Numerical simulation of drop weight impact sensitivity evaluation criteria for pressed PBXs

A thorough understanding of drop-weight impacted responses for polymer-bonded explosives(PBXs)is significant to evaluate their impact sensitivity.The characteristics of the drop-weight impacted pressed PBXs including deforming,fracturing,forming a local high-temperature region and igniting,were simulated using a coupled mechanical-thermo-chemical model integrating micro-defects evolution.A novel evaluation method for impact sensitivity is established using the relation between the input kinetic energy and the output energy due to deformation,crushing energy,local hot spot energy and ignition.The effects of impact velocity on sensitivity were analyzed and the critical local ignition impact velocity is determined as 4.0-4.5 m/s.The simulated results show that shear-crack friction heating is the dominant ignition mechanism.The region along the boundary of PBXs sample is the most hazardous regions where ignition first occur.The propagation of stress wave in PBXs causes shear-crack hotspot and bulk temperature exhibiting an approximate 45°direction evolution path,which is the main reason that dominated damage-ignition region transits from the boundary to the central of sample.

Maximum Entropy Distribution Function and Uncertainty Evaluation Criteria

Marine environmental design parameter extrapolation has important applications in marine engineering and coastal disaster prevention.The distribution models used for environmental design parameter usually pass the hypothesis tests in statistical analysis,but the calculation results of different distribution models often vary largely.In this paper,based on the information entropy,the overall uncertainty test criteria were studied for commonly used distributions including Gumbel,Weibull,and Pearson-III distribution.An improved method for parameter estimation of the maximum entropy distribution model is proposed on the basis of moment estimation.The study in this paper shows that the number of sample data and the degree of dispersion are proportional to the information entropy,and the overall uncertainty of the maximum entropy distribution model is minimal compared with other models.

Geological characteristics,evaluation criteria and discovery significance of Paleogene Yingxiongling shale oil in Qaidam Basin,NW China

Major breakthroughs of shale oil exploration have been made recently in the upper member of Paleogene Lower Ganchaigou Formation of Yingxiongling area, Qaidam Basin. However, the low total organic carbon content of saline-lacustrine source rock, and unclear genetic mechanism, evaluation criteria and resources potential of the shale oil have restricted the exploration and evaluation of Yingxiongling shale oil. Through analysis of large amounts of cores, well drilling, seismic, laboratory test data and integrated study, focusing on the shale and mixed types of shale oil reservoirs characterized by high-frequency interbedded organic-rich laminated shale and limy dolomite, it is concluded that the shale oil in the upper member of Lower Ganchaigou Formation in the Yingxiongling area have six geological characteristics:(1) two-stage hydrocarbon generation of hydrogen-rich source rock and large amount of retained oil;(2) multiple types of reservoir space and good reservoir properties;(3)source-reservoir integration, thick “sweet spot” and high oil-bearing grade;(4) high pressure coefficient between and under salt layers, and sufficient formation energy;(5) high content of light components, high gas-oil ratio, and good quality of the crude oil;(6) high content of brittle minerals and good fracability. The evaluation criterion of shale oil is preliminarily established based on the eight parameters: total organic carbon content, maturity, effective porosity, oil saturation, brittle mineral content,pressure coefficient, lamellation density, and burial depth. Combined with parameters of E32 source rock thickness, area, vertical distribution of oil layers, and free hydrocarbon content, the shale oil resources have been preliminarily estimated as 21×10^(8) t.The structurally stable area is the predominant objective of shale oil exploration and the favorable exploration area for Yingxiongling shale oil is nearly 800 km^(2).

Sweet spot evaluation and exploration practice of lacustrine shale oil of the second member of Kongdian Formation in Cangdong sag, Bohai Bay Basin

Based on core,thin section,X-ray diffraction,rock pyrolysis,CT scanning,nuclear magnetic resonance and oil testing data,the macro and micro components,sedimentary structure characteristics,of Paleogene Kong 2 Member in Cangdong sag of Huanghua depression and evaluation standard and method of shale oil reservoir were studied to sort out the best shale sections for shale oil horizontal wells.According to the dominant rock type,rhythmic structure and logging curve characteristics,four types of shale lithofacies were identified,namely,thin-layered dolomitic shale,lamellar mixed shale,lamellar felsic shale,and bedded dolomitic shale,and the Kong 21 sub-member was divided into four quasi-sequences,PS1 to PS4.The PS1 shale has a porosity higher than 6%,clay content of less than 20%,and S1 of less than 4 mg/g;the PS2 shale has well-developed laminar structure,larger pore and throat size,better connectivity of pores and throats,high contents of TOC and movable hydrocarbon,S1 of over 4 mg/g,clay content of less than 20%,and porosity of more than 4%;PS3 shale has S1 value higher than 6 mg/g and clay content of 20%-30%,and porosity of less than 4%;and PS4 shale has lower TOC content and low oil content.Shale oil reservoir classification criterion based on five parameters,free hydrocarbon content S1,shale rhythmic structure,clay content,TOC and porosity,was established.The evaluation method of shale oil sweet spot by using the weighted five parameters,and the evaluation index EI were proposed.Through comprehensive analysis,it is concluded that PS2 is best in quality and thus the dual geological and engineering sweet spot of shale oil,PS3 and PS1 come next,the former is more geologic sweet spot,the latter more engineering sweet spot,and PS4 is the poorest.Several vertical and horizontal wells drilled in the PS2 and PS3 sweet spots obtained high oil production.Among them,Well 1701 H has produced stably for 623 days,with cumulative production of over 10000 tons,showing bright exploration prospects of Kong 2 Member shale oil.

Reciprocity evaluation based adaptive CCM reconstruction in FDD multi-antenna systems

In view of the difficulty of obtaining downlink channel state information,partial reciprocity based channel covariance matrix(CCM)reconstruction has attracted a lot of attention in frequency division duplex(FDD)multi-antenna systems.Taking both the impact of CCM reconstruction on system performance and design complexity,we investigate an adaptive CCM reconstruction in this paper.Specifically,to effectively evaluate the validity of the reciprocity,we firstly analyze the characteristics of the partial reciprocity and define a reciprocity evaluation criterion.Then,we propose a partial antenna based angular power spectrum(APS)estimating algorithm to further reduce the complexity of the CCM reconstruction.Finally,simulation results demonstrate the superiority of our proposed schemes.

A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites

This study aims to experiment with the mechanical properties of polypropylene(PP)/thermoplastic elastomer/nano-silica/compatibilizer nanocomposite using the melt mixing method.The addition of polyolefin elastomers has proved to be an approachable solution for low impact strength of PP,while it would also reduce the Young's modulus and tensile strength.That is why reinforcement would be applied to this combination to enhance the elastic modulus.The mechanical properties of the prepared composites were devised to train an artificial neural network to predict these properties of the system in 6256 unknown points.Therefore,the sensitivity analysis was performed and the share of each input parameter on the respective output values was calculated.Additionally,a novel parameter called nanocomposite evaluation criterion(NEC)is introduced to analyze the suitability of the nanocomposites considering the mechanical properties.Accordingly,the formulation with optimal mechanical properties of toughness,elongation at break,tensile strength,Young's modulus,and impact strength was obtained.

Investigation on the Changing Characteristics of Flow-Induced Noise in a Centrifugal Pump

Centrifugal pumps are widely used in engineering for a variety of applications.A known drawback of these devices is the high-level noise generated during operations,which can affect their stability and adversely influence the entire working environment.By combining the Powell vortex sound theory,numerical simulations and experimental measurements,this research explores the trends of variation and the corresponding underlying mechanisms for the flow-induced noise at various locations and under different operating conditions.It is shown that the total sound source intensity(TSSI)and total sound pressure level(TSPL)in the impeller,in the region between the inlet to the outlet and along the circumferential extension of the volute,are much higher than those at pump inlet and outlet.Additionally,under various rotational speeds with the design flow rate(Condition 1),the TSSI and TSPL at pump inlet and outlet are higher than those obtained with the opening of the valve kept unchanged(Condition 2);vice versa when these two parameters are evaluated at various locations in the impeller and the volute under the Condition 2,they exceed the equivalent values obtained for the other Condition 1.

Evaluation of criterion validity of CHF-quality of life scale of integrative medicine

Objective To evaluate the criterion validity of Chronic Heart Failure(CHF)-Quality of Life(QOL)Scale of Integrative Medicine(abbreviated as Scale).Methods Clinical data of 249 CHF in-patients were collected.

Underwater acoustic communication and the general performance evaluation criteria

Driven by the huge demand to explore oceans, underwater wireless communications have been rapidly developed in the past few decades. Due to the complex physical characteristics of water, acoustic wave is the only media available for underwater wireless communication at any distance. As a result, underwater acoustic communication(UAC) is the major research field in underwater wireless communication. In this paper, characteristics of underwater acoustic channels are first introduced and compared with terrestrial communication to demonstrate the difficulties in UAC research. To give a general impression of the UAC, current important research areas are mentioned. Furthermore, different principal modulation-based schemes for short-and medium-range communications with high data rates are investigated and summarized. To evaluate the performance of UAC systems in general,three criteria are presented based on the research publications and our years of experience in high-rate short-to medium-range communications. These three criteria provide useful tools to generally guide the design and evaluate the performance of underwater acoustic communication systems.

Risk analysis methods of the water resources system under uncertainty

The main characteristic of the water resources system(WRS)is its great complexity and uncertainty,which makes it highly desirable to carry out a risk analysis of the WRS.The natural environmental,social economic conditions as well as limitations of human cognitive ability are possible sources of the uncertainties that need to be taken into account in the risk analysis process.In this paper the inherent stochastic uncertainty and cognitive subjective uncertainty of the WRS are discussed first,from both objective and subjective perspectives.Then the quantitative characterization methods of risk analysis are introduced,including three criteria(reliability,resiliency and vulnerability)and five basic optimization models(the expected risk value model,conditional value at risk model,chance-constrained risk model,minimizing probability of risk events model,and the multi-objective optimization model).Finally,this paper focuses on the various methods of risk analysis under uncertainty,which are summarized as random,fuzzy and mixed methods.A more comprehensive risk analysis methodology for the WRS is proposed based on the comparison of the advantages,disadvantages and applicable conditions of these three methods.This paper provides a decision support of risk analysis for researchers,policy makers and stakeholders of the WRS.

Axially Oriented Structured Porous Layers for Heat Transfer Enhancement in a Solar Receiver Tube

The present work reports a numerical investigation of heat transfer and pressure drop characteristics in a solar receiver tube with different shaped porous media for laminar and low Reynolds number turbulent flow regimes.Numerical simulations have been performed with finite volume-based code ANSYS(v-2017)for different shapes of porous layers axially oriented in the tube.The plain-shaped porous medium fitted up to 50%of the tube shows better performance than other-shaped porous layers.Simulations have also been performed for axially oriented structured porous media with different sizes.Axially oriented structured porous medium develops a lateral flow disturbance enhancing the intermixing of the liquid and porous medium at their interface.Structured porous medium with a 3-crest configuration shows the best heat transfer performance among all the shapes of porous media.It offers a maximum of 148%heat transfer enhancement compared to a half-filled plain porous layer,whereas it reports a maximum of 564%enhancement compared to the flow without a porous layer.The lateral flow tendency or the swirling effect helps better heat transfer performance in the axially oriented structured porous media.Performance evaluation criterion(PEC)in all types of porous media is more in the transitional flow regime than in the laminar and turbulent flow regimes.For the same operating conditions,the maximum value of the PEC in the present work is 120%higher than the maximum value of PEC for other-shaped porous media reported in the literature.Correlations for Nusselt number have been developed for both laminar and turbulent flow regimes for three crests shaped porous medium.

A Survey on Performance Optimization of High-Level Synthesis Tools

Field-programmable gate arrays(FPGAs)have recently evolved as a valuable component of the heterogeneous computing.The register transfer level(RTL)design flows demand the designers to be experienced in hardware,resulting in a possible failure of time-to-market.High-level synthesis(HLS)permits designers to work at a higher level of abstraction through synthesizing high-level language programs to RTL descriptions.This provides a promising approach to solve these problems.However,the performance of HLS tools still has limitations.For example,designers remain exposed to various aspects of hardware design,development cycles are still time consuming,and the quality of results(QoR)of HLS tools is far behind that of RTL flows.In this paper,we survey the literature published since 2014 focusing on the performance optimization of HLS tools.Compared with previous work,we extend the scope of the performance of HLS tools,and present a set of three-level evaluation criteria,covering from ease of use of the HLS tools to promotion on specific metrics of QoR.We also propose performance evaluation equations for describing the relation between the performance optimization and the QoR.We find that it needs more efforts on the ease of use for efficient HLS tools.We suggest that it is better to draw an analogy between the HLS development process and the embedded system design process,and to provide more elastic HLS methodology which integrates FPGAs virtual machines.