High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO_(2)/N_(2) and CH_(4)/N_(2) separation

Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 kPa.The experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric heat.Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular sieve.Moreover,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) separation.The study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.

Equilibrium, thermodynamic, and kinetic of Cr(VI) adsorption using a modified and unmodified bentonite clay

The capacities of natural and modified Brazilian bentonite samples as adsorbents to remove hexavalent metal chromium were investigated under several conditions in batch and column methods. The raw material, Ca-bentonite, was modified by anchorament of 3-aminopropyltrietoxisilane （APS） and 3,2- aminoethylaminopropyltrimetoxisilane （AEAPS） in the surface of bentonite sample： This type of new occurrence of bentonite is suitable as a raw material for adsorption process. Adsorption behavior of three bentonite types was strongly depending on pH of adsorbate solution, contact time adsorbent/adsorbate, and initial concentration of Cr（VI）. The results were confirmed by column method and reveals that the adsorption process of materials accorded by the Redlich-Peterson, Sips, Dubinin-Radushkevich, and tang- muir isotherm models. The exothermic entbalpic values reflected a favorable energetic process for chro- mium ions anchored in the material surfaces. The negative Gibbs free energy results supported the spontaneity of three adsorption reactions with Cr（VI） ions.

Effect of Mg^(2+) content in ion-exchanged Shengli lignite on its equilibrium adsorption water content and its mechanism

Mg ion-exchanged samples were prepared with acid-washed Shengli lignite.The chemical composition of the ash of the raw sample was determined by X-ray fluorescence.The equilibrium adsorption water contents of samples were determined in a range of relative humidity.The ion-exchange process was characterized by FT-IR,ash content,and p H value.A possible mechanism is proposed for equilibrium adsorption water of ion-exchanged samples at different humidities.The extent of ion-exchange reaction between Mg2+and lignite is controlled by the concentration of Mg2+in Mg SO4solution.The effect of Mg2+on equilibrium adsorption water content varies with relative humidity and content of Mg2+.The factor that controls equilibrium adsorption water content at low relative humidity is water interactions with sorption sites,which are Mg2+–carboxyl group complex.At middle relative humidity capillary force between Mg2+–water clusters Mg+(H2O)nand capillary is more important.At high relative humidity,free water–free water interactions are more significant.

Adsorption Equilibrium of Volatile in Condensed Mode Polyethylene Process

In this paper n-hexane is chosen as typical volatile in condensed mode polymerization process, and the adsorption equilibrium of volatile in polyethylene particles is studied through experiments at different temperatures, pressures and particle diameters. It is found that more adsorbed quantity of volatile at equilibrium can be obtained with lower temperature, higher pressure and smaller particle diameter. Under polymerization conditions, the adsorbed quantity at equilibrium is more strongly affected by temperature than by pressure, and if the diameter distribution of particles is very wide the effect of diameter on the adsorbed quantity must be taken into consideration. With theoretical analyses a model is proposed for calculating the adsorbed quantity of volatile at equilibrium.

Adsorption equilibrium for Z-ligustilide on C18-bonded silica from supercritical carbon dioxide

Adsorption equilibrium is of great importance for the preparative supercritical fluid chromatography(pre-SFC) in defining supercritical adsorption behavior and the industrial amplification.This paper presents adsorption isotherms of Z-ligustilide from supercritical carbon dioxide(SC-CO_2) on C18-bonded silica.Adsorption behavior was studied at 305.15 K,313.15 K and 323.15 K with SC-CO_2 density varying from 0.687 g·cm^(-3) to0.863 g·cm^(-3) with the elution by characteristic points(ECP) method.The adsorption amount of Z-ligustilide from SC-CO_2 on C18-bonded silica decreased with the increasing density of the mobile phase as well as the increasing temperature.Adsorption equilibrium data were fitted by Langmuir and Freundlich isotherm models,and the Langmuir isotherm model performed better for describing the whole adsorption process on the column.The monolayer saturation adsorption capacity of Z-ligustilide is in the range of 3.0 × 10^(-4) mg·cm^(-3) to5.5 × 10^(-4) mg·cm^(-3) with an average value of 4.0 × 10^(-4) mg·cm^(-3).

Adsorption of 2-naphthalenesulfonic acid/sulfuric acid/sulfurous acid from aqueous solution by iron-impregnated weakly basic resin：Equilibrium and model

Commercial grade weakly basic resin D301 was impregnated with iron through a simple method using ferric chloride. Experiments for single, bisolute and trinary competitive adsorption were carried out to investigate the adsorption behavior of 2-naphthalenesulfonic acid(NSA), sulfuric acid and sulfurous acid from their solution at 298 K onto the novel hybrid iron impregnated D301(Fe-D301). Adsorption affinity of NSA on Fe-D301 was found to be much higher than that of sulfuric acid, while adsorption affinity of sulfuric acid was slightly higher than that of sulfurous acid. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The non-ideal competitive adsorbed model coupled with the single-solute adsorption models were used to predict the bisolute and trinary-solute competitive adsorption equilibria. The NICM coupled with the Langmuir model yields the favorable representation of the bisolute and trinary-solute competitive adsorption behavior.

Combined Promoting Effects of Specific Organic Functional Groups and Alumina Surface Characteristics for the Design of a Highly Efficient NiMo/Al_(2)O_(3) Hydrodesulfurization Catalyst

To prepare a highly efficient NiMo/Al_(2)O_(3) hydrodesulfurization catalyst,the combined effects of specific organic functional groups and alumina surface characteristics were investigated.First,the correlation between the surface characteristics of four different alumina and the existing Mo species states was established.It was found that the Mo equilibrium adsorption capacity can be used as a specific descriptor to quantitatively evaluate the changes in surface characteristics of different alumina.A lower Mo equilibrium adsorption capacity for alumina means weaker metal-support interaction and the loaded Mo species are easier to transform into MoS2.However,the Mo-O-Al bonds still exist at the metal-support interface.The introduction of cationic surfactant hecadecyl trimethyl ammonium bromide(CTAB)can further improve Mo species dispersion through electrostatic attraction with Mo anions and interaction of its alkyl chain with the alumina surface;meanwhile,the introduction of ethylenediamine tetraacetic acid(EDTA)can complex with Ni ions to enhance the Ni-promoting effect on Mo.Therefore,the NiMo catalyst designed using alumina with lower Mo equilibrium adsorption capacity and the simultaneous addition of EDTA and CTAB exhibits the highest hydrodesulfurization activity for 4,6-dimethyl dibenzothiophene because of its proper metal-support interaction and more well-dispersed Ni-Mo-S active phases.

Biosorption Equilibrium and Kinetics of Au（Ⅲ） and Cu（Ⅱ） on Magnetotactic Bacteria

Magnetotactic bacteria （MTB） as biosorbents for the adsorption of Au（Ⅲ） and Cu（Ⅱ） ions from aqueous solution have been investigated. The optimum adsorption conditions for both metal ions were the initial pH scope of 1-5.5 for Au（Ⅲ） and 2.0-4.5 for Cu（Ⅱ）, room temperature, biomass concentration of 10.0g.L^-1 and sorotion du-ration more than 10 min. When the initial metal concentration were within 500mg.L^-1, the maximum biosorption capacity of 1.0g of MTB （dry mass basis） for Au（Ⅲ） and Cu（Ⅱ） were calculated as 505.2mg of Au（Ⅲ） and 493.1mg of.Cu（Ⅱ） by Langmuir model in single system, respectively. The isotherm equilibrium of Au（Ⅲ） and Cu（Ⅱ） ions in the Au-Cu binary system reflected a unique phenomenon that the adsorption of Au（Ⅲ） was rein-forced and that of Cu（Ⅱ） prohibited, compared respectively-with their performances in the single metal system.When the,concentration of-Au（Ⅲ） and Cu（Ⅱ）. were below 80mg.L^-1, the waste waterafter MTB treating, wasbelow 1.0mg.L^-1, which is in conformity with Environmental Performance Standards （EPS） of Canada. Besides, all the kinetic data were fitted well to the pseudo second-order kinetic model with a high correlation coefficient （R^2〉0.999）.

Removal of Thiophene from Benzene from Coal Source by Liquid Adsorption on Modified ZSM-5 Synthetic Zeolite

The use of a modified ZSM-5 molecular sieve to remove thiophene from benzene was demonstrated. Adsorption equilibrium experiments were carried out in an enclosed vessel in which a known amount of zeolite was contacted with 20-40 ml of benzene-thiophene solution. The solutions were analyzed by gas chromatography with flame photometric detector. Thiophene was not physically adsorbed on a single molecular layer but mainly adsorbed chemically onto the modified ZSM-5 zeolite adsorbent.

EXCHANGE ADSORPTION EQUILIBRIA OF AMMONIUM ON CATION-VERMICULITE MINERALS

Experiment was designed under different pH and temperature conditions to analysis the NH4+ exchange capacity of Na+-vermiculite,Ca2+-vermiculite and Mg2+-vermiculite clay minerals pre-treated using NaCl,CaCl2 and MgCl2 solutions respectively.The results indicated that the exchange reactions occurred most rapidly at the proceeding 80 minutes and approached to equilibrium by about 120 minutes.The exchange quantity of ammonium on the vermiculite(at initial ammonium concentration of 673mg/L)varied with pH with a peak value of 28.36mg/g on Na+-vermiculite,23.01mg/g on Ca2+-vermiculite,20.14mg/g on Mg2+-vermiculite,18.04mg/g on natural vermiculite at pH 7.The exchange and adsorption isotherm of NH4+ on cation-vermiculite can be described by Langmuir equation.

Single and Binary Dye Adsorption of Methylene Blue and Methyl Orange in Alcohol Aqueous Solution via Rice Husk Based Activated Carbon:Kinetics and Equilibrium Studies

The present work was mainly focused on the single and binary adsorption of methylene blue(MB)and methyl orange(MO)from alcohol aqueous solution over rice husk based activated carbon(RHAC).The study of single dye adsorption equilibrium experiments found that the Langmuir adsorption model was consistent with the adsorption behavior of RHAC on MB and MO,indicating that it was a single layer adsorption.The adsorption behavior con-formed to the pscudo-second-order kinetic model.The binary dye adsorption experiments showed that the Lang-muir-Freundlich model could be applied to describe the adsorption behavior of RHAC on MB and MO.Comparation with the single dye system,the adsorption capacity on the binary dye system was larger,and there was"competitive adsorption"and"synergistic adsorption"effects existed.Meanwhile,the pseudo-second-order kinetic model also fit for the binary dye adsorption behavior.

Removal of diclofenac from aqueous solution with multi-walled carbon nanotubes modified by nitric acid

Modified multi-walled carbon nanotubes(MWCNTs) were used as adsorbents for removal of diclofenac. The reaction conditions were examined. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models were applied to determine appropriate equilibrium expression. The results show that the experimental data fit the Freundlich equation well. Thermodynamic parameters show that the adsorption process is spontaneous and exothermic. The kinetic study indicates that the adsorption of diclofenac can be well described with the pseudo-second-order kinetic model and the process is controlled by multiple steps.

Sono-assisted preparation of magnetic ferroferric oxide/graphene oxide nanoparticles and application on dye removal

A simple ultrasound-assisted co-precipitation method was developed to prepare ferroferric oxide/graphene oxide magnetic nanoparticles(Fe_3O_4/CO MNPs).The hysteresis loop of Fe_3O_4/GO MNPs demonstrated that the sample was typical of superparamagnetic material.The samples were characterized by transmission electron microscope,and it is found that the particles are of small size.The Fe_3O_4/GO MNPs were further used as an adsorbent to remove Rhodamine B.The effects of initial pH of the solution,the dosage of adsorbent,temperature,contact time and the presence of interfering dyes on adsorption performance were investigated as well.The adsorption equilibrium and kinetics data were fitted well with the Freundlich isotherm and the pseudosecond-order kinetic model respectively.The adsorption process followed intra-particle diffusion model with more than one process affecting the adsorption of Rhodamine B.And the adsorption process was endothermic in nature.Furthermore,the magnetic composite with a high adsorption capacity of Rhodamine B could be effectively and simply separated using an external magnetic field.And the used particles could be regenerated and recycled easily.The magnetic composite could find potential applications for the removal of dye pollutants.

A STUDY ABOUT SOIL WATER CHARACTERISTIC,CONDUCTIVITY OF WATER AND EQUILIBRIUM ADSORPTION OF CUPRIC ION IN SOIL——A UTILITY EQUIPMENT USED IN SOIL SCIENCE AND ITS ILLUSTRATION OF USE

A utility equipment used in soil science is designed and installed.The equipment can be used in research pro- grams of soil water and solute transport.Pressure in pressure chamber of the equipment in which a tested soil sam- ple is laid can be adjusted exactly so that we can determine the water content of soil sample.With the equipment we can not only study the problems related water movement in soil but also measure some solute,such as cadmi- um,plumbum and so on,adsorption on surface of soil in saturated and unsaturated state.As an illustration of the use of the equipment,we give the isothermal of cupric ion adsorption in soil.This equipment can be used in the re- search work and application of soil science.

Adsorption behaviors of strontium using macroporous silica based hexagonal tungsten oxide

A novel macroporous silica-based hexagonal tungsten oxide （h-WO3/SiO2） with exchangeable sodium cations located in hex- agonal tunnel structure was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate with 1 mol/L HCl solution. Utilization of the h-WO3/SiO2 adsorbent to remove aqueous strontium was investigated under the condition of various pH values, contact time, the initial concentration of metal ions, salt ion concentration, and coexisting ions. According to the experimental data, Sr2＋ adsorption equilibrium was achieved within 15 min in acidic solution, and the maximum removal ca- pacity of Sr2＋ occurred at pH 4. The kinetic adsorption of Sr2＋ on h-WO3/SiO2 was controlled by pseudo second-order model, and the saturated adsorption of Sr2＋ on h-WO3/SiO2 was better described by Langmuir and Redlich-Peterson isotherm models compared with the Freundlich isotherm model. The distribution coefficient of St2＋ was more than 2000 cm3/g in the presence of Ca2＋, Mg2＋, La3＋, and Eu3＋, indicating that the h-WO3/SiO2 showed excellent selectivity towards Sr2＋ in pH 4.

Selective removal of phenol by spherical particles of α-,β- and γ-cyclodextrin polymers： kinetics and isothermal equilibrium

Spherical particles of α-,β- and γ-cyclodextrin （CD） polymers to efficiently remove phenol from waste water were prepared by reverse suspension polymerization with epichlorohydrin as crosslinker in liquid paraffin. By controlling the amounts of crosslinker and water, well- defined spherical polymer particles with controllable size were obtained. Due to the selective inclusion associations between CD groups and phenol, these CD spherical polymer particles were demonstrated to be ideal candidates for removal of phenol. Among them β-CD polymer particles showed the best performance. The kinetics and isothermal equilibrium models were used to fit the experimental data of phenol removal from aqueous solution using these CD polymer particles. It was found that the kinetics followed the Ho and Mckay equation, suggesting that the adsorption process of phenol was controlled by diffusion and the host-guest interaction between CD and phenol. Equilibrium isothermal data can be well fitted by the Freundlich equation. The negative free energy change indicated the spontaneous nature of adsorption of phenol by α-,β- and γ-CD spherical polymer particles, while the lowest free energy for β-CD polymer reflected its best adsorption ability, compared to α- and γ- CD polymer particles.

Strong enhancement on dye photocatalytic degradation by ball-milled TiO2:A study of cationic and anionic dyes

TiO2 particles with desirable properties were produced by undergoing specific durations of ball milling.Characterizations of the TiO2 particles before and after ball milling were investigated via X-ray diffraction（XRD）, Brunauer-Emmett-Teller（BET）, particle size analysis, zeta potential, and scanning electron microscope（SEM）. The equilibrium adsorption data were well fitted to Langmuir, Freundlich, and Dubinin-Radushkevich（D-R） isotherms. Compared to the as-received TiO2（mean particle size d150= 0.78μm, specific surface area = 88.17 m^2g-1, pore volume = 0.41 cm^3g-1）, the 60 min ballmilled TiO2（d50= 0.55 μm, specific surface area = 99.48 m2g-1, pore volume = 0.48 cm3g-1） enhanced the adsorption quantity of congo red and methylene blue from 10.4 mg g-1to 13.6 mg g-1, and from17.0 mg g-1to 22.2 mg g-1, respectively; and also improved the kinetic rates from k = 0.1325 to 0.2193, and k = 0.0944 to 0.1553, respectively. Dye adsorption and degradation efficiency of congo red was enhanced in acidic p H range（2–5.14）, and methylene blue was enhanced in alkaline p H range（7.58–12）.

Using a novel adsorbent macrocyclic compound cucurbit[8]uril for Pb^(2+) removal from aqueous solution

In this study, cucurbit[8]uril （CB[8]） was utilized as a kind of new adsorbent to remove Pb^2＋ ions from aqueous solution. With the solution pH increased from 2 to 6, the removal efficiency of adsorption increased from 55.6% to 74.5%correspondingly. The uptake of Pb^2＋ increased rapidly in the initial 30 min, and then the adsorption rate became slower. The Pseudo-second order model could be used to interpret the adsorption kinetics satisfactorily; and the rate determining step in Pb^2＋ adsorption onto CB[8] was the external mass transfer step. Equilibrium isotherm study reveals that the Langmuir model gave a better fitting result than Freundlich model. The maximum adsorption capacity calculated by the Langmuir model was 152.67 mg/g for 298 K, 149.70 mg/g for 313 K and 136.42 mg/g for 323 K, respectively. The adsorption is a spontaneous process of exothermic nature. The effect of the adsorbent dosage and the influences of solution pH and co-existing cations were also investigated. The CB[8] was synthesized and characterized by 1H NMR, IR, ESI-MS spectra, SEM-EDAX, Zeta-potential and BET-analysis. The adsorption mechanism was due to the coordination between CB[8] molecule and Pb^2＋ ions.

Effect of textural property of coconut shell-based activated carbon on desorption activation energy of benzothiophene

In this work,the effect of the textural property of activated carbons on desorption activation energy and adsorption capacity for benzothiophene(BT)was investigated.BET surface areas and the textural parameters of three kinds of the activated carbons,namely SY-6,SY-13 and SY-19,were measured with an ASAP 2010 instrument.The desorption activation energies of BT on the activated carbons were determined by temperature-programmed desorption(TPD).Static adsorption experiments were carried out to determine the isotherms of BT on the activated carbons.The influence of the textural property of the activated carbons on desorption activation energy and the adsorption capacity for BT was discussed.Results showed that the BET surface areas of the activated carbons,SY-6,SY-13 and SY-19 were 1106,1070 and 689 m2·g^(-1),respectively,and their average pore diameters were 1.96,2.58 and 2.16 nm,respectively.The TPD results indicated that the desorption activation energy of BT on the activated carbons,SY-6,SY-19 and SY-13 were 58.84,53.02 and 42.57 KJ/mol,respectively.The isotherms showed that the amount of BT adsorbed on the activated carbons followed the order of SY-6>SY-19>SY-13.The smaller the average pore diameter of the activated carbon,the stronger its adsorption for BT and the higher the activation energy required for BT desorption on its surface.The Freundlich adsorption isotherm model can be properly used to formulate the adsorption behavior of BT on the activated carbons.