A New Class of L-Moments Based Calibration Variance Estimators

Variance is one of themost important measures of descriptive statistics and commonly used for statistical analysis.The traditional second-order central moment based variance estimation is a widely utilized methodology.However,traditional variance estimator is highly affected in the presence of extreme values.So this paper initially,proposes two classes of calibration estimators based on an adaptation of the estimators recently proposed by Koyuncu and then presents a new class of L-Moments based calibration variance estimators utilizing L-Moments characteristics(L-location,Lscale,L-CV)and auxiliary information.It is demonstrated that the proposed L-Moments based calibration variance estimators are more efficient than adapted ones.Artificial data is considered for assessing the performance of the proposed estimators.We also demonstrated an application related to apple fruit for purposes of the article.Using artificial and real data sets,percentage relative efficiency(PRE)of the proposed class of estimators with respect to adapted ones are calculated.The PRE results indicate to the superiority of the proposed class over adapted ones in the presence of extreme values.In this manner,the proposed class of estimators could be applied over an expansive range of survey sampling whenever auxiliary information is available in the presence of extreme values.

Nonlinear total least-squares variance component estimation for GM(1,1)model

The solution of the grey model(GM(1,1)model)generally involves equal-precision observations,and the(co)variance matrix is established from the prior information.However,the data are generally available with unequal-precision measurements in reality.To deal with the errors of all observations for GM(1,1)model with errors-in-variables(EIV)structure,we exploit the total least-squares(TLS)algorithm to estimate the parameters of GM(1,1)model in this paper.Ignoring that the effect of the improper prior stochastic model and the homologous observations may degrade the accuracy of parameter estimation,we further present a nonlinear total least-squares variance component estimation approach for GM(1,1)model,which resorts to the minimum norm quadratic unbiased estimation(MINQUE).The practical and simulative experiments indicate that the presented approach has significant merits in improving the predictive accuracy in comparison with control methods.

L-Moments Based Calibrated Variance Estimators Using Double Stratified Sampling

Variance is one of the most vital measures of dispersion widely employed in practical aspects.A commonly used approach for variance estimation is the traditional method of moments that is strongly influenced by the presence of extreme values,and thus its results cannot be relied on.Finding momentum from Koyuncu’s recent work,the present paper focuses first on proposing two classes of variance estimators based on linear moments(L-moments),and then employing them with auxiliary data under double stratified sampling to introduce a new class of calibration variance estimators using important properties of L-moments(L-location,L-cv,L-variance).Three populations are taken into account to assess the efficiency of the new estimators.The first and second populations are concerned with artificial data,and the third populations is concerned with real data.The percentage relative efficiency of the proposed estimators over existing ones is evaluated.In the presence of extreme values,our findings depict the superiority and high efficiency of the proposed classes over traditional classes.Hence,when auxiliary data is available along with extreme values,the proposed classes of estimators may be implemented in an extensive variety of sampling surveys.

A Geometric Approach to Conditioning and the Search for Minimum Variance Unbiased Estimators

Our purpose is twofold: to present a prototypical example of the conditioning technique to obtain the best estimator of a parameter and to show that this technique resides in the structure of an inner product space. The technique uses conditioning of an unbiased estimator on a sufficient statistic. This procedure is founded upon the conditional variance formula, which leads to an inner product space and a geometric interpretation. The example clearly illustrates the dependence on the sampling methodology. These advantages show the power and centrality of this process.

General Classes of Variance Estimators in Simple Random Sampling Using Multi-auxiliary Variables

Srivastava and Jhajj [ 1 6] proposed a class of estimators for estimating population variance using multi auxiliary variables in simple random sampling and they utilized the means and variances of auxiliary variables. In this paper, we adapted this class and motivated by Searle [13], and we suggested more generalized class of estimators for estimating the population variance in simple random sampling. The expressions for the mean square error of proposed class have been derived in general form. Besides obtaining the minimized MSE of the proposed and adapted class, it is shown that the adapted classis the special case of the proposed class. Moreover, these theoretical findings are supported by an empirical study of original data.

Robust Variance Components Estimation in the PERG Mixed Distributions of Empirical Variances—PEROBVC Method

A mixed distribution of empirical variances, composed of two distributions the basic and contaminating ones, and referred to as PERG mixed distribution of empirical variances, is considered. In the paper a robust inverse problem solution is given, namely a (new) robust method for estimation of variances of both distributions—PEROBVC Method, as well as the estimates for the numbers of observations for both distributions and, in this way also the estimate of contamination degree.

Comparison of REML and MINQUE for Estimated Variance Components and Predicted Random Effects

Linear mixed model (LMM) approaches have been widely applied in many areas of research data analysis because they offer great flexibility for different data structures and linear model systems. In this study, emphasis is placed on comparing the properties of two LMM approaches: restricted maximum likelihood (REML) and minimum norm quadratic unbiased estimation (MINQUE) with and without resampling techniques being included. Bias, testing power, Type I error, and computing time were compared between REML and MINQUE approaches with and without Jackknife technique based on 500 simulated data sets. Results showed that MINQUE and REML methods performed equally regarding bias, Type I error, and power. Jackknife-based MINQUE and REML greatly improved power compared to non-Jackknife based linear mixed model approaches. Results also showed that MINQUE is more time-saving compared to REML, especially with the use of resampling techniques and large data set analysis. Results from the actual cotton data analysis were in agreement with our simulated results. Therefore, Jackknife-based MINQUE approaches could be recommended to achieve desirable power with reduced time for a large data analysis and model simulations.

The mathematical weighting of GNSS observations based on different types of receivers/antennas and environmental conditions

Stochastic models play an important role in achieving high accuracy in positioning,the ideal estimator in the least-squares(LS)can be obtained only by using the suitable stochastic model.This study investigates the role of variance component estimation(VCE)in the LS method for Precise Point Positioning(PPP).This estimation is performed by considering the ionospheric-free(IF)functional model for code and the phase observation of Global Positioning System(GPS).The strategy for estimating the accuracy of these observations was evaluated to check the effect of the stochastic model in four modes:a)antenna type,b)receiver type,c)the tropospheric effect,and d)the ionosphere effect.The results show that using empirical variance for code and phase observations in some cases caused erroneous estimation of unknown components in the PPP model.This is because a constant empirical variance may not be suitable for various receivers and antennas under different conditions.Coordinates were compared in two cases using the stochastic model of nominal weight and weight estimated by LS-VCE.The position error difference for the east-west,north-south,and height components was 1.5 cm,4 mm,and 1.8 cm,respectively.Therefore,weight estimation with LS-VCE can provide more appropriate results.Eventually,the convergence time based on four elevation-dependent models was evaluated using nominal weight and LS-VCE weight.According to the results,the LS-VCE has a higher convergence rate than the nominal weight.The weight estimation using LS-VCE improves the convergence time in four elevation-dependent models by 11,13,12,and 9 min,respectively.

Recent Advances in the Geodesy Data Processing

Geodetic functional models,stochastic models,and model parameter estimation theory are fundamental for geodetic data processing.In the past five years,through the unremitting efforts of Chinese scholars in the field of geodetic data processing,according to the application and practice of geodesy,they have made significant contributions in the fields of hypothesis testing theory,un-modeled error,outlier detection,and robust estimation,variance component estimation,complex least squares,and ill-posed problems treatment.Many functional models such as the nonlinear adjustment model,EIV model,and mixed additive and multiplicative random error model are also constructed and improved.Geodetic data inversion is an important part of geodetic data processing,and Chinese scholars have done a lot of work in geodetic data inversion in the past five years,such as seismic slide distribution inversion,intelligent inversion algorithm,multi-source data joint inversion,water reserve change and satellite gravity inversion.This paper introduces the achievements of Chinese scholars in the field of geodetic data processing in the past five years,analyzes the methods used by scholars and the problems solved,and looks forward to the unsolved problems in geodetic data processing and the direction that needs further research in the future.

Sliced Average Variance Estimation for Tensor Data

Tensor data have been widely used in many fields,e.g.,modern biomedical imaging,chemometrics,and economics,but often suffer from some common issues as in high dimensional statistics.How to find their low-dimensional latent structure has been of great interest for statisticians.To this end,we develop two efficient tensor sufficient dimension reduction methods based on the sliced average variance estimation(SAVE)to estimate the corresponding dimension reduction subspaces.The first one,entitled tensor sliced average variance estimation(TSAVE),works well when the response is discrete or takes finite values,but is not■consistent for continuous response;the second one,named bias-correction tensor sliced average variance estimation(CTSAVE),is a de-biased version of the TSAVE method.The asymptotic properties of both methods are derived under mild conditions.Simulations and real data examples are also provided to show the superiority of the efficiency of the developed methods.

Self-tuning weighted measurement fusion Kalman filter and its convergence

For multisensor systems,when the model parameters and the noise variances are unknown,the consistent fused estimators of the model parameters and noise variances are obtained,based on the system identification algorithm,correlation method and least squares fusion criterion.Substituting these consistent estimators into the optimal weighted measurement fusion Kalman filter,a self-tuning weighted measurement fusion Kalman filter is presented.Using the dynamic error system analysis （DESA） method,the convergence of the self-tuning weighted measurement fusion Kalman filter is proved,i.e.,the self-tuning Kalman filter converges to the corresponding optimal Kalman filter in a realization.Therefore,the self-tuning weighted measurement fusion Kalman filter has asymptotic global optimality.One simulation example for a 4-sensor target tracking system verifies its effectiveness.

Variable Selection of Partially Linear Single-index Models

In this article, we study the variable selection of partially linear single-index model(PLSIM). Based on the minimized average variance estimation, the variable selection of PLSIM is done by minimizing average variance with adaptive l1 penalty. Implementation algorithm is given. Under some regular conditions, we demonstrate the oracle properties of aLASSO procedure for PLSIM. Simulations are used to investigate the effectiveness of the proposed method for variable selection of PLSIM.

DISTRIBUTED MONITORING SYSTEM RELIABILITY ESTIMATION WITH CONSIDERATION OF STATISTICAL UNCERTAINTY

Taking into account the whole system structure and the component reliability estimation uncertainty, a system reliability estimation method based on probability and statistical theory for distributed monitoring systems is presented. The variance and confidence intervals of the system reliability estimation are obtained by expressing system reliability as a linear sum of products of higher order moments of component reliability estimates when the number of component or system survivals obeys binomial distribution. The eigenfunction of binomial distribution is used to determine the moments of component reliability estimates, and a symbolic matrix which can facilitate the search of explicit system reliability estimates is proposed. Furthermore, a case of application is used to illustrate the procedure, and with the help of this example, various issues such as the applicability of this estimation model, and measures to improve system reliability of monitoring systems are discussed.

Improving Energy and Power Efficiency Using NComputing and Approaches for Predicting Reliability of Complex Computing Systems

Opting to follow the computing-design philosophy that the best way to reduce power consumption and increase energy efficiency is to reduce waste, we propose an architecture with a very simple ready-implementation by using an NComputing device that can allow multi-users but only one computer is needed. This intuitively can save energy, space as well as cost. In this paper, we propose a simple and realistic NComputing architecture to study the energy and power-efficient consumption of desktop computer systems by using the NComputing device. We also propose new approaches to estimate the reliability of k-out-of-n systems based on the delta method. The k-out-of-n system consisting of n subsystems works if and only if at least k-of-the-n subsystems work. More specificly, we develop approaches to obtain the reliability estimation for the k-out-of-n systems which is composed of n independent and identically distributed subsystems where each subsystem （or energy-efficient usage application） can be assumed to follow a two-parameter exponential lifetime distribution function. The detailed derivations of reliability estimation of k-out-of-n systems based on the biased-corrected estimator, known as delta method, the uniformly minimum variance unbiased estimate （UMVUE） and maximum likelihood estimate （MLE） are discussed. An energy-management NComputing application is discussed to illustrate the reliability results in terms of the energy consumption usages of a computer system with qua（t-core, 8 GB of RAM, and a GeForce 9800GX-2 graphics card to perform various complex applications. The estimated reliability values of systems based on the UMVUE and the delta method differ only slightly. Often the UMVUE of reliability for a complex system is a lot more difficult to obtain, if not impossible. The delta method seems to be a simple and better approach to obtain the reliability estimation of complex systems. The results of this study also show that, in practice, the NComputing architecture improves both energy cost saving and energy efficient living spaces.

ML and MAP Channel Estimation for Distributed OneWay Relay Networks with Orthogonal Training

In this letter,we investigate the individual channel estimation for the classical distributed-space-time-coding(DSTC) based one-way relay network(OWRN) under the superimposed training framework.Without resorting to the composite channel estimation,as did in traditional work,we directly estimate the individual channels from the maximum likelihood(ML) and the maximum a posteriori(MAP) estimators.We derive the closed-form ML estimators with the orthogonal training designing.Due to the complicated structure of the MAP in-channel estimator,we design an iterative gradient descent estimation process to find the optimal solutions.Numerical results are provided to corroborate our studies.

Sampling Error Estimation in Stratified Surveys

Many operations carried out by official statistical institutes use large-scale surveys obtained by stratified random sampling without replacement. Variables commonly examined in this type of surveys are binary, categorical and continuous, and hence, the estimates of interest involve estimates of proportions, totals and means. The problem of approximating the sampling relative error of this kind of estimates is studied in this paper. Some new jackknife methods are proposed and compared with plug-in and bootstrap methods. An extensive simulation study is carried out to compare the behavior of all the methods considered in this paper.

Model-free adaptive robust control method for high-speed trains

Aiming at the robustness issue in high-speed trains(HSTs)operation control,this article proposes a model-free adaptive control(MFAC)scheme to suppress disturbance.Firstly,the dynamic linearization data model of train system under the action of measurement disturbance is given,and the Kalman filter(KF)based on this model is derived under the minimum variance estimation criterion.Then,according to the KF,an anti-interference MFAC scheme is designed.This scheme only needs the input and output data of the controlled system to realize the MFAC of the train under strong disturbance.Finally,the simulation experiment of CRH380A HSTs is carried out and compared with the traditional MFAC and the MFAC with attenuation factor.The proposed control algorithm can effectively suppress the measurement disturbance,and obtain smaller tracking error and larger signal to noise ratio with better applicability.

Linear minimum variance estimation fusion

This paper shows that a general multisensor unbiased linearly weighted estimation fusion essentially is the linear minimum variance (LMV) estimation with linear equality constraint, and the general estimation fusion formula is developed by extending the Gauss-Markov estimation to the random parameter under estimation. First, we formulate the problem of distributed estimation fusion in the LMV setting. In this setting, the fused estimator is a weighted sum of local estimates with a matrix weight. We show that the set of weights is optimal if and only if it is a solution of a matrix quadratic optimization problem subject to a convex linear equality constraint. Second, we present a unique solution to the above optimization problem, which depends only on the covariance matrix Ck.Third, if a priori information, the expectation and covariance, of the estimated quantity is unknown, a necessary and sufficient condition for the above LMV fusion becoming the best unbiased LMV estimation with known prior information as the above is presented. We also discuss the generality and usefulness of the LMV fusion formulas developed. Finally, we provide an off-line recursion of Ck for a class of multisensor linear systems with coupled measurement noises.

Robust U-type test for high dimensional regression coefficients using refitted cross-validation variance estimation

This paper aims to develop a new robust U-type test for high dimensional regression coefficients using the estimated U-statistic of order two and refitted cross-validation error variance estimation. It is proved that the limiting null distribution of the proposed new test is normal under two kinds of ordinary models.We further study the local power of the proposed test and compare with other competitive tests for high dimensional data. The idea of refitted cross-validation approach is utilized to reduce the bias of sample variance in the estimation of the test statistic. Our theoretical results indicate that the proposed test can have even more substantial power gain than the test by Zhong and Chen(2011) when testing a hypothesis with outlying observations and heavy tailed distributions. We assess the finite-sample performance of the proposed test by examining its size and power via Monte Carlo studies. We also illustrate the application of the proposed test by an empirical analysis of a real data example.

Comparative analysis of recent hydrological models and an attempt to generate new combined products for monitoring terrestrial water storage change

Hydrological models are crucial for characterizing large-scale water quantity variations and correcting GNSS reference station vertical displacements.We evaluated the robustness of multiple models,such as the Global Land Data Assimilation System (GLDAS),the Famine Early Warning System Network Land Data Assimilation System (FLDAS),the National Centers for Environmental Prediction (NCEP),and the WaterGAP Global Hydrology Model (WGHM).Inter-model and outer comparisons with Global Positioning System (GPS) coordinate time series,satellite gravity field Mascon solutions,and Global Precipitation Climatology Centre (GPCC) guide our assessment.Results confirm WGHM's 26% greater effectiveness in correcting nonlinear variations in GPS height time series compared to NCEP.In the Amazon River Basin,a 5-month lag between FLDAS,GLDAS,and satellite gravity results is observed.In eastern Asia and Australia,NCEP's Terrestrial Water Storage Changes (TWSC)-derived surface displacements correlate differently with precipitation compared to other models.Three combined hydrological models (H-VCE,H-EWM,and H-CVM) utilizing Variance Component Estimation (VCE),Entropy Weight Method (EWM),and Coefficient of Variation Method (CVM) are formulated.Correcting nonlinear variations with combined models enhances global GPS height scatter by 15%-17%.Correlation with precipitation increases by 25%-30%,and with satellite gravity,rises from 0.2 to 0.8 at maximum.The combined model eliminates time lag in the Amazon Basin TWSC analysis,exhibiting a four times higher signal-to-noise ratio than single models.H-VCE demonstrates the highest accuracy.In summary,the combined hydrological model minimizes discrepancies among individual models,significantly improving accuracy for monitoring large-scale TWSC.