Teaching Experiment in Engineering Mechanics Based on Simulation Technology:A Case Study

This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as colored Mises stress nephograms,were obtained.These resources were integrated into the original curriculum to conduct teaching experiments.The results show that the use of digital resources significantly improved the quality of teaching in EM.The integration of simulation technology in EM teaching provides a promising direction for the improvement of vocational education and the cultivation of high-quality skilled talents.The development and application of more simulation-based teaching cases should be studied by scholars.

Defect Engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage market.However,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical applications.Defect engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for RMBs.In this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further presented.Then,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are discussed.The applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also summarized.Finally,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

Application of Monte-Carlo statistical experiments in design of ocean engineering - Estimating the parameters, models and probabilities

Recently, some results have been acquired with the Monte- Carlo statistical experiments in the design of ocean en gineering. The results show that Monte-Carlo statistical experiments can be widely used in estimating the parameters of wave statistical distributions, checking the probability model of the long- term wave extreme value distribution under a typhoon condition and calculating the failure probability of the ocean platforms.

Preliminary experimental study of urethral reconstruction Nith tissue engineering and RNA interference techniques

This study investigated the feasibility of replacing urinary epithelial cells with oral keratinocytes and transforming growth factor-β1 （TGF-β1） small interfering RNA （siRNA）-transfected fibroblasts seeded on bladder acellular matrix graft （BAMG） in order to reconstruct tissue-engineered urethra. Constructed siRNAs, which expressed plasmids targeting TGF-β1, were transfected into rabbit fibroblasts. The effective siRNA was screened out by RT-PCR and was transfected into rabbit fibroblasts again. Synthesis of type I collagen in culture medium was measured by enzyme-linked immuno sorbent assay （ELISA）. Autologous oral keratinocytes and TGF-β1 siRNA-transfected fibroblasts were seeded onto BAMGs to obtain a tissue-engineered mucosa. The tissue-engineered mucosa was assessed morphologically and with the help of scanning electron microscopy. The TGF-β1 siRNA decreased the expression of fibroblasts synthesis type I collagen. Oral keratinocytes and TGF-β1 siRNA-transfected fibroblasts were seeded onto sterilized BAMG to obtain a tissue-engineered mucosa for urethral reconstruction. The compound graft was assessed using scanning electron microscope. Oral keratinocytes and TGF-β1 siRNA-transfected fibroblasts had a good compatibility with BAMG. The downregulation of fibroblasts synthesis type I collagen expression by constructed siRNA interfering TGF-β1 provided a potential basis for genetic therapy of urethral scar. Oral keratinocytes and TGF-β1 siRNA-transfected fibroblasts had good compatibility with BAMG and the compound graft could be a new choice for urethral reconstruction.

Experimental Study on Allogenic Decalcified Bone Matrix as Carrier for Bone Tissue Engineering

The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In vitro, DBM and bone marrow stromal cell (BMSC) from rabbits were co-cultured for 3-7 days and subjected to HE staining, and a series of histomorphological observations were performed under phase-contrast microscopy and scanning electron microscopy (SEM). In vivo the mixture of DBM/BMSC co-cultured for 3 days was planted into one side of muscules sacrospinalis of rabbits, and the DBM without BMSC was planted into other side as control. Specimens were collected at postoperative week 1, 2 and 4, and subjected to HE staining, and observed under SEM. The results showed during culture in vitro, the BMSCs adherent to the wall of DBM grew, proliferated and had secretive activity. The in vivo experiment revealed that BMSCs and undifferentiated mesenchymal cells in the perivascular region invaded gradually and proliferated together in DBM/BMSC group, and colony-forming units of chondrocytes were found. Osteoblasts, trabecular bone and medullary cavity appeared. The inflammatory reaction around muscles almost disappeared at the second weeks. In pure DBM group, the similar changes appeared from the surface of the DBM to center, and the volume of total regenerate bones was less than the DBM/BMSC group at the same time. The results indicated that the mixture of DBM and BMSC had good biocompatibility and ectopic induced osteogenic activity.

Railway Engineering Experimental Teaching Research Based on the Combination of Field Experiment and Virtual Reality(VR)Technology——Taking Central South University as an Example

At present,rail transit is developing rapidly in the world,and this means new and changing requirements for the training of talents in railway engineering experiments.Given the current problems of limited laboratory/field instruments for railway engineering experimentsand the safety/administrative difficulties of going to the frontline of railway lines to teach railway engineering experiemnts in the field,the Department of Railway Engineering of Central South University tried to introduce virtual reality(VR)technology to teach students experiments in the field of railway engineering.Through the virtualized experimental methods,students can carry out railway engineering experiments such as;vehicle wheel pair off-axis experiments,track geometry and position detection,etc.by immersive means.It was observed that after performing virtual simulation experiments,students appeared conversant in subsequent field experiments.Thus,VR greatly improves the teaching efficiency of railway engineering experiments.

Experiment on mechanical properties of steel fiber reinforced concrete and application in deep underground engineering

Specimens of steel fiber reinforced concrete （SFRC） in volume ratios of 0%, 0.5%, 1% and 1.5% were prepared to study the supporting effect of SFRC at these diffterent volume ratios in a deep soft rock tunnel. Experiments with mechanical properties of compressive strength in cubic specimens, cleave strength in cylindrical specimens and four-point flexure strength of sheet metal specimens were carded out. The experimental results indicate that SFRC in a volume ratio of 1% is superior in ranking to other volume ratios in terms of technique and economics. By means of a numerical simulation, given the characteristics of soft rock deformation and damage at great depth, a new support substitution scheme of SFRC to replace plain concrete is proposed. The results of an industrial trial show that the support provided by SFRC can withstand large deformations of the surrounding rock. Good resuits have been obtained in a practical anplication.

Role of bioengineering structures made of willow cuttings in marly sediment trapping: assessment of three real-size experiments in the Southern French Alps

Improving knowledge on the ability of bioengineering structures made of willow cuttings to enhance efficient and sustainable sediment trapping in marly gullies in the Southern French Alps under a mountainous Mediterranean climate, to decreasesediment trapped per experiment, the mean annual values reached 0.25, 0.14 and 0.08 m3 yr-1 in experiments C, A and B, respectively. Maximum values for one structure reached 1.94 m3 per year in experiment C. The significance of the volumes ofsediment yield at their outlets, is a key issue today for the international scientific community working in geosciences and ecology. This study therefore aims to assess three real-size experiments(A, B and C) carried out between 2003 and 2013 in this environment. A total of 157 bioengineering structures using purple and white willow(Salix purpurea and Salix incana)cuttings – which have been shown to resprout and survive more than 2 years after their installation,corresponding to brush layers with brush mats on wooden sills(BLM), 1.2 m wide and 2 m long,installed on the floors of 33 experimental marly gullies, were monitored. The results showed that sediment trapping occurred upstream of the vegetation barriers from the 1 st year onwards.Considering the depth of sediment trapped per experiment, the mean annual values reached 11.2 cm yr-1 after 3 years in experiment A, 7.7 cm yr-1 after 2–4 years in experiment C and 5.1 cm yr-1 after 5 years in experiment B. Occasionally, BLMs showed that they could trap up to 16 and 15 cm yr-1 in experiments A and C, respectively. Considering the volumes oftrapped sediment and the sustainability of sediment trapping are discussed, and rules for bioengineering strategies are proposed.

Usability Experiments to Evaluate UML/SysML-Based Model Driven Software Engineering Notations for Logic Control in Manufacturing Automation

Many industrial companies and researchers are looking for more efficient model driven engineering approaches (MDE) in software engineering of manufacturing automation systems (MS) especially for logic control programming, but are uncertain about the applicability and effort needed to implement those approaches in comparison to classical Programmable Logic Controller?(PLC) programming with IEC 61131-3. The paper summarizes results of usability experiments evaluating UML and SysML as software engineering notations for a MDE applied in the domain of manufacturing systems. Modeling MS needs to cover the domain specific characteristics,?i.e.?hybrid process, real time requirements and communication requirements. In addition the paper presents factors, constraint and practical experience for the development of further usability experiments. The paper gives examples of notational expressiveness and weaknesses of UML and SysML. The appendix delivers detailed master models, representing the correct best suited model, and evaluation schemes of the experiment, which is helpful if setting up own empirical experiments.

Research on Experimental Teaching Reform of Railway Engineering under the Training of International Students

The railway engineering major shows extremely strong applicability,with the internationalization of railway engineering teaching and communication,how to solve the problem of cultivating the international students of the railway engineering major experimental teaching is a core problem that the railway engineering majors in universities need to solve at this stage.Through reform,a new type of experimental teaching system for railway engineering specialty was constructed,that is,the experimental course system and content system determined by the international students training program were taken as the core,the construction of teachers,experimental facilities,practice bases and other conditions as the basis,and the system construction and operation organization to build an organic whole composed of four elements for guarantee.It is closely integrated with the theoretical teaching system and relatively independent.It guarantees the realization of the goal of international students training.And it can integrate and optimize the experimental teaching links,content,methods and evaluation system,and build a“gradual experimentprofessional experiment-comprehensive experiment”progressive gradient experiment teaching system.Form a benign pattern of collaborative training of laboratories,practice bases and scientific research bases,mutual promotion of teaching and scientific research,and effectively promote the improvement of students’experimental innovation ability.

Biomimetic natural biomaterials for tissue engineering and regenerative medicine:new biosynthesis methods,recent advances,and emerging applications

Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering(TE)and regenerative medicine.In contrast to conventional biomaterials or synthetic materials,biomimetic scaffolds based on natural biomaterial can offer cells a broad spectrum of biochemical and biophysical cues that mimic the in vivo extracellular matrix(ECM).Additionally,such materials have mechanical adaptability,micro-structure interconnectivity,and inherent bioactivity,making them ideal for the design of living implants for specific applications in TE and regenerative medicine.This paper provides an overview for recent progress of biomimetic natural biomaterials(BNBMs),including advances in their preparation,functionality,potential applications and future challenges.We highlight recent advances in the fabrication of BNBMs and outline general strategies for functionalizing and tailoring the BNBMs with various biological and physicochemical characteristics of native ECM.Moreover,we offer an overview of recent key advances in the functionalization and applications of versatile BNBMs for TE applications.Finally,we conclude by offering our perspective on open challenges and future developments in this rapidly-evolving field.

Computational Experiments for Complex Social Systems:Experiment Design and Generative Explanation

Powered by advanced information technology,more and more complex systems are exhibiting characteristics of the cyber-physical-social systems(CPSS).In this context,computational experiments method has emerged as a novel approach for the design,analysis,management,control,and integration of CPSS,which can realize the causal analysis of complex systems by means of“algorithmization”of“counterfactuals”.However,because CPSS involve human and social factors(e.g.,autonomy,initiative,and sociality),it is difficult for traditional design of experiment(DOE)methods to achieve the generative explanation of system emergence.To address this challenge,this paper proposes an integrated approach to the design of computational experiments,incorporating three key modules:1)Descriptive module:Determining the influencing factors and response variables of the system by means of the modeling of an artificial society;2)Interpretative module:Selecting factorial experimental design solution to identify the relationship between influencing factors and macro phenomena;3)Predictive module:Building a meta-model that is equivalent to artificial society to explore its operating laws.Finally,a case study of crowd-sourcing platforms is presented to illustrate the application process and effectiveness of the proposed approach,which can reveal the social impact of algorithmic behavior on“rider race”.

Compositional and Hollow Engineering of Silicon Carbide/Carbon Microspheres as High-Performance Microwave Absorbing Materials with Good Environmental Tolerance

Microwave absorbing materials(MAMs)characterized by high absorption efficiency and good environmental tolerance are highly desirable in practical applications.Both silicon carbide and carbon are considered as stable MAMs under some rigorous conditions,while their composites still fail to produce satisfactory microwave absorption performance regardless of the improvements as compared with the individuals.Herein,we have successfully implemented compositional and structural engineering to fabricate hollow Si C/C microspheres with controllable composition.The simultaneous modulation on dielectric properties and impedance matching can be easily achieved as the change in the composition of these composites.The formation of hollow structure not only favors lightweight feature,but also generates considerable contribution to microwave attenuation capacity.With the synergistic effect of composition and structure,the optimized SiC/C composite exhibits excellent performance,whose the strongest reflection loss intensity and broadest effective absorption reach-60.8 dB and 5.1 GHz,respectively,and its microwave absorption properties are actually superior to those of most SiC/C composites in previous studies.In addition,the stability tests of microwave absorption capacity after exposure to harsh conditions and Radar Cross Section simulation data demonstrate that hollow SiC/C microspheres from compositional and structural optimization have a bright prospect in practical applications.

Application of Chemical Tracing Experiment Technique in Leakage Detection of Hydraulic Engineering

[Objective] The research aimed to study the application of chemical tracing experiment technique in leakage detection of hydraulic engineering.[Method] According to the current situation of Sanyuan Western Suburb Reservoir in Xianyang City of Shaanxi Province,three sections （L1,L2 and L3） were set.KI was selected as the chemical tracer to carry out the tracing and detection research.[Result] There was no obvious leakage phenomenon in L1,L2 and L3 sections.The impermeability of rock in some dam abutments was bad.[Conclusion] The leakage reason of Western Suburb Reservoir was that the impermeability of rock in some dam abutments couldn’t satisfy seepage requirement.After the reservoir was put into operation,the water level in front of dam rose,and the ground water level of dam abutment also rose.The penetration water pressure correspondingly increased,and the water content of bank slope at the downstream of dam increased.

Defect engineering in transition-metal(Fe,Co,andNi)-based electrocatalysts for water splitting

Electrocatalytic water splitting seems to be an efficient strategy to deal with increasingly serious environmental problems and energy crises but still suffers from the lack of stable and efficient electrocatalysts.Designing practical electrocatalysts by introducing defect engineering,such as hybrid structure,surface vacancies,functional modification,and structural distortions,is proven to be a dependable solution for fabricating electrocatalysts with high catalytic activities,robust stability,and good practicability.This review is an overview of some relevant reports about the effects of defect engineering on the electrocatalytic water splitting performance of electrocatalysts.In detail,the types of defects,the preparation and characterization methods,and catalytic performances of electrocatalysts are presented,emphasizing the effects of the introduced defects on the electronic structures of electrocatalysts and the optimization of the intermediates'adsorption energy throughout the review.Finally,the existing challenges and personal perspectives of possible strategies for enhancing the catalytic performances of electrocatalysts are proposed.An in-depth understanding of the effects of defect engineering on the catalytic performance of electrocatalysts will light the way to design high-efficiency electrocatalysts for water splitting and other possible applications.

Using Hydraulic Engineering Model Experiment to Study the Sediment Trapping Efficiency of Adjustable Check Dam

The construction of fully closed check dam (CD) is a conventional flood prevention mechanism implemented on rivers. Fully closed CDs trap large amounts of sediments in rivers to stabilize the river slopes and control erosion. However, fully closed CDs cannot selectively trap sediment and may easily overflow, causing them to losing their ability to mediate and hold sediments. Previous studies proposed the concept of “breathable CDs”. The researcher introduced metal slit dam (SD) that could be assembled and disassembled quickly and conveniently. Once a CD reaches maximum capacity, operators must ensure that the water channels of the dam are free from blockage. Moreover, they must inspect the internal accumulation conditions of the dam periodically or immediately following heavy typhoon rains. When necessary, either the sediment buildup in the upriver blockage must be cleared, or the transverse structure of the dam must be removed to allow fine particles to be discharged along with a moderate amount of water. These actions can free up the sediment-storing capacity of the dam for the next heavy typhoon rains. In addition, operators should also inspect the damages inflicted on the dam, such as erosion, wear and tear, and deformation conditions. Damaged components should be disassembled and repaired if possible, or recycled and reused. The present study performed channel tests to simulate closed CDs, SDs, steel pipe dam (SPDs), and steel pipe plus slit dam (SPSDs) for 50-year and 100-year frequency floods. Results were then analyzed to determine the sediment trapping (ST) effects of various CDs, the effects of “adjustable CDs”, and the changes of moderated riverbeds.

Experimental Study on Low Intensity Ultrasound and Tissue Engineering to Repair Segmental Bone Defects

In order to evaluate the efficacy of low intensity ultrasound and tissue engineering technique to repair segmental bone defects, the rabbit models of 1.5-cm long rabbit radial segmental osteoperiosteum defects were established and randomly divided into 2 groups. All defects were implanted with the composite of calcium phosphate cement and bone mesenchymal stem cells, and ad- ditionally those in experimental group were subjected to low intensity ultrasound exposure, while those in control group to sham exposure. The animals were killed on the postoperative week 4, 8 and 12 respectively, and specimens were harvested. By using radiography and the methods of biomechanics, histomorphology and bone density detection, new bone formation and material degradation were observed. The results showed that with the prolongation of time after operation, serum alkaline phosphatase （AKP） levels in both groups were gradually increased, especially in experimental group, reached the peak at 6th week （experimental group： 1,26 mmol/L; control group： 0.58 mmol/L）, suggesting the new bone formation in both two group, but the amount of new bone formation was greater and bone repairing capacity stronger in experimental group than in control group. On the 4th week in experimental group, chondrocytes differentiated into woven bone, and on the 12th week, remodeling of new lamellar bone and absorption of the composite material were observed. The mechanical strength of composite material and new born density in experimental group were significantly higher than in control group, indicating that low intensity ultrasound could not only effectively increase the formation of new bone, but also accelerate the calcification of new bone. It was concluded that low intensity ultrasound could evidently accelerate the healing of bone defects repaired by bone tissue engineering.

Interface Engineering of Titanium Nitride Nanotube Composites for Excellent Microwave Absorption at Elevated Temperature

Currently,the microwave absorbers usually suffer dreadful electromagnetic wave absorption(EMWA)performance damping at elevated temperature due to impedance mismatching induced by increased conduction loss.Consequently,the development of high-performance EMWA materials with good impedance matching and strong loss ability in wide temperature spectrum has emerged as a top priority.Herein,due to the high melting point,good electrical conductivity,excellent environmental stability,EM coupling effect,and abundant interfaces of titanium nitride(TiN)nanotubes,they were designed based on the controlling kinetic diffusion procedure and Ostwald ripening process.Benefiting from boosted heterogeneous interfaces between TiN nanotubes and polydimethylsiloxane(PDMS),enhanced polarization loss relaxations were created,which could not only improve the depletion efficiency of EMWA,but also contribute to the optimized impedance matching at elevated temperature.Therefore,the TiN nanotubes/PDMS composite showed excellent EMWA performances at varied temperature(298-573 K),while achieved an effective absorption bandwidth(EAB)value of 3.23 GHz and a minimum reflection loss(RLmin)value of−44.15 dB at 423 K.This study not only clarifies the relationship between dielectric loss capacity(conduction loss and polarization loss)and temperature,but also breaks new ground for EM absorbers in wide temperature spectrum based on interface engineering.

Ionization Engineering of Hydrogels Enables Highly Efficient Salt‑Impeded Solar Evaporation and Night‑Time Electricity Harvesting

Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization.Hydrogels,as a tunable material platform from the molecular level to the macroscopic scale,have been considered the most promising candidate for solar evaporation.However,the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck,restricting the widespread application.Herein,we report ionization engineering,which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules,fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine.The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers.The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m−2 h−1 in 20 wt%brine with 95.6%efficiency under one sun irradiation,surpassing most of the reported literature.More notably,such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation.Meantime,on the basis of the cation selectivity induced by the electronegativity,we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night,anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.

From VIB‑to VB‑Group Transition Metal Disulfides:Structure Engineering Modulation for Superior Electromagnetic Wave Absorption

The laminated transition metal disulfides(TMDs),which are well known as typical two-dimensional(2D)semiconductive materials,possess a unique layered structure,leading to their wide-spread applications in various fields,such as catalysis,energy storage,sensing,etc.In recent years,a lot of research work on TMDs based functional materials in the fields of electromagnetic wave absorption(EMA)has been carried out.Therefore,it is of great significance to elaborate the influence of TMDs on EMA in time to speed up the application.In this review,recent advances in the development of electromagnetic wave(EMW)absorbers based on TMDs,ranging from the VIB group to the VB group are summarized.Their compositions,microstructures,electronic properties,and synthesis methods are presented in detail.Particularly,the modulation of structure engineering from the aspects of heterostructures,defects,morphologies and phases are systematically summarized,focusing on optimizing impedance matching and increasing dielectric and magnetic losses in the EMA materials with tunable EMW absorption performance.Milestones as well as the challenges are also identified to guide the design of new TMDs based dielectric EMA materials with high performance.