Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization

The highly efficient method has been developed for the synthesis of NHC·VOCl_(3) containing symmetrical or unsymmetrical Nheterocyclic carbene(NHC) ligands by the transmetallation reaction of NHC·AgCl with VOCl_(3).The total isolated yield of VOCl_(3)[1,3-(2,4,6-Me_(3)C_(6)H_(2))_(2)(NCH=)_(2)C:](V4') reached 86% by transmetallation reaction,which is much higher than that(48%) by direct coordination method.This methodology has also been used to synthesize the novel vanadium complexes containing unsymmetrical NHC ligands of VOCl_(3)[PhCH_(2)NCH=CHNR)C:](V5',R=2,4,6-Me_(3)C_(6)H_(2);V6',R=2,4-Me_(2)-6-Ph-C_(6)H_(2);V7',R=2,6-^(i)Pr_(2)-C_(6)H_(3)) with high yield,which could not be obtained by direct coordination method.The catalytic activity and copolymerization ability would be improved by introducing unsymmetrical NHC ligands due to their less steric bulky effect.The vanadium complex V5' containing unsymmetrical NHC ligand exhibits higher catalytic activity(3.7×10^(5)g_(copolymer)·mol^(-1) of V·h^(-1)) than that of V4' containing symmetrical NHC ligand.Moreover,the higher propylene incorporation ratio(45.6 mol%) in the copolymers of ethylene with propylene could be obtained by using V5' than that(39.9%) by using V4'.The results would provide a highly efficient strategy for the synthesis of early transition metal complexes containing versitile NHC ligands,affording the catalyst with both high catalytic activity and copolymerization ability for the synthesis of high performance polyolefin elastomers.

i-PP/EPR REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED iPP PARTICLES

i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated with triethyaluminum was added in the preparation of porous iPP particles to introduce hydroxyl groups and thus enhance the ability for chemically supporting the metallocene catalyst.The effects of MAO/Zr ratio and monomer composition in feed on the reaction activity and property of polymer were i...

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH (CpCH_2CH_2CH=CH_2)_2MCl_2(M=Zr,Hf)AND Cp_2ZrCl_2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ^(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.

Copolymerization Kinetics of Ethylene Oxide and Propylene Oxide

The copolymerization kinetics of ethylene oxide and propylene oxide in an atomizing-circulation reactorunder semi-continuous operation is studied which is of great importance for molecular designation. The kineticparameters are obtained by numerical optimization of the kinetic model.

Ethylene Copolymerization with Linear and End-Cyclized Olefins via a Metallocene Catalyst:Polymerization Behavior and Thermal Properties of Copolymers

Olefin solution polymerization can be used to obtain high-performance polyolefin materials that cannot be obtained via other polymerization processes.Polyolefin elastomers(POE)are a typical example.Due to cost,only a few linear a-olefins(e.g.,1-butene,1-hexene,and 1-octene)are used as comonomers in solution polymerization in industry.However,a-olefin comonomers with other structures may have different effects on polymerization in comparison with common linear ones.Moreover,the properties of the corresponding materials may differ significantly.In this work,copolymers of ethylene with linear and endcyclized a-olefins are synthesized using a metallocene catalyst.The copolymerization of ethylene with linear a-olefins results in a higher turn-over frequency(TOF)and lower incorporation than copolymerization with end-cyclized a-olefins,which may indicate that end-cyclized a-olefins have a higher coordination probability and lower insertion rate.In this reaction,the comonomer is distributed randomly in the polymer chain and efficiently destroys crystallization.End-cyclized a-olefins exhibit a much stronger crystallization destructive capacity(CDC)in the copolymer than linear a-olefins,possibly because linear a-olefins act mainly in the radial direction of the main chain of the polymer,while end-cyclized a-olefins act mainly in the axial direction of the main chain.

RANDOM COPOLYMER OF PROPYLENE OXIDE AND ETHYLENE OXIDE PREPARED BY DOUBLE METAL CYANIDE COMPLEX CATALYST

Copolymerization of propylene oxide (PO) and ethylene oxide (EO) using double metal cyanide (DMC) complex as the catalyst was carried out. The structure of random copolymers was confirmed by C-13-NMR and IR spectra. H-1-NMR analysis shows that the EO content in the copolymer is the same as that in the initial monomer feed. Moderate molecular weight copolymers with various EO content were obtained and their values of molecular weight distribution (MWD) fell in the range of 1.21-1.55. It was found that the molecular weight of copolymers is controlled by the mass ratio of EO+PO to initiator moles used, The reaction rate as well as polymer yield decrease with increasing EO content in the feed composition.

Effects of Hydrophobicity of Ethylene Oxide-Propylene Oxide Copolymers on Phase Diagrams of Aqueous Two-Phase Systems and Partition Behaviors of Cephalexin and 7-Aminodeacetoxicephalos-poranic Acid

A series of ethylene oxide (EO)-propylene oxide (PO) randomco-polymers (EOPO) were used to form aqueous two-phase systems (ATPS)with ammonium sulfate. Effects of EOPO's properties on the phaseseparation behaviors and on the partition of cephalexin and7-aminodesacetoxicephalosporanic acid (7-ADCA) in ATPS wereinvestigated. Both the molar mass and molar ratio of EO to PO of EOPOcould greatly influence partition behaviors of cephalexin and 7-ADCAas well as the binodal curve of ATPS.

CRYSTALLIZATION KINETICS OF ETHYLENE-PROPYLENE COPOLYMERS PREPARED BY LIVING COORDINATION POLYMERIZATION

In this paper,crystallization kinetics of a series of ethylene-propylene copolymers prepared by living polymerization coordination catalyzed by a fluorinated bis(phenoxyimine)Ti catalyst(FI-EP copolymers)was studied,and was compared with that of ethylene-propylene copolymers prepared by a conventional Ziegler-Natta catalyst(ZN-EP copolymers).It is found that,the Avrami exponent and the crystallization rate constant of the FI-EP and ZN-EP copolymer show similar dependence on crystallization temperature,but t...

Synthesis of Polynorbornene-Poly(ethylene-co-propylene)Diblock Copolymer

Transformation of living ring-opening metathesis polymerization into coordination polymerization by converting the titanacyclobutane group attached to a polynorbornene chain into titanocene alkoxide has been used for the synthesis of polynorbornene-poly(ethylene-co-propylene) block copolymer. Preliminary characterizations of the copolymerization products by solvent extraction and C-13 NMR spectrum are reported.

INFLUENCE OF DIALKYLZINC IN RARE-EARTH TERNARY CATALYST ONTHE COPOLYMERIZATION OF CARBON DIOXIDE AND PROPYLENE OXIDE

Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.

CATALYTIC COPOLYMERIZATION OF STYRENE AND ETHYLENE BY NEUTRAL NICKEL(Ⅱ) COMPLEXES IN EMULSION

Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of the s...

High Efficieney Synthesis of Isotaetie Polypropylene and Linear Polyethylene Using a New C_2-symmetric Carbon-bridged Zirconocene Catalyst

Ansa-Cyclohexyl-bis（4,5,6,7-tertrahydro-l-indenyl） zirconium dichloride （5） was used as catalyst for propylene and ethylene polymerization together with methyl aluminoxane （MAO） as the cocatalyst. Isotactic polypropylene （PP） was obtained with the highest activity of 6.37× 107g PP （molZr）^-1h^-1. The mesomeso （mmmmm） pentads sequence content of PP was determined by 13C NMR spectroscopy. The dependence of the microstructure on the reaction temperature and the AI/Zr molar ratio was examined and the catalytic activity of complex 5 was compared with that of the similar ansa-zirconocene 3. The high activity of the new zirconocene 5 for propylene isospectic polymerization at high temperature （60℃） is the result of its unique bridged-group structure. Complex 5/MAO displays also high catalytic activity of 0.46× 10^6 to 9.87× 10^6g PE（molZr）^-h^-in the homo-polymerization of ethylene, The visometric molecular weight of PE ranges from 0.97×10^4 to 11.16×10^4 g.mol^- under the given conditions.^13C NMR spectroscopy analysis proves the PE to be linear polyethylene （LPE）.

Synthesis of 2-methylpyrazine from cyclocondensation of ethylene diamine and propylene glycol over promoted copper catalyst

The 2-methylpyrazine was synthesized by catalytic reaction of ethylene diamine and propylene glycol at 380 ℃. The alumina supported copper catalysts with promoter were prepared by impregnation method, characterized by ICP-AES, BET and TPR. The results demonstrated that the dehydrogenation was improved by addition of chromium promoter. The selectivity of 2-methylpyrazine reached 84.75%, while the conversions of reactants were also enhanced.

COPOLYMERIZATION OF PROPYLENE WITH HINDERED PIPERIDINE MONOMER OVER A HIGH ACTIVITY SUPPORTED ZIEGLER-NATTA CATALYST

Copolymerization of propylene and hindered piperidine monomers was carried out over a high activity supported Ziegler-Natta catalyst, using Al(C2H5)(3) as cocatalyst. Factors which affect the copolymerization were studied, The copolymers exhibited high light stability without adding extra light stabilizers. A self-stabilized polypropylene was prepared.

RING OPENING COPOLYMERIZATION OF SUCCINIC ANHYDRIDE-ETHYLENE OXIDE BY Al(Ⅲ) ORGANOMETALLIC CATALYSTS

Ring opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO)was successfully carried out by using a series of aluminum-based catalyst in 1,4-dioxane at62±2℃. The results showed that in-situ AlR_3-H_2O (R=ethyl, iso-butyl) catalysts gavehigher molecular weight (M_w～10~4), while Al(OR)_3 catalysts gave the higher alternatingcopolymer structure with slightly lower molecular weight. The in-situ AlR_3-H_2O systemshave been evaluated in more detail for the reaction which showed the optimum H_2O/Almolar ratio to be 0.5. The copolymers with different composition (F_(SA)/F_(EO)= 36/64to 45/55 mol/mol) were synthesized by using different monomer feed ratio. The melt-ing point (T_m), glass transition temperature (T_g) and enthalpy of fusion (ΔH_f) of thesecopolymers are depended on the copolymer composition and in the range of 87～102℃,-12～-18℃, and 37～66J/g, respectively. The second heating scan of DSC also in-dicated that the higher alternating copolymer was more easily recrystallized. The onsetdecomposition temperature was more than 300℃ under nitrogen and influenced by thecopolymer composition.

Research on Ethylene and Propylene Formation during Catalytic Pyrolysis of Methylcyclohexane

The influence of operating parameters and type of zeolite catalysts on formation of ethylene and propylene during catalytic pyrolysis of methylcyclohexane (MCH) was studied in a laboratory fixed fluidized bed reactor. The results indicated that higher reaction temperature and lower WHSV tended to produce more ethylene and propylene, among which the reaction temperature was an important factor influencing the ethylene formation. Compared with the FAU and BEA type zeolites, the MFI structured zeolite catalyst, thanks to more acid sites and smaller pore diameter of the catalyst, was conducive to the formation of ethylene and propylene. The protonation occurred on different C—C bonds and C—H bonds in the carbon chain of MCH led to different product slates, and the protonation on C—C bonds located at naphthenic ring was favorable to the formation of ethylene and propylene.

Commercial Application of CPP for Producing Ethylene and Propylene from Heavy Oil Feed

A new process named CPP (Catalytic Pyrolysis Process) for producing ethylene andpropylene from heavy oil feedstock has been developed. The catalyst CEP was specially designedfor this process, which has bi-functional catalytic activities for both carbonium ion reaction andfree radical reaction, so as to maximize the yields of ethylene and propylene. The commercial trialshowed that the yield of ethylene and propylene was 20.37% and 18.23% respectively inmaximum ethylene operation with Daqing AR as feedstock, and the yield of ethylene and propylenewas 9.77% and 24.60% respectively in maximum propylene operation by using the same feedstock.Compared with steam cracker, the feed cost of CPP is much lower for producing ethylene andpropylene.

Electromechanical Properties of Ethylene Propylene Diene Elastomers: Effect of Ethylene Norbornene Content

Ethylene propylene diene elastomers (EPDM) of various side chains and molecular weights were prepared as thin discs and the effects of electric field strength and temperature on the electromechanical properties were investigated. The electrical conductivity, the dielectric constant, the storage and loss moduli (G' and G'), the storage modulus response (ΔG’1000 V/mm), and the storage modulus sensitivity (ΔG’1000 V/mm/G’0) of the elastomers of different ethylene norbornene (ENB) contents and molecular weights were measured under electric field strengths varying from 0 V/mm to 1000 V/mm and at temperatures between 300 K and 380 K. The storage modulus response and sensitivity increase with increasing molecular weight and dielectric constant, consistent with the existing theory. However, for the case of EPDMs with different ENB contents, the storage modulus response and sensitivity vary inversely with the dielectric constant. EDPM is potentially a new type of electroactive materials.

Strong influences of polymerization temperature on ethylene/1-hexene copolymerization catalyzed by (2-PhInd)_2ZrCl_2/methyl aluminoxane

Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0 °C and 50 °C respectively. High copolymerization activity and 1-hexene incorporation were observed at 0 °C, with the co- polymer formed having random sequence distribution and narrow molecular weight distribution. Ethylene polymerization at 50 °C showed high activity, but copolymerization at 50 °C showed much lower activity, which decreased sharply with increasing 1-hexene concentration in the monomer feed. Copolymer formed at 50 °C showed blocky sequence distribution and broad mo- lecular weight distribution. A mechanism model based on ligand rotation hindered by the propagation chain has been proposed to qualitatively explain the observed phenomena.

Ring-opening Copolymerization of Adipic Anhydride and Propylene Oxide Catalyzed by Yttrium Triflates

The ring-opening copolymerization of adipic anhydride with propylene oxide was carried out with yttrium triflates as a catalyst. Poly（propylene adipate） could be synthesized by controlling the copolymerization conditions. The copolymerization procedure was tracked by ^1H NMR analyses.