Synthesis of plant-based biogenic jarosite nanoparticles using Azadirachta indica and Eucalyptus gunni leaf extracts and its application in Fenton degradation of dicamba

Bio-jarosite,an iron mineral synthesized biologically using bacteria,is a substitute for iron catalysts in the Fenton oxidation of organic pollutants.Iron nanocatalysts have been widely used as Fenton catalysts because they have a larger surface area than ordinary catalysts,are highly recyclable,and can be treated efficiently.This study aimed to explore the catalytic properties of bio-jarosite iron nanoparticles syn-thesized with green methods using two distinct plant species:Azadirachta indica and Eucalyptus gunni.The focus was on the degradation of dicamba via Fenton oxidation.The synthesized nanoparticles exhibited different particle size,shape,surface area,and chemical composition characteristics.Both particles were effective in removing dicamba,with removal efficiencies of 96.8%for A.indica bio-jarosite iron nano-particles(ABFeNPs)and 93.0%for E.gunni bio-jarosite iron nanoparticles(EBFeNPs)within 120 min of treatment.Increasing the catalyst dosage by 0.1 g/L resulted in 7.6%and 43.0%increases in the dicamba removal efficiency for EBFeNPs and ABFeNPs with rate constants of 0.025 min^(-1) and 0.023 min^(-1),respectively,confrming their catalytic roles.Additionally,the high efficiency of both catalysts was demonstrated through five consecutive cycles of linear pseudo-first-order Fenton oxidation reactions.

Effect of Soil Fertility and Planting Density on the Partitioning of the Above-Ground Biomass of Eucalyptus in a Plantation (Pointe-Noire, Republic of Congo)

Afforestation and reforestation are useful approaches to improve carbon sequestration. With the advent of forest plantations, growing environment conditions have become increasingly restrictive for light, soil nutrients, and interactions between trees to acquire available resources. Tree biomass data are essential for understanding the forest carbon cycle and plant adaptations to the environment. The distribution of tree biomass depends on the sum of multiple stand conditions. The data are from a dedicated experiment with two very contrasting areas of fertility, and two planting densities, including a high density at planting in order to achieve thinning. The plant material consists of the high-performance clones of Eucalyptus urophylla × E. grandis and the reference clone E. PF1. We hypothesize that the distribution of biomass changes as the intensity of competition changes and that this is accelerated by the fertility of the sites in time. The results indicate that fertilization, planting density and clones have an impact on biomass partitioning.

What Is the Impact of Ploughing on Eucalyptus Plantations in Bambou Mingali (Plateaux Batéké, Republic of Congo)?

Soil ploughing is an important stage in the preparation of planting, causing disturbance to the physical, chemical and biological properties of the soil. Soil ploughing can affect the availability of nutrients and water resources, and its effect can be short, medium or long-term. Soil ploughing accelerates surface heating and air circulation and encourages mineralisation by transforming organic matter into mineral salts, making nutrients soluble and accessible to plants. The aim of this study is to determine how soil ploughing affects the distribution of nutrients in the soil profile. The study focuses on nitrogen, carbon, phosphorus, calcium and magnesium, which are major elements of soil fertility on the Batéké plateaux in Congo. The results indicate that ploughing significantly modifies the distribution at depth des elements nutritifs: there is more accumulation at the surface than at depth (ei: nitrogen 1.34 t/ha ± 0.035 at 10 cm compared with 1.034 t/ha ± 0.098 at 50 cm) with a higher concentration of carbon (13.89 t/ha ± 0.87) followed by nitrogen (1.34 t/ha ± 0.035).

Date of First Thinning in a Very High-Density Eucalyptus Plantation in the Pointe-Noire Region (Republic of Congo)

Management of the Pointe-Noire Forest requires high-performance tools for simulating tree and stand growth and assessing the sustainability of plantations. Modelling the dynamics of even-aged and mono-species stands is a very active research topic. The approaches adopted by researchers vary according to the objectives and species considered: dendrometrical, Eco physiological or architectural. Thanks to the particular nature of these plantations and the trial set-up, it will be possible to explore the various aspects of production, clearly separating the part linked to genetics (three clones tested) from the part linked to the environment (via fertilisation) and the part associated with competition between trees (via planting densities and thinning regimes). This study will make a major contribution to the applicability of the self-thinning line and the RDI (Reineke Density Index) (Reineke, 1933) to fast-growing plantations. This research work will contribute to two points: 1) product diversification, which is a way of coping with international variations in timber markets, and 2) understanding how ecosystems function in exceptionally poor conditions, which will then enable the environmental impacts of the various recommended silvicultural itineraries to be assessed. The results obtained show that competition between trees in a stand of eucalyptus at very high density (10,000 stems/ha) and in two environments of very contrasting fertility is different depending on the clone. The decision on the date of the first thinning with a view to silviculture for timber and energy wood, which aims to ensure sustained and sustainable production of eucalyptus wood in these soils, should be taken between 12 and 14 months. The competition band is strong between 14 and 17 months, when the RDI = 0.8 is double that observed at 12 months.

Eucalyptus carbon stock estimation in subtropical regions with the modeling strategy of sample plots–airborne LiDAR–Landsat time series data

Updating eucalyptus carbon stock data in a timely manner is essential for better understanding and quantifying its effects on ecological and hydrological processes.At present,there are no suitable methods to accurately estimate the eucalyptus carbon stock in a large area.This research aimed to explore the transferability of the eucalyptus carbon stock estimation model at temporal and spatial scales and assess modeling performance through the strategy of combining sample plots,airborne LiDAR and Landsat time series data in subtropical regions of China.Specifically,eucalyptus carbon stock estimates in typical sites were obtained by applying the developed models with the combination of airborne LiDAR and field measurement data;the eucalyptus plantation ages were estimated using the random localization segmentation approach from Landsat time series data;and regional models were developed by linking LiDAR-derived eucalyptus carbon stock and vegetation age(e.g.,months or years).To examine the models’robustness,the developed models at the regional scale were transferred to estimate carbon stocks at the spatial and temporal scales,and the modeling results were evaluated using validation samples accordingly.The results showed that carbon stock can be successfully estimated using the age-based models(both age variables in months and years as predictor variables),but the month-based models produced better estimates with a root mean square error(RMSE)of 6.51 t⋅ha1 for Yunxiao County,Fujian Province,and 6.33 t⋅ha1 for Gaofeng Forest Farm,Guangxi Zhuang Autonomous Region.Particularly,the month-based models were superior for estimating the carbon stocks of young eucalyptus plantations of less than two years.The model transferability analyses showed that the month-based models had higher transferability than the year-based models at the temporal scale,indicating their possibility for analysis of carbon stock change.However,both the month-based and year-based models expressed relatively poor transferability at a spatial scale.This study provides new insights for cost-effective monitoring of carbon stock change in intensively managed plantation forests.

Co-Production of High-Grade Dissolving Pulp,Furfural,and Lignin from Eucalyptus via Extremely Low Acid Pretreatment and Pulping Technologies and Catalysis

Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.

Physiological plasticity in eucalyptus clones in the vegetative stage contributes to drought tolerance

With the expansion of eucalyptus crops to areas with severe water limitations,physiological studies involving eucalyptus clones to identify those that are tolerant to water stress become important.The objective of this study was to assess morphological and physiological responses by eucalyptus clones subjected to drought stress and rehydration.The experiment consisted of three eucalyptus clones:VC865,I224 and I144 and two water regimes:control and water stress followed by rehydration,with six replicates.Leaf water potential,gas exchange,maximum quantum efficiency of photo systemⅡand plant height and stem diameter were evaluated under drought stress and rehydration.After6 d of rehydration,the number of leaves,leaf area and dry mass of root,leaf,stem and their total were evaluated.All clones showed intense reduction of gas exchange during the drought stress period,and only VC865 and 1144 showed rapid recovery with 3 d of rehydration.Clone 1224 showed greater reduction in height,stem diameter,number of leaves,water potential at midday(Ψ_(w)_(Midday)),and maximum quantum efficiency of photosystemⅡ(F_(v)/F_(m)).Clones VC865and T144 showed lower reductions inΨ_(wMidday)and F_(v)/F_(m) under stress.VC865 had lower reductions in leaf number,leaf area and higher leaf dry mass,while clone I144 had higher height and lower reduction in root dry mass under.Both these clones showed higher water use efficiency with 3d of rehydration.These different phenotypic plasticities gave the clones VC865 and 1144 efficient mechanisms of acclimatization to stress and more drought tolerance,enhancing their greater capacity for recovery after stress,which allowed lower dry mass reduction.Clone 1224,however,was more susceptible to drought stress,undergoing greater physiological damage with only partial recovery during rehydration.

Effects of site productivity on individual tree maximum basal area growth rates of Eucalyptus pilularis in subtropical Australia

Inventory data were available from 96 plots of even-aged,monoculture,tall-open forests of Eucalyptus pilularis Smith,aged 2-63 years,growing in sub-tropical regions along the east coast of Australia.A model was developed relating the maximum possible stem basal area growth rate of individual trees to their stem basal area.For any tree size,this maximum increased as site productivity increased.However,the size at which this maximum occurred decreased as productivity increased.Much research has shown that,at any stand age,trees of a particular stem basal area are taller on more productive sites than on less productive ones.Taller trees incur greater respiratory costs to ensure maintenance of the photo synthetic capacity of their canopies;this reduces their growth rates.It was concluded that trees with larger basal areas will have the maximum possible growth rate on a less productive site,whilst trees with smaller basal areas will have the maximum possible on a more productive site.The model developed may constitute the first stage of a complete individual tree growth model system to predict wood yields from these forests.

Understory plant diversity and phenolic allelochemicals across a range of Eucalyptus grandis plantation ages

Allelopathy is an important mechanism in Eucalyptus plantations that causes detrimental impacts on understory diversity.Phenolic compounds are the main allelochemicals suppressing understory plants.However,the dynamic changes in phenolic allelochemicals and their relationship with understory diversity with increasing age of Eucalyptus plantations remain largely unclear.In this study,the understory plant diversity was assessed and phenolic compounds identified from leaf litter,roots,and rhizosphere soil samples in a Eucalyptus grandis plantation at two-year intervals for ten years using ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS).The abundance and diversity of under story plant species were lowest in 4-year-old plantations and increased significantly with age.Seven phenolic acids and 10 flavonoids were identified from leaf litter,roots,and rhizosphere soils.Most of the potential phenolic allelochemicals,such as salicylic acid,gallic acid,4-hydroxybenzoic acid,and epicatechin,were more abundant in younger plantations,especially at4 years old.The concentrations of phenolic compounds in the rhizosphere zone were significantly lower than in litter and root samples and did not change significantly with an increase in age.Notably,phenolic compounds contributed more to the variation in the understory plants than soil factors.Hydroxyphenyllactic acid,ellagic acid,quercetin,salicylic acid,and 4-hydroxybenzoic acid were the main phenolic compounds explaining the variation in plant diversity with plantation age.These findings indicate that young E.grandis plantations,especially at four years of age,merit a greater focus because of their lower understory plant diversity and higher allelopathic potential.

An Experimental Study of Composite Columns Filled with Eucalyptus nitens Timber under Axial Compression

Eucalyptus nitens(E.nitens)has been much used for producing paper but also shows promise for structural applications.In this study,static compressive tests were undertaken to examine its suitability to be used in an innovative composite column.The composite column was comprised of a rectangular steel tube with E.nitens timber infill.The nonlinear compressive behaviour of the composite column filled with E.nitens wood for both dry and wet conditions was examined.The same tests on rectangular steel tubes and bare dry and wet E.nitens samples were also undertaken as a comparison.For samples with different conditions,the ultimate capacity was evaluated and the effect of each condition on the compressive behaviour of the composite column was clarified.The steel tubes showed greater ductile behaviour,and more ductility was found in the wet samples.The steel tubes with E.nitens timber infill samples exhibited a greater linear elastic range connected with higher maximum loads,while the bare timber samples could support only lower maximum loads.The results from this research were promising for the use of rectangular steel tubes with E.nitens timber infill in structural applications.

Effect of Different Soil Regulation Measures on Yield and Soil Fertility of Eucalyptus Plantation in Southern Guangxi

In view of the problems of decreased unit yield,soil acidification,decreased soil organic matter and soil fertility caused by high generation single pure Eucalyptus plantation in southern Guangxi,a field experiment was conducted to study the yield,soil organic matter and soil fertility under six soil conditioning measures[interplanting Tephrosia candida under the forest,interplanting Sesbania cannabina under the forest,organic fertilizer application,residue to woodland,soil testing and formulated fertilization,and applying pure chemical fertilizer(CK)],and the enhancing effects of each treatment on the yield and soil improvement of Eucalyptus plantations were further comprehensively evaluated.The results showed that compared with the control,the five treatments could increase the average stock of Eucalyptus,among which the average stock under the treatment of interplanting T.candida under the forest was the highest,followed by soil testing and formulated fertilization.The soil organic matter content and soil fertility of the forest were significantly improved by interplanting green manure,organic fertilizer application and soil testing and formulated fertilization models,while the short-term(1 a)effect of the residue treatment on the improvement of soil organic matter and soil fertility was insignificant.During the actual production process,interplanting green manure and residue treatment were not effective due to the inoperability,and the applicability were not wide,which still needed further study.Therefore,organic manure application and soil testing and formulated fertilization were suitable choices to promote the improvement of productivity and soil quality of Eucalyptus plantation in Guangxi.

Extraction Conditions of Essential Oil from Eucalyptus Leaves by Distillation

[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.

Evaluation of Antiplasmodial Effect of Methanol Leaf Extract and Fractions of Eucalyptus camadulensis (Denhn) in Albino Wistar Mice

Nigeria is one of the malaria-endemic countries, where the treatment of malaria has relied heavily on natural and traditional medicines. This study was designed to investigate and ascertain the preference of Eucalyptus camaldulensis in treating malaria using three standard models among local herbalists. Extraction was carried out on the leaves of Eucalyptus camadulensis using methanol. The methanol crude extract and other solvent fractions obtained were used for analysis. An acute toxicity test (LD50) was carried out using Lorke’s Method. The extract and its fractions were screened for phytochemical constituents using standard procedures. Different doses of the methanol crude extract (250 mg/kg, 500 mg/kg, and 1000 mg/kg) and other solvent fractions (250 mg/kg, 500 mg/kg) were assessed for their antiplasmodial property using the Suppressive, Curative, and Prophylactic models on different days. One hundred and eighty grams (18% w/w) of the extract were recovered from 1000 g of powdered leaves. The weight of fractions and their yields calculated from 50 g crude extract are n-hexane fraction (3.45 g, 6.9%), ethylacetate fraction (11.65 g, 23.3%), and butanol (7.84 g, 15.68%). The result of the acute toxicity test showed that the lethal dose of the plant was above 5000 mg/kg. For the crude extract, the 1000 mg/kg dose had the highest percentage of parasitemia suppression of 97.3%, 95.30%, and 75.97% in the curative, suppressive, and prophylactic models, respectively. The fractions exhibited a significant chemosuppressive effect when compared with the negative control, with the butanol fraction (500 mg/kg) showing a higher percentage suppression. The findings in this study justify the use of this plant in traditional medicine for the management of malaria fever and tally with its folkloric use. However, more research is needed to establish the functions of the constituents in relation to antiplasmodial activity.

巨桉(Eucalyptus grandis)人工林土壤动物群落对采伐干扰的初期响应

为了解采伐干扰对巨桉（Eucalyptus grandis）人工林土壤动物的影响,于2005～2007年采用手捡法和干湿漏斗法对四川省洪雅县巨桉人工林采伐干扰前和采伐干扰后土壤动物群落进行调查,采伐干扰前四季共获土壤动物4775头,分属4门11纲27目,采伐干扰后获土壤动物4640头,分属4门10纲23目。采伐干扰后秋季（10月）、冬季（1月）和春季（4月）土壤动物个体数较采伐干扰前分别上升224头、368头和443头,而夏季（7月）下降了1170头。采伐干扰前巨桉人工林土壤动物个体数与类群数季节变化趋势基本一致,而采伐干扰后土壤动物类群数变化受土壤动物个体数变化的影响较小。与采伐干扰前相比,采伐干扰后枯落物层各季节土壤动物密度均低于采伐前,0～5 cm土层土壤动物密度与干扰前呈相反的变化趋势,其波动较5～10 cm和10～15 cm土层大。采伐干扰后土壤动物类群数四季共减少4个,采伐干扰前后土壤动物优势类群类群数波动小,采伐后常见类群类群数上升（除冬季外）,稀有类群对采伐干扰较敏感,其类群数下降幅度较大。采伐干扰前后同功能种团均以杂食性和腐食性土壤动物为主,两者百分比之和均在89%以上。密度-类群指数（DG）和多样性指数（H′）的变化趋势相似,采伐干扰前后的变化趋势相反,表明采伐干扰对巨桉人工林土壤动物季节变化有较大影响。

Single leaf area estimation models based on leaf weight of eucalyptus in southern China

Leaf area is an important parameter for modeling tree growth and physiological processes of trees. The single young and mature leaf area estimation models of eucalyptus were developed based on leaf fresh weight. In total, leaf area and leaf weight were measured from 455 fresh leaves of 25 trees of eucalyptus in southern China. The majority of the data （80%） were used for model calibration, and the remaining data （20%） were used for model validation. The linear, compound and power models were tested. Based on goodness of fit, prediction ability and residual performance, we found that linear and power models could best describe the relationship between leaf area and weight for young leaf and mature leaf, respectively. The study provides a simple and reliable method for estimating single-leaf area, which has a good potential in the functional- structural model of eucalyptus.

Radial Variation in Sap Flux Density as a Function of Sapwood Thickness in Two Eucalyptus ( Eucalyptus urophylla ) Plantations

Radial variation in sap flux density (SFD) as a function of sapwood thickness is of importance in accurately estimating sap flux through sapwood area which, in turn, decides the precision of heat pulse application. However, until now, only a few studies have evaluated the magnitude and significance of sampling errors associated with radial gradients in SFD, which were based on the small monitoring measurement data from a few trees. Based on one year of heat pulse observation of two 3 - 4 years old Eucalyptus urophylla S. T.,P Blake plantations in Leizhou Peninsula, Guangdong Province, China, a way of data processing was developed to treat with the lots of SFD data measured from 39 trees. It was found that the radial variation in SFD as a function of sapwood thickness in the two eucalyptus plantation sites could be expressed as y = 3. 667 5x(3) - 7.295 5x(2) + 3.682 6x + 0. 567 4 (R-2 = 0. 939 1, n = 80, P = 0.01), where y is the ratio of SFD of a sensor to the average of four data in different depths, x is the ratio of a sensor depth to tire radial sapwood thickness. It was the same (as in the following equation) in Jijia site, y = 5.006 2x(3) - 9.116 1x(2) + 4. 454 4x + 0.463 4 (R-2 = 0. 806 9, n = 72, P = 0.01) in Hetou site. From cambium to heartwood, SFD showed some increases at first and then decreases continuously. However, because die trees were very young, the maximum SFD was only 0. 33 - 0. 36 times more than the minimum.

Use of the pilodyn for assessing wood properties in standing trees of Eucalyptus clones

The effectiveness of pilodyn was tested in evaluating wood basic density, outer wood density, heartwood density, and modulus of elasticity （MoE） at 22 four-year-old eucalyptus clones in Guangxi, China. Results indicated that the mean value ranged from 9.44 to 15.41 mm for Pilodyn penetration, 0.3514 to 0.4913 g.cm^-3 for wood basic density, and 3.94 to 7.53 Giga Pascal （GPa） for MoE, respectively. There were significant differences （1% level） in pilodyn penetration between different treatments, different directions and among the clones. Generally strongly negative correlations were found between pilodyn penetration and wood properties, and the coefficients ranged from -0,433 to -0,755. Our results, together with other studies, suggest that the use of pilodyn for assessing wood density and MoE was confirmed as a possibility.

A Study of the Distribution and Accumulation of Major Nutrient Elements in Different Densities of Eucalyptus grandis

This study was conducted to investigate the distribution and accumulation of major elements of 5-year-old Eucalyptus grandis forests with the densities of 556 trees/hm2 and 1 667 trees/hm2. The results showed that： （1） The distribution of ma- jor nutrient element contents in various organs of the E. grandis with the 2 densi- ties was nearly the same, and the ranked order was leaf〉tree trunk〉branch or branchlet〉fruit〉bark. （2） From the distribution of nutrient elements and organic mat- ter in the trunk, P, K, Mg and Ca contents presented basically a trend of increasing with the trunk height increasing. And the organic matter content increased with the trunk height increasing in the low density stand, while the result was opposite in the high density stand. Furthermore, N content increased with the trunk height increas- ing in the low density stand, but the content in the high density stand exhibited a trend of decreasing at first, increasing then and increasing at the last. （3） From the distribution of biomass, the ranked order was tree trunk〉bark or branch〉branchlet〉 leaf〉fruit. And （4） The accumulated amounts of major nutrient elements in various organs under the 2 stand densities was nearly same. Ca content was the highest in the 2 kinds of plantations, followed by N, K, Mg and P contents. Ca content was 601.78 kg/hm2 in the low density stand and 1 204. 43 kg/hm2 in the high density stand.

基于Eucalyptus构建私有云计算平台

随着云计算的发展与深入,公有云在网站数据处理、在线服务等领域作用显著。与公有云相对,私有云计算凭借其安全性保障、高效个性化的弹性计算资源分配能力、简易的硬件要求等特性,逐渐在科研实验室、工作站、企业内部等小型分布式计算环境中得到广泛应用。本文基于Eucalyptus开源云计算平台,构建了一个适用于科研实验室及企业内部使用的私有云计算平台,既能弹性分配计算资源,满足开发、测试、管理等不同需求,又能为集群技术、分布式计算、云计算应用等研发工作提供实用平台。本文通过虚拟实例的仿真实验,验证了私有云计算平台在计算资源同构化时的优良性能。

Eucalyptus开源框架下云平台的构建与性能分析

基于Eucalyptus开源框架的云计算平台能够为用户提供硬件资源按需分配的服务。对云平台系统架构、网络及资源管理的解决方案进行了论述,并构筑了相应的云服务环境。通过对云环境下虚拟机实例与普通PC机在CPU、Memory、Disk I/O等性能的比较,验证了所构建云计算平台的可用性和可扩展性。