The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were ...The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.展开更多
Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber c...Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber contains ammonium polyphosphate （APP） as acid source, double pentaerythritol （D-PER） as carbon source and melamine （MN） as gas source. The effects of nano-filler sepiolite and boehmite on the fire-resistant property of EVM rubber based on IFR system were investigated. The test results show that the system with nano-filler of sepiolite B10 has the best fire-resistant property. The process of smoke emission and thermal decomposition, the element composition of char surface and the micro morphology of intumecent char layer of the EVM IFR system with nano-filler were also studied by NBS chamber, thermogravimetric （TG） analysis, X- ray photoelectron spectroscopy （XPS） and scanning electron microscope （SEM）.展开更多
Ethylene-vinyl acetate copolymer(EVA) as a kind of effective polymeric pour point depressant has been extensively used in the pipeline transportation of crude oil to inhibit wax deposition and improve the low temperat...Ethylene-vinyl acetate copolymer(EVA) as a kind of effective polymeric pour point depressant has been extensively used in the pipeline transportation of crude oil to inhibit wax deposition and improve the low temperature fluidity of crude oil. In this work, molecular dynamics simulations were performed to investigate the effect of EVA on wax-hydrate coexistence system to evaluate the application potentiality of EVA to the flow assurance of deep-sea oil-gas-water multiphase flow system. Our simulation results reveal that wax molecules gradually stretched and stacked from random coiling to a directional and ordered crystalline state during the process of wax solidification. The strong affinity of polar vinyl acetate side chains of EVA to neighboring water molecules made the EVA molecule prefer being in a curly state,which disrupted the ordered crystallization of surrounding wax molecules and delayed the solidification rate of wax cluster. In addition, it is found that EVA cocrystallized with wax molecules to form eutectic when the wax was fully solidified. The simulation results of hydrate nucleation and growth show that the EVA molecule displayed a two-sided effect on gas adsorption of wax crystals, which was the key factor that affected the nucleation and growth of hydrates in the methane-water system. The nonpolar hydrocarbon backbone of EVA increased the diffusion rate of methane and water, allowing more methane to diffuse to the surface of wax crystals, reducing the methane concentration in aqueous solutions and inhibiting the hydrate formation. On the other hand, the nonpolar vinyl acetate chains had a repulsive effect on methane, which reduced the adsorption area of methane on the eutectic surface and decreased the adsorption threshold value of the wax crystal. The excluded methane molecules would continue dissociating in the aqueous phase and participating in the nucleation and growth process of hydrates.Therefore, the probability of hydrate formation would be increased. It was worth noting that the inhibition performance of EVA on hydrate formation mainly played a significant role in the system with small wax crystal, while its hydrate promotion effect played a dominant role in the system with lager wax crystal. In summary, EVA could significantly inhibit both of the wax and hydrate deposition for the waxgas-water multiphase system with low wax content. When the wax content in the system was high, the role of EVA was mainly played in the alleviation of wax crystallization rather than the gas hydrates. The results of the present work can contribute to a better understanding of EVA on wax deposition and hydrate formation, and provide theoretical support of the potential industrial applications of EVA.展开更多
Poly (vinyl chloride)/ethylene-vinyl acetate/montmorillonite (PVC/EVA/OMMT) composites were prepared by melt blending method. Two kinds of montmorillonites were organically modified by trimethyloctadecyl ammonium and ...Poly (vinyl chloride)/ethylene-vinyl acetate/montmorillonite (PVC/EVA/OMMT) composites were prepared by melt blending method. Two kinds of montmorillonites were organically modified by trimethyloctadecyl ammonium and dimethyl bis (hydrogenated tallow) ammonium, respectively. The morphology and tensile properties of the resultant composites were discussed in terms of the modifier type and OMMT content. The PVC/EVA/OMMT composites have intercalated structure, which is independent of the polarity of the modifiers, while the tensile properties show strong dependence on the modifier type. The OMMT modified by polar modifier gives higher tensile ductile and strength of PVC/EVA/OMMT composites.展开更多
The reducing water effectiveness of EVA latex and powder was observed. Adhesive strength of EVA modified mortar to tile under different curing condition was studied. And the adhesive strengths of mortars modified by E...The reducing water effectiveness of EVA latex and powder was observed. Adhesive strength of EVA modified mortar to tile under different curing condition was studied. And the adhesive strengths of mortars modified by EVA latex and by EVA powder were compared. The results show that the reducing water effectiveness is improved by 36.12% and 21.55%, respectively, when the content of EVA latex and powder are 8% and 4%. EVA latex and powder can improve the adhesive strength of modified mortar to tile under the standard curing, high temperature curing, and freeze-thaw circle curing. EVA latex can improve the water resistance obviously, besides improve the adhesive strengths of standard curing and high temperature curing, comparing with EVA powder.展开更多
The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl ace...The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl acetate （EVA） copolymer at high loading （5 wt%） was studied. Transmission electron microscopy indicated a homogeneous dispersion of GNSs and CNTs in EVA obtained by a solution dispersion process. Fourier-transform infrared spectroscopy and differential scanning calorimetry measurements showed that 1D CNTs and 2D GNSs acted as effective nucleating agents, with a noticeably increased onset crystallization temperature of EVA. A high weight fraction of nano-fillers slowed the overall crystallization rate of composites. At the same crystallization temperatute, the crystallization behavior of GNS/EVA composites was slowed compared to that of the CNT/EVA ones owing to larger nucleus barrier and activation energy of diffusion. Dynamic mechanical relaxation and rheology behavior of CNT/EVA and GNS/EVA composites demonstrated that the planar structure of the GNSs had an intensively negative effect on EVA chain mobility due to interactions between nano- fillers and polymer chains, as well as spatial restriction.展开更多
Si-based solar cells have dominated the entire photovoltaic market,but remain suffering from low power conversion efficiency(PCE),partly because of the poor utilization of ultraviolet(UV)light.Europium(III)(Eu^3+)comp...Si-based solar cells have dominated the entire photovoltaic market,but remain suffering from low power conversion efficiency(PCE),partly because of the poor utilization of ultraviolet(UV)light.Europium(III)(Eu^3+)complexes with organic ligands are capable of converting UV light into strong visible light,which makes them ideal light converter to increase the efficiency of solar cells.However,the low stability of such complexes seriously hampers their practical applications.In this work,we report a highly stable and luminescent ethylene-vinyl acetate(EVA)copolymer film consisting of a Eu^3+complex as a down-shift material,Eu(ND)4 CTAC(ND=4-hydroxy-2-methyl-1,5-naphthyridine-3-carbonitrile,CTAC=hexadecyl trimethyl ammonium chloride),coating of which onto the surface of large area polycrystalline silicon solar cells(active area:110 cm^2)results in an increase of PCE from 15.06%to 15.57%.Remarkable stability of the luminescent film was also demonstrated under lightsoaking test for 500 h,and no obvious luminescence degradation can be observed.The remarkable enhancement of the conversion efficiency by 0.51%absolute on such a large active area,together with the high stability of the luminescent film,demonstrates a prospect for the implementation of the films in photovoltaic industry.展开更多
Nano-SiO2 and/or MoO3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber （EVA/NBR） blends containing magnesium hydroxide （MH） and red phosphorus （RP） to further improve the mechanical properties,...Nano-SiO2 and/or MoO3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber （EVA/NBR） blends containing magnesium hydroxide （MH） and red phosphorus （RP） to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-SiO2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-SiO2 and MoO3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-SiO2 and MoO3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that MoO3 aggregated in solid phase during combustion.展开更多
The paper deals with the problem of material dispersion using supercritical fluid media. At the same time, emphasis is made on modifications(SAS, GAS, SEDS and ASES) of the supercritical fluid anti-solvent method of d...The paper deals with the problem of material dispersion using supercritical fluid media. At the same time, emphasis is made on modifications(SAS, GAS, SEDS and ASES) of the supercritical fluid anti-solvent method of dispersion. The results of SAS method implementation for dispersion of pure polycarbonate and polycarbonate doped with "CdSe/CdS-core/shell" quantum dots(carried out in the pressure range of 8.0-25.0 MPa at temperatures of 313.15 K and 358.15 K) are submitted. The range of the operating parameters has been established through the example of pure polycarbonate dispersion, which provides the production of nanoparticles with the size range of 10-100 nm. Encapsulation of Cd Se/Cd S quantum dots into polycarbonate using the SAS method has no effect on optical properties of the encapsulated quantum dots. The results of paracetamol dispersion using the SEDS method are presented. The effect of operating conditions of the paracetamol dispersion process on morphology of the obtained product is described. Co-dispersion of ethylene–vinyl acetate copolymers and low-density polyethylene mixtures by SEDS method has been carried out under pressures of 8.0-25.0 MPa at temperatures of 313 K, 323 K, and 333 K. The comparison of melting and crystallization between the resulting copolymer mixtures and mixtures with the same composition obtained by mixing in the liquid melt, has shown that implementation of SEDS results in an increase of crystallinity degree of the polymer mixtures.展开更多
文摘The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.
基金Sponsored by Project in National Key Technology R&D Program(2006BAE03B05-2)
文摘Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber contains ammonium polyphosphate （APP） as acid source, double pentaerythritol （D-PER） as carbon source and melamine （MN） as gas source. The effects of nano-filler sepiolite and boehmite on the fire-resistant property of EVM rubber based on IFR system were investigated. The test results show that the system with nano-filler of sepiolite B10 has the best fire-resistant property. The process of smoke emission and thermal decomposition, the element composition of char surface and the micro morphology of intumecent char layer of the EVM IFR system with nano-filler were also studied by NBS chamber, thermogravimetric （TG） analysis, X- ray photoelectron spectroscopy （XPS） and scanning electron microscope （SEM）.
基金financial support received from National Natural Science Foundation of China(22178378 and 22127812)"Tianchi Talent"Recruitment Program,Xinjiang Tianshan Innovation Team(2022TSYCTD0002)Xinjiang Uygur Region"One Case,One Policy"Strategic Talent Introduction Project(XQZX20240054)are gratefully acknowledged.
文摘Ethylene-vinyl acetate copolymer(EVA) as a kind of effective polymeric pour point depressant has been extensively used in the pipeline transportation of crude oil to inhibit wax deposition and improve the low temperature fluidity of crude oil. In this work, molecular dynamics simulations were performed to investigate the effect of EVA on wax-hydrate coexistence system to evaluate the application potentiality of EVA to the flow assurance of deep-sea oil-gas-water multiphase flow system. Our simulation results reveal that wax molecules gradually stretched and stacked from random coiling to a directional and ordered crystalline state during the process of wax solidification. The strong affinity of polar vinyl acetate side chains of EVA to neighboring water molecules made the EVA molecule prefer being in a curly state,which disrupted the ordered crystallization of surrounding wax molecules and delayed the solidification rate of wax cluster. In addition, it is found that EVA cocrystallized with wax molecules to form eutectic when the wax was fully solidified. The simulation results of hydrate nucleation and growth show that the EVA molecule displayed a two-sided effect on gas adsorption of wax crystals, which was the key factor that affected the nucleation and growth of hydrates in the methane-water system. The nonpolar hydrocarbon backbone of EVA increased the diffusion rate of methane and water, allowing more methane to diffuse to the surface of wax crystals, reducing the methane concentration in aqueous solutions and inhibiting the hydrate formation. On the other hand, the nonpolar vinyl acetate chains had a repulsive effect on methane, which reduced the adsorption area of methane on the eutectic surface and decreased the adsorption threshold value of the wax crystal. The excluded methane molecules would continue dissociating in the aqueous phase and participating in the nucleation and growth process of hydrates.Therefore, the probability of hydrate formation would be increased. It was worth noting that the inhibition performance of EVA on hydrate formation mainly played a significant role in the system with small wax crystal, while its hydrate promotion effect played a dominant role in the system with lager wax crystal. In summary, EVA could significantly inhibit both of the wax and hydrate deposition for the waxgas-water multiphase system with low wax content. When the wax content in the system was high, the role of EVA was mainly played in the alleviation of wax crystallization rather than the gas hydrates. The results of the present work can contribute to a better understanding of EVA on wax deposition and hydrate formation, and provide theoretical support of the potential industrial applications of EVA.
文摘Poly (vinyl chloride)/ethylene-vinyl acetate/montmorillonite (PVC/EVA/OMMT) composites were prepared by melt blending method. Two kinds of montmorillonites were organically modified by trimethyloctadecyl ammonium and dimethyl bis (hydrogenated tallow) ammonium, respectively. The morphology and tensile properties of the resultant composites were discussed in terms of the modifier type and OMMT content. The PVC/EVA/OMMT composites have intercalated structure, which is independent of the polarity of the modifiers, while the tensile properties show strong dependence on the modifier type. The OMMT modified by polar modifier gives higher tensile ductile and strength of PVC/EVA/OMMT composites.
文摘The reducing water effectiveness of EVA latex and powder was observed. Adhesive strength of EVA modified mortar to tile under different curing condition was studied. And the adhesive strengths of mortars modified by EVA latex and by EVA powder were compared. The results show that the reducing water effectiveness is improved by 36.12% and 21.55%, respectively, when the content of EVA latex and powder are 8% and 4%. EVA latex and powder can improve the adhesive strength of modified mortar to tile under the standard curing, high temperature curing, and freeze-thaw circle curing. EVA latex can improve the water resistance obviously, besides improve the adhesive strengths of standard curing and high temperature curing, comparing with EVA powder.
基金supported by the National Science Fund for Distinguished Young Scholars(No.50925311)the National Natural Science Foundation of China(Nos.20976112,51033004)
文摘The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl acetate （EVA） copolymer at high loading （5 wt%） was studied. Transmission electron microscopy indicated a homogeneous dispersion of GNSs and CNTs in EVA obtained by a solution dispersion process. Fourier-transform infrared spectroscopy and differential scanning calorimetry measurements showed that 1D CNTs and 2D GNSs acted as effective nucleating agents, with a noticeably increased onset crystallization temperature of EVA. A high weight fraction of nano-fillers slowed the overall crystallization rate of composites. At the same crystallization temperatute, the crystallization behavior of GNS/EVA composites was slowed compared to that of the CNT/EVA ones owing to larger nucleus barrier and activation energy of diffusion. Dynamic mechanical relaxation and rheology behavior of CNT/EVA and GNS/EVA composites demonstrated that the planar structure of the GNSs had an intensively negative effect on EVA chain mobility due to interactions between nano- fillers and polymer chains, as well as spatial restriction.
基金supported by the National Natural Science Foundation of China (21771050)the Natural Science Foundation of Hebei Province (B2016202147 and B2016202149)+2 种基金the Educational Committee of Hebei Province (LJRC021 and QN2015172)Hebei Province Natural Science Foundation (B2017202048)Tianjin Natural Science Foundation (18JCYBJC17200)
文摘Si-based solar cells have dominated the entire photovoltaic market,but remain suffering from low power conversion efficiency(PCE),partly because of the poor utilization of ultraviolet(UV)light.Europium(III)(Eu^3+)complexes with organic ligands are capable of converting UV light into strong visible light,which makes them ideal light converter to increase the efficiency of solar cells.However,the low stability of such complexes seriously hampers their practical applications.In this work,we report a highly stable and luminescent ethylene-vinyl acetate(EVA)copolymer film consisting of a Eu^3+complex as a down-shift material,Eu(ND)4 CTAC(ND=4-hydroxy-2-methyl-1,5-naphthyridine-3-carbonitrile,CTAC=hexadecyl trimethyl ammonium chloride),coating of which onto the surface of large area polycrystalline silicon solar cells(active area:110 cm^2)results in an increase of PCE from 15.06%to 15.57%.Remarkable stability of the luminescent film was also demonstrated under lightsoaking test for 500 h,and no obvious luminescence degradation can be observed.The remarkable enhancement of the conversion efficiency by 0.51%absolute on such a large active area,together with the high stability of the luminescent film,demonstrates a prospect for the implementation of the films in photovoltaic industry.
基金financially supported by the National Natural Science Foundation of China(Nos.21374004 and 51373018)
文摘Nano-SiO2 and/or MoO3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber （EVA/NBR） blends containing magnesium hydroxide （MH） and red phosphorus （RP） to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-SiO2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-SiO2 and MoO3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-SiO2 and MoO3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that MoO3 aggregated in solid phase during combustion.
基金supported by the Russian Foundation for Basic Research and the Government of the Republic of Tatarstan within the framework of Research Project No. 18-48-160013
文摘The paper deals with the problem of material dispersion using supercritical fluid media. At the same time, emphasis is made on modifications(SAS, GAS, SEDS and ASES) of the supercritical fluid anti-solvent method of dispersion. The results of SAS method implementation for dispersion of pure polycarbonate and polycarbonate doped with "CdSe/CdS-core/shell" quantum dots(carried out in the pressure range of 8.0-25.0 MPa at temperatures of 313.15 K and 358.15 K) are submitted. The range of the operating parameters has been established through the example of pure polycarbonate dispersion, which provides the production of nanoparticles with the size range of 10-100 nm. Encapsulation of Cd Se/Cd S quantum dots into polycarbonate using the SAS method has no effect on optical properties of the encapsulated quantum dots. The results of paracetamol dispersion using the SEDS method are presented. The effect of operating conditions of the paracetamol dispersion process on morphology of the obtained product is described. Co-dispersion of ethylene–vinyl acetate copolymers and low-density polyethylene mixtures by SEDS method has been carried out under pressures of 8.0-25.0 MPa at temperatures of 313 K, 323 K, and 333 K. The comparison of melting and crystallization between the resulting copolymer mixtures and mixtures with the same composition obtained by mixing in the liquid melt, has shown that implementation of SEDS results in an increase of crystallinity degree of the polymer mixtures.
