Dielectric Relaxation of Adsorbed Water in Wood Cell Wall under Equilibrium and Non-Equilibrium State

This article summarized systematically the previous investigations on t he dielectric relaxation of wood, the main substances and extractives in wood at oven-dry state, and the dielectric relaxation based on the adsorbed water in w o od cell wall under equilibrium and non-equilibrium state. Moreover, some expect a tions for future research were proposed on this basis. The purpose of this artic le is to provide other researchers an overall understanding about the research i n this region, and further to promote the research onto a new and higher level.

Information-Based Numerical Distances between Equilibrium and Non-Equilibrium States

We consider a typical master equation describing thermal time-evolution. In parallel, we also consider a quasi static canonical description of the same problem. We are able to devise a way of numerically comparing these two treatments and concoct a distance-measure between them. In this way, one is in a position to know how far or close equilibrium and off-equilibrium can get. The first, rather surprising observation, is that our systems lose structural details as N grows. Also, the time-evolution of the distance between the two pertinent probability distributions is quite sensitive to the heating-cooling process.

A Generalized Statement of Highest-Entropy Principle for Stable Equilibrium and Non-Equilibrium in Many-Particle Systems

Among all statements of Second Law, the existence and uniqueness of stable equilibrium, for each given value of energy content and composition of constituents of any system, have been adopted to define thermodynamic entropy by means of the impossibility of Perpetual Motion Machine of the Second Kind (PMM2) which is a consequence of the Second Law. Equality of temperature, chemical potential and pressure in many-particle systems are proved to be necessary conditions for the stable equilibrium. The proofs assume the stable equilibrium and derive, by means of the Highest-Entropy Principle, equality of temperature, chemical potential and pressure as a consequence. A first novelty of the present research is to demonstrate that equality is also a sufficient condition, in addition to necessity, for stable equilibrium implying that stable equilibrium is a condition also necessary, in addition to sufficiency, for equality of temperature potential and pressure addressed to as generalized potential. The second novelty is that the proof of sufficiency of equality, or necessity of stable equilibrium, is achieved by means of a generalization of entropy property, derived from a generalized definition of exergy, both being state and additive properties accounting for heat, mass and work interactions of the system underpinning the definition of Highest-Generalized-Entropy Principle adopted in the proof.

Preparation of Laser Cladding Coating Undercooling Cu-based Alloy and Co on Non-equilibrium Solidification Structure

The effect of the gradient content of Co element on the solidification process of Cu-based alloy under deep under cooling conditions was explored.The non-equilibrium solidification structure of the under cooled alloy samples were analyzed.It is found that the rapidly solidified alloy has undergone twice grain refinement during the undercooling process.Characterization and significance of the maximum undercooling refinement structure of Cu60Ni35Co5 at T=253 K were analyzed.High-density defects were observed,such as dislocations,stacking faults networks,and twinning structures.The standard FCC diffraction pattern represents that it is still a single-phase structure.Based on the metallographic diagram,EBSD and TEM data analysis,it is illustrated that the occurrence of grain refinement under high undercooling is due to stress induced recrystallization.In addition,the laser cladding technology is used to coat Co-based alloy(Stellite12) coating on 304 stainless steel substrate;the microstructure of the coating cross-section was analyzed.It was found that the microstructure of the cross-section is presented as columnar crystals,planar crystals,and disordered growth direction,so that the coating has better hardness and wear resistance.By electrochemical corrosion of the substrate and coating,it can be seen that the Co and Cr elements present in the coating are more likely to form a dense passivation film,which improved the corrosion resistance of the coating.

Effect of Co on Solidification Characteristics and Microstructural Transformation of Non-equilibrium Solidified Cu-Ni Alloys

Non-equilibrium solidification structures of Cu55Ni45 and Cu55Ni43Co2 alloys were prepared by the molten glass purification cycle superheating method.The variation of the recalescence phenomenon with the degree of undercooling in the rapid solidification process was investigated using an infrared thermometer.The addition of the Co element affected the evolution of the recalescence phenomenon in Cu-Ni alloys.The images of the solid-liquid interface migration during the rapid solidification of supercooled melts were captured by using a high-speed camera.The solidification rate of Cu-Ni alloys,with the addition of Co elements,was explored.Finally,the grain refinement structure with low supercooling was characterised using electron backscatter diffraction(EBSD).The effect of Co on the microstructural evolution during nonequilibrium solidification of Cu-Ni alloys under conditions of small supercooling is investigated by comparing the microstructures of Cu55Ni45 and Cu55Ni43Co2 alloys.The experimental results show that the addition of a small amount of Co weakens the recalescence behaviour of the Cu55Ni45 alloy and significantly reduces the thermal strain in the rapid solidification phase.In the rapid solidification phase,the thermal strain is greatly reduced,and there is a significant increase in the characteristic undercooling degree.Furthermore,the addition of Co and the reduction of Cu not only result in a lower solidification rate of the alloy,but also contribute to the homogenisation of the grain size.

An analytical transient coal permeability model:Sorption non-equilibrium index-based swelling switch

Long-term permeability experiments have indicated that sorption-induced swelling can switch from internal to bulk depending on the evolutive sorption status.However,this sorption swelling switch mechanism has not been considered in current analytical permeability models.This study introduces a normalized sorption non-equilibrium index(SNEI)to characterize the sorption status,quantify the dynamical variations of matrix swelling accumulation and internal swelling partition,and formulate the sorption swelling switch model.The incorporation of this index into the extended total effective stress concept leads to an analytical transient coal permeability model.Model results show that the sorption swelling switch itself results in the permeability switch under stress-constrained conditions,while the confined bulk swelling suppresses the permeability recovery to the continuous reduction under displacement-constrained conditions.Model verifications show that current experimental observations correspond to the early stages of the transient process,and they could be extended to the whole process with these models.This study demonstrates the importance of the sorption swelling switch in determining permeability evolution using simple boundary conditions.It provides new insights into experimentally revealing the sorption swelling switch in the future,and underscores the requirement of a rigorous model for complex coupled processes in large-scale coal seams.

Radiative heat transfer analysis of a concave porous fin under the local thermal non-equilibrium condition:application of the clique polynomial method and physics-informed neural networks

The heat transfer through a concave permeable fin is analyzed by the local thermal non-equilibrium(LTNE)model.The governing dimensional temperature equations for the solid and fluid phases of the porous extended surface are modeled,and then are nondimensionalized by suitable dimensionless terms.Further,the obtained nondimensional equations are solved by the clique polynomial method(CPM).The effects of several dimensionless parameters on the fin's thermal profiles are shown by graphical illustrations.Additionally,the current study implements deep neural structures to solve physics-governed coupled equations,and the best-suited hyperparameters are attained by comparison with various network combinations.The results of the CPM and physicsinformed neural network(PINN)exhibit good agreement,signifying that both methods effectively solve the thermal modeling problem.

Capturing the non-equilibrium state in light–matter–free-electron interactions through ultrafast transmission electron microscopy

Ultrafast transmission electron microscope(UTEM) with the multimodality of time-resolved diffraction, imaging,and spectroscopy provides a unique platform to reveal the fundamental features associated with the interaction between free electrons and matter. In this review, we summarize the principles, instrumentation, and recent developments of the UTEM and its applications in capturing dynamic processes and non-equilibrium transient states. The combination of the transmission electron microscope with a femtosecond laser via the pump–probe method guarantees the high spatiotemporal resolution, allowing the investigation of the transient process in real, reciprocal and energy spaces. Ultrafast structural dynamics can be studied by diffraction and imaging methods, revealing the coherent acoustic phonon generation and photoinduced phase transition process. In the energy dimension, time-resolved electron energy-loss spectroscopy enables the examination of the intrinsic electronic dynamics of materials, while the photon-induced near-field electron microscopy extends the application of the UTEM to the imaging of optical near fields with high real-space resolution. It is noted that light–free-electron interactions have the ability to shape electron wave packets in both longitudinal and transverse directions, showing the potential application in the generation of attosecond electron pulses and vortex electron beams.

Using fracture mechanics method to analyze the failure mechanism and equilibrium equation of interfacial loess-mudstone landslides

Loess-mudstone landslides are common in the Loess Plateau.Investigations into the mechanical theory of loess-mudstone landslides have become a challenging undertaking due to the distinctive interfacial properties of loess-mudstone and the unique water sensitivity characteristics of mudstone.Hence,it is imperative to develop innovative mechanical models and mathematical equations specifically tailored to loess-mudstone landslides.In this study,we analyze the fracture mechanism of the loess-mudstone sliding zone using plastic fracture mechanics and develop a unique fracture yield model.To calculate the energy release rate during the expansion of the loess-mudstone interface tip region,the shear fracture energy G is applied,which reflects both the yield failure criterion and the fracture failure criterion.To better understand the instability mechanism of loess-mudstone landslides,equilibrium equations based on G are established for tractive,compressive,and tensile loess-mudstone landslides.Based on the equilibrium equation,the critical length Lc of the sliding zone can be used for the safety evaluation of loess-mudstone landslides.In this way,this study proposes a new method for determining the failure mechanism and equilibrium equation of loessmudstone landslides,which resolves their starting mechanism,mechanical equilibrium equations,and safety evaluation indicators,thus justifying the scientific significance and practical value of this research.

Effects of spatial heterogeneity on pseudo-static stability of coal mine overburden dump slope,using random limit equilibrium and random finite element methods:A comparative study

Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump materials is imperative for an adequate evaluation of the seismic stability of OB dump slopes.In this study,pseudo-static seismic stability analyses are carried out for an OB dump slope by considering the material parameters obtained from an insitu field investigation.Spatial heterogeneity is simulated through use of the random finite element method(RFEM)and the random limit equilibrium method(RLEM)and a comparative study is presented.Combinations of horizontal and vertical spatial correlation lengths were considered for simulating isotropic and anisotropic random fields within the OB dump slope.Seismic performances of the slope have been reported through the probability of failure and reliability index.It was observed that the RLEM approach overestimates failure probability(P_(f))by considering seismic stability with spatial heterogeneity.The P_(f)was observed to increase with an increase in the coefficient of variation of friction angle of the dump materials.Further,it was inferred that the RLEM approach may not be adequately applicable for assessing the seismic stability of an OB dump slope for a horizontal seismic coefficient that is more than or equal to 0.1.

Non-equilibrium Vibration and Diagnosis Analysis of A Rainstorm

The rainstorm weather from July 15,2010 to July 18,2010 is researched by diagnosis analysis method.The results suggest that in the strong and lasting period,the upward air current in the basin is prevail and is above 300 hPa.The convergence layer during strong rainstorm period is not thick.The convergence movement of air current is under 500 hPa.In this rainstorm process,the positive vortex maximum value center of the lower layer of convection layer is perfectly corresponding to rainstorm zone.The air current convergence and divergence intensity is one magnitude larger than the turning intensity.Flux plays a leading role in the system changes process;the non-equilibrium value of the low layer of convection layer during the strong rainstorm period U<0.Strong non-equilibrium is favorable for the movement of convergence.The non-equilibrium value of the high layer of convection layer U>0,and it stimulates the divergence movement of high layer.The divergence of high layer pushes the convergence of the lower layer and thus forms strong upward movement.

NUMERICAL SIMULATION OF THERMAL NON-EQUILIBRIUM RADIATION ON UNSTRUCTURED GRIDS

A numerical method is developed based on an unstructured mesh to compute an ionized hypersonic flowfield with radiation in the thermo-chemical nonequilibrium. The flowfield is described by multi-species NavierStocks equations. The chemical model includes 11 species （O2, N2, O, N, NO, NO^＋ , N^＋ , O^＋, N2^＋ , O2^＋, e^- ） and 20 reactions. For simulating the thermal non-equilibrium effect, the two-temperature model is considered. The finite volume method （FVM） used for the spatial and directional discretization of radiative transfer equation（RTE） is described for unstructured grids. The numerical code can handle different kinds of species and radiative bands in a gas thermodynamicly described by two temperatures. In particular, the Delta, Epsilon, Beta prime, and Gamma prime bands of NO are choosen and the distribution of the radiation intensity is obtained.

Discussion on the Non-Equilibrium Phase of the Gliding Arc Plasma Driven by the Transverse Magnetic Field

a gliding arc driven by the transverse magnetic field was ignited between the electrodes with a complicated shape at atmospheric pressure and a non-equilibrium plasma was gencrated. Under our experimental conditions, a phenomenon was clearly observed where the arc power decreased with the increase in arc voltage. As the arc voltage was higher than 3.375 kV, the are power acquired from the power supply decreased, and the arc plasma began to switch to a non-equilibrium phase. The existence of the non-equilibrium arc plasma was very short, about 10 ms in one gliding arc discharge cycle.

Critical anomaly and finite size scaling of the self-diffusion coefficient for Lennard Jones fluids by non-equilibrium molecular dynamic simulation

We use non-equilibrium molecular dynamics simulations to calculate the self-diffusion coefficient, D, of a Lennard Jones fluid over a wide density and temperature range. The change in self-diffusion coefficient with temperature decreases by increasing density. For density ρ＊ = ρσ3 = 0.84 we observe a peak at the value of the self-diffusion coefficient and the critical temperature T＊ = kT/ε = 1.25. The value of the self-diffusion coefficient strongly depends on system size. The data of the self-diffusion coefficient are fitted to a simple analytic relation based on hydrodynamic arguments. This correction scales as N-α, where α is an adjustable parameter and N is the number of particles. It is observed that the values of a 〈 1 provide quite a good correction to the simulation data. The system size dependence is very strong for lower densities, but it is not as strong for higher densities. The self-diffusion coefficient calculated with non-equilibrium molecular dynamic simulations at different temperatures and densities is in good agreement with other calculations fronl the literature.

NON-EQUILIBRIUM SOLUTE SEGREGATION TO AUSTENITIC GRAIN BOUNDARY IN FERRUM-NICKLE ALLOY

The development of non-equilibrium segregation of boron at grain boundaries in Fe-4 0%Ni alloy during continuous cooling process was experimentally observed with boron Particle Tracking Autoradiography (PTA) and Transmission Electron Microscopy (TEM,). The samples with 10ppm boron were cooled at 2℃/s to 1040, 980, 920, 860, 780 and 640℃ respectively after pre-heat treatment of 1150℃ for 15mm with a Gleeble-1500 heat simulating machine, then water quenched to room temperature. The width of segregation layer and boron depletion zone, rich factor and other parameters were measured by a special image analysis system. The experimental results of PTA show that the grain boundary segregation of boron during cooling process is a dynamic process and the development of the non-equilibrium segregation experiences three stages: first increases rapidly from 1150 to 1040℃, then gently from 1040 to 860℃, and rapidly again from 860℃ to 640℃. The width of boron depletion zone increases from about 11μm at 1040℃ to 26μm at 640℃. TEM observation shows that boron precipitates exist at grain boundaries when the samples are cooled to below 860℃. The experimental phenomena are briefly discussed.

Effect of La_2O_3/γAl_2O_3 Catalyst on the Activation of CH_4 and CO_2 to C_02 Hydrocarbons under Non-equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocarbons under non-equilibrium plasma, methane conversion was decreased, but selectivity of C2 hydrocarbons was increased when using La2O3/?Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/?Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd- La2O3/?Al2O3 was used as catalyst, the major C2 product was ethylene.

Interplay between Micro-Anisotropy and Macro-Isotropy on Evolution of Non-Equilibrium Morphology

Non-equilibrium morphology has received much attention from both scientific and engineering points of view for its intricate pattern selection mechanisms and useful industrial application. Most study of non-equilibrium is about the metal, alloy and other simple system. The complex silicate system is rarely involved. However, silicate is very important in geosciences and ceramic industry. In this paper, two kinds of non-equilibrium crystal morphologies of silicate: dendrite of diopside and spherulite of plagioclase, were introduced. Combining with the other kinds of non-equilibrium morphologies, the characteristics of micro-macro and anisotropy-isotropy of the non-equilibrium morphologies were discussed. Dendrite of diopside is micro- and macro-anisotropic, spherulite of plagioclase is micro-anisotropic, but macro-isotropic, fractal of NH4Cl is also micro-anisotropic, but macro-isotropic, dense-branching morphology (DBM) formed in non-crystalline system is micro-and macro-isotropic. Based on the micro-macro interplay on the pattern formation, it is proposed that the interplay between micro-anisotropy of crystal structure vs macro-isotropy of undercooling in crystal growth system will control the morphological evolution. The nucleation rate related to the anisotropy for the morphological evolution was also discussed. The fact that diopside develops dendrite and plagioclase develop spherulite in our experiment is due to their structural anisotropy difference.

Catalytic Effect of Activated Carbon and Activated Carbon Fiber in Non-Equilibrium Plasma-Based Water Treatment

Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.

Non-equilibrium between ions and electrons inside hot spots from National Ignition Facility experiments

The non-equilibrium between ions and electrons in the hot spot can relax the ignition conditions in inertial confinement fusion[Fan et al.,Phys.Plasmas 23,010703(2016)],and obvious ion-electron non-equilibrium could be observed by our simulations of high-foot implosions when the ion-electron relaxation is enlarged by a factor of 2.On the other hand,in many shots of high-foot implosions on the National Ignition Facility,the observed X-ray enhancement factors due to ablator mixing into the hot spot are less than unity assuming electrons and ions have the same temperature[Meezan et al.,Phys.Plasmas 22,062703(2015)],which is not self-consistent because it can lead to negative ablator mixing into the hot spot.Actually,this non-consistency implies ion-electron non-equilibrium within the hot spot.From our study,we can infer that ion-electron non-equilibrium exists in high-foot implosions and the ion temperature could be~9%larger than the equilibrium temperature in some NIF shots.

Non-equilibrium State Salt-forming Phase Diagram：Utilization of Bittern Resource in High Efficiency

Salt-forming regions for a complex salt-water system in non-equilibrium state of evaporation process are usually different from those in solubility diagrams.To understand the solid-forming region of NaCl and improve the utilization of bittern resources,experiments were carried out to evaporate 20 representative mixture solution samples of Na ^＋,Mg ^2＋ //Cl^-, SO4^2--H2O system with an average evaporation intensity of（1.4±0.4） g·L^-1 ·min^-1（water） at boiling temperature 348 K,and determine the NaCl solid-forming regions in non-equilibrium state.Because of the complexity of salt-forming region,a maximal region and a minimal region were proposed to express the non-equilibrium state salt-forming region with different crystal seed,and a conditional salt-forming region was proposed to present the characteristic region of non-equilibrium salt-forming phase diagram.The areas of the maximal and minimal regions are 2.00 and 1.56 times those in solubility diagram,so it is possible to utilize bittern resources in high efficiency.The recovery rates of NaCl were 99.65%,93.14%,88.57%,72.76%,and 83.68%for six typical bittern sources from Tulantai Salt Lake（China）,Dongtai Salt Lake（China） ,Jilantai Salt Lake（China）,Qarun Salt Lake（Egypt） and seawater,respectively.It is testified that the non-equilibrium state salt-forming phase diagram can be used in industrial processes.