Energy determines the ability of matter to work. However, in the given environment, the real usefulness to perform work is determined by exergy. This study covers not only solar, but also any monochromatic thermal rad...Energy determines the ability of matter to work. However, in the given environment, the real usefulness to perform work is determined by exergy. This study covers not only solar, but also any monochromatic thermal radiation. The value of such radiation was determined by its exergy and the ratio of its exergy-to-energy. A novelty in this work is to demonstrate by means of exergy that the usefulness of thermal polychromatic radiation can be increased by its dispersion to monochromatic radiation. This effect is the greater, the lower the temperature of the radiation. Analogies of this effect to the exergetic effect of gas separation have been indicated. The effect of the increase in exergy in the process of radiation dispersion was interpreted by means of a cylinder-piston system that explains this effect with the influence of environmental radiation. The concept of quasi-monochromatic and cumulated radiation was introduced into dispersion considerations and the change in the energetic, entropic and environmental components of the exergy of radiation beams was analyzed. Considerations were illustrated with appropriate examples of calculations considering dispersion of high-temperature radiation, such as extraterrestrial solar radiation and dispersion of low-temperature radiation from water vapor.展开更多
For a long time,China's regional water resource imbalance has restricted the development of coal chemical industry,and it is imperative to achieve zero liquid discharge(ZLD).Therefore,the game relationship between...For a long time,China's regional water resource imbalance has restricted the development of coal chemical industry,and it is imperative to achieve zero liquid discharge(ZLD).Therefore,the game relationship between technical indicators,costs and emissions in ZLD process of fixed-bed coal gasification wastewater treatment process should be explored in detail.According to the accurate model,the simulation for ZLD of fixed-bed coal gasification wastewater treatment process is established,and this process is assessed from the perspective of thermodynamics,economy,and environment.The total energy consumption of ZLD process before optimization is 4.032×10^(8)W.The results of exergy analysis show exergy destruction of ZLD process is 94.55%.For economic and environmental results,the total annual cost is 1.892×10^(7)USD·a^(-1)and the total environmental impact is 4.782×10^(-8).The total energy consumption of the optimal six-step ZLD process based on multi-objective optimization is 4.028×10^(8)W.The CO_(2)content in the treated wastewater is 0.1%.This study will have an important role in promoting the establishment of the ZLD process for coal chemistry industry.展开更多
Waste heat recovery is one of the possible solutions to improve the efficiency of internal combustion engines.Instead of wasting the exhaust stream of an energy conversion system into the environment,its residual ener...Waste heat recovery is one of the possible solutions to improve the efficiency of internal combustion engines.Instead of wasting the exhaust stream of an energy conversion system into the environment,its residual energy content can be usefully recovered,for example in Organic Rankine Cycles(ORC).This technology has been largely consolidated in stationary power plants but not yet for mobile applications,such as road transport,due to the limitations in the layout and to the constraints on the size and weight of the ORC system.An ORC system installed on the exhaust line of a bus powered by a natural gas spark ignition engine has been investigated.The thermal power available at engine exhaust has been evaluated by measuring gas temperature and mass flow rate during real driving operation.The waste thermal power has been considered as heat input for the ORC plant simulation.A detailed heat exchanger model has been developed because it is a crucial component for the ORC performance.The exergy analysis of the ORC was performed comparing different working fluids:R601,R1233zd(E)and two zeotropic blends of the two organic pure fluids.The model allowed the evaluation of the ORC produced energy over the driving cycle and the potential benefit on the engine efficiency.展开更多
To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field ...To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field and temperature field of the generator.The loss distribution of the motor is accurately obtained by considering the influence of external circuit characteristics on its internal physical field.By mapping the losses to the corresponding part of the three-dimensional finite element model of the motor,the temperature field is solved,and the global temperature distribution of the generator,considering the influence of end windings,is obtained.By changing the air gap length,permanent magnet thickness,and winding conductivity,the relationship between the loss,temperature rise,and exergy efficiency can be obtained.By optimizing the air gap length,permanent magnet thickness,and winding conductivity,the best configuration and material properties can improve the efficiency of the motor by up to 4%.展开更多
The thermodynamic theories and ecological theories can be integrated effectively by exergy(biogeochemical energy of the system) to study the environmental problems of the lakes and reservoirs. In this paper, the appl...The thermodynamic theories and ecological theories can be integrated effectively by exergy(biogeochemical energy of the system) to study the environmental problems of the lakes and reservoirs. In this paper, the applications of exergy in the ecological modelling of lake environment were reviewed. Results showed that exergy can be used as a goal function to estimate the parameters of the ecological model for lakes and reservoirs and to develop the structural dynamic models accounting for the changes in lake ecosystems, and as an ecological indicators for the development and evolution of lake ecosystems.展开更多
Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a powergeneration system. In the present study, the typical problem connected to the excessively high superheat ...Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a powergeneration system. In the present study, the typical problem connected to the excessively high superheat degree ofextraction steam in an ultra-supercritical (USC) double-reheat unit is considered. Using a 1000 MW power plantas an example, two systems (case 1 and case 2) are proposed, both working in combination with a regenerativesteam turbine. The thermal performances of these two systems are compared with that of the original systemthrough a heat balance method and an exergy balance strategy. The results reveal that the two coupled systemscan significantly reduce the superheat degree of extraction steam, turbine heat rate, and coal consumption of theunit and improve the energy utilization efficiency. These results will provide useful theoretical guidance to futureinvestigators wishing to address the general problem relating to energy conservation and modelling of the coupledextraction steam regenerative system of USC double-reheat units.展开更多
In this paper, we present an analysis of energy and exergy utilization in the residential sector of Cameroon by considering the sectoral energy and exergy flows for the years of 2001-2010. Exergy analysis of Cameroon ...In this paper, we present an analysis of energy and exergy utilization in the residential sector of Cameroon by considering the sectoral energy and exergy flows for the years of 2001-2010. Exergy analysis of Cameroon residential sector utilisation indicates a less efficient picture than that obtained by the energy analysis. Cooking stands out as the most inefficient end use in the Cameroon’s residential sector. In 2010, the energy and exergy efficiency are determined and were respectively 58.74% and 22.63%. Energy and exergy flows diagrams for the overall efficiencies of Cameroon residential sector are illustrated and a comparison with the residential sector of other countries is also done. To carry out this study, a survey of 250 households was conducted and the sharing of the end uses of energy was done and data were gathered.展开更多
Solar energy is replacing more and more traditional sources of energy because of the fact that it’s also fighting about global warming. This study is based on exergy analysis of a double-effect series flow absorption...Solar energy is replacing more and more traditional sources of energy because of the fact that it’s also fighting about global warming. This study is based on exergy analysis of a double-effect series flow absorption refrigeration system powered by solar energy in Ngaoundere. The simulation is done on the basis of a half hourly analysis for the first time, from 6.30 AM to 6.30 PM, using water-lithium bromide as working pair. The main parameters for the performance of an absorption cycle, which are the COP and the ECOP, have been analyzed and the results show that this two parameters increase while increasing the temperature of the main generator. The exergy loss of each component of the system and the total exergy loss of the system have been analyzed and their effectiveness calculated, using the first and second law of thermodynamics. The highest exergy loss occurs in the main generator GI and in the absorber, making these components more important in an absorption cycle. This analysis is based on a mathematical model using FORTRAN?language. The results obtained may be useful for the optimization of solar absorption refrigeration systems.展开更多
In the first part of this investigation, a Natural Gas Combined Cycle (NGCC) producing 620 MW of electricity was simulated using the commercial software Aspen Hysys V9.0 and the Soave-Redlich-Kwong (SRK) equation of s...In the first part of this investigation, a Natural Gas Combined Cycle (NGCC) producing 620 MW of electricity was simulated using the commercial software Aspen Hysys V9.0 and the Soave-Redlich-Kwong (SRK) equation of state. The aim of this second part is to use exergy-based analyses in order to calculate its exergy efficiency and evaluate its environmental impact under standard conditions. For the exergy efficiency, the performance index under investigation is the exergy destruction ratio (yD). The results of the study show that the combustor is the main contributor to the total exergy destruction of the power plant (yD = 24.35%) and has the lowest exergy efficiency of 75.65%. On the other hand, the Heat Recovery Steam Generator (HRSG) has the lowest contribution to the exergy destruction (yD = 5.63%) of the power plant and the highest exergy efficiency of 94.37%. For the overall power plant, the exergy efficiency is equal to 53.28%. For the environmental impact of the power plant, the relative difference of exergy-related environmental impacts (rb) is utilized as the performance index for each equipment of the plant and the environmental impact of a kWh of electricity (EIE) is used to represent the performance index of the overall power plant. In agreement with the exergy analysis, the results indicate that the combustor and the HRSG have respectively the highest (rb = 32.19%) and the lowest (rb = 5.96%) contribution to the environmental impact. The environmental impact of a kWh of electricity of the power plant is 34.26 mPts/kWh (exergy destruction only), and 34.42 mPts/kWh (both exergy destruction and exergy loss).展开更多
Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified...Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified” oil displacement which is obtained by traditional study methods in the exploitation territory of oil and gas fields has both respective roles and mutual cross shortages. To describe and analyze the displacement process of multi-field coupling with exergy transfer can simplify this kind of problem by introducing a unified goal-driving exergy. It needs to use the method of theoretical modeling, numerical simulation and experimental validation to study the basic law of exergy transfer in the oil displacement process of multi-field synergy, make a thorough research for the flooding process of steam injection with exergy transfer theory and reveal the oil displacement mechanism in steam injection of multi-field synergy. Thus the theory instruction and technical support can be provided to improve reservoirs producing degree and extraction ratio.展开更多
The influence of wake parameters on the exergy analysis of single array wind farm is studied in this paper. Key parameters which influence wake effects in a wind farm are wind velocity, tip speed ratio, number of blad...The influence of wake parameters on the exergy analysis of single array wind farm is studied in this paper. Key parameters which influence wake effects in a wind farm are wind velocity, tip speed ratio, number of blades, rotor speed, rotor diameter and hub height. Three different models namely power, wake and exergy model were used in estimating the exergy efficiency of the single array wind farm. Even though it is ideal for wind farms to fix the wind turbines in rows and columns the conditions of the site may not always be condu- cive for it. Hence analysis has been done keeping the wind turbines at random in a row and the effect of positioning on the performance is analyzed. Energy and exergy efficiency calculations were made for different cases by varying the positions of wind turbines in the single array wind farm. Standard relations were used in estimating the energy deficit in the wind farm due to wake effects. The wake effects were found to have an aggregated influence on the energy production of the wind farm, which results from the changes in the key parameters mentioned above. Potential areas for reducing energy losses by proper location and selection of turbines based on rating are highlighted. The influence of individual parameters contributing to the wake ef-fect were analyzed and discussed in detail.展开更多
Gas turbine (GT) power plants operating in arid climates suffer a decrease in output power during the hot summer months because of the high specific volume of air drawn by the compressor. Cooling the air intake to the...Gas turbine (GT) power plants operating in arid climates suffer a decrease in output power during the hot summer months because of the high specific volume of air drawn by the compressor. Cooling the air intake to the compressor has been widely used to mitigate this shortcoming. Energy and exergy analysis of a GT Brayton cycle coupled to a refrigeration air cooling unit shows a promise for increasing the output power with a little decrease in thermal efficiency. A thermo-economics algorithm is developed to estimate the economic feasibility of the cooling system. The analysis is applied to an open cycle, HITACHI-FS7001B GT plant at the industrial city of Yanbu (Latitude 24o 05” N and longitude 38o E) by the Red Sea in the Kingdom of Saudi Arabia. Result show that the enhancement in output power depends on the degree of chilling the air intake to the compressor (a 12 - 22 K decrease is achieved). For this case study, maximum power gain ratio (PGR) is 15.46% (average of 12.25%), at an insignificant decrease in thermal efficiency. The second law analysis show that the exergetic power gain ratio drops to an average 8.5%. The cost of adding the air cooling system is also investigated and a cost function is derived that incorporates time-dependent meteorological data, operation characteristics of the GT and the air intake cooling system and other relevant parameters such as interest rate, lifetime, and operation and maintenance costs. The profit of adding the air cooling system is calculated for different electricity tariff.展开更多
Exergy analysis is a critical aspect of Energy Engineering that can not be overstretched.The need for constant study in this area is very crucial due to it evolving nature.This study involved the analysis of exergy of...Exergy analysis is a critical aspect of Energy Engineering that can not be overstretched.The need for constant study in this area is very crucial due to it evolving nature.This study involved the analysis of exergy of an Experimental Domestic Scale Solar Water Heating System situated in Owerri,Imo State,Nigeria.There were couples of literature reviews done in relation to the study.It was aimed at analyzing the efficiency of solar water heating system.Basic materials involved in this study are solar radiation collector panel,storage tank,pump,heat exchanger,piping unit and heat transfer fluid.From the results,it recorded that collector outlet temperature is a function of solar radiation and time.Maximum Collector Efficiency occurred at 1 p.m.of the set up location time.It was further revealed that performance of the flat plate solar water heater(SWH)obtained maximum of 97%and minimum of 38%efficiencies at 1 p.m.and 5 p.m.respectively.The highest exergy efficiency gotten was 60%at 1 p.m.and the lowest was 1.9%at 9 a.m.Hence,exergy analysis is a useful method for optimizing performance of a flat plate solar water heating system due to it proportionality to basic quantities in solar studies.展开更多
文摘Energy determines the ability of matter to work. However, in the given environment, the real usefulness to perform work is determined by exergy. This study covers not only solar, but also any monochromatic thermal radiation. The value of such radiation was determined by its exergy and the ratio of its exergy-to-energy. A novelty in this work is to demonstrate by means of exergy that the usefulness of thermal polychromatic radiation can be increased by its dispersion to monochromatic radiation. This effect is the greater, the lower the temperature of the radiation. Analogies of this effect to the exergetic effect of gas separation have been indicated. The effect of the increase in exergy in the process of radiation dispersion was interpreted by means of a cylinder-piston system that explains this effect with the influence of environmental radiation. The concept of quasi-monochromatic and cumulated radiation was introduced into dispersion considerations and the change in the energetic, entropic and environmental components of the exergy of radiation beams was analyzed. Considerations were illustrated with appropriate examples of calculations considering dispersion of high-temperature radiation, such as extraterrestrial solar radiation and dispersion of low-temperature radiation from water vapor.
基金supported by the National Natural Science Foundation of China(22078166,22178188)。
文摘For a long time,China's regional water resource imbalance has restricted the development of coal chemical industry,and it is imperative to achieve zero liquid discharge(ZLD).Therefore,the game relationship between technical indicators,costs and emissions in ZLD process of fixed-bed coal gasification wastewater treatment process should be explored in detail.According to the accurate model,the simulation for ZLD of fixed-bed coal gasification wastewater treatment process is established,and this process is assessed from the perspective of thermodynamics,economy,and environment.The total energy consumption of ZLD process before optimization is 4.032×10^(8)W.The results of exergy analysis show exergy destruction of ZLD process is 94.55%.For economic and environmental results,the total annual cost is 1.892×10^(7)USD·a^(-1)and the total environmental impact is 4.782×10^(-8).The total energy consumption of the optimal six-step ZLD process based on multi-objective optimization is 4.028×10^(8)W.The CO_(2)content in the treated wastewater is 0.1%.This study will have an important role in promoting the establishment of the ZLD process for coal chemistry industry.
基金The authors gratefully acknowledge Universitàdegli studi della Campania“L.Vanvitelli”for funding the research project CHIMERA with V:ALERE 2019 grant。
文摘Waste heat recovery is one of the possible solutions to improve the efficiency of internal combustion engines.Instead of wasting the exhaust stream of an energy conversion system into the environment,its residual energy content can be usefully recovered,for example in Organic Rankine Cycles(ORC).This technology has been largely consolidated in stationary power plants but not yet for mobile applications,such as road transport,due to the limitations in the layout and to the constraints on the size and weight of the ORC system.An ORC system installed on the exhaust line of a bus powered by a natural gas spark ignition engine has been investigated.The thermal power available at engine exhaust has been evaluated by measuring gas temperature and mass flow rate during real driving operation.The waste thermal power has been considered as heat input for the ORC plant simulation.A detailed heat exchanger model has been developed because it is a crucial component for the ORC performance.The exergy analysis of the ORC was performed comparing different working fluids:R601,R1233zd(E)and two zeotropic blends of the two organic pure fluids.The model allowed the evaluation of the ORC produced energy over the driving cycle and the potential benefit on the engine efficiency.
基金supported by the National Natural Science Foundation of China(Nos.51966013,52066013)the Special Fund of Inner Mongolia Education Department(No.STZC202230).
文摘To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field and temperature field of the generator.The loss distribution of the motor is accurately obtained by considering the influence of external circuit characteristics on its internal physical field.By mapping the losses to the corresponding part of the three-dimensional finite element model of the motor,the temperature field is solved,and the global temperature distribution of the generator,considering the influence of end windings,is obtained.By changing the air gap length,permanent magnet thickness,and winding conductivity,the relationship between the loss,temperature rise,and exergy efficiency can be obtained.By optimizing the air gap length,permanent magnet thickness,and winding conductivity,the best configuration and material properties can improve the efficiency of the motor by up to 4%.
文摘The thermodynamic theories and ecological theories can be integrated effectively by exergy(biogeochemical energy of the system) to study the environmental problems of the lakes and reservoirs. In this paper, the applications of exergy in the ecological modelling of lake environment were reviewed. Results showed that exergy can be used as a goal function to estimate the parameters of the ecological model for lakes and reservoirs and to develop the structural dynamic models accounting for the changes in lake ecosystems, and as an ecological indicators for the development and evolution of lake ecosystems.
基金the Shandong Electric Power Engineering Consulting Institute science and technology project(Grant No.37-K2014-33).
文摘Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a powergeneration system. In the present study, the typical problem connected to the excessively high superheat degree ofextraction steam in an ultra-supercritical (USC) double-reheat unit is considered. Using a 1000 MW power plantas an example, two systems (case 1 and case 2) are proposed, both working in combination with a regenerativesteam turbine. The thermal performances of these two systems are compared with that of the original systemthrough a heat balance method and an exergy balance strategy. The results reveal that the two coupled systemscan significantly reduce the superheat degree of extraction steam, turbine heat rate, and coal consumption of theunit and improve the energy utilization efficiency. These results will provide useful theoretical guidance to futureinvestigators wishing to address the general problem relating to energy conservation and modelling of the coupledextraction steam regenerative system of USC double-reheat units.
文摘In this paper, we present an analysis of energy and exergy utilization in the residential sector of Cameroon by considering the sectoral energy and exergy flows for the years of 2001-2010. Exergy analysis of Cameroon residential sector utilisation indicates a less efficient picture than that obtained by the energy analysis. Cooking stands out as the most inefficient end use in the Cameroon’s residential sector. In 2010, the energy and exergy efficiency are determined and were respectively 58.74% and 22.63%. Energy and exergy flows diagrams for the overall efficiencies of Cameroon residential sector are illustrated and a comparison with the residential sector of other countries is also done. To carry out this study, a survey of 250 households was conducted and the sharing of the end uses of energy was done and data were gathered.
文摘Solar energy is replacing more and more traditional sources of energy because of the fact that it’s also fighting about global warming. This study is based on exergy analysis of a double-effect series flow absorption refrigeration system powered by solar energy in Ngaoundere. The simulation is done on the basis of a half hourly analysis for the first time, from 6.30 AM to 6.30 PM, using water-lithium bromide as working pair. The main parameters for the performance of an absorption cycle, which are the COP and the ECOP, have been analyzed and the results show that this two parameters increase while increasing the temperature of the main generator. The exergy loss of each component of the system and the total exergy loss of the system have been analyzed and their effectiveness calculated, using the first and second law of thermodynamics. The highest exergy loss occurs in the main generator GI and in the absorber, making these components more important in an absorption cycle. This analysis is based on a mathematical model using FORTRAN?language. The results obtained may be useful for the optimization of solar absorption refrigeration systems.
文摘In the first part of this investigation, a Natural Gas Combined Cycle (NGCC) producing 620 MW of electricity was simulated using the commercial software Aspen Hysys V9.0 and the Soave-Redlich-Kwong (SRK) equation of state. The aim of this second part is to use exergy-based analyses in order to calculate its exergy efficiency and evaluate its environmental impact under standard conditions. For the exergy efficiency, the performance index under investigation is the exergy destruction ratio (yD). The results of the study show that the combustor is the main contributor to the total exergy destruction of the power plant (yD = 24.35%) and has the lowest exergy efficiency of 75.65%. On the other hand, the Heat Recovery Steam Generator (HRSG) has the lowest contribution to the exergy destruction (yD = 5.63%) of the power plant and the highest exergy efficiency of 94.37%. For the overall power plant, the exergy efficiency is equal to 53.28%. For the environmental impact of the power plant, the relative difference of exergy-related environmental impacts (rb) is utilized as the performance index for each equipment of the plant and the environmental impact of a kWh of electricity (EIE) is used to represent the performance index of the overall power plant. In agreement with the exergy analysis, the results indicate that the combustor and the HRSG have respectively the highest (rb = 32.19%) and the lowest (rb = 5.96%) contribution to the environmental impact. The environmental impact of a kWh of electricity of the power plant is 34.26 mPts/kWh (exergy destruction only), and 34.42 mPts/kWh (both exergy destruction and exergy loss).
文摘Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified” oil displacement which is obtained by traditional study methods in the exploitation territory of oil and gas fields has both respective roles and mutual cross shortages. To describe and analyze the displacement process of multi-field coupling with exergy transfer can simplify this kind of problem by introducing a unified goal-driving exergy. It needs to use the method of theoretical modeling, numerical simulation and experimental validation to study the basic law of exergy transfer in the oil displacement process of multi-field synergy, make a thorough research for the flooding process of steam injection with exergy transfer theory and reveal the oil displacement mechanism in steam injection of multi-field synergy. Thus the theory instruction and technical support can be provided to improve reservoirs producing degree and extraction ratio.
文摘The influence of wake parameters on the exergy analysis of single array wind farm is studied in this paper. Key parameters which influence wake effects in a wind farm are wind velocity, tip speed ratio, number of blades, rotor speed, rotor diameter and hub height. Three different models namely power, wake and exergy model were used in estimating the exergy efficiency of the single array wind farm. Even though it is ideal for wind farms to fix the wind turbines in rows and columns the conditions of the site may not always be condu- cive for it. Hence analysis has been done keeping the wind turbines at random in a row and the effect of positioning on the performance is analyzed. Energy and exergy efficiency calculations were made for different cases by varying the positions of wind turbines in the single array wind farm. Standard relations were used in estimating the energy deficit in the wind farm due to wake effects. The wake effects were found to have an aggregated influence on the energy production of the wind farm, which results from the changes in the key parameters mentioned above. Potential areas for reducing energy losses by proper location and selection of turbines based on rating are highlighted. The influence of individual parameters contributing to the wake ef-fect were analyzed and discussed in detail.
文摘Gas turbine (GT) power plants operating in arid climates suffer a decrease in output power during the hot summer months because of the high specific volume of air drawn by the compressor. Cooling the air intake to the compressor has been widely used to mitigate this shortcoming. Energy and exergy analysis of a GT Brayton cycle coupled to a refrigeration air cooling unit shows a promise for increasing the output power with a little decrease in thermal efficiency. A thermo-economics algorithm is developed to estimate the economic feasibility of the cooling system. The analysis is applied to an open cycle, HITACHI-FS7001B GT plant at the industrial city of Yanbu (Latitude 24o 05” N and longitude 38o E) by the Red Sea in the Kingdom of Saudi Arabia. Result show that the enhancement in output power depends on the degree of chilling the air intake to the compressor (a 12 - 22 K decrease is achieved). For this case study, maximum power gain ratio (PGR) is 15.46% (average of 12.25%), at an insignificant decrease in thermal efficiency. The second law analysis show that the exergetic power gain ratio drops to an average 8.5%. The cost of adding the air cooling system is also investigated and a cost function is derived that incorporates time-dependent meteorological data, operation characteristics of the GT and the air intake cooling system and other relevant parameters such as interest rate, lifetime, and operation and maintenance costs. The profit of adding the air cooling system is calculated for different electricity tariff.
文摘Exergy analysis is a critical aspect of Energy Engineering that can not be overstretched.The need for constant study in this area is very crucial due to it evolving nature.This study involved the analysis of exergy of an Experimental Domestic Scale Solar Water Heating System situated in Owerri,Imo State,Nigeria.There were couples of literature reviews done in relation to the study.It was aimed at analyzing the efficiency of solar water heating system.Basic materials involved in this study are solar radiation collector panel,storage tank,pump,heat exchanger,piping unit and heat transfer fluid.From the results,it recorded that collector outlet temperature is a function of solar radiation and time.Maximum Collector Efficiency occurred at 1 p.m.of the set up location time.It was further revealed that performance of the flat plate solar water heater(SWH)obtained maximum of 97%and minimum of 38%efficiencies at 1 p.m.and 5 p.m.respectively.The highest exergy efficiency gotten was 60%at 1 p.m.and the lowest was 1.9%at 9 a.m.Hence,exergy analysis is a useful method for optimizing performance of a flat plate solar water heating system due to it proportionality to basic quantities in solar studies.