Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present...Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃ and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.展开更多
Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the ...Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the resin casting at different strain rates were investigated.The results indicate that the response behavior of the resin casting is controlled by different mechanisms at different strain rate, and some mechanical properties of vinyl ester casting are rate-dependent: the casting are destroyed in toughness model under strain rate 3.3×10 -4～6.6×10 -3/s, while the casting are destroyed in brittleness model under strain rate 950～5800/s. The yield stress, yield strain energy density are all increased with the increasing strain rates at quasi-static as well as at high strain rates. What is interesting is that the yield strain decreased with the strain rates increasing at quasi-static while increased at high strain rates. It is considered that the casting occurred forcing high elastic deformation at high strain rates. The damage of the specimens is mainly controlled by axial stress before unstable deformation, while mainly controlled by shear stress after unstable deformation, and then developed to fracture finally. This progress is rate-dependent: the development of the cracks inside the castings increased with the strain rate increasing.展开更多
文摘Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃ and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.
文摘Quasi-static and high strain rate compressive experiments on vinyl ester casting were carried out by means of MTS (Material Test System) and Hopkinson bar. The behaviors of the compressed unstable and fracture of the resin casting at different strain rates were investigated.The results indicate that the response behavior of the resin casting is controlled by different mechanisms at different strain rate, and some mechanical properties of vinyl ester casting are rate-dependent: the casting are destroyed in toughness model under strain rate 3.3×10 -4～6.6×10 -3/s, while the casting are destroyed in brittleness model under strain rate 950～5800/s. The yield stress, yield strain energy density are all increased with the increasing strain rates at quasi-static as well as at high strain rates. What is interesting is that the yield strain decreased with the strain rates increasing at quasi-static while increased at high strain rates. It is considered that the casting occurred forcing high elastic deformation at high strain rates. The damage of the specimens is mainly controlled by axial stress before unstable deformation, while mainly controlled by shear stress after unstable deformation, and then developed to fracture finally. This progress is rate-dependent: the development of the cracks inside the castings increased with the strain rate increasing.
