A benchmark experiment on^(238)U slab samples was conducted using a deuterium-tritium neutron source at the China Institute of Atomic Energy.The leakage neutron spectra within energy levels of 0.8-16 MeV at 60°an...A benchmark experiment on^(238)U slab samples was conducted using a deuterium-tritium neutron source at the China Institute of Atomic Energy.The leakage neutron spectra within energy levels of 0.8-16 MeV at 60°and 120°were measured using the time-of-flight method.The samples were prepared as rectangular slabs with a 30 cm square base and thicknesses of 3,6,and 9 cm.The leakage neutron spectra were also calculated using the MCNP-4C program based on the latest evaluated files of^(238)U evaluated neutron data from CENDL-3.2,ENDF/B-Ⅷ.0,JENDL-5.0,and JEFF-3.3.Based on the comparison,the deficiencies and improvements in^(238)U evaluated nuclear data were analyzed.The results showed the following.(1)The calculated results for CENDL-3.2 significantly overestimated the measurements in the energy interval of elastic scattering at 60°and 120°.(2)The calculated results of CENDL-3.2 overestimated the measurements in the energy interval of inelastic scattering at 120°.(3)The calculated results for CENDL-3.2 significantly overestimated the measurements in the 3-8.5 MeV energy interval at 60°and 120°.(4)The calculated results with JENDL-5.0 were generally consistent with the measurement results.展开更多
Integral experiments on tungsten slab samples were carried out on the D-T neutron source facility at China Institute of Atomic Energy. Leakage neutron spectra from the irradiated tungsten target were measured by the t...Integral experiments on tungsten slab samples were carried out on the D-T neutron source facility at China Institute of Atomic Energy. Leakage neutron spectra from the irradiated tungsten target were measured by the time-of-flight technique. Accuracy of the nuclear data for tungsten was examined by comparing the measured neutron spectra with the leakage neutron spectra simulated using the MCNP-4C code with evaluated nuclear data of the JEFF-3.2, FENDL-3.0 and TENDL-2014 libraries. The results show that the calculations with JEFF-3.2 agree well with the measurements in the whole energy range and all angles, whereas the spectra calculated with FENDL-3.0 and TENDL-2014 have some discrepancies with the experimental data.展开更多
To satisfy the requirements of nuclear reaction cross sections in nuclear engineering applications and nuclear physics studies,the Neutron Activation Cross Section Data Library has been established.818 target nuclei i...To satisfy the requirements of nuclear reaction cross sections in nuclear engineering applications and nuclear physics studies,the Neutron Activation Cross Section Data Library has been established.818 target nuclei including unstable target or isomeric target nuclei are considered in this library.The induced neutron energy range region is between 10^(-5)eV and 20 MeV.The standard ENDF-6 format is adopted,including general information,reaction cross sections,multiplicities,and so on.The recommended reaction cross sections were obtained using UNF code system and FDRR nuclear model codes or systematic analysis based on available experimental data.展开更多
基金This work was supported by the general program(No.1177531)joint funding(No.U2067205)from the National Natural Science Foundation of China.
文摘A benchmark experiment on^(238)U slab samples was conducted using a deuterium-tritium neutron source at the China Institute of Atomic Energy.The leakage neutron spectra within energy levels of 0.8-16 MeV at 60°and 120°were measured using the time-of-flight method.The samples were prepared as rectangular slabs with a 30 cm square base and thicknesses of 3,6,and 9 cm.The leakage neutron spectra were also calculated using the MCNP-4C program based on the latest evaluated files of^(238)U evaluated neutron data from CENDL-3.2,ENDF/B-Ⅷ.0,JENDL-5.0,and JEFF-3.3.Based on the comparison,the deficiencies and improvements in^(238)U evaluated nuclear data were analyzed.The results showed the following.(1)The calculated results for CENDL-3.2 significantly overestimated the measurements in the energy interval of elastic scattering at 60°and 120°.(2)The calculated results of CENDL-3.2 overestimated the measurements in the energy interval of inelastic scattering at 120°.(3)The calculated results for CENDL-3.2 significantly overestimated the measurements in the 3-8.5 MeV energy interval at 60°and 120°.(4)The calculated results with JENDL-5.0 were generally consistent with the measurement results.
基金supported by the National Natural Science Foundation of China(No.11605097,91426301,and 11605257)Doctoral Scientific Research Foundation of Inner Mongolia University for the Nationalities(No.BS365)the‘‘ADS project 302’’of the Chinese Academy of Sciences(No.XDA03030200)
文摘Integral experiments on tungsten slab samples were carried out on the D-T neutron source facility at China Institute of Atomic Energy. Leakage neutron spectra from the irradiated tungsten target were measured by the time-of-flight technique. Accuracy of the nuclear data for tungsten was examined by comparing the measured neutron spectra with the leakage neutron spectra simulated using the MCNP-4C code with evaluated nuclear data of the JEFF-3.2, FENDL-3.0 and TENDL-2014 libraries. The results show that the calculations with JEFF-3.2 agree well with the measurements in the whole energy range and all angles, whereas the spectra calculated with FENDL-3.0 and TENDL-2014 have some discrepancies with the experimental data.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11934004 and U1832201)the Science Challenge Project (Grant No. TZ2016005)the CAEP Foundation (Grant No. CX2019022)
文摘To satisfy the requirements of nuclear reaction cross sections in nuclear engineering applications and nuclear physics studies,the Neutron Activation Cross Section Data Library has been established.818 target nuclei including unstable target or isomeric target nuclei are considered in this library.The induced neutron energy range region is between 10^(-5)eV and 20 MeV.The standard ENDF-6 format is adopted,including general information,reaction cross sections,multiplicities,and so on.The recommended reaction cross sections were obtained using UNF code system and FDRR nuclear model codes or systematic analysis based on available experimental data.
