Performance analysis and design of MIMO-OFDM system using concatenated forward error correction codes

This work investigates the performance of various forward error correction codes, by which the MIMO-OFDM system is deployed. To ensure fair investigation, the performance of four modulations, namely, binary phase shift keying(BPSK), quadrature phase shift keying(QPSK), quadrature amplitude modulation(QAM)-16 and QAM-64 with four error correction codes(convolutional code(CC), Reed-Solomon code(RSC)+CC, low density parity check(LDPC)+CC, Turbo+CC) is studied under three channel models(additive white Guassian noise(AWGN), Rayleigh, Rician) and three different antenna configurations(2×2, 2×4, 4×4). The bit error rate(BER) and the peak signal to noise ratio(PSNR) are taken as the measures of performance. The binary data and the color image data are transmitted and the graphs are plotted for various modulations with different channels and error correction codes. Analysis on the performance measures confirm that the Turbo + CC code in 4×4 configurations exhibits better performance.

Quaternion Integers Based Higher Length Cyclic Codes and Their Decoding Algorithm

The decoding algorithm for the correction of errors of arbitrary Mannheim weight has discussed for Lattice constellations and codes from quadratic number fields.Following these lines,the decoding algorithms for the correction of errors of n=p−12 length cyclic codes(C)over quaternion integers of Quaternion Mannheim(QM)weight one up to two coordinates have considered.In continuation,the case of cyclic codes of lengths n=p−12 and 2n−1=p−2 has studied to improve the error correction efficiency.In this study,we present the decoding of cyclic codes of length n=ϕ(p)=p−1 and length 2n−1=2ϕ(p)−1=2p−3(where p is prime integer andϕis Euler phi function)over Hamilton Quaternion integers of Quaternion Mannheim weight for the correction of errors.Furthermore,the error correction capability and code rate tradeoff of these codes are also discussed.Thus,an increase in the length of the cyclic code is achieved along with its better code rate and an adequate error correction capability.

The Influence of Carrier Phase Error on the Performances of Digital Image m-QAM Transmission System

The effect of carrier phase error in digital image transmission system is discussed. Code error rate and SNR with carrier phase error in Gauss white noise channel are calculated, and the transmission system is simulated on computer.

A Self-Terminated Interleaver Design for Turbo Codes

Turbo codes can achieve excellent performance at low signal-to-noise ratio (SNR), but the performance can be severely degraded if no trellis termination is employed. This paper proved that if trellis termination bits were appended to RSC1, trellis of RSC2 could be terminated by designing the interleaver properly, consequently, derived the designing condition of such self-terminated interleaver (STI). Then we presented an algorithm of implementing a kind of STI, which could terminate RSC2 as well on condition that the RSC1 was terminated. We verified the performance of STI for turbo codes by simulation, and the simulation results showed that turbo codes with STI outperformed interleavers that could not terminate RSC2 as well.

Performance analysis of adaptive turbo coded modulation with time delay

The method of data fitting is applied to obtain the BER expression for turbo coded modulation, and a fitting mathematical model is proposed, which resolves the problem that there is no exact BER expression for turbo coded modulation in performance analysis. With the time delay consideration, the performance of BER of adaptive turbo coded modulation is analyzed and simulated. The results show that adaptive turbo coded modulation is very sensitive to time delay. In order to meet the target BER requirement, the total time delay should be less than 0 001/f D.

OPTIMAL PUNCTURING OF TURBO CODES BASED ON ADS CRITERION

Puncturing is the predominant strategy to construct high code rate turbo codes. Puncturing tables are crucial to the performance of punctured turbo codes(PTC). This paper developed a new searching algorithm of optimal puncturing tables based on average distance spectrum(ADS) criterion. Consequently, some optimal puncturing tables were presented as the searching results. Finally, it presented the performance comparison among some optimal and bad puncturing tables by simulation.

On the Performance of Punctured Turbo Codes

Currently puncturing is the predominant strategy to construct high code rate turbo codes. The puncturing period and puncturing patterns, which have important effect on the performance of punctured turbo codes (PTC), yet have not received complete investigations, are addressed in this paper. Proposes on selecting puncturing period and puncturing patterns are presented. Since puncturing will alter the distance spectrum of turbo codes, the performance of PTC needs further consideration. We derive an analytical upper bound for PTC, based on the assumption of uniform puncturing defined in this paper. Finally, we present some numeric results on the performance of PTC.

Construction of protograph LDPC codes with circular generator matrices

The application of protograph low density parity check （LDPC） codes involves the encoding complexity problem. Since the generator matrices are dense, and if the positions of ＂1＂ s are irregularity, the encoder needs to store every ＂1＂ of the generator matrices by using huge chip area. In order to solve this problem, we need to design the protograph LDPC codes with circular generator matrices. A theorem concerning the circulating property of generator matrices of nonsingular protograph LDPC codes is proposed. The circulating property of generator matrix of nonsingular protograph LDPC codes can be obtained from the corresponding quasi-cyclic parity check matrix. This paper gives a scheme of constructing protograph LDPC codes with circulating generator matrices, and it reveals that the fast encoding algorithm of protograph LDPC codes has lower encoding complexity under the condition of the proposed theorem. Simulation results in ad- ditive white Gaussian noise （AWGN） channels show that the bit error rate （BER） performance of the designed codes based on the proposed theorem is much better than that of GB20600 LDPC codes and Tanner LDPC codes.

Differential modulation based on space-time block codes

A differential modulation scheme using space-time block codes is put forward. Compared with other schemes, our scheme has lower computational complexity and has a simpler decoder. In the case of three or four transmitter antennas, our scheme has a higher rate a higher coding gain and a lower bit error rate for a given rate. Then we made simulations for space-time block codes as well as group codes in the case of two, three, four and five transmit antennas. The simulations prove that using two transmit antennas, one receive antenna and code rate of 4 bits/s/Hz, the differential STBC method outperform the differential group codes method by 4 dB. Useing three, four and five transmit antennas, one receive antenna, and code rate of 3 bits/s/Hz are adopted, the differential STBC method outperform the differential group codes method by 5 dB, 6. 5 dB and 7 dB, respectively. In other words, the differential modulation scheme based on space-time block code is better than the corresponding differential modulation scheme

Performance of Cross-Layer Design with Power Allocation in Space-Time Coded MIMO Systems

A cross-layer design(CLD)scheme with combination of power allocation,adaptive modulation(AM)and automatic repeat request(ARQ)is presented for space-time coded MIMO system under imperfect feedback,and the corresponding system performance is investigated in a Rayleigh fading channel.Based on imperfect feedback information,a suboptimal power allocation(PA)scheme is derived to maximize the average spectral efficiency(SE)of the system.The scheme is based on a so-called compressed SNR criterion,and has a closed-form expression for positive power allocation,thus being computationally efficient.Moreover,it can improve SE of the presented CLD.Besides,due to better approximation,it obtains the performance close to the existing optimal approach which requires numerical search.Simulation results show that the proposed CLD with PA can achieve higher SE than the conventional CLD with equal power allocation scheme,and has almost the same performance as CLD with optimal PA.However,it has lower calculation complexity.

Application of Adaptive Coded Modulation Technology in UAV Data Link

UAV data link has been considered as an important part of UAV communication system, through which the UAV could communicate with warships. However, constant coding and modulation scheme that UAV adopts does not make full use of the channel capacity when UAV communicates with warships in a good channel environment. In order to improve channel capacity and spectral efficiency, adaptive coded modulation technology is studied. Based on maritime channel model, SNR estimation technology and adaptive threshold determination technology, the simulation of UAV data link communication is carried out in this paper. Theoretic analysis and simulation results show that according to changes in maritime channel state, UAV can dynamically adjust the adaptive coded modulation scheme on the condition of meeting target Bit-Error-Rate (BER), the maximum amount of data transfer is non-adaptive systems three times.

BER Performance of Space-Time Coded MMSE DFE for Wideband Code Division Multiple Access (WCDMA)

In recent times, there has been growing interests in integration of voice, data and video traffic in wireless communication networks. With these growing interests, WCDMA has immerged as an attractive access technique. The performance of WCDMA system is deteriorated in presence of multipath fading environment. The paper presents space-time coded minimum mean square error (MMSE) Decision Feedback Equalizer (DFE) for wideband code division multiple access (WCDMA) in a frequency selective channel. The filter coefficients in MMSE DFE are optimized to suppress noise, intersymbol interference (ISI), and multiple access interference (MAI) with reasonable system complexity. For the above structure, we have presented the estimation of BER for a MMSE DFE using computer simulation experiments. The simulation includes the effects of additive white Gaussian noise, multipath fading and multiple access interference (MAI). Furthermore, the performance is compared with standard linear equalizer (LE) and RAKE receiver. Numerical and simulation results show that the MMSE DFE exhibits significant performance improvement over the standard linear equalizer (LE) and RAKE receiver.

基于可逆元胞自动机加密的扩展码索引调制方案

针对直接序列扩频系统伪随机(Pseudo Noise,PN)码资源有限且码索引调制系统误码率性能下降的问题,提出了一种基于可逆的初等元胞自动机加密的扩展码索引调制方案。首先,针对PN码资源有限的问题,提出使用混沌规则的初等元胞自动机对PN码进行迭代的方案,从而实现扩展PN码的目的;其次,针对码索引调制误码率性能下降的问题,提出了一种可逆元胞自动机加密的码索引调制方案,在发射端,把信息比特切割成调制比特和映射比特,并分别映射为调制符号和扩频码索引,使用对应索引的扩频码对同相分量进行扩频,同时使用可逆元胞自动机对映射比特进行加密,加密后的映射比特为调制符号的正交分量选取对应索引的扩频码进行扩频。仿真与分析结果表明,在相同频谱效率条件下,在加性高斯白噪声信道中,当误码率为10-5时,扩展码索引调制方案的误码率性能优于码索引调制和广义码索引调制方案约2~4 dB,优于非正交码移键控码索引调制方案约0.5 dB。

EFFICIENT DESIGN OF ANTI-JAMMING RATELESS CODING IN COGNITIVE OFDM

Efficient anti-jamming rateless coding based on cognitive Orthogonal Frequency Division Multiplexing (OFDM) modulation in Cognitive Radio Network (CRN) is mainly discussed. Rateless coding with small redundancy and low complexity is presented, and the optimal design methods of building rateless codes are also proposed. In CRN, anti-jamming rateless coding could recover the lost packets in parallel channels of cognitive OFDM, thus it protects Secondary Users (SUs) from the in-terference by Primary Users (PUs) efficiently. Frame Error Rate (FER) and throughput performance of SU employing anti-jamming rateless coding are analyzed in detail. Performance comparison between rateless coding and piecewise coding are also presented. It is shown that, anti-jamming rateless coding provides low FER and Word Error Rate (WER) performance with uniform sub-channel selection. Meanwhile, it is also verified that, in higher jamming rate and longer code redundancy scenario, rateless coding method could achieve better FER and throughput performance than another anti-jamming coding schemes.

Neural-Polar码:一种基于深度学习的新型信道编码方案

为应对新型移动通信系统智能性的需求以及在难以进行人工建模的复杂信道环境下进行可靠通信的问题,基于Polar码的编译码递归结构提出一种新型神经网络信道编码方案,即Neural-Polar码。该方案利用神经网络将Polar码编译码递归结构中父、子节点间的线性映射变成非线性映射,引入快速连续抵消(successive cancellation, SC)译码的思想,解决在完全二叉树上构建Neural-Polar码造成网络结构过大的问题。仿真实验表明,Neural-Polar码可以获得优于经典SC译码算法的误码率(bit error rate, BER)和误块率(block error rate, BLER)性能,对网络的联合训练使得Neural-Polar码能够自动学习信道特性,具有更好的信道适应性和鲁棒性。Neural-Polar码将传统的对复杂信道进行人工建模分析的难题交给机器,充分体现出其编译码的智能性。

Performance Analysis of Multiple User Optical Code Division Multiple Access

In this paper, we discuss and analyze an optical code division multiple access for multiple user system. Media access control implementation has been considered. For fulfilling the huge need of bandwidth services, technology tends to move to optical networks and three major optical systems come into existence. Code division of the optical network is most used and real concept interacted with users up to this time. Optical code division multiple access provides complete spectrum to each and every user for the time of accessing the channel. In the paper, we have proposed network architecture with optical encoder and decoder along with optical code translator which is supporting multiple user systems. We integrate the code translator with encoding and decoding of optical code to use the optical network at full extent and present the simulation validation results of 6 Gb/s 3-hop transmission by use of proposed architecture. Further, we have implemented experimentation with 6 users 3 Gb/s optical code division multiple access network. Through simulation structure, it is shown that the combination of encoding with EDFA in multiple user environment system provides improvement in bit error rate and also improves the multiple access interference. With increase of users in the network, MAI value increases and our proposed scheme controls interference in the network.

高速光纤通信系统中的码型调制与误码率优化研究

随着信息技术的飞速发展,高速光纤通信系统已成为信息社会的基础设施之一,其传输速度和传输距离的不断提升对码型调制技术和误码率控制提出了更高要求。随着传输速率的增加,光纤中的色散效应、非线性效应以及噪声干扰等问题日益凸显,导致误码率上升,严重影响了通信质量。因此本文探讨了高速光纤通信系统中的码型调制技术与误码率优化策略,以期能够有效降低误码率、推动光纤通信技术的发展。

基于Gamma-Gamma湍流信道下的卷积码性能研究

为了研究不同码型的卷积码在水下湍流信道中的误码率(BER)性能,采用接受-拒绝采样模拟湍流信道乘性干扰,并选择二进制相移键控(BPSK)调制方式,建立Gamma-Gamma湍流信道通信系统仿真模型。仿真结果表明:在不同强度的湍流信道中,采用卷积码编码均能提升系统的BER性能;卷积码的码率越小,系统BER性能提升越显著;随着信噪比(SNR)增大,记忆深度越长,系统BER下降速度越快;采用软译码比采用硬译码时增益至少提升2.82 d B;卷积码的解码不仅受当前信息的影响,还与之前的码元信息有关。