Miscibility, Crystallization, and Rheological Behavior of Solution Casting Poly（3-hydroxybutyrate）/poly（ethylene succinate） Blends Probed by Differential Scanning Calorimetry, Rheology, and Optical Microscope Techniques

The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.

Biosynthesis of poly-3-hydroxybutyrate with a high molecular weight by methanotroph from methane and methanol

Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.

Production of Poly(3-Hydroxybutyrate)by Fed-Batch Culture of Alcaligenes Eutrophus at Phosphorus Limitation in 50 L fermenter

Poly(3-hydroxybutyrate) (PHB) is an intracellular carbon and energy storage material accumulated by many kinds of microorganism under unfavorable growth conditions. For the production of PHB, Alcaligenes eutrophus has been widely used because it is easy to grow, and its physiological and biochemical changes during the PHB synthesis is understood in details. A very high concentration and productivity of PHB could be obtained by fed-batch culture of Alcaligenes eutrophus with phosphate limitation in 50 L fermenter.

SYNTHESIS OF NOVEL BLOCK COPOLYMERS OF POLY(3-HYDROXYBUTYRIC ACID)WITH POLY(ETHYLENE GLYCOL)THROUGH ANIONIC POLYMERISATION

A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-opening polymerization of beta-butyrolactone (beta-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which were prepared by the esterification of aliphatic cyclic anhydride and poly(ethylene glycol) (PEG) oligomers (M-n = 2000, 4000 and 6000) and conversion of potassium dicarboxylates. The resultant copolymers as well as the intermediates were characterized by IR, H-1-NMR and GPC.

Complete Valorization of Olive Mill Wastewater through an Integrated Process for Poly-3-hydroxybutyrate Production

An economical and environmental sustainability of bioplastic production is dependent on the use of low cost and waste C-sources as raw materials. OMW （Olive Mill Wastewater） with its high organic load represents a dangerous polluting waste. Herein the authors present an integrated process for the simultaneous recovery of polyphenols, high value natural antioxidants, production of PHAs （polyhydroxyalkanotes）, thermoplastic bio-polymers, in particular of PHB （poly-3-hydroxybutyrate） starting from OMW. The combination of membrane filtration and bacterial digestion of OMW resulted in very high yields of polyphenols （3 2.5 g/L） and PHB （31.4 mg/L.h） if compared with the state of the art. These results make the technical approach described here effective for reducing the polluting effect of OMW and maximizing the valuable product yield. Moreover the process is readily suitable for an industrial scale PHB production from OMW.

Use of a Simple Fabrication Process to Produce a Biosensor： The 3-Hydroxybutyrate Dehydrogenase Case

This study was aimed to construct a biodegradable but reliable 3-β-hydroxybutymte biosensor. In this context a versatile paper based biosensor, quickly, easily and cheaply fabricated is reported. The procedure of fabrication is based on the assumption that the introduction of the enzyme in the carbon ink will allow enzyme stabilization and facilitate the study of the catalysis of enzymes and the detection of substrates. To prove this concept we use the enzyme 3-hydroxybutyrate dehydrogenase, in aqueous solution. This enzyme was chosen because it catalyzes the 3-β-hydroxybutyrate, which results from ketoacidosis. The quantification this substance in the diabetics＇ blood is very important as it can increase the reliability of the diagnosis of glycaemia. To prove the multi-use of this biosensor we not only study the redox process in steady state and during the catalytic process, but also detected and quantify the 3-β-hydroxybutyrate. Our results showed that it was possible to study the redox process that occurred during the catalysis and to confirm the amino acid residues that participate in it. It was also observed that glucose and ascorbic acid can interfere in the detection and quantification of the 3-β-hydroxybutyrate, what should be in mind when the quantification of the 3-β-hydroxybutyrate is made in blood samples.

Preparation of Ni(HCO_3)_2 and its catalytic performance in synthesis of benzoin ethyl ether

Ni（HCO3）2 with unique phase and high crystallinity was synthesized with urea hydrolysis. The as-prepared samples were well characterized in detail. N2 adsorption and desorption result manifests a high surface area of 99.03 m2/g with a pore size of 7.8 nm. Scanning electron microscopy （SEM） and particle size distribution reveal that the diameters of the formed pellets are uniform. Thermogravimetry （TG） analysis result shows that 500 ℃ could be the appropriate temperature for converting Ni（HCO3）2 precursors into NiO via a thermal decomposition process. CO2 and NH3 temperature-programmed desorption results show that Ni（HCO3）2 has explicit acid-base sites. Transmission electron microscopy （TEM） results vividly indicate that the pellets are aggregated by hexagonal platelets and possess porous structures. Ni（HCO3）2 can efficiently catalyze the one-step synthesis of benzoin ethyl ether from benzaldehyde and ethanol, with the conversion ofbenzaldehyde up to 57.5% and nearly 100% selectivity of benzoin ethyl ether.

Synthesis and in vitro-Anti-hepatitis B Virus Activities of Several Ethyl 5-Hydroxy-1H-indole-3-carboxylates

A series of ethyl 5-hydroxyindole-3-earboxylates 6a-10r was designed and synthesized. The structures of all the compounds were confirmed by IR, ^1H NMR, and MS and their anti-hepatitis B virus （HBV） activities were evaluated in 2.2.15 cells. Among them, compound 7g { ethyl 5-hydroxy-2- [ （ 3-methoxyphenylsulfinyl ） methyl ] -1-methyl-4- [ （4-methylpiperazin-1-yl） methyl ]-1H-indole-3-carboxylate} displays a significant anti-HBV activity, which is more potent than the positive control lamivudine.

一锅法制备1-吡啶基-3-哌啶-4-甲酸的合成研究

N杂环类分子是一类重要的医药切块分子,多用作多肽类医药分子的合成原料中间体。报道了一种N杂环类分子1-吡啶基-3-哌啶-4-甲酸新的合成方法。高压反应釜依次加入3-溴吡啶、4-哌啶甲酸乙酯、碳酸钾、N-甲基吡咯烷酮,反应釜密封好,升温至180℃,压力保持0.5MPa,液质监测反应,反应72h,原料反应完毕。将反应体系冷却至室温后抽滤,滤饼用甲醇打浆后再次抽滤,将滤液浓缩后再甲醇重结晶得黄色粉末,产率最高可达46%。该合成方法,碱性高压条件,一锅法得到目标化合物,极大地降低了工业成本,且后处理方法简单且收率高,具有工业化生产前景。

Synthesis and biological evaluation of ethyl 6-alkoxy-7-phenyl-4-hydroxy-3-quinolinecarboxylates against Eimeria tenella

A series of ethyl 6-alkoxy-7-phenyl-4-hydroxy-3-quinolinecarboxylates were designed and synthesized.Their structures were confirmed by ~1H NMR,^(13)C NMR,IR and HRMS.The biological activities were primarily evaluated against Eimeria tenella according to Anticoccidial Index(ACI) method in vivo.The results showed that compounds 5e,5f and 5i exhibited anticoccidial activities against E.tenella at 27 mg kg^(-1).

Synthesis, Bioactivity, and Crystal Structure Analysis of 2-(3-Oxobenzo[d]isothiazol-2(3H)-yl)ethyl Benzoates

Fifteen novel 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl benzoates were synthesi- zed by the condensation of 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one with substituted benzoic acids in dichloromethane. All the compounds were characterized by elemental analysis, IR, ESI-MS and 1H NMR. The crystal structures for 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one （2） and 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl 2-methoxybenzoate （30） have been determined by X-ray crystal structure analysis. Compound 2 （C9H9NO2S） crystallizes in the monoclinic system, space group Pn with a = 10.552（3）, b = 7.849（2）, c = 10.765（4） A, β = 103.128（4）°, V= 868.3（5） A3, Mr = 195.24, Dc = 1.493 Mg.m-3, μ = 0.33 mm-1, F（000） = 408, Z = 4, R= 0.0314 and wR= 0.0628. Compound 30 （C17H15NO4S） crystallizes in the triclinic system, space group P1 with a = 8.028（2）, b = 9.300（2）, c = 10.430（3）A, V= 752.1（3）A3, Mr = 329.36, D,= 1.454 Mg.m-3, p = 0.24 mm-1, F（000） = 344, Z = 2, R = 0.0377 and wR = 0.0904. The preliminary biological test indicated that the title compounds show better growth inhibitory activity against the gram-positive bacteria than the gram-negative bacteria.

Efficient Synthesis of 2-Ethyl-A-ring Analogues of 19-Nor-1α,25-dihydroxy Vitamin D_3

The novel 19 nor l α ,25 dihydroxy vitamin D 3 analogues possessing an ethyl at the 2 position(4 and 5), were synthesized by coupling 25 hydroxy Windaus Grundmann ketone derivative 20 with A ring synthons(15 and 19) respectively. The enantioselective synthesis of substituted bicyclic hexanes structure A ring synthons, started from all cis 3,5 dihydroxy 4 ethyl 1 (methoxycarbonyl)cyclohexane via lipase catalyzd asymmetrization, was demonstrated.

Synthesis and Crystal Structure of a Novel Ethyl 5-(4-(2-Phenylacetamido)phenyl)-1H-pyrazole-3-carboxylate as an Acrosin Inhibitor

The title compound （ethyl5-（4-（2-phenylacetamido）phenyl）-lH-pyrazole-3-carboxylate, C20H19N3O3） was synthesized by the reaction of Claisen condensation, cyclization, reduction and acylation. The structure was characterized by X-ray diffraction, MS, NMR and IR. It belongs to the monoclinic system, space group C2/c with a = 22.723（9）, b = 9.324（4）, c = 18.890（8） A, β = 114.259（6）°, V = 3649（3） A^3, Dc = 1.272 Mg·m^3, Z = 8, Mr = 349.38, p = 0.087 mm^-1, F（000） = 1472, the final R = 0.0615 and wR = 0.1643. The biological test shows that the title compound has a moderate acrosin inhibition activity.

Synthesis, Crystal Structure and Antitumor Activities of N-(2-(1H-indol-3-yl)ethyl)-2-nitroaniline

The title compound, N-(2-(1H-indol-3-yl)ethyl)-2-nitroaniline(C16H15N3O2, Mr = 281.31), has been synthesized by the multicomponent reaction of milder Ullmann, and its structure was characterized by 1H NMR, 13 C NMR, IR, H RMS(ESI) and single-crystal X-ray diffraction. It crystallizes in monoclinic, space group I2/c with a = 15.0212(10), b = 9.4911(6), c = 20.3075(13) A, β = 100.776(7)o, V = 2844.1(3)A3, Z = 8, Dc = 1.314 g/cm3, F(000) = 1184.0, μ = 0.089 mm-1, the final R = 0.0574 and w R = 0.1688 for 1701 observed reflections(I 】 2σ(I)). X-ray analysis indicates three major N(2)–H(2)···O(2), C(13)–H(13)···O(2), N(2)–H(2)···N(3) hydrogen bonds and π-π stacking interactions in the crystal structure. The preliminary biological test shows that the title compound has a good antitumor activity against A549 in vitro with the IC50 value of 35 μmol/L.

Synthesis and Crystal Structure of Ethyl 3-(4-Chlorophenyl)-3,4-dihydro-6-methyl-4-oxo-2-(pyrrolidin-1-yl)furo[2,3-d]pyrimidine-5-carboxylate

The crystal structure of the title compound ethyl 3-（4-chlorophenyl）-3,4-dihydro-6- methyl-4-oxo-2-（pyrrolidin-1-yl）furo[2,3-d]pyrimidine-5-carboxylate （C20H20ClN3O4, Mr= 401.84） has been prepared and determined by single-crystal X-ray diffraction. The crystal is of monoclinic, space group P21/n with a = 20.6215（9）, b = 8.5311（4）, c = 21.6886（9） A^°, β = 91.607（1）°, V = 3814.0（3）A^°^3, Z = 8, Dc = 1.400 g/cm^3, F（000） = 1680, μ = 0.233 mm^-1, R = 0.0718 and wR = 0.1545 for 6717 observed reflections with I 〉 2σ（I）. X-ray diffraction analysis reveals two crystallographically independent molecules in the asymmetric unit.

Scale-up of biomass conversion using 1-ethyl-3-methylimidazolium acetate as the solvent

This scale-up study demonstrated the feasibility of an ionic liquid(IL)pretreatment process at 40 kg scale,using the IL 1-ethyl-3-methylimidazolium acetate([C2C1Im][OAc])as the solvent.The pretreatment was followed by enzymatic hydrolysis through which the process efficiency for biomass conversion to monomeric sugars was determined.The results show that 43 wt%of switchgrass was dissolved in IL after 2 h of pretreatment at 160℃ with 15 wt%solid loading.A 120 h enzymatic hydrolysis of the pretreated switchgrass results in 96%glucan and 98%xylan conversion.[C2C1Im][OAc]pretreatment has been successfully scaled up to 40 kg with improved sugar titers and yields relative to bench scale(6 kg).The mass flow of the overall process was established and the major scale-up challenges of the process were identified.

Long-term and combined effects of N-[2-(nitrooxy)ethyl]-3-pyridinecarboxamide and fumaric acid on methane production,rumen fermentation, and lactation performance in dairy goats

Background:In recent years,nitrooxy compounds have been identified as promising inhibitors of methanogenesis in ruminants.However,when animals receive a nitrooxy compound,a high portion of the spared hydrogen is eructated as gas,which partly offsets the energy savings of CH4mitigation.The objective of the present study was to evaluate the long-term and combined effects of supplementation with N-[2-(nitrooxy)ethyl]-3-pyridinecarboxamide(NPD),a methanogenesis inhibitor,and fumaric acid(FUM),a hydrogen sink,on enteric CH4production,rumen fermentation,bacterial populations,apparent nutrient digestibility,and lactation performance of dairy goats.Results:Twenty-four primiparous dairy goats were used in a randomized complete block design with a 2×2factorial arrangement of treatments:supplementation without or with FUM(32 g/d)or NPD(0.5 g/d).All samples were collected every 3 weeks during a 12-week feeding experiment.Both FUM and NPD supplementation persistently inhibited CH4yield(L/kg DMI,by 18.8%and 18.1%,respectively)without negative influence on DMI or apparent nutrient digestibility.When supplemented in combination,no additive CH4suppression was observed.FUM showed greater responses in increasing the molar proportion of propionate when supplemented with NPD than supplemented alone(by 10.2%vs.4.4%).The rumen microbiota structure in the animals receiving FUM was different from that of the other animals,particularly changed the structure of phylum Firmicutes.Daily milk production and serum total antioxidant capacity were improved by NPD,but the contents of milk fat and protein were decreased,probably due to the bioactivity of absorbed NPD on body metabolism.Conclusions:Supplementing NPD and FUM in combination is a promising way to persistently inhibit CH4emissions with a higher rumen propionate proportion.However,the side effects of this nitrooxy compound on animals and its residues in animal products need further evaluation before it can be used as an animal feed additive.

DFT Study on the Structure of Ionic Liquid 1-Ethyl-3-methylimidazolium Hexafluorophosphate

This paper reports the ab initio and Density Functional Theory (DFT) studies on the structure of the ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM]+[PF6]-). Hartree-Fock (HF) and DFT(B3LYP) methods are respectively used to obtain the stable structure of the gas phase ion pair at the 6-311++G(d, p) basis set level. The theoretical IR spectra of [EMIM]+[PF6]- were obtained from the calculated vibrational frequencies and intensities. The changes of atomic charge population have been investigated using Natural Bond Orbital (NBO) analysis. The computational results show that there may exist hydrogen bonds between the cation and the anion. After ZPE and BSSE corrections, the interaction energy between the cation and the anion is –314.44 kJ?mol-1.

Ab Initio Calculation of Room Temperature Ionic Liquid 1-Ethyl-3-Methyl-Imidazolium Chlorocuprate (Ⅰ)

The Hartree-Fock method has been employed to investigate the electronic structures of EMIM^＋（1-ethyl-3-methyl-imidazolium^＋）, CuCl2^-, Cu2Cl3^-, CuCl3^2-, EMIM＋^-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2- pairs. Full optimization and frequency analyses of EMIM^＋, CuCl2^-, Cu2Cl3^-, CuC13^-, eight initial EMIM^＋-CuCl2^-, six EMIM^＋-Cu2Cl3^-, and four EMIM^＋-CuCl3^2- geometries have been carried out using Gaussian-94 soft-package at 6-31＋G（d,p） basis set level for hydrogen, carbon, nitrogen, chlorine atoms and Hay-Wadt effective core potential for copper atom. The electronic structures of lowest energy of EMIM^＋-CuCl2^-, EMIM＋-Cu2Cl3^-, EMIM^＋-CuCl3^2-, single EMIM^＋, CuCl2^-, Cu2Cl3^-, and CuCl3^2- have been comparatively studied. The calculated results showed that EMIM^＋-CuCl2^- pair conformer of lowest energy was five ring parallel to Cl-Cu-Cl with 3.2A distance, EMIM^＋-CuCl3^2- pair conformer of lowest energy was five ring parallel to CuCl3^2-plane with 3.4A distance, and the optimized EMIM^＋-Cu2Cl3^- pair conformer of lowest energy was five ring perpendicular to Cl-Cu-Cl-Cu-Cl plane with 3.0A distance between the terminal Cl atoms and the 5-ring of EMIM^＋. The cohesion between cations and anions is brought about by C-H. C1 hydrogen bonds that are reinforced by charge assistance. The frequency analyses suggested that all stationary points are minimum because of no appearing of imaginary frequency. The assigned frequencies were in agreement with the experimental report. The low energy of interaction because of the bulkyasymmetry of EMIM＋ and the charge dispersion of cation and anion leads to the low melting point of the ionic liquids, EMIM^＋-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2-. The interaction energy of EMIM^＋-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2- is 309.0 kJ/mol, 316.8 kJ/mol, and 320.2 kJ/mol, respectively. The relationship of interaction energy via distance between cations and anions was also investigated by single point energy scan.

Al_(2)(SO_(4))_(3)催化热解油转化生产酯类燃料

酸类、糖类等不稳定组分的存在是制约热解油直接用作生物燃料的主要因素。为了解决此问题,提出采用Al_(2)(SO_(4))_(3)催化剂将这些不稳定成分酯化为燃料类化合物的途径。首先,分别以单模型化合物左旋葡萄糖或乙酸为原料,考察各种金属硫酸盐催化其转化制备乙酰丙酸乙酯或乙酸乙酯的能力,筛选出催化性能最好的催化剂;其次,以左旋葡萄糖和乙酸的模型混合物为原料,探究Al_(2)(SO_(4))_(3)催化同时转化制备酯类的最佳反应条件;最后,以真实热解油为原料,验证Al_(2)(SO_(4))_(3)在最佳反应条件下催化酯化的可行性。结果表明,酯化后热解油中大部分酸、糖、醛消失,同时产生大量的酯和缩醛,酯类和缩醛类占改性热解油总色谱面积的39.5%。Al_(2)(SO_(4))_(3)能有效将热解油中的酸类、糖类等不稳定组分酯化为燃料类化合物,可为热解油转化制备生物燃料提供借鉴。