i-PP/EPR REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED iPP PARTICLES

i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated with triethyaluminum was added in the preparation of porous iPP particles to introduce hydroxyl groups and thus enhance the ability for chemically supporting the metallocene catalyst.The effects of MAO/Zr ratio and monomer composition in feed on the reaction activity and property of polymer were i...

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH (CpCH_2CH_2CH=CH_2)_2MCl_2(M=Zr,Hf)AND Cp_2ZrCl_2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ^(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.

Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization

The highly efficient method has been developed for the synthesis of NHC·VOCl_(3) containing symmetrical or unsymmetrical Nheterocyclic carbene(NHC) ligands by the transmetallation reaction of NHC·AgCl with VOCl_(3).The total isolated yield of VOCl_(3)[1,3-(2,4,6-Me_(3)C_(6)H_(2))_(2)(NCH=)_(2)C:](V4') reached 86% by transmetallation reaction,which is much higher than that(48%) by direct coordination method.This methodology has also been used to synthesize the novel vanadium complexes containing unsymmetrical NHC ligands of VOCl_(3)[PhCH_(2)NCH=CHNR)C:](V5',R=2,4,6-Me_(3)C_(6)H_(2);V6',R=2,4-Me_(2)-6-Ph-C_(6)H_(2);V7',R=2,6-^(i)Pr_(2)-C_(6)H_(3)) with high yield,which could not be obtained by direct coordination method.The catalytic activity and copolymerization ability would be improved by introducing unsymmetrical NHC ligands due to their less steric bulky effect.The vanadium complex V5' containing unsymmetrical NHC ligand exhibits higher catalytic activity(3.7×10^(5)g_(copolymer)·mol^(-1) of V·h^(-1)) than that of V4' containing symmetrical NHC ligand.Moreover,the higher propylene incorporation ratio(45.6 mol%) in the copolymers of ethylene with propylene could be obtained by using V5' than that(39.9%) by using V4'.The results would provide a highly efficient strategy for the synthesis of early transition metal complexes containing versitile NHC ligands,affording the catalyst with both high catalytic activity and copolymerization ability for the synthesis of high performance polyolefin elastomers.