With potassium persulfate (KPS) as initiator, graft copolymerization of ethyl acrylate (EA) onto water-soluble hydroxypropyl methylcellulose (HPMC) was investigated in aqueous medium. Effects of monomer concentration,...With potassium persulfate (KPS) as initiator, graft copolymerization of ethyl acrylate (EA) onto water-soluble hydroxypropyl methylcellulose (HPMC) was investigated in aqueous medium. Effects of monomer concentration, initiator concentration, matrix concentration, and reaction temperature on the percentage of grafting (G) and grafting efficiency (G_E) were studied. The results show that G and G_E values both increase with the the increase of EA concentration and KPS concentration; when raising HPMC concentration from 0.12 mmol/L to 0.47 mmol/L, G decreases, while G_E increases;and when raising reaction temperature from 50 ℃ to 65 ℃,G increases, but G_E decreases. In addition, the graft copolymers were characterized by Fourier transform infrared (FTIR) spectra and transmission electron microscopy (TEM) methods.展开更多
Grafting copolymerizations of methyl acrylate(MA) and ethyl acrylate(EA) onto corn starch, respectively, initiated by potassium persulfate-sodium thiosulphate (KPS-STS) redox system, were studied. The structures of po...Grafting copolymerizations of methyl acrylate(MA) and ethyl acrylate(EA) onto corn starch, respectively, initiated by potassium persulfate-sodium thiosulphate (KPS-STS) redox system, were studied. The structures of poly(MA)-g-starch and poly(EA)-g-starch were characterized by IR, SEM and X-ray diffraction. Experimental results show that KPS-STS is an efficient initiation system for grafting of MA and EA onto corn starch. The maximum percent grafting was obtained at [KPS] of 6.0× 10~3 mol/L, [STS] of 1.8× 10 5 mol/L, [M] of 6. 0× 101 mol/L, S:L=4:100 at 40℃ for 6 h. The reactivity order is MA>EA.展开更多
When ethyl 3-fluoroalkyl-3-haloacrylate was treated with excess CH2N2,1-methyl-3-ethoxycarbonyl-4-fluoroalkylpyr azoles(3)and 1-methyl-5-ethoxycarbonyl-4-fluoroalkylpyrazoles(4)were obtained with a ratio of 90-95:10-5...When ethyl 3-fluoroalkyl-3-haloacrylate was treated with excess CH2N2,1-methyl-3-ethoxycarbonyl-4-fluoroalkylpyr azoles(3)and 1-methyl-5-ethoxycarbonyl-4-fluoroalkylpyrazoles(4)were obtained with a ratio of 90-95:10-5 in good yield.展开更多
Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-me...Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-methylene bu-tane-1,4-dioic acid. Hydrogel swelling was measured as a function of the composition of the hydrogel and of the crosslinking agent ratio. High values of swelling have been obtained at very high crosslinking values (【14 wt %) and the equilibrium swelling was reached at very low time (less than 15 minutes). The swelling isotherms consisted of a steep initial portion and then levelled off as asymptotically to the equilibrium swelling limit. The experimental data suggest clearly that the swelling process obeys second-order kinetics. According to this, the kinetics rate constant and the equilibrium water content were determined at different comonomer composition and crosslinker concentration. The calculated kinetic constants ranged from 0.48 to 3.76 ×10-2 min-1 for poly (acrylic acid-co-Q9) hydrogels and from 0.68 to 4.0 ×10-2 min-1 for poly (2-methylene butane-1,4-dioic acid-co-Q9) hydrogels depending on the hydrogels composition. The diffusion process was evaluated for each hydrogel showing a non-Fickian type diffusion. In all cases was observed a considerable increase in diffusion coefficient as Q9 content increases.展开更多
Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTE...Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.展开更多
在10%总添加量下,以乙烯-丙烯酸乙酯(EEA)和乙烯-丙烯酸正丁酯-甲基丙烯酸缩水甘油酯(E-BAGMA)复配的方式,采用双螺杆挤出机熔融共混制备了聚乳酸(PLA)/EEA/E-BA-GMA复合材料,通过万能试验机、扫描电子显微镜(SEM)、旋转流变仪、热失重...在10%总添加量下,以乙烯-丙烯酸乙酯(EEA)和乙烯-丙烯酸正丁酯-甲基丙烯酸缩水甘油酯(E-BAGMA)复配的方式,采用双螺杆挤出机熔融共混制备了聚乳酸(PLA)/EEA/E-BA-GMA复合材料,通过万能试验机、扫描电子显微镜(SEM)、旋转流变仪、热失重分析仪等方法,研究了EEA与E-BA-GMA的复配对PLA相容性、热稳定性和力学性能的影响。结果表明,E-BA-GMA的加入,提高了PLA与EEA的界面黏附力,当E-BA-GMA添加量为3%时,复合材料的相容性较好;EEA/E-BA-GMA复配的加入,对PLA的热稳定性影响不大;EEA/E-BA-GMA复配的加入,提高了PLA的韧性,当EEA/E-BA-GMA的配比为7%/3%时,复合材料的断裂伸长率和缺口冲击强度分别从纯PLA的5.8%和2.1 k J/m^2增加到了164.3%和5.3 k J/m^2。展开更多
文摘With potassium persulfate (KPS) as initiator, graft copolymerization of ethyl acrylate (EA) onto water-soluble hydroxypropyl methylcellulose (HPMC) was investigated in aqueous medium. Effects of monomer concentration, initiator concentration, matrix concentration, and reaction temperature on the percentage of grafting (G) and grafting efficiency (G_E) were studied. The results show that G and G_E values both increase with the the increase of EA concentration and KPS concentration; when raising HPMC concentration from 0.12 mmol/L to 0.47 mmol/L, G decreases, while G_E increases;and when raising reaction temperature from 50 ℃ to 65 ℃,G increases, but G_E decreases. In addition, the graft copolymers were characterized by Fourier transform infrared (FTIR) spectra and transmission electron microscopy (TEM) methods.
文摘Grafting copolymerizations of methyl acrylate(MA) and ethyl acrylate(EA) onto corn starch, respectively, initiated by potassium persulfate-sodium thiosulphate (KPS-STS) redox system, were studied. The structures of poly(MA)-g-starch and poly(EA)-g-starch were characterized by IR, SEM and X-ray diffraction. Experimental results show that KPS-STS is an efficient initiation system for grafting of MA and EA onto corn starch. The maximum percent grafting was obtained at [KPS] of 6.0× 10~3 mol/L, [STS] of 1.8× 10 5 mol/L, [M] of 6. 0× 101 mol/L, S:L=4:100 at 40℃ for 6 h. The reactivity order is MA>EA.
文摘When ethyl 3-fluoroalkyl-3-haloacrylate was treated with excess CH2N2,1-methyl-3-ethoxycarbonyl-4-fluoroalkylpyr azoles(3)and 1-methyl-5-ethoxycarbonyl-4-fluoroalkylpyrazoles(4)were obtained with a ratio of 90-95:10-5 in good yield.
文摘Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-methylene bu-tane-1,4-dioic acid. Hydrogel swelling was measured as a function of the composition of the hydrogel and of the crosslinking agent ratio. High values of swelling have been obtained at very high crosslinking values (【14 wt %) and the equilibrium swelling was reached at very low time (less than 15 minutes). The swelling isotherms consisted of a steep initial portion and then levelled off as asymptotically to the equilibrium swelling limit. The experimental data suggest clearly that the swelling process obeys second-order kinetics. According to this, the kinetics rate constant and the equilibrium water content were determined at different comonomer composition and crosslinker concentration. The calculated kinetic constants ranged from 0.48 to 3.76 ×10-2 min-1 for poly (acrylic acid-co-Q9) hydrogels and from 0.68 to 4.0 ×10-2 min-1 for poly (2-methylene butane-1,4-dioic acid-co-Q9) hydrogels depending on the hydrogels composition. The diffusion process was evaluated for each hydrogel showing a non-Fickian type diffusion. In all cases was observed a considerable increase in diffusion coefficient as Q9 content increases.
文摘Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.
文摘在10%总添加量下,以乙烯-丙烯酸乙酯(EEA)和乙烯-丙烯酸正丁酯-甲基丙烯酸缩水甘油酯(E-BAGMA)复配的方式,采用双螺杆挤出机熔融共混制备了聚乳酸(PLA)/EEA/E-BA-GMA复合材料,通过万能试验机、扫描电子显微镜(SEM)、旋转流变仪、热失重分析仪等方法,研究了EEA与E-BA-GMA的复配对PLA相容性、热稳定性和力学性能的影响。结果表明,E-BA-GMA的加入,提高了PLA与EEA的界面黏附力,当E-BA-GMA添加量为3%时,复合材料的相容性较好;EEA/E-BA-GMA复配的加入,对PLA的热稳定性影响不大;EEA/E-BA-GMA复配的加入,提高了PLA的韧性,当EEA/E-BA-GMA的配比为7%/3%时,复合材料的断裂伸长率和缺口冲击强度分别从纯PLA的5.8%和2.1 k J/m^2增加到了164.3%和5.3 k J/m^2。
