Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof

Considering the danger of water inrush in mining very thick coal seam under water-rich roof in Majialiang Coal Mine,the universal discrete element(UDEC)software was used to simulate the overburden fracture evolution laws when mining 4#coal seam.Besides,this study researched on the influence of face advancing length,speed and mining height on the height of the water flowing fractured zones(HWFFZ),and analyzed the correlation of face advancing length and change rules of aquifer water levels and goaf water inflow.Based on those mentioned above,this research proposed the following water-controlling technologies:draining the roof water before mining,draining goaf water,reasonable advancing speed and mining thickness.These water-controlling technologies were successfully used in the feld,thus ensured safely mining the very thick coal seam under water-rich roof.

A Study on Dual-Load-Zone Model of Overlying Strata andEvolution Law of Mining Stress

The changeable structure and movement law of overlying strata are the maincontributor to the change of mining stress.Starting from the relevant theory of keystratum and particularly based on the theory of mine ground pressure and strata control,this research proposed a new solution to mining stress problems by establishing adual-load-zone stratum structural model.Elastic foundation beam theory was used tosolve the stress of overlying strata of the dual-load-zones with superposition method,which revised the traditional calculation method of mining stress.The abnormal increaseof lead abutment pressure in the mining area was explained effectively,through which theevolution law of mining stress in the case of hard rock was obtained.The results indicatethat mining stress experiences a drastic change within the range of 50 m ahead of the coalwall due to the collapse of main roof;under the influence of main key stratum andinferior key strata,the influence range of lead abutment pressure is extended up toapproximately 120 m in the working face;this remarkable increase can be attributed tothe excessive length of sagging zone.Results from both the dual-load-zone modelexperiment and field measurement demonstrate high consistency.The model can predictthe influence range of abutment pressure effectively and thus guide the safety productionof mining.

Route strategy of satellite network in GNSS based on topology evolution law

As each type of satellite network has different link features, its data transmission must be designed based on its link features to improve the efficiency of data transferring. The transmission of navigation integrated services information （NISI） in a global navigation satellite system （GNSS） with inter-satellite links （ISLs） is studied by taking the real situation of inter-satellite communication links into account. An on-demand computing and buffering centralized route strategy is proposed based on dynamic grouping and the topology evolution law of the GNSS network within which the satellite nodes are operated in the manner of dynamic grouping. Dynamic grouping is based on satellites spatial relationships and the group role of the satellite node changes by turns due to its spatial relationships. The route strategy provides significant advantages of high efficiency, low complexity, and flexi- ble configuration, by which the established GNSS can possess the features and capabilities of feasible deployment, efficient transmission, convenient management, structural invulnerability and flexible expansion.

Time evolution law of a two-mode squeezed light field passing through twin diffusion channels

We explore the time evolution law of a two-mode squeezed light field(pure state)passing through twin diffusion channels,and we find that the final state is a squeezed chaotic light field(mixed state)with entanglement,which shows that even though the two channels are independent of each other,since the two modes of the initial state are entangled with each other,the final state remains entangled.Nevertheless,although the squeezing(entanglement)between the two modes is weakened after the diffusion,it is not completely removed.We also highlight the law of photon number evolution.In the calculation process used in this paper,we make full use of the summation method within the ordered product of operators and the generating function formula for two-variable Hermite polynomials.

New approach for obtaining the time-evolution law of a chaotic light field in a damping gaining-process

A new approach for studying the time-evolution law of a chaotic light field in a damping-gaining coexisting process is presented. The new differential equation for determining the parameter of the density operator p（t） is derived and the solution of f for the damping and gaining processes are studied separately. Our approach is direct and the result is concise since it is not necessary for us to know the Kraus operators in advance.

Simulation Test for Evolution Laws of Tensile Fractures in a Coal Mining Area

In order to study evolution laws of tensile fractures in a coal mining area, based on the classification of the fractures formed by mining, a physical simulation test was carried out to simulate the dynamic evolution process of tensile fractures in coal mining areas. The results showed that after the coal in the mining area was mined, the mining area underwent obvious movement and deformation and forms tensile fractures. As the min-ing working face was advanced, the tensile fractures underwent the dynamic process of generation, development and closure. The changing curves of density of tensile fractures with the increase of mining length of the working face liked a ladder （it increased slowly and then rapidly） and then had two peaks （the second peak was higher than the first peak）.

Geometric Evolution Laws for Thin Crystalline Films: Modeling and Numerics

Geometrical evolution laws are widely used in continuum modeling of surface and interface motion in materials science.In this article,we first give a brief review of various kinds of geometrical evolution laws and their variational derivations,with an emphasis on strong anisotropy.We then survey some of the finite element based numerical methods for simulating the motion of interfaces focusing on the field of thin film growth.We discuss the finite element method applied to front-tracking,phase-field and level-set methods.We describe various applications of these geometrical evolution laws to materials science problems,and in particular,the growth and morphologies of thin crystalline films.

A Robust and Efficient Adaptive Multigrid Solver for the Optimal Control of Phase Field Formulations of Geometric Evolution Laws

We propose and investigate a novel solution strategy to efficiently and accurately compute approximate solutions to semilinear optimal control problems,focusing on the optimal control of phase field formulations of geometric evolution laws.The optimal control of geometric evolution laws arises in a number of applications in fields including material science,image processing,tumour growth and cell motility.Despite this,many open problems remain in the analysis and approximation of such problems.In the current work we focus on a phase field formulation of the optimal control problem,hence exploiting the well developed mathematical theory for the optimal control of semilinear parabolic partial differential equations.Approximation of the resulting optimal control problemis computationally challenging,requiring massive amounts of computational time and memory storage.The main focus of this work is to propose,derive,implement and test an efficient solution method for such problems.The solver for the discretised partial differential equations is based upon a geometric multigrid method incorporating advanced techniques to deal with the nonlinearities in the problem and utilising adaptive mesh refinement.An in-house twogrid solution strategy for the forward and adjoint problems,that significantly reduces memory requirements and CPU time,is proposed and investigated computationally.Furthermore,parallelisation as well as an adaptive-step gradient update for the control are employed to further improve efficiency.Along with a detailed description of our proposed solution method together with its implementation we present a number of computational results that demonstrate and evaluate our algorithms with respect to accuracy and efficiency.A highlight of the present work is simulation results on the optimal control of phase field formulations of geometric evolution laws in 3-D which would be computationally infeasible without the solution strategies proposed in the present work.

Generation and Evolution of Cavitation Bubbles in Volume Alternate Cavitation(VAC)

Cavitation generation methods have been used in multifarious directions because of their diversity,and numerous studies and discussions have been conducted on cavitation generation methods.This study aims to explore the generating mechanism and evolution law of volume alternate cavitation(VAC).In the VAC,liquid water is placed in an airtight container with a variable volume.As the volume alternately changes,the liquid water inside the container continues to cavitate.Then,the mixture turbulence model and in-cylinder dynamic grid model are adopted to conduct computational fluid dynamics simulation of volume alternate cavitation.In the simulation,the cloud images at seven heights on the central axis are monitored,and the phenomenon and mechanism of height and eccentricity are analyzed in detail.By employing the cavitation flow visualization method,the generating mechanism and evolution law of cavitation are revealed.The synergistic effects of experiments and high-speed camera capturing confirm the correctness of the simulation results.In the experiment,the volume change stroke of the airtight container is set to 20 mm,the volume change frequency is 18 Hz,and the shooting frequency of the high-speed camera is set to 10000 FPS.The experimental results indicate that the position of the cavitation phenomenon has a reasonable law during the whole evolution cycle of the cavitation cloud.Also,the volume alternation cycle corresponds to the generation,development,and collapse stages of cavitation bubbles.

Geographical Names as Cultural Symbols:The Law of Naming System’s Evolution in Southwest China

In this paper,the geographic name in Southwest China is regarded as a symbolic representation of human beings,and the dynamic social and historical process behind the place names is restored from the perspective of the symbolic anthropology.There are three paths in the construction and evolution of geographic names in Southwest China—Ethnic information,sacred systems,and local representation,which have been rewritten,masked,and reconstructed over the years.As a result,the system of geographical names is gradually formed and integrated into local memory through space building,culture filling,and so on,affecting and influencing local group identity and cognitive concept.

Regulating Effect of Substrate Temperature on Sputteringgrown Ge/Si QDs under Low Ge Deposition

The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectroscopy,and photoluminescence(PL)tests.The experimental results indicate that temperatures higher than 750℃effectively increase the crystallization rate and surface smoothness of the Si buffer layer,and temperatures higher than 600℃significantly enhance the migration ability of Ge atoms,thus increasing the probability of Ge atoms meeting and nucleating to form QDs on Si buffer layer,but an excessively high temperature will cause the QDs to undergo an Ostwald ripening process and thus develop into super large islands.In addition,some PL peaks were observed in samples containing small-sized,high-density Ge QDs,the photoelectric properties reflected by these peaks were in good agreement with the corresponding structural characteristics of the grown QDs.Our results demonstrate the viability of preparing high-quality QDs by magnetron sputtering at high deposition rate,and the temperature effect is expected to work in conjunction with other controllable factors to further regulate QD growth,which paves an effective way for the industrial production of QDs that can be used in future devices.

Surrounding Rock Failure Mechanism and Control Technology of Gob-Side Entry with Triangle Coal Pillar at Island Longwall Panel in 15 m Extra-Thick Coal Seams

Taking the return air roadway of Tashan 8204 isolated island working face as the background, the evolution law of the stress field in the surrounding rock of the widened coal pillar area roadway during the mining period of the isolated island working face is obtained through numerical simulation. The hazardous area of strong mine pressure under different coal pillar widths is determined. Through simulation, it is known that when the width of the coal pillar is less than 20 m, there is large bearing capacity on the coal side of the roadway entity. The force on the side of the coal pillar is relatively small. When the width of the coal pillar ranges from 25 m to 45 m, the vertical stress on the roadway and surrounding areas is relatively high. Pressure relief measures need to be taken during mining to reduce surrounding rock stress. When the width of the coal pillar is greater than 45 m, the peak stress of the coal pillar is located in the deep part of the surrounding rock, but it still has a certain impact on the roadway. It is necessary to take pressure relief measures to transfer the stress to a deeper depth to ensure the stability of the triangular coal pillar during the safe mining period of the working face. This provides guidance for ensuring the stability of the triangular coal pillar during the safe mining period of the working face.

Time evolution of a squeezed chaotic field in an amplitude damping channel when used as a generating field for a squeezed number state

We investigate how an optical squeezed chaotic field（SCF） evolves in an amplitude dissipation channel. We have used the integration within ordered product of operators technique to derive its evolution law. We also show that the density operator of SCF can be viewed as a generating field of the squeezed number state.

Effects of Strain Rate and Fiber Content on the Dynamic Mechanical Properties of Sisal Fiber Cement-Based Composites

In this paper,a split Hopkinson pressure bar(SHPB)was used to investigate the dynamic impact mechanical behavior of sisal fiber-reinforced cement-based composites(SFRCCs),and the microscopic damage evolution of the composites was analyzed by scanning electron microscopy(SEM)and energy-dispersive X-ray spectrome-try(EDS).The results show that the addition of sisal fibers improves the impact resistance of cement-based composite materials.Compared with ordinary cement-based composites(OCCs),the SFRCCs demonstrate higher post-peak strength,ductility,and energy absorption capacity with higher fiber content.Moreover,the SFRCCs are strain rate sensitive materials,and their peak stress,ultimate strain,and energy integrals all increase with increasing strain rate.From the perspective of fracture failure characteristics,the failure of OCCs is dominated by the brittle failure of crystal cleavage.In contrast,the failure mode of the SFRCCs changes to microscale matrix cracks,multi-scale pull-out interface debonding of fibers(fine filaments and bundles),and mechanical interlock.This research provides an experimental basis for the engineering application of high-performance and green cement-based composites.

Creep damage evolution process of asphalt binder based on viscoelastic characteristics

The creep damage evolution of asphalt binder plays a significant role in investigating the formation mechanism of rutting.The rutting is the common distress at high temperatures for asphalt pavements.However,the reliability of existing creep damage parameters is under questioned,and these parameters cannot accurately illustrate the change of intrinsic microstructure for asphalt binder.In this paper,a new test protocol was given access to study the evolution of viscoelastic parameters during creep damage.It was completed by inserting the frequency sweep during creep test.The frequency sweep curve clusters were fitted by the generalized Kelvin-Voigt model for obtaining the change law of model parameters.Based on the change law and sensitivity analysis of model parameters,(E_(2)+E_(3))/2 was proposed as the creep damage variable.According to the curve of(E_(2)+E_(3))/2 versus loading time,two stages during the creep test could be identified:an approximate constant value in phase I and a linear decrease in phase II.Intrinsic differences about creep property of binders could be determined by this new proposed parameter.Above results not only ensure better understanding of the creep damage mechanism of binders,but also lay the theoretical foundation on predicting the anti-rutting performance of binders.

由天道走向人道——论进化论思想在近代中国的道德化解读

进化论在近代中国的传播是一个影响深远又纷争不断的事件。以严复、梁启超、孙中山为代表的近代学者对进化论进行了中国化的解读。严复强调任天为治,又强调以人持天,天道与人道呈现出双重结构。梁启超合群竞争式的进化理论,强调的是人治与天行的抗争。孙中山借用互助论来限制进化论,提出互助进化理论,其基本观点是人事胜天。天道人道之间,学者们一致走上了对人道力量的强调,尤其是对道德力量的强调。这与近代"道德救国"的思潮走到了一起。

吉登斯关于历史唯物主义“进化论”批判的省思

面对社会历史领域中的客体主义与主体主义的分歧,英国当代著名社会学家和政治思想家安东尼·吉登斯(Anthony Giddens)对社会历史领域中的核心问题——社会构成、社会变迁、社会类型予以结构化的理解,试图解决主体与客体、主观与客观、微观与宏观的二元对立问题。特别是其通过批判历史唯物主义的"进化论",力求建构起"片段变迁"理论解释社会变迁。这种理论建构虽具有一定的意义,但也存在着众多的误读。

西方法律盲目演进主义刍议

法律盲目演进主义是法律盲目演变与进化的理论统称。它的各种理论形态揭示了法律发展的盲目特性,但大都难以摆脱目的理性或大或小的影响。盲目性与目的性相互排斥、彼此不容,在特定法律发展过程中两者又不能孤立存在而是互相依存的,正是在矛盾中推动了法的进化。

结构功能主义、法律进化论和法律的自动生成理论——卢曼的法社会学思想评述

卢曼是一位独具匠心的社会法学家。他在帕森斯的社会结构主义思想和管理理论的双重影响下 ,系统地提出了结构功能主义 ,法律进化论和法律的自动生成理论 ,揭示了法律与社会的密切联系和法律发展所具有的相对独立性。这些思想对我国的法学研究和法制建设都极具启发意义。

Effect of Mineral on Metallurgical Coke Solution Loss Reaction in Blast Furnace

According to the principle of damage mechanics, the damage characteristics of ferrite nodular cast iron under uniaxial stress were studied by measuring electric resistance. The results show that the damage in nodular cast iron occurs when the applied stress is more than a certain extent, and the damage variable increases with stress. The evolutional law of damage variable as a function of stress was obtained. The damage threshold of nodular cast iron increases with nodularity, but it is below the yield strength, which provides reference significance to the design of machinery structure and the choice of materials. The critical damage variable is not related to the nodularity, which is about 0 060-0 068.