Identification of the Asymmetric Transmission Error and Gear Mesh Dynamic Parameters using Full-Spectrum Responses in a Geared-Rotor System

A dominant source of vibration in geared-rotor systems is the gear mesh fault parameters.They include the asymmetric transmission error(TE),phases of TE,the gear mesh stiffness,the gear mesh damping,and the gear runouts.The present work deals with the experimental identification of the aforementioned parameters.A mathematical model of a geared-rotor system has been developed using Lagrangian dynamics.Equations of motion are transformed into the frequency domain using the full-spectrum response analysis.These transformed equations are used to develop an identification algorithm(IA)based on least-squares fit to estimate the TE and gear mesh dynamic parameters.The system IA is initially verified using numerical simulations.The robustness of the algorithm is checked by introducing white Gaussian noise in the simulated responses.A geared-rotor experimental rig was developed and used to measure responses at gear locations in two orthogonal directions.Measured responses are transformed in the frequency domain using the full-spectrum analysis and used in the present novel IA to identify the gear parameters.The identified parameters are validated by comparing the numerically generated full-spectrum response using experimentally estimated parameters and that from the experimental rig.

Design of Pinion Machine Tool-settings for Spiral Bevel Gears by Controlling Contact Path and Transmission Errors

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.

A novel method to predict static transmission error for spur gear pair based on accuracy grade

This paper proposes a novel method to predict the spur gear pair’s static transmission error based on the accuracy grade,in which manufacturing errors(MEs),assembly errors(AEs),tooth deflections(TDs)and profile modifications(PMs)are considered.For the prediction,a discrete gear model for generating the error tooth profile based on the ISO accuracy grade is presented.Then,the gear model and a tooth deflection model for calculating the tooth compliance on gear meshing are coupled with the transmission error model to make the prediction by checking the interference status between gear and pinion.The prediction method is validated by comparison with the experimental results from the literature,and a set of cases are simulated to study the effects of MEs,AEs,TDs and PMs on the static transmission error.In addition,the time-varying backlash caused by both MEs and AEs,and the contact ratio under load conditions are also investigated.The results show that the novel method can effectively predict the range of the static transmission error under different accuracy grades.The prediction results can provide references for the selection of gear design parameters and the optimization of transmission performance in the design stage of gear systems.

Effect of static transmission error on dynamic responses of spiral bevel gears

The effect of static transmission error on nonlinear dynamic response of the spiral bevel gear system combining with time-varying stiffness and backlash was investigated.Firstly,two different control equations of the spiral bevel gear model were adopted,where the static transmission error was expressed in two patterns as predesigned parabolic function and sine function of transmission errors.The dynamic response,bifurcation map,time domain response,phase curve and Poincare map were obtained by applying the explicit Runge-Kutta integration routine with variable-step.A comparative study was carried out and some profound phenomena were detected.The results show that there are many different kinds of tooth rattling phenomena at low speed.With the increase of speed,the system enters into stable motion without any rattling in the region(0.72,1.64),which indicates that the system with predesigned parabolic function of transmission error has preferable capability at high speed.

Excitation Prediction by Dynamic Transmission Error under Sliding Friction in Helical Gear System

Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-axis dynamic model coupled was established under the tooth friction force and solved by the perturbation method to compute real dynamic tooth load. The change laws of the friction force and friction torque were obtained in a meshing period. The transmission error formulation was analyzed to introduce meshing excitations. The maximum dynamic transmission error, the maximum meshing force and the maximum dynamic factor were calculated under different speeds, external loads and damping factors. The conclusions can provide theoretical basis for the gear design especially in tooth profile correction.

Quasi-Static and Dynamic Behaviors of Helical Gear System with Manufacturing Errors

Time?varying mesh stiffness(TVMS) and gear errors include short?term and long?term components are the two main internal dynamic excitations for gear transmission. The coupling relationship between the two factors is usually neglected in the traditional quasi-static and dynamic behaviors analysis of gear system. This paper investigates the influence of short?term and long?term components of manufacturing errors on quasi?static and dynamic behaviors of helical gear system considering the coupling relationship between TVMS and gear errors. The TVMS, loaded static transmission error(LSTE) and loaded composite mesh error(LCMS) are determined using an improved loaded tooth contact analysis(LTCA) model. Considering the structure of shaft, as well as the direction of power flow and bearing location, a precise generalized finite element dynamic model of helical gear system is developed, and the dynamic responses of the system are obtained by numerical integration method. The results suggest that lighter loading conditions result in smaller mesh stiffness and stronger vibration, and the corresponding resonance speeds of the system become lower. Long?term components of manufacturing errors lead to the appearance of sideband frequency components in frequency spectrum of dynamic responses. The sideband frequency components are predominant under light loading conditions. With the increase of output torque, the mesh frequency and its harmonics components tend to be enhanced relative to sideband frequency components. This study can provide effective reference for low noise design of gear transmission.

Design and Analysis of the Gemini Chain System in Dual Clutch Transmission of Automobile

Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.

Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

The aim of this study is to define optimal tooth modifications, introduced by appropriately chosen head-cutter geometry and machine tool setting, to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear （transmission error） of face-hobbed spiral bevel gears. As a result of these modifications, the gear pair becomes mismatched, and a point contact replaces the theoretical line contact. In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the ‘‘potential’’ contact line. A computer program was developed to implement the formulation provided above. By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions, transmission errors, and fillet stresses is investigated and discussed. The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.

Effect analysis of friction and damping on anti-backlash gear based on dynamics model with time-varying mesh stiffness

A nonlinear model of anti-backlash gear with time-varying friction and mesh stiffness was proposed for the further study on dynamic characteristics of anti-backlash gear. In order to improve the model precision, applied force analysis was completed in detail, and single or double tooth meshing states of two gear pairs at any timing were determined according to the meshing characteristic of anti-backlash gear. The influences of friction and variations of damping ratio on dynamic transmission error were analyzed finally by numerical calculation and the results show that anti-backlash gear can increase the composite mesh stiffness comparing with the mesh stiffness of the normal gear pair. At the pitch points where the frictions change their signs, additional impulsive effects are observed. The width of impulsive in the same value of center frequency is wider than that without friction, and the amplitude is lower. When gear pairs mesh in and out, damping can reduce the vibration and impact.

Pinion Tooth Surface Generation Strategy of Spiral Bevel Gears

Aviation spiral bevel gears are often generated by spiral generated modified（SGM） roll method.In this style,pinion tooth surface modified generation strategy has an important influence on the meshing and contact performances.For the optimal contact pattern and transmission error function,local synthesis is applied to obtain the machine-tool settings of pinion.For digitized machine,four tooth surface generation styles of pinion are proposed.For every style,tooth contact analysis（TCA） is applied to obtain contact pattern and transmission error function.For the difference between TCA transmission error function and design objective curve,the degree of symmetry and agreement are defined and the corresponding sub-objective functions are established.Linear weighted combination method is applied to get an equivalent objective function to evaluate the shape of transmission error function.The computer programs for the process above are developed to analyze the meshing performances of the four pinion tooth surface generation styles for a pair of aviation spiral bevel gears with 38/43 teeth numbers.The four analytical results are compared with each other and show that the incomplete modified roll is optimal for this gear pair.This study is an expansion to generation strategy of spiral bevel gears,and offers new alternatives to computer numerical control（CNC） manufacture of spiral bevel gears.

Investigation of a Design Modification for Double Helical Gears Reducing Vibration and Noise

To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge, substituting three segment parabolas for the line. The influence of longitudinal tooth modifications on tooth surface load distributions was discussed. Transmission error minimization and uniformity of tooth surface load distribution were chosen as optimization goals and the modified parameters were obtained by applying the complex method. Finally, an experiment comparing the loaded transmission error, vibration, and noise both before and after modifications was carried out. The results indicate that the modified design is reliable.

Detection of asymmetric transmission error in geared rotor system through transverse vibration analysis using full spectrum

Transmission error(TE)in geared rotors is a predominant source of inherent excitation at the pitch point of the gear meshing.In this paper,a transverse vibration analysis is presented to study the effect of TE on geared rotors.Due to asymmetry in the TE,it is expected to have both forward and backward whirls excited during rotor whirling,which could be used for its detection.This aspect has been envisioned first time in the present work.To capture this,an approach of orienting the line of action of a gear-pair along oblique plane is considered and the mathematical modeling has been performed of a simple spur gear-pair connecting two parallel shafts at its mid-span with an asymmetric TE.To capture the forward and backward whirls,equations of motion are converted into a complex form that facilitates obtaining response in full spectrum.The response of system model with assumed transmission error and gear-pair parameters has been obtained through a numerical simulation,which shows distinctly the forward and backward whirls due to the TE.Through a simple test rig experimentation,a similar behaviour was observed in transverse vibrations of geared rotors in the full spectrum,which validate the proposed model.

An Integrated Control and Scheduling Optimization Method of Networked Control Systems

Feedback control systems wherein the control loops are closed through a real-time network are called networked control systems (NCSs). The limitation of communication bandwidth results in transport delay, affects the property of real-time system, and degrades the performance of NCSs. An integrated control and scheduling optimization method using genetic algorithm is proposed in this paper. This method can synchronously optimize network scheduling and improve the performance of NCSs. To illustrate its effectiveness, an example is provided.

Self-error-rejecting photonic qubit transmission in polarization-spatial modes with linear optical elements

We present an original self-error-rejecting photonic qubit transmission scheme for both the polarization and spatial states of photon systems transmitted over collective noise channels. In our scheme, we use simple linear-optical elements, including half-wave plates, 50:50 beam splitters, and polarization beam splitters, to convert spatial-polarization modes into different time bins. By using postselection in different time bins, the success probability of obtaining the uncorrupted states approaches 1/4 for singlephoton transmission, which is not influenced by the coefficients of noisy channels. Our self-error-rejecting transmission scheme can be generalized to hyperentangled n-photon systems and is useful in practical high-capacity quantum communications with photon systems in two degrees of freedom.

Mesh relationship modeling and dynamic characteristic analysis of external spur gears with gear wear

Gear wear is one of the most common gear failures,which changes the mesh relationship of normal gear.A new mesh relationship caused by gear wear affects meshing excitations,such as mesh stiffness and transmission error,and further increases vibration and noise level.This paper aims to establish the model of mesh relationship and reveal the vibration characteristics of external spur gears with gear wear.A geometric model for a new mesh relationship with gear wear is proposed,which is utilized to evaluate the influence of gear wear on mesh stiffness and unloaded static transmission error(USTE).Based on the mesh stiffness and USTE considering gear wear,a gear dynamic model is established,and the vibration characteristics of gear wear are numerically studied.Comparison with the experimental results verifies the proposed dynamic model based on the new mesh relationship.The numerical and experimental results indicate that gear wear does not change the structure of the spectrum,but it alters the amplitude of the meshing frequencies and their sidebands.Several condition indicators,such as root-mean-square,kurtosis,and first-order meshing frequency amplitude,can be regarded as important bases for judging gear wear state.