Design of a Multifrequency Signal Parameter Estimation Method for the Distribution Network Based on HIpST

The application of traditional synchronous measurement methods is limited by frequent fluctuations of electrical signals and complex frequency components in distribution networks.Therefore,it is critical to find solutions to the issues of multifrequency parameter estimation and synchronous measurement estimation accuracy in the complex environment of distribution networks.By utilizing the multifrequency sensing capabilities of discrete Fourier transform signals and Taylor series for dynamic signal processing,a multifrequency signal estimation approach based on HT-IpDFT-STWLS(HIpST)for distribution networks is provided.First,by introducing the Hilbert transform(HT),the influence of noise on the estimation algorithm is reduced.Second,signal frequency components are obtained on the basis of the calculated signal envelope spectrum,and the interpolated discrete Fourier transform(IpDFT)frequency coarse estimation results are used as the initial values of symmetric Taylor weighted least squares(STWLS)to achieve high-precision parameter estimation under the dynamic changes of the signal,and the method increases the number of discrete Fourier.Third,the accuracy of this proposed method is verified by simulation analysis.Data show that this proposed method can accurately achieve the parameter estimation of multifrequency signals in distribution networks.This approach provides a solution for the application of phasor measurement units in distribution networks.

Coarse-fine joint target parameter estimation method based on AN-RSC in OFDM passive radar

In this paper,we study the accuracy of delay-Doppler parameter estimation of targets in a passive radar using orthogonal frequency division multiplexing(OFDM)signal.A coarse-fine joint estimation method is proposed to achieve better estimation accuracy of target parameters without excessive computational burden.Firstly,the modulation symbol domain(MSD)method is used to roughly estimate the delay and Doppler of targets.Then,to obtain high-precision Doppler estimation,the atomic norm(AN)based on the multiple measurement vectors(MMV)model(MMV-AN)is used to manifest the signal sparsity in the continuous Doppler domain.At the same time,a reference signal compensation(RSC)method is presented to obtain highprecision delay estimation.Simulation results based on the OFDM signal show that the coarse-fine joint estimation method based on AN-RSC can obtain a more accurate estimation of target parameters compared with other algorithms.In addition,the proposed method also possesses computational advantages compared with the joint parameter estimation.

Parameter estimation of LFM signals based on time reversal

In this paper,parameter estimation of linear frequency modulation(LFM)signals containing additive white Gaussian noise is studied.Because the center frequency estimation of an LFM signal is affected by the error propagation effect,resulting in a higher signal to noise ratio(SNR)threshold,a parameter estimation method for LFM signals based on time reversal is proposed.The proposed method avoids SNR loss in the process of estimating the frequency,thus reducing the SNR threshold.The simulation results show that the threshold is reduced by 5 dB compared with the discrete polynomial transform(DPT)method,and the root-mean-square error(RMSE)of the proposed estimator is close to the Cramer-Rao lower bound(CRLB).

ESTIMATION OF THE NUMBER OF CORRELATED SOURCES WITH COMMON FREQUENCIES BASED ON POWER SPECTRAL DENSITY

Blind source separation and estimation of the number of sources usually demand that the number of sensors should be greater than or equal to that of the sources, which, however, is very difficult to satisfy for the complex systems. A new estimating method based on power spectral density （PSD） is presented. When the relation between the number of sensors and that of sources is unknown, the PSD matrix is first obtained by the ratio of PSD of the observation signals, and then the bound of the number of correlated sources with common frequencies can be estimated by comparing every column vector of PSD matrix. The effectiveness of the proposed method is verified by theoretical analysis and experiments, and the influence of noise on the estimation of number of source is simulated.

Approach to blind estimation of the PN sequence in DS-SS signals with residual carrier

This paper presents an approach of singular value de- composition plus digital phase lock loop to solve the difficult problem of blind pseudo-noise （PN） sequence estimation in low signal to noise ratios （SNR） direct sequence spread spectrum （DS-SS） signals with residual carrier. This approach needs some given parameters, such as the period and code rate of PN sequence. The received signal is firstly sampled and divided into non-overlapping signal vectors according to a temporal window, whose duration is two periods of PN sequence. An autocorrelation matrix is then computed and accumulated by those signal vectors one by one. The PN sequence with residual carrier can be estimated by the principal eigenvector of the autocorrelation matrix. Further more, a digital phase lock loop is used to process the estimated PN sequence, it estimates and tracks the residual carrier and removes the residual carrier in the end. Theory analysis and computer simulation results show that this approach can effectively realize the PN sequence blind estimation from the input DS-SS signals with residual carrier in lower SNR.

ALGORITHM FOR THE DETECTION AND PARAMETER ESTIMATION OF MULTICOMPONENT LFM SIGNALS

A novel algorithm based on Radon-Ambiguity Transform (RAT) and Adaptive Signal Decomposition (ASD) is presented for the detection and parameter estimation of multicomponent Linear Frequency Modulated (LFM) signals. The key problem lies in the chirplet estimation.Genetic algorithm is employed to search for the optimization parameter of chirplet. High estimation accuracy can be obtained even at low Signal-to-Noise Ratio(SNR). Finally simulation results are provided to demonstrate the performance of the proposed algorithm.

Method for determining number of coherent signals in the presence of colored noise

The approach of estimating the number of signals based on information theoretic criteria has good performance in the assumption of white noise, but it always leads to false estimation of the coherent sources in colored noise. An approach combining the combined information theoretic criteria and eigen- value correction, is presented to determine number of signals. The method uses maximum likelihood （ML） and information theoretic criteria to estimate coherent signals alternately, then eliminate the inequality of the eigenvalues caused by colored noise by correcting the noise eigenvalues. The computer simulation results prove the effective performance of the method.

Distributed Secure State Estimation of Multi-Agent Systems Under Homologous Sensor Attacks

This paper addresses the problem of distributed secure state estimation for multi-agent systems under homologous sensor attacks.Two types of secure Luenberger-like distributed observers are proposed to estimate the system state and attack signal simultaneously.Specifically,the proposed two observers are applicable to deal with the cases in the presence and absence of time delays during network communication.It is also shown that the proposed observers can ensure the attack estimations from different agents asymptotically converge to the same value.Sufficient conditions for guaranteeing the asymptotic convergence of the estimation errors are derived.Simulation examples are finally provided to demonstrate the effectiveness of the proposed results.

New direction of arrival estimation method for wideband coherent signals

To estimate the direction-of-arrival （DOA） of wideband coherent signals, a new method by modifying the orthogonality of the projected suhspaces method is proposed. And it can deal with randomly position perturbed arrays by using the Toeplitz method. This method needn＇t the primary information of DOA for focusing matrix and the sector dividing of interpolated method, which improving the precision of estimation and reducing the computational complexity. Simulations illustrate the effectiveness of this method.

Parameter estimation of DSSS signals in non-cooperative communication system

A new adaptive estimator for direct sequence spread spectrum （DSSS） signals using fourth-order cumulant based adaptive method is considered. The general higher-order statistics may not be easily applied in signal processing with too complex computation. Based on the fourth-order cumulant with 1-D slices and adaptive filters, an efficient algorithm is proposed to solve the problem and is extended for nonstationary stochastic processes. In order to achieve the accurate parameter estimation of direct sequence spread spectrum （DSSS） signals, the fast step uses the modified fourth-order cumulant to reduce the computing complexity. While the second step employs an adaptive recursive system to estimate the power spectrum in the frequency domain. In the case of intercepted signals without large enough data samples, the estimator provides good performance in parameter estimation and white Gaussian noise suppression. Computer simulations are included to corroborate the theoretical development with different signal-to-noise ratio conditions and recursive coefficients.

Universal FRFT-based algorithm for parameter estimation of chirp signals

The realization of the parameter estimation of chirp signals using the fractional Fourier transform （FRFT） is based on the assumption that the sampling duration of practical observed signals would be equal to the time duration of chirp signals contained in the former. However, in many actual circumstances, this assumption seems unreasonable. On the basis of analyzing the practical signal form, this paper derives the estimation error of the existing parameter estimation method and then proposes a novel and universal parameter estimation algorithm. Furthermore, the proposed algorithm is developed which allows the estimation of the practical observed Gaussian windowed chirp signal. Simulation results show that the new algorithm works well.

DOA estimation of coexisted noncoherent and coherent signals via sparse representation of cleaned array covariance matrix

A new direction finding method is presented to deal with coexisted noncoherent and co- herent signals without smoothing operation. First the direction-of-arrival （DOA） estimation task is herein reformulated as a sparse reconstruction problem of the cleaned array covariance matrix, which is processed to eliminate the affection of the noise. Then by using the block of matrices, the information of DOAs which we pursuit are implied in the sparse coefficient matrix. Finally, the sparse reconstruction problem is solved by the improved M-FOCUSS method, which is applied to the situation of block of matrices. This method outperforms its data domain counterpart in terms of noise suppression, and has a better performance in DOA estimation than the customary spatial smoothing technique. Simulation results verify the efficacy of the proposed method.

Impacts of the sampling design on the abundance index estimation of Portunus trituberculatus using bottom trawl

In the survey of fishery resources,the sampling design will directly impact the accuracy of the estimation of the abundance.Therefore,it is necessary to optimize the sampling design to increase the quality of fishery surveys.The distribution and abundance of fisheries resource estimated based on the bottom trawl survey data in the Changjiang River(Yangtze River)Estuary-Hangzhou Bay and its adjacent waters in 2007 were used to simulate the"true"situation.Then the abundance index of Portunus trituberculatus were calculated and compared with its true index to evaluate the impacts of different sampling designs on the abundance estimation.Four sampling methods(including fixed-station sampling,simple random sampling,stratified fixed-station sampling,and stratified random sampling)were simulated.Three numbers of stations(9,16 and 24)were assumed for the scenarios of fixed-station sampling and simple random sampling without stratification.While 16 stations were assumed for the scenarios with stratification.Three reaction distances(1.5 m,3 m and 5 m)of P.trituberculatus to the bottom line of trawl were also assumed to adapt to the movement ability of the P.trituberculatus for different ages,seasons and substrate conditions.Generally speaking,compared with unstratified sampling design,the stratified sampling design resulted in more accurate abundance estimation of P.trituberculatus,and simple random sampling design is better than fixed-station sampling design.The accuracy of the simulated results was improved with the increase of the station number.The maximum relative estimation error(REE)was 163.43%and the minimum was 49.40%for the fixed-station sampling scenario with 9 stations,while 38.62%and 4.15%for 24 stations.With the increase of reaction distance,the relative absolute bias(RAB)and REE gradually decreased.Resource-intensive area and the seasons with high density variances have significant impacts on simulation results.Thus,it will be helpful if there are prior information or pre-survey results about density distribution.The current study can provide reference for the future sampling design of bottom trawl of P.trituberculatus and other species.

Vibration Source Number Estimation of A Shell Structure

It has been challenging to correctly separate the mixed signals into source components when the source number is not known a priori.To reveal the complexity of the measured vibration signals,and provide the priori information for the blind source separation,in this paper,we propose a novel source number estimation based on independent component analysis(ICA)and clustering evaluation analysis,and then carry out experiment studies with typical mechanical vibration signals from a shell structure.The results demonstrate that the proposed ICA based source number estimation performs stably and robustly for the shell structure.

The effect of different number of diffusion gradients on SNR of diffusion tensor-derived measurement maps

Diffusion tensor imaging (DTI) is mainly applied to white matter fiber tracking in human brain, but there is still a debate on how many diffusion gradient directions should be used to get the best results. In this paper, the performance of 7 protocols corresponding to 6, 9, 12, 15, 20, 25, and 30 noncollinear number of diffusion gradi-ent directions (NDGD) were discussed by com-paring signal-noise ratio (SNR) of tensor- de-rived measurement maps and fractional ani-sotropy (FA) values. All DTI data (eight healthy volunteers) were downloaded from the website of Johns Hopkins Medical Institute Laboratory of Brain Anatomi-cal MRI with permission. FA, apparent diffusion constant mean (ADC-mean), the largest eigen-value (LEV), and eigenvector orientation (EVO) maps associated with LEV of all subjects were calculated derived from tensor in the 7 proto-cols via DTI Studio. A method to estimate the variance was presented to calculate SNR of these tensor-derived maps. Mean ±standard deviation of the SNR and FA values within re-gion of interest (ROI) selected in the white mat-ter were compared among the 7 protocols. The SNR were improved significantly with NDGD increasing from 6 to 20 (P<0.05). From 20 to 30, SNR were improved significantly for LEV and EVO maps (P<0.05), but no significant dif-ferences for FA and ADC-mean maps (P>0.05). There were no significant variances in FA val-ues within ROI between any two protocols (P>0.05). The SNR could be improved with NDGD in-creasing, but an optimum protocol is needed because of clinical limitations.

ASYMPTOTIC PROPERTY STUDY OF THE LEAST SQUARE ESTIMATES OF 2-D EXPONENTIAL SIGNALS VIA COMPLEX SIGNAL PROCESSING APPROACH

By use of the approach of complex random signal processing, the asymptotic statistical properties of the least square estimates of 2-D exponential signals are studied. In doing so it is found that the representation is considerably more intuitive, and is analytically more tractable.

Impacts of sampling design on the abundance estimation of Portunus trituberculatus using crab pots

Fishery-independent surveys can provide high-quality data and support fishery assessment and management.Optimization of sampling design is crucial to increase the quality of fishery surveys.Crab pots are important fishing gears used to catch crabs.We analyzed the impacts of sampling design of crab pots on the abundance of Portunus trituberculatus in the Changjiang(Yangtze)River estuary to the Hangzhou Bay and its adjacent waters in East China Sea.The crab pots were cylindrical,240 mm in height and 600 mm in diameter of the iron ring.Our sampling designs(including fixed-station sampling,simple random sampling,stratified fixed-station sampling,and stratified random sampling),three number of stations(9,16,and 24),and three numbers of crab pots(500,1000,and 3000)were simulated and compared with the“true”abundance that obtained from bottom trawl surveys in the study area in 2007.The scenarios with 16 stations were set in stratification as a control group for comparison with unstratified designs.Results show that simple random sampling can obtain more stable results than fixed-station sampling in the abundance estimation of P.trituberculatus.In addition,stratified sampling resulted in more accurate abundance than unstratified sampling.The accuracy of the simulated results improved with the increase of the number of stations.No remarkable differences in the results were found among the scenarios of different number of crab pots at each station.However,resource-intensive areas exerted great impacts on simulation results.Thus,prior information or pre-survey results about resource abundance and density distribution are necessary.This study may serve as a reference for future sampling designs of crab pots of P.trituberculatus and other species.

Probability distribution of wind power volatility based on the moving average method and improved nonparametric kernel density estimation

In the process of large-scale,grid-connected wind power operations,it is important to establish an accurate probability distribution model for wind farm fluctuations.In this study,a wind power fluctuation modeling method is proposed based on the method of moving average and adaptive nonparametric kernel density estimation(NPKDE)method.Firstly,the method of moving average is used to reduce the fluctuation of the sampling wind power component,and the probability characteristics of the modeling are then determined based on the NPKDE.Secondly,the model is improved adaptively,and is then solved by using constraint-order optimization.The simulation results show that this method has a better accuracy and applicability compared with the modeling method based on traditional parameter estimation,and solves the local adaptation problem of traditional NPKDE.

Low-Complexity DOA Estimation of Noncircular Signals for Coprime Sensor Arrays

This paper presents a low?complexity method for the direction?of?arrival(DOA)estimation of noncircular signals for coprime sensor arrays.The noncircular property is exploited to improve the performance of DOA estimation.To reduce the computational complexity,the rotational invariance propagator method(RIPM)is included in the algorithm.First,the extended array output is reconstructed by combining the array output and its conjugated counterpart.Then,the RIPM is utilized to obtain two sets of DOA estimates for two subarrays.Finally,the true DOAs are estimated by combining the consistent results of the two subarrays.This illustrates the potential gain that both noncircularity and coprime arrays provide when considered together.The proposed algorithm has a lower computational complexity and a better DOA estimation performance than the standard estimation of signal parameters by the rotational invariance technique and Capon algorithm.Numerical simulation results illustrate the effectiveness and superiority of the proposed algorithm.

Super-resolution DOA estimation for correlated off-grid signals via deep estimator

This paper develops a deep estimator framework of deep convolution networks(DCNs)for super-resolution direction of arrival(DOA)estimation.In addition to the scenario of correlated signals,the quantization errors of the DCN are the major challenge.In our deep estimator framework,one DCN is used for spectrum estimation with quantization errors,and the remaining two DCNs are used to estimate quantization errors.We propose training our estimator using the spatial sampled covariance matrix directly as our deep estimator’s input without any feature extraction operation.Then,we reconstruct the original spatial spectrum from the spectrum estimate and quantization errors estimate.Also,the feasibility of the proposed deep estimator is analyzed in detail in this paper.Once the deep estimator is appropriately trained,it can recover the correlated signals’spatial spectrum fast and accurately.Simulation results show that our estimator performs well in both resolution and estimation error compared with the state-of-the-art algorithms.