Estimating liver weight of adults by body weight and gender

AIM： To estimate the standard liver weight for assessing adequacies of graft size in live donor liver transplantation and remnant liver in major hepatectomy for cancer. METHODS： In this study, anthropometric data of body weight and body height were tested for a correlation with liver weight in 159 live liver donors who underwent donor right hepatectomy including the middle hepatic vein. Liver weights were calculated from the right lobe graft weight obtained at the back table, divided by the proportion of the right lobe on the computed tomography. RESULTS： The subjects, all Chinese, had a mean age of 35.8 ± 10.5 years, and a female to male ratio of 118：41. The mean volume of the right lobe was 710.14 ±131.46 mL and occupied 64.55%±4.47% of the whole liver on computed tomography. Right lobe weighed 598.90±117.39 g and the estimated liver weight was 927.54 ± 168.78 g. When body weight and body height were subjected to multiple stepwise linear regression analysis, body height was found to be insignificant. Females of the same body weight had a slightly lower liver weight. A formula based on body weight and gender was derived： Estimated standard liver weight （g）=218＋BW （kg）× 12.3＋gender×51 （R^2 = 0.48） （female=0, male= 1）. Based on the anthropometric data of these 159 subjects, liver weights were calculated using previously published formulae derived from studies on Caucasian, .lapanese, Korean, and Chinese. All formulae overestimated liver weights compared to this formula. The Japanese formula overestimated the estimated standard liver weight （ESLW） for adults less than 60 kg.CONCLUSION： A formula applicable to Chinese males and females is available. A formula for individual races appears necessary.

Improving precision of field inventory estimation of aboveground biomass through an alternative view on plot biomass

We contrast a new continuous approach(CA)for estimating plot-level above-ground biomass(AGB)in forest inventories with the current approach of estimating AGB exclusively from the tree-level AGB predicted for each tree in a plot,henceforth called DA(discrete approach).With the CA,the AGB in a forest is modelled as a continuous surface and the AGB estimate for a fixed-area plot is computed as the integral of the AGB surface taken over the plot area.Hence with the CA,the portion of the biomass of in-plot trees that extends across the plot perimeter is ignored while the biomass from trees outside of the plot reaching inside the plot is added.We use a sampling simulation with data from a fully mapped two hectare area to illustrate that important differences in plot-level AGB estimates can emerge.Ideally CA-based estimates of mean AGB should be less variable than those derived from the DA.If realized,this difference translates to a higher precision from field sampling,or a lower required sample size.In our case study with a target precision of 5%(i.e.relative standard error of the estimated mean AGB),the CA required a 27.1%lower sample size for small plots of 100 m2 and a 10.4%lower sample size for larger plots of 1700 m2.We examined sampling induced errors only and did not yet consider model errors.We discuss practical issues in implementing the CA in field inventories and the potential in applications that model biomass with remote sensing data.The CA is a variation on a plot design for above-ground forest biomass;as such it can be applied in combination with any forest inventory sampling design.

Calibration of Four Nonlinear Failure Envelopes from Triaxial Test Data and Influence of Nonlinearity on Geotechnical Computations

It is now recognized that many geomaterials have nonlinear failure envelopes. This non-linearity is most marked at lower stress levels, the failure envelope being of quasi-parabolic shape. It is not easy to calibrate these nonlinear failure envelopes from triaxial test data. Currently only the power-type failure envelope has been studied with an established formal procedure for its determination from triaxial test data. In this paper, a simplified procedure is evolved for the development of four different types of nonlinear envelopes. These are of invaluable assistance in the evaluation of true factors of safety in problems of slope stability and correct computation of lateral earth pressure and bearing capacity. The use of the Mohr-Coulomb failure envelopes leads to an overestimation of the factors of safety and other geotechnical quantities.