A homologous series of Schiff base esters,4-chlorobenzylidene-4'-n-alkanoyloxyanilines,containing even number of carbons at the end groups of the molecules(C_(n-1)H_(2n-1)COO-,n=4,6,8,10,12,14,16) were synthesized...A homologous series of Schiff base esters,4-chlorobenzylidene-4'-n-alkanoyloxyanilines,containing even number of carbons at the end groups of the molecules(C_(n-1)H_(2n-1)COO-,n=4,6,8,10,12,14,16) were synthesized.The mesomorphic properties were investigated by differential scanning calorimetry(DSC) and polarizing optical microscopy(POM).It was found that the end groups of the molecules had an effect on the mesomorphic properties.n-Butanoyloxy was found non-mesogenic,whilst n-hexanoyloxy exhibited monotropic smectic phase.The higher members in this homologous series were enantiotropic smectogens.展开更多
The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was cha...The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.展开更多
Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO ...Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO biolubricant in the presence of a base catalyst obtained from plantain peelings (municipal waste). The yields from both catalysts were significantly similar (48% for the locally produced and 51% for the conventional) showing that the locally produced catalyst could be valorized. The synthesized biolubricant was characterized by measuring its physical and chemical properties. The specific gravity of 1.2, ASTM color of 1.5, cloud point of 0°C, pour point of -9°C, viscosities at 40°C of 509.80 cSt and at 100°C of 30.80 cSt, viscosity index of 120, flash point greater than 210°C and a fire point greater than 220°C were obtained. This synthesized biolubricant was found to be comparable to commercial T-46 petroleum lubricant sample produced industrially from mineral sources. We have therefore used local materials to produce a biolubricant using a cheap base catalyst produced from municipal waste.展开更多
基金Universiti Tunku Abdul Rahman(UTAR) for the financial support through UTAR Vote No.6202/O05the Malaysia Toray Science Foundation(UTAR Vote No.4359/000) for funding this project
文摘A homologous series of Schiff base esters,4-chlorobenzylidene-4'-n-alkanoyloxyanilines,containing even number of carbons at the end groups of the molecules(C_(n-1)H_(2n-1)COO-,n=4,6,8,10,12,14,16) were synthesized.The mesomorphic properties were investigated by differential scanning calorimetry(DSC) and polarizing optical microscopy(POM).It was found that the end groups of the molecules had an effect on the mesomorphic properties.n-Butanoyloxy was found non-mesogenic,whilst n-hexanoyloxy exhibited monotropic smectic phase.The higher members in this homologous series were enantiotropic smectogens.
基金Universiti Tunku Abdul Rahman(UTAR) for the research facilities andfinancial support through UTAR Vote No.6202/O05Universiti Sains Malaysia for the use of its research facilities.
文摘The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.
文摘Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO biolubricant in the presence of a base catalyst obtained from plantain peelings (municipal waste). The yields from both catalysts were significantly similar (48% for the locally produced and 51% for the conventional) showing that the locally produced catalyst could be valorized. The synthesized biolubricant was characterized by measuring its physical and chemical properties. The specific gravity of 1.2, ASTM color of 1.5, cloud point of 0°C, pour point of -9°C, viscosities at 40°C of 509.80 cSt and at 100°C of 30.80 cSt, viscosity index of 120, flash point greater than 210°C and a fire point greater than 220°C were obtained. This synthesized biolubricant was found to be comparable to commercial T-46 petroleum lubricant sample produced industrially from mineral sources. We have therefore used local materials to produce a biolubricant using a cheap base catalyst produced from municipal waste.