Technological Innovation Characteristics and Capacity Enhancement Ways for the Agricultural Science and Technology Enterprises in Beijing City

From the perspective of innovation mechanism,capital,personnel,achievements and conversion,this study analyzes the current situation of technological innovation in Beijing agricultural science and technology enterprises,and summarizes the characteristics including single financing channel of R&D funds,low conversion rate of innovative products,unbalanced distribution of technology and innovative talents,the underestimated position of enterprises as the main body of technological innovation,the large gap of innovation achievements between developed provinces and Beijing.At last,this study puts forward the ways to improve technological innovation ability in Beijing agricultural science and technology enterprises as follows:developing technological innovation strategies;improving the R&D expenditure and expanding the financing channels;perfecting the mechanism of professional personnel training in agricultural technology innovation;enhancing the level of innovation performance management;establishing and improving the corporate culture of innovation and cultivating technology innovation spirit.

Study on the Migration Mechanism of Typical Characteristic Pollutants in Coking Enterprises

Groundwater pollution in north China is serious, which is mostly caused by complex factors. Aiming at the problems such as the unknown reasons for the differences in the migration characteristics of typical characteristic pollutants in the same medium and the unknown migration rules of complex pollutants in soil and groundwater, this paper selected a single sample and a mixed sample of typical characteristic pollutants in coking enterprises to carry out the static adsorption test. The results showed that the distribution coefficients of benzene series and aromatic hydrocarbon pollutants in soil-water were K_(d)benzene >K_(d)toluene >K_(d)ethylbenzene >K_(d)pyrene >K_(d)anthracene >K_(d)naphthene, and the distribution coefficients of ammonia nitrogen, phenols and cyanogen were K_(d)ammonia nitrogen >K_(d)phenols >K_(d)cyanogen. The overall distribution coefficient of benzene series was higher than that of PAHs, and it was easier to be adsorbed by silty loam. Different carbon and hydrogen mass and even electron distribution of typical characteristic pollutants led to differences in the migration characteristics of benzene and aromatic pollutants. The more carbon and hydrogen there were, the more even the electron distribution was, and the more difficult it was to migrate in the soil. Among the same kind of pollutants, the migration of complex pollutants was weaker than that of single pollutants. The research could provide the parameter basis for establishing the solute transport model of groundwater and the design basis for developing the related risk control and pollution prevention strategies.

Intersection capacity based on driver's visual characteristics

In order to reflect the influence of the drivers＇ characteristic differences on intersection capacity under a mixed traffic flow, a driver correction coefficient for the intersection capacity calculation according to the driver＇s visual characteristics is proposed. First, the parameters of the driver＇s visual characteristics at some real roads, including gaze fixation distribution, mean fixation duration, visual angle distribution and some other parameters at intersections, are collected. Then, the relationship between the traffic flow rate at intersections and the parameters of driver eye movements are established. The analytical results indicate that when the traffic flow is unsaturated, the parameters of driver eye movements change relatively little; however, when the traffic flow is saturated, the parameters of driver eye movements change drastically. Finally, the saturation-flow-rate model is modified according to the parameters of driver eye movements; thus, a capacity model of intersections considering the driver＇s visual characteristics is obtained.

甘肃积石山 M_(s)6.2级地震的震害特征与启示

2023年12月18日,甘肃省临夏回族自治州积石山保安族东乡族撒拉族自治县(35.70°N,102.79°E)发生了6.2级地震,震中烈度为VIII度。地震发生后,通过实地烈度评估与科学考察,对震区VI~VIII度区不同建(构)筑物与生命线工程的震害特点进行了统计分析;从抗震设计与施工管理、场地放大效应与地震次生灾害对建筑结构抗震性能的影响等角度,提出了此次地震的震害启示。结果表明:1)严重破坏和毁坏的建筑结构主要集中在老旧的土木结构、砖木结构和无设防或设防不规范的砖混结构。2)造成建筑结构破坏的主要原因是少量自建房抗震设计和施工的不规范、场地放大效应和地震次生灾害。3)优化和改良生土砌筑材料,改进纵横墙间的拉结措施,强化结构整体性是提高土木结构抗震的有效方法;普及“上下圈梁与构造柱”等基本抗震设防措施,规范水泥砂浆强度,提升农村工匠的施工水平,可有效提高砌体结构的整体性,避免房屋出现整体性垮塌;室内洗手间的墙体应该与房顶、纵横墙间建立有效联接,提高结构的抗震性能。4)孤突斜坡、河流高阶地与岸边为抗震不利地带。当建造用地极为匮乏,不得不选址在这些场地之上时,应该综合考虑场地的地形地貌特征、岩土体物理力学特性、水文地质条件、抗震设防目标、建筑结构类型等影响因素,做好地震灾害风险评估,根据评估结果进行科学设防。灾后重建过程中,应由政府统一规划选址、统一设计,规范施工。

基于数值模拟的高速公路S型曲线积水规律分析

S型曲线由于特殊的线型几何特征形成了易积水的路面区域,对于积水规律的掌握有利于在设计和建造阶段提前预防和处理积水路段的危害。该文基于计算流体力学软件Fluent,结合计算流体力学分析中基于欧拉-拉格朗日方法的欧拉液膜模型EWF(Eulerian Wall Film),针对精细化处理的典型S型曲线双向多车道道路模型进行模拟计算。模拟包含了几何特征与降雨量等不同变量因素,得出了积水的水膜厚度以及流速分布规律。模拟结果表明:在降雨阶段,S型曲线横坡坡度0%~1%路段为积水路段,横坡坡度1%~2%路段为易积水路段,横坡坡度大于2%的路段积水情况受到降雨强度影响;在排水阶段,S型曲线横坡坡度0%~1%路段为排水困难路段,横坡坡度1%~2%路段为排水不畅路段,横坡坡度大于2%的路段排水顺畅,在排水时间结束时,路面在不同的几何条件和降雨条件下均能将积水排除至水膜厚度小于2 cm,横坡的大小与渐变影响了积水的横向分布与纵向分布,横向呈现中间高两边低、横断面上标高大的位置水膜厚度小和标高小的位置水膜厚度大的水膜厚度分布规律,总体呈现S型的分布规律;水膜流速在积水阶段呈现纵向上中间低两边高、水膜厚度大则水膜流速大的水膜厚度分布规律,在排水阶段则为纵向上中间高两边低的水膜流速分布规律。道路宽度影响了降雨落到路面的积水总量,进而对积水水膜厚度产生了影响;超高缓和率则主要使得积水路段、易积水路段增长,从而影响了积水分布的范围。

K-S变换及其电网超谐波时频分析应用

依据FFT→优化窗→IFFT思路,突破线性时频变换的窗函数积分性能桎梏,实现高性能优化窗函数的线性时频变换应用,建立新型时频变换算法——K-S变换.对信号x(t)的FFT频谱向量进行频移处理后,与该频移点下Kaiser优化窗的频谱向量进行Hadamard乘积,再将乘积结果进行FFT逆变换(IFFT),构造出K-S变换复时频矩阵,由此获得x(t)的时间-频率-幅值、时间-频率-相位三维信息;给出逆变换的数学推导与局部性质、线性性质和变分辨率特性;0~150 kHz电网的稳态与时变超谐波信号仿真实验表明,K-S变换的时域、频域分辨能力均优于流行的短时傅里叶变换、S变换,具有优良的变分辨率性能;0~40 kHz超谐波信号的实测证明,基于K-S变换的超谐波电压幅值测量绝对误差均小于0.032 3 V.

改变导叶翼型对水泵水轮机“S”特性的影响

针对水泵水轮机“S”特性区域的不稳定性问题,提出使用改型活动导叶翼型进行性能提升.以某水泵水轮机模型为研究对象,采用SST k-ω湍流模型对水泵水轮机全流道进行三维数值计算,通过对活动导叶翼型的改型设计,得出流量-转速模拟曲线,分析水泵水轮机组“S”特性改善情况.将计算与试验结果进行对比,并对改型活动导叶翼型前后机组的无叶区进行压力脉动分析.结果表明:在保证整体效率依然保持在92%附近的前提下,新的活动导叶翼型对机组的“S”特性依旧具有改善效果;无叶区压力脉动主要是受到活动导叶叶栅区域的分流在此重新聚集影响,并且与转轮叶片的动静相互扰动引起的;改型后的活动导叶降低了无叶区的压力脉动幅值,提升了水泵水轮机运行中的并网稳定性.

基于哨兵函数和S变换的风力机叶片材料损伤特性研究

利用声发射检测技术研究玻璃纤维增强环氧树脂复合材料的损伤特性,在此过程中,采用哨兵函数来表征该材料的损伤程度,并通过S变换和模糊C均值(FCM)聚类来分析声发射信号,从而获得材料的损伤特征。三点弯曲实验结束后对试件断口进行扫描电子显微镜(SEM)拍照来验证,可得:通过对SEM照片的分析得到基体开裂、纤维脱粘、分层破坏、纤维断裂4种损伤模式;对整个声发射事件进行哨兵函数分析,观察到试件在弯曲过程中哨兵函数曲线呈明显下降趋势;对依据哨兵函数划分的不同阶段的信号进行VMD降噪处理,然后采用S变换进行时频分析得到不同损伤的特征频率,最后采用FCM聚类进行验证。结果表明:哨兵函数值的突变可作为材料断裂的预警信号,材料损伤类型的识别可依据S变换的频率分布结果进行确定。

电液3-UPS/S并联稳定平台参数振动特性分析

针对电液3-UPS/S并联稳定平台驱动液压缸的压力脉动所产生的参数振动,建立了稳定平台的参数振动方程并利用多尺度法求解了主共振响应与组合共振响应的一次近似解;分析了主共振与组合共振响应特性以及振动幅值在初始工作空间内的变化规律,最后采用四阶龙格库塔法与模态试验对参数振动模型进行验证。结果表明:数值解与理论解之间的最大误差为4.20%,固有频率理论值与试验值之间的最大误差为4.66%,可验证参数振动模型的正确性。

基于三层B/S架构的企业信息化管理系统的设计

为解决企业管理系统中存在的数据冗余、不一致、数据同步效率低等问题,文章通过引入三层浏览器/服务器(B/S)架构模式,实现了对企业信息化管理系统的研究。该系统的设计主要包含数据库设计、系统管理、生产管理、统计报表等主要功能模块的设计。系统由浏览器向服务器发送请求,服务器接收请求并处理,然后将结果返回给浏览器。系统采用了MVC设计模式,将数据层、业务层和表示层分离开来,提高了可维护性、可扩展性和可重用性。该系统的应用不仅达到了数据远程共享的目的,还实现了对现骨干数据及报表的查询功能,可充分满足企业的信息化管理需求。

Kinematic and Dynamic Characteristics Analysis of Bennett's Linkage

Bennett's linkage is a spatial fourlink linkage,and has an extensive application prospect in the deployable linkages.Its kinematic and dynamic characteristics analysis has a great significance in its synthesis and application. According to the geometrical conditions of Bennett 's linkage,the motion equations are established,and the expressions of angular displacement,angular velocity and angular acceleration of the followers and the displacement,velocity and acceleration of mass center of link are shown. Based on Lagrange's equation,the multi-rigid-body dynamic model of Bennett's linkage is established. In order to solve the reaction forces and moments of joint,screw theory and reciprocal screw method are combined to establish the computing method.The number of equations and unknown reaction forces and moments of joint are equal through adding link deformation equations. The influence of the included angle of adjacent axes on Bennett 's linkage 's kinematic characteristics,the dynamic characteristics and the reaction forces and moments of joint are analyzed.Results show that the included angle of adjacent axes has a great effect on velocity,acceleration,the reaction forces and moments of Bennett's linkage. The change of reaction forces and moments of joint are apparent near the singularity configuration.

Isolation and algae-lysing characteristics of the algicidal bacterium B5

Water blooms have become a worldwide environmental problem. Recently, algicidal bacteria have attracted wide attention as possible agents for inhibiting algal water blooms. In this study, one strain of algicidal bacterium B5 was isolated from activated sludge. On the basis of analysis of its physiological characteristics and 16S rDNA gene sequence, it was identified as Bacillusfusiformis. Its algaelysing characteristics on Microcystis aeruginosa, Chlorella and Scenedesmus were tested. The results showed that： （1） the algicidal bacterium B5 is a Gram-negative bacterium. The 16S rDNA nucleotide sequence homology of strain B5 with 2 strains of B. fusiformis reached 99.86%, so B5 was identified as B. fusiformis; （2） the algal-lysing effects of the algicidal bacterium B5 on M. aeruginosa, Chlorella and Scenedesrnus were pronounced. The initial bacterial and algal cell densities strongly influence the removal rates of chlorophyll-a. The greater the initial bacterial cell density, the faster the degradation of chlorophyll-a. The greater the initial algal cell density, the slower the degradation of chlorophyll-a. When the bacterial cell density was 3.6 × 10^7 cells/ml, nearly 90% of chlorophyll-a was removed. When the chlorophyll-a concentration was less than 550 μg/L, about 70% was removed; （3） the strain B5 lysed algae by secreting metabolites and these metabolites could bear heat treatment.

Multilevel manufacturing system of virtual enterprise based on manufacturing grid and strategies for member enterprise selection and task assignment

In order to improve efficiency of virtual enterprise, a manufacturing grid and multilevel manufacturing system of virtual enterprise is built up. When selecting member enterprises and task assignment based on the manufacturing grid, key activities are assigned to the suitable critical member enterprises by task decomposition, enterprise node searching and characteristic matching of manufacturing resources according to the characteristic matching strategy. By task merger, some ordinary activities are merged with corresponding key activities and assigned to corresponding critical member enterprises. However, the other ordinary activities are assigned to the related ordinary member enterprises with enterprise node searching and characteristic matching of manufacturing resources. Finally, an example of developing the artificial hip joint in the virtual enterprise is used to demonstrate that efficiency of the virtual enterprise is improved by using the manufacturing grid and the proposed strategies for member enterprise selection and task assignment.

水泵水轮机S特性区能量损失及流动特性研究

为了调节电网的稳定性,抽水蓄能电站需要频繁启停和变换工况运行,导致水泵水轮机容易进入S特性区,机组振动增加,并网失败。本文以模型水泵水轮机为研究对象,采用熵产理论详细分析了S特性区不同工况下的能量损失规律,明确了熵产率分布与内部流动结构的关系。结果表明:S特性区内近飞逸工况总熵产最大,约为设计工况的5.1倍,脉动熵产占据的比例接近80%,随着流量的减小,转轮熵产占比逐渐降低,活动导叶和尾水管的熵产占比增加。小流量工况转轮进口靠近下环位置首先出现了明显的漩涡,导致了活动导叶出口和转轮进口的高熵产区,随着流量进一步减小,漩涡逐渐向上冠转移,并且切向速度增大,在转轮进口形成挡水环,阻碍水流进入转轮,在无叶区内出现了环状分布的高熵产区。反水泵工况,水流在低压边与逆时针旋转的叶片撞击,导致水流很难进入叶片内部,形成了大尺度的回流涡结构;双列叶栅内充满大量涡结构,导致活动导叶吸力面的熵产率增大,并且向固定导叶传播。

蒲石河电站水泵水轮机转轮S特性优化研究

针对蒲石河抽水蓄能电站机组启动和甩负荷时水泵水轮机转轮S特性诱发的厂房振动问题,本文基于CFD数值仿真计算和模型试验对机组原9叶片转轮的S特性进行了分析研究,发现在S区工况运行时原转轮进口存在回流区,产成较大的水力损失,从而造成转轮的通流能力下降。基于此发现,本研究提出将9叶片转轮改为7叶片转轮的优化方案。通过对比CFD仿真结果及试验验证,新方案的转轮进口回流现象得到调整,从而有效改善了转轮“S”特性,解决了厂房振动的源头问题。实际工程的应用证明新方案起到了很好的效果,本方案思路可为同类型电站类似问题解决及老旧抽水蓄能电站改造提供参考借鉴。

Similar clinical characteristics of familial and sporadic inflammatory bowel disease in South Korea

AIM: To investigate differences of clinical characteristics and disease courses between familial and sporadic inflammatory bowel disease (IBD) patients.

Effects of Drought Stress Simulated by Polyethylene Glycol on Seed Germination, Root and Seedling Growth, and Seedling Antioxidant Characteristics in Job’s Tears

Two Job’s tears cultivars, yy18-1 (high resistance to drought stress) and yy12-7 (susceptible to drought stress) were used to investigate the responses of seed germination, root and seedling growth, and seedling antioxidant characteristics to drought stress simulated by polyethylene glycol (PEG) 6000 solutions with 0, -0.05, -0.1, -0.15, and -0.2 MPa osmotic potentials. The results showed that the germination energy, germination rate, germination index, root and seedling lengths, root and seedling diameters, root and seedling fresh masses, root and seedling dry masses, and seedling relative water content (RWC) decreased with the decrease of the osmotic potential of PEG 6000 solution. The contents of hydrogen peroxide (H2O2), malondialdehyde (MDA), and proline in seedling increased with the decrease of the osmotic potential of PEG 6000 solution. The activities of peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), and glutathione reductase (GR) in seedling increased and then decreased with the decrease of osmotic potential of PEG 6000 solution. -0.1 MPa was the optimal osmotic potential of PEG 6000 solution simulated drought stress at germination stage for Job’s tears. The proline content and activities of POD and CAT were important mechanisms for the maintenance of drought resistance in Job’s tears seedling.

基于TDLAS的H_(2)S气体材料表面吸附特性研究

在H_(2)S气体浓度在线监测过程中,因其具有粘附性强的特点,容易发生管线吸附,从而导致测量结果存在偏差,尤其在痕量H_(2)S检测过程中表现最为明显,所以开展H_(2)S气体管线材料表面吸附特性研究尤为必要。本文基于可调谐二极管激光吸收光谱技术(TDLAS),设计并搭建了一套H_(2)S浓度在线测定系统,并对该系统进行了测量性能检验,在此基础上进行了H_(2)S在不锈钢材料表面常温吸附特性探究。实验结果表明,所搭建H_(2)S浓度在线测定系统具有稳定性强、检测限低和灵敏度高的特点,利用此系统可以实现痕量H_(2)S浓度的在线连续测定。经过一系列探究试验,证明了H_(2)S在不锈钢材料表面存在明显且稳定的吸附作用,得出了H_(2)S在不锈钢材料表面的单位面积吸附量在10^(14)(个/cm^(2))量级。实验结果可以为痕量硫化氢在线精准测量提供一定参考。

基于射流补水的水泵水轮机S特性改善研究

针对水泵水轮机的“S”特性提出了在导叶顶盖位置无叶区处加装注水管的解决方案,并模拟了注水管安装在不同位置时的“S”特性曲线,分析了加装注水管后转轮区域内流线及转轮各叶道流量的分布规律。结果表明,于导叶顶盖加装注水管可以有效改善转轮内部流动,减轻转轮和导叶内部流动的相互影响,减小叶道涡的尺寸,同时有效缓解了转轮各叶道流量分布不均的现象。在注水管处于无叶区中段和活动导叶附近时,对“S”特性的改善效果明显。

E-Commerce Strategies for Chinese Clothing Enterprises

This paper studies the characteristics and consuming behaviors of the Chinese people. The difficulties in developing e-commerce for enterprises in China are discussed and the practical strategies suitable for China’s clothing enterprises are proposed.