving Control of Tunnel Lighting

In this study,we investigated on the application of planar lightwave circuit(PLC)technology in energy-saving control of tunnel lighting.The application status of PLC in the field of energy saving followed by the necessity of energy saving in tunnel lighting was analyzed.Finally,the application of PLC in tunnel lighting energy-saving control around the three dimensions of system overall architecture design,control scheme,and program control process was investigated.The results showed that the system meets the requirements of control effect,robustness,and visual effect after trial operation,and is suitable for practical applications.

6G New Multiple Access Technology

As a basic technology at physical layer of mobile communications,non-orthogonal multiple access has been attracting wide attention across the academia and the industry.During the standardization of the fifth-generation(5G)of mobile communications,3GPP conducted preliminary study on non-orthogonal multiple access without reaching the consensus to standardize the technology.

Energy-Saving Distributed Flexible Job Shop Scheduling Optimization with Dual Resource Constraints Based on Integrated Q-Learning Multi-Objective Grey Wolf Optimizer

The distributed flexible job shop scheduling problem(DFJSP)has attracted great attention with the growth of the global manufacturing industry.General DFJSP research only considers machine constraints and ignores worker constraints.As one critical factor of production,effective utilization of worker resources can increase productivity.Meanwhile,energy consumption is a growing concern due to the increasingly serious environmental issues.Therefore,the distributed flexible job shop scheduling problem with dual resource constraints(DFJSP-DRC)for minimizing makespan and total energy consumption is studied in this paper.To solve the problem,we present a multi-objective mathematical model for DFJSP-DRC and propose a Q-learning-based multi-objective grey wolf optimizer(Q-MOGWO).In Q-MOGWO,high-quality initial solutions are generated by a hybrid initialization strategy,and an improved active decoding strategy is designed to obtain the scheduling schemes.To further enhance the local search capability and expand the solution space,two wolf predation strategies and three critical factory neighborhood structures based on Q-learning are proposed.These strategies and structures enable Q-MOGWO to explore the solution space more efficiently and thus find better Pareto solutions.The effectiveness of Q-MOGWO in addressing DFJSP-DRC is verified through comparison with four algorithms using 45 instances.The results reveal that Q-MOGWO outperforms comparison algorithms in terms of solution quality.

Science and Technology Commissioners Supporting High-Quality Development Project for Hundreds of Counties, Thousands of Towns, and Myriads of Villages in the Context of Rural Revitalization

This paper discusses the important role of science and technology commissioners in the high-quality development of hundreds of counties,thousands of towns,and myriads of villages in the context of rural revitalization,including building bridges,accelerating the transformation of achievements,promoting the value-added of the whole agricultural industry chain,and promoting the rapid development of rural industrial economy.It also discusses the working achievements of science and technology commissioners,in order to promote further development of rural revitalization in Guangdong Province.

The Impact of Health Information Technology on Hospital Performance: A Systematic Integrative Literature Review

Objective: To review, categorise, and synthesise findings from literature on health information technology (HIT) functionalities, HIT use, and the impact of HIT on hospital performance. Materials and Methods: We conducted a systematic integrative literature review based on a compre-hensive database search. To organise, categorise and synthesise the ex-isting literature, we adopted the affordance actualization theory. To align the literature with our research framework, we used four categories: 1) the functionalities of HIT and how these functionalities are measured;2) use and immediate outcomes of HIT functionalities;3) different perfor-mance indicators and how HIT functionalities affect them;and 4) what hospital characteristics influence the outcome of hospital performance. Results: Fifty-two studies were included. We identified four types of HIT. Only ten studies (19.2%) define the use of HIT by explicitly meas-uring the use rate of HIT. We identified five dimensions of hospital per-formance indicators. Every dimension showed mixed results;however, in general, HIT has a positive impact on mortality and patient readmis-sions. We found several hospital characteristics that may affect the rela-tionship between HIT and hospital-level outcomes. Discussion: Further efforts should focus on embedded research on HIT functionalities, use and effects of HIT implementations with more performance indicators and adjusted for hospital characteristics. Conclusion: The proposed framework could help hospitals and researchers make decisions regard-ing the functionalities, use and effects of HIT implementation in hospi-tals. Given our research outcomes, we suggest future research opportuni-ties to improve understanding of how HIT affects hospital performance. .

Research Progress of Atrial Fibrillation Detection Technology

Atrial fibrillation (AF) is the most common chronic arrhythmia in clinical practice, which can cause high disability and mortality with the progress of the disease. Many studies at home and abroad have shown that the incidence of atrial fibrillation gradually increases with age. Clinically, the onset of most AF patients is insidious, which is difficult to capture by routine electrocardiogram, and there is some difficulty in the diagnosis. In order to make the early diagnosis of atrial fibrillation more efficient and accurate, this paper reviews the current status and research progress of detection technology for atrial fibrillation at home and abroad, in order to provide a scientific basis for the early diagnosis of atrial fibrillation.

Structural insights on anti-biofilm mechanism of heated slightly acidic electrolyzed water technology against multi-resistant Staphylococcus aureus biofilm on food contact surface

Slightly acidic electrolyzed water(SAEW)has proven to be an efficient and novel sanitizer in food and agriculture field.This study assessed the efficacy of SAEW(30 mg/L)at 40℃on the inactivation of foodbome pathogens and detachment of multi-resistant Staphylococcus aureus(MRSA)biofilm.Furthermore.the underlying mechanism of MRS A biofilm under heated SAEW at 40℃treatment on metabolic profiles was investigated.The results showed that the heated SAEW at 40℃significantly effectively against foodbome pathogens of 1.96-7.56(lg(CFU/g))reduction in pork,chicken,spinach,and lettuce.The heated SAEW at 40℃treatment significantly reduced MRS A biofilm cells by 2.41(lg(CFU/cm^(2))).The synergistic effect of SAEW treatment showed intense anti-biofilm activity in decreasing cell density and impairing biofilm cell membranes.Global metabolic response of MRSA biofilms,treated by SAEW at 40℃,revealed the alterations of intracellular metabolites,including amino acids,organic acid,fatty acid,and lipid.Moreover,signaling pathways involved in amino acid metabolism,energy metabolism,nucleotide synthesis,carbohydrate metabolites,and lipid biosynthesis were functionally disrupted by the SAEW at 40℃treatment.As per our knowledge,this is the first research to uncover the potential mechanism of heated SAEW treatment against MRSA biofilm on food contact surface.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

Prospects for green steelmaking technology with low carbon emissions in China

The steel industry is a major source of CO_(2) emissions,and thus,the mitigation of carbon emissions is the most pressing challenge in this sector.In this paper,international environmental governance in the steel industry is reviewed,and the current state of development of low-carbon technologies is discussed.Additionally,low-carbon pathways for the steel industry at the current time are proposed,emphasizing prevention and treatment strategies.Furthermore,the prospects of low-carbon technologies are explored from the perspective of transitioning the energy structure to a“carbon-electricity-hydrogen”relationship.Overall,steel enterprises should adopt hydrogen-rich metallurgical technologies that are compatible with current needs and process flows in the short term,based on the carbon substitution with hydrogen(prevention)and the CCU(CO_(2) capture and utilization)concepts(treatment).Additionally,the capture and utilization of CO_(2) for steelmaking,which can assist in achieving short-term emission reduction targets but is not a long-term solution,is discussed.In conclusion,in the long term,the carbon metallurgical process should be gradually supplanted by a hydrogen-electric synergistic approach,thus transforming the energy structure of existing steelmaking processes and attaining near-zero carbon emission steelmaking technology.

Geospatial Technology Integration in Smart City Frameworks for Achieving Climate Neutrality by 2050: A Case Study of Limassol Municipality, Cyprus

This study investigated the integration of geospatial technologies within smart city frameworks to achieve the European Union’s climate neutrality goals by 2050. Focusing on rapid urbanization and escalating climate challenges, the research analyzed how smart city frameworks, aligned with climate neutrality objectives, leverage geospatial technologies for urban planning and climate action. The study included case studies from three leading European cities, extracting lessons and best practices in implementing Climate City Contracts across sectors like energy, transport, and waste management. These insights highlighted the essential role of EU and national authorities in providing technical, regulatory, and financial support. Additionally, the paper presented the application of a WEBGIS platform in Limassol Municipality, Cyprus, demonstrating citizen engagement and acceptance of the proposed geospatial framework. Concluding with recommendations for future research, the study contributed significant insights into the advancement of urban sustainability and the effectiveness of geospatial technologies in smart city initiatives for combating climate change.

Coordination Mechanism and Empirical Research on Marine Science Technology Innovation and Marine Eco-civilization:A Case Study of Coastal Areas of China

Marine science technology innovation provides power and guarantees for marine eco-civilization construction,which provides direction and material support for marine science technology innovation.Therefore,the coordinated development of the two is of great significance to the marine economy sustainable development in China’s coastal areas.On the basis of clarifying the connotations of marine science technology innovation and marine eco-civilization in China’s coastal areas from 2006 to 2019,the mechanism for their coordinated development was analysed.A comprehensive indicator system based on the connotation of the two was constructed,and the coordinated development relationship was empirically tested using the coupled coordination model and the panel vector autoregressive(PVAR)model.The results show that:1)the level of China’s coastal marine science technology innovation continues to improve,gradually forming the core of the development of marine science technology innovation in the north,east and south of Shandong,Shanghai and Guangdong;the level of marine eco-civilization development fluctuating upward trend,showing obvious spatial differentiation characteristics.2)The degree of coordination of marine science technology innovation and marine eco-civilization is growing over time.There is no causal relationship between marine science technology innovation and marine eco-civilization in the northern marine economic circle,but there is a two-way causal relationship between the two in the eastern and southern marine economic circles.3)Marine eco-civilization shows a significant positive and continuous impact on marine science technology innovation,and marine science technology innovation shows a long-term,continuous,fluctuating,and lagging impact on marine eco-civilization.The overall role of marine eco-civilization on marine science technology innovation is dominant,and there are significant differences in the impact effects of the two major marine economic circles.

Complex adaptive system theory,agent-based modeling,and simulation in dominant technology formation

Dominant technology formation is the key for the hightech industry to“cross the chasm”and gain an established foothold in the market(and hence disrupt the regime).Therefore,a stimulus-response model is proposed to investigate the dominant technology by exploring its formation process and mechanism.Specifically,based on complex adaptive system theory and the basic stimulus-response model,we use a combination of agent-based modeling and system dynamics modeling to capture the interactions between dominant technology and the socio-technical landscape.The results indicate the following:(i)The dynamic interaction is“stimulus-reaction-selection”,which promotes the dominant technology’s formation.(ii)The dominant technology’s formation can be described as a dynamic process in which the adaptation intensity of technology standards increases continuously until it becomes the leading technology under the dual action of internal and external mechanisms.(iii)The dominant technology’s formation in the high-tech industry is influenced by learning ability,the number of adopting users and adaptability.Therein,a“critical scale”of learning ability exists to promote the formation of leading technology:a large number of adopting users can promote the dominant technology’s formation by influencing the adaptive response of technology standards to the socio-technical landscape and the choice of technology standards by the socio-technical landscape.There is a minimum threshold and a maximum threshold for the role of adaptability in the dominant technology’s formation.(iv)The socio-technical landscape can promote the leading technology’s shaping in the high-tech industry,and different elements have different effects.This study promotes research on the formation mechanism of dominant technology in the high-tech industry,presents new perspectives and methods for researchers,and provides essential enlightenment for managers to formulate technology strategies.

Aerosol deposition technology and its applications in batteries

Aerosol deposition(AD)method is a kind of additive manufacturing technology for fabricating dense films such as metals and ceramics at room temperature.It resolves the challenge of integrating ceramic films onto temperaturesensitive substrates,including metals,glasses,and polymers.It should be emphasized that the AD is a spray coating technology that uses powder without thermal assistance to generate films with high density.Compared to the traditional sputter-based approach,the AD shows several advantages in efficiency,convenience,better interfacial bonding and so on.Therefore,it opens some possibilities to the field of batteries,especially all-solidstate batteries(ASSBs)and draws much attention not only for research but also for large scale applications.The purpose of this work is to provide a critical review on the science and technology of AD as well as its applications in the field of batteries.The process,mechanism and effective parameters of AD,and recent developments in AD applications in the field of batteries will be systematically reviewed so that a trend for AD will be finally provided.

A new horizon for neuroscience:terahertz biotechnology in brain research

Terahertz biotechnology has been increasingly applied in various biomedical fields and has especially shown great potential for application in brain sciences.In this article,we review the development of terahertz biotechnology and its applications in the field of neuropsychiatry.Available evidence indicates promising prospects for the use of terahertz spectroscopy and terahertz imaging techniques in the diagnosis of amyloid disease,cerebrovascular disease,glioma,psychiatric disease,traumatic brain injury,and myelin deficit.In vitro and animal experiments have also demonstrated the potential therapeutic value of terahertz technology in some neuropsychiatric diseases.Although the precise underlying mechanism of the interactions between terahertz electromagnetic waves and the biosystem is not yet fully understood,the research progress in this field shows great potential for biomedical noninvasive diagnostic and therapeutic applications.However,the biosafety of terahertz radiation requires further exploration regarding its two-sided efficacy in practical applications.This review demonstrates that terahertz biotechnology has the potential to be a promising method in the field of neuropsychiatry based on its unique advantages.

TLC Identification of Yao Medicine Pileostegia tomentellal and Extraction Technology and Content Determination of Umbelliferone

[Objectives]To establish a TLC and content determination method of Pileostegia tomentellal,with umbelliferone as the indicator component.[Methods]TLC identification was performed by silica gel G thin layer plate with n-hexane-ethyl acetate(4:3)as the developing agent,and the plate was examined by UV lamp(365 nm).The umbelliferone content was determined by HPLC:Inertsil ODS-3 C 18 column(4.60 mm×250 mm,5μm);mobile phase acetonitrile-0.2%phosphoric acid gradient elution;detection wavelength 320 nm,flow rate 1.0 mL/min,column temperature 30℃,injection volume 10μL.[Results]The chromatogram of P.tomentellal showed the same color spot in the same position as that of reference medicinal material,and the spot was clear with good specificity.Umbelliferone showed a good linear relationship when the injection volume was 2.63-131.27μg/mL(R^(2)=0.9997).The average recovery of umbelliferone in the low,middle and high adding groups of P.tomentellal was 99.57%and the RSD was 2.15%.[Conclusions]The method can effectively identify Yao medicine P.tomentellal and accurately determine the content of umbelliferone in medicinal materials,which will provide a scientific basis for the development and utilization of medicinal resources of Yao medicine P.tomentellal.

High Yield Cultivation and Pest Control Technology of Cashew

In order to enhance the yield and quality of cashew,it is essential to implement high-yield cultivation techniques effectively throughout the production process.Additionally,pest control measures should be employed to provide technical support for the industrialized development of cashew.