Fluorographene with Narrow Lateral Size and Thickness Distributions Prepared for Enhancing Lubrication Performance of Bentonite Grease

Fluorographene(FG)with narrow lateral size and thickness distributions was prepared by a liquid-phase exfoliation method,based on liquid cascade centrifugation.The Rtec MFT-5000 tribo-meter was used to investigate the lubricating performance of bentonite grease enhanced by the as-prepared FG.The results showed that the coefficient of friction and the wear volume of bentonite grease with 0.3 wt%FG were decreased by 20.4%and 44.9%,respectively,as compared to those of the base grease.The main reason is that FG can promote the formation of the tribo-chemical reaction film consisting of complex carbon oxide,Fe_(2)O_(3)and FeF_(3)on the friction surface,which can remarkably improve the performance of friction reduction and prevent the appearance of severe wear.

One-Step Scalable Fabrication of Nitrogen and Chlorine Co-doped Graphene by Electrochemical Exfoliation for High-Performance Supercapacitors

The stacking and aggregation of graphene nanosheets have been obstacles to their application as electrode materials for microelectronic devices.This study deploys a one-step,scalable,facile electrochemical exfoliation technique to fabricate nitrogen(N)and chlorine(Cl)co-doped graphene nanosheets(i.e.,N-Cl-G)via the application of constant voltage on graphite in a mixture of 0.1 mol/L H_(2)SO_(4)and 0.1 mol/L NH_(4)Cl without using dangerous and exhaustive operation.The introduction of Cl(with its large radius)and N,both with high electrical negativity,facilitates the modulation of the electronic structure of graphene and creation of rich structural defects in it.Consequently,in the as-constructed supercapacitors,N-Cl-G exhibits a high specific capacitance of 77 F/g at 0.2 A/g and remarkable cycling stability with 91.7%retention of initial capacitance after 20,000 cycles at 10 A/g.Furthermore,a symmetrical supercapacitor assembled with N-Cl-G as the positive and negative electrodes(denoted as N-Cl-G//N-Cl-G)exhibits an energy density of 3.38 Wh/kg at a power density of 600 W/kg and superior cycling stability with almost no capacitance loss after 5000 cycles at 5 A/g.This study provides a scalable protocol for the facile fabrication of high-performance co-doped graphene as an electrode material candidate for supercapacitors.

Impact of cooling rate on exfoliation corrosion resistance of a Li-containing 7xxx aluminum alloy

The impact of cooling rate after solution heat treatment on exfoliation corrosion resistance of a Li-containing 7xxx aluminum alloy was investigated by accelerated immersion and electrochemical impedance spectroscopy test,optical microscope,electron backscatter diffraction and scanning transmission electron microscope.With the decrease of cooling rate from 1700℃/s to 4℃/s,exfoliation corrosion resistance of the aged specimens decreases with rating changing from EA to EC and the maximum corrosion depth increasing from about 169.4μm to 632.1μm.Exfoliation corrosion tends to develop along grain boundaries in the specimens with cooling rates higher than about 31℃/s and along both grain boundaries and sub-grain boundaries in the specimens with lower cooling rates.The reason has been discussed based on the changes of the microstructure and microchemistry at grain boundaries and sub-grain boundaries due to slow cooling.

Ultraviolet Photodetector based on Sr_(2)Nb_(3)O_(10) Perovskite Nanosheets

Liquid-phase exfoliation was employed to synthesize Sr_(2)Nb_(3)O_(10) perovskite nanosheets with thicknesses down to 1.76 nm.Transmission electron microscopy(TEM),atomic force microscope(AFM),X-ray photoelectron spectrometer(XPS),and other characterization techniques were used to evaluate the atomic structure and chemical composition of the exfoliated nanosheets.A UV photodetector based on individual Sr_(2)Nb_(3)O_(10) nanosheets was prepared to demonstrate the application of an ultraviolet(UV) photodetector.The UV photodetector exhibited outstanding photocurrent and responsivity with a responsivity of 3×10^(5) A·W^(-1) at 5 V bias under 280 nm illumination,a photocurrent of 60 nA,and an on/off ratio of 3×10^(2).

Effect of interrupted aging on mechanical properties and corrosion resistance of 7A75 aluminum alloy

The effects of interrupted aging on mechanical properties and corrosion resistance of 7A75 aluminum alloy extruded bar were investigated through various analyses,including electrical conductivity,mechanical properties,local corrosion properties,and slow strain rate tensile stress corrosion tests.Microstructure characterization techniques such as metallographic microscopy,scanning electron microscopy(SEM),and transmission electron microscopy(TEM)were also employed.The results indicate that the tensile strength of the alloy produced by T6I6 aging is similar to that produced by T6I4 aging,and it even exceeds 700 MPa.Furthermore,the yield strength increases by 52.7 MPa,reaching 654.8 MPa after T6I6 aging treatment.The maximum depths of intergranular corrosion(IGC)and exfoliation corrosion(EXCO)decrease from 116.3 and 468.5μm to 89.5 and 324.3μm,respectively.The stress corrosion factor also decreases from 2.1%to 1.6%.These findings suggest that the alloy treated with T6I6 aging exhibits both high strength and excellent stress corrosion cracking resistance.Similarly,when the alloy is treated with T6I4,T6I6 and T6I7 aging,the sizes of grain boundary precipitates(GBPs)are found to be 5.2,18.4,and 32.8 nm,respectively.The sizes of matrix precipitates are 4.8,5.7 and 15.7 nm,respectively.The atomic fractions of Zn in GBPs are 9.92 at.%,8.23 at.%and 6.87 at.%,respectively,while the atomic fractions of Mg are 12.66 at.%,8.43 at.%and 7.00 at.%,respectively.Additionally,the atomic fractions of Cu are 1.83 at.%,2.47 at.%and 3.41 at.%,respectively.

Microwave-Assisted Confining Growth and Liquid Exfoliation of sp^(3)-Hybrid Carbon Nitride Nano/Micro-Crystals

As one promising carbon-based material,sp^(3)-hybrid carbon nitride has been predicted with various novel physicochemical properties.However,the synthesis of sp^(3)-hybrid carbon nitride is still limited by the nanaoscale,low crystallinity,complex source,and expensive instruments.Herein,we have presented a facile approach to the sp^(3)-hybrid carbon nitride nano/micro-crystals with microwave-assisted confining growth and liquid exfoliation.Actually,the carbon nitride nano/micro-crystals can spontaneously emerge and grow in the microwave-assisted polymerization of citric acid and urea,and the liquid exfoliation can break the bulk disorder polymer to retrieve the highly crystalline carbon nitride nano/micro-crystals.The obtained carbon nitride nano/micro-crystals present superior blue light absorption strength and surprising photoluminescence quantum yields of 57.96% in ethanol and 18.05%in solid state.The experimental characterizations and density functional theory calculations reveal that the interface-trapped localized exciton may contribute to the excellent intrinsic light emission capability of carbon nitride nano/micro-crystals and the interparticle staggered stacking will prevent the aggregation-caused-quenching partially.Finally,the carbon nitride nano/micro-crystals are demonstrated to be potentially useful as the phosphor medium in light-emitting-diode for interrupting blue light-induced eye damage.This work paves new light on the synthesis strategy of sp^(3)-hybrid carbon nitride materials and thus may push forward the development of multiple carbon nitride research.

A Method of Evaluation Efficacy of Cosmetics Exfoliator and Its Application

Measuring the tanning skin can provide a scientific method to evaluate the efficacy of cosmetics exfoliator.Dihydroxyacetone(DHA,5.0%(w/w))was used to stain the inner forearms cuticle of subjects.The skin surface L*and b*were determined,then ITA and its recovery rate were calculated to evaluate the exfoliating efficacy of cosmetics.The results showed that no significant(P≥0.05)differences were observed for L*,b*and ITA on different skin surface of unstained subjects.After staining with DHA,no adverse reaction was found in the stained areas,and the changes of L*,b*and ITA on different skin surface were consistent(P≥0.05).Two different cosmetics were used continuously to exfoliate the skin in different areas.After treatment for 7 days,the corresponding areas of skin L*,b*and ITA had significant(P<0.05)improvement in comparison with negative control area.But there were differences in the evaluation results of the exfoliation efficacy using these three parameters.The recovery rate of ITA of two samples improved significantly(P<0.05)than the negative control area.The work indicated that using 5.0%DHA for skin browning and measuring the skin surface color change by ITA recovery rate can accurately and sensitively assess the skin cuticle renewal rate difference.This method can be used as one of the effective way to evaluate the efficacy of cosmetics exfoliation.

Exfoliation corrosion behavior of 7050-T6 aluminum alloy treated with various quench transfer time

The exfoliation corrosion （EFC） behavior of 7050-T6 aluminum alloy treated with various quench transfer time after solution heat treatment was investigated by standard EFC immersion tests, strength loss measurements after EFC tests and electrochemical impedance spectroscope （EIS） technique. The results showed that EFC resistance of the alloy decreased with increasing quench transfer time. Backscattered electron scanning electron microscope （SEM） together with transmission electron microscope （TEM） observations revealed that the coverage ratio and microstructure of precipitates at grain boundary area are the most important factors which influence the EFC susceptibility of the alloy, while precipitate-free zone （PFZ） near grain boundary has no or only a minor effect on it. In addition, galvanostatic measurements of the alloy present a good correlation between EFC resistance and transients in potential. The cumulated number of transients in potential can be used to evaluate EFC resistance of the alloy.

Influence of dual retrogression and re-aging temper on microstructure,strength and exfoliation corrosion behavior of Al-Zn-Mg-Cu alloy

Influence of dual retrogression and re-aging（dual-RRA） temper on microstructure,strength and exfoliation corrosion（EC） behavior of Al-Zn-Mg-Cu alloy was investigated by hardness measurements,tensile properties tests,exfoliation corrosion tests,transmission electron microscopy（TEM） and scanning electron microscopy（SEM） observation combined energy dispersive X-ray detector（EDX） analysis.Dual-RRA temper maintains the matrix precipitates（MPs） similar to RRA temper,meanwhile obtains coarser and sparser grain boundary precipitates（GBPs） as well as higher Cu and lower Zn content compared with T76 temper.Therefore,dual-RRA temper not only keeps strength equivalent to the RRA temper but also obtains higher EC resistance than T76 temper.

Effect of flame rectification on corrosion property of Al-Zn-Mg alloy

The corrosion resistance of Al？Zn？Mg alloy subjected to different times in flame rectification was investigated based on the exfoliation corrosion test. The results indicate that the flame rectification deteriorates the exfoliation corrosion resistance of Al？Zn？Mg alloy. The corrosion resistance of Al-Zn-Mg alloy is ranked in the following order： base metal〉two times〉three times〉one time of flame rectification. The exfoliation corrosion behavior was discussed based on the transformation of precipitates at grain boundaries and matrix. With increasing the number of times in flame rectification, the precipitate-free zones disappeared and the precipitates experienced dissolution and re-precipitation. The sample was seriously corroded after one time of flame rectification, because the precipitates at grain boundaries are more continuous than those in other samples.

Dental pulp cell bank as a possible future source of individual hepatocytes

Mesenchymal stem cells(MSCs) as a source for regenerative medicine are now the subject of much clinical attention. There are high expectations due to their safety, low tumorigenic risk, and low ethical concerns. MSC therapy has been approved for acute graft-versus host diseases since 2015. Tooth-derived MSCs are known to have a great potential in their proliferation and differentiation capacities, even when compared with bone-marrow-derived MSCs. In particular, stem cells from human exfoliated deciduous teeth(SHEDs) are the best candidates for personal cell banking(dental pulp cell bank), because they can be obtained less invasively in the natural process of individual growth. SHEDs are known to differentiate into hepatocytes. There have been several studies showing the effectiveness of SHEDs on the treatment of liver failure in animal models. They may exert their effects either by repopulation of cells in injured liver or by paracrine mechanisms due to their immuneregulatory functions. Moreover, it may be possible to use each individuals' dental pulp cells as a future source of tailor-made differentiated hepatocytes in the context of a bioartificial liver or liver-on-a-chip to screen for drug toxicity.

巴林左旗第四纪冰川地貌初步识别

通过对巴林左旗第四纪冰川地貌的实地考察,作者对巴林左旗第四纪冰川遗迹进行了识别.巴林左旗第四纪冰川遗迹丰富多样,包括刃脊、角峰、冰斗、羊背石、剥离面理、冰臼、泄水槽等,充分证实了赤峰地区第四纪广泛发育过大规模的冰川运动.

Analysis of Human Papillomavirus Infection in Cervical Exfoliated Cells

To screen patients with early cervical lesions by analyzing the infection of high-risk Human papillomavirus (HR-HPV). Research Methods: The cervical exfoliated cell specimens and their clinical data were collected. The HPV infection types of the collected specimens were detected by fluorescence quantitative PCR, and the correlation between HPV infection and clinicopathological features was analyzed statistically. Results: 725 cases were HR-HPV positive from 2605 cases, including 15 high-risk types of HPV16, 18, 31, 33, 35, 39, 45, 51, 52, 53, 56, 58, 59, 66, 68. Different histological types ranged from NILM to HSIL, and the positive rate of HPV showed an increasing trend with the aggravation of cervical lesions. Conclusion: The positive rate of 15 high-risk HPV types in the collected specimens was 27.8%. Patients with early cervical lesions could be screened for 15 high-risk HPV infection types.

Transplantation of stem cells from human exfoliated deciduous teeth for bone regeneration in the dog mandibular defect

AIM: To investigate the effect of stem cells from human exfoliated deciduous teeth(SHED) transplanted for bone regeneration in the dog mandibular defect.METHODS: In this prospective comparative study, SHEDs had been isolated 5 years ago from human exfoliated deciduous teeth. The undifferentiated stem cells were seeded into mandibular bone through-andthrough defects of 4 dogs. Similar defects in control group were filled with cell-free collagen scaffold. After 12 wk, biopsies were taken and morphometric analysis was performed. The percentage of new bone formation and foreign body reaction were measured in each case. The data were subject to statistical analysis using the Mann-Whitney U and Kruskalwalis statistical tests. Differences at P < 0.05 was considered as significant level.RESULTS: There were no significant differences between control and SHED-seeded groups in connective tissue(P = 0.248), woven bone(P = 0.248) and compact bone(P = 0.082). There were not any side effects in transplanted SHED group such as teratoma or malignancy and abnormalities in this period.CONCLUSION: SHEDs which had been isolated and characterized 5 years ago and stored with cryopreservation banking were capable of proliferation and osteogenesis after 5 years, and no immune response was observed after three months of seeded SHEDs.

Corrosion behavior of an Al-6Mg-Sc-Zr alloy

The corrosion behavior of an Al-6Mg-Sc-Zr alloy was studied and compared with that of an Al-6Mg-Zr alloy. The addition of scandium into the Al-6Mg-Zr alloy reduced the susceptibility to exfoliation corrosion. By using the constant load tensile method in a 3.5 wt.% NaCl solution, the resistance to SCC of the Al-6Mg-Sc-Zr alloy was higher than that of the Al-6Mg-Zr alloy. When the specimens were not applied with an anodic current, the Al-6Mg-Sc-Zr alloy was resistance to SCC and no brittle cracking was found on the fracture surface. When an anodic current was applied, the Al-6Mg-Sc-Zr alloy specimens failed as a result of accelerated corrosion rather than SCC. It was believed that the addition of scandium re- sulted in （Al3Sc, Zr） particles that greatly refined grains and promoted the formation of homogeneous discontinuous distribution of β-phase in the alloy base, which much contributed to good corrosion resistance of the Al-6Mg-Sc-Zr alloy.

A flexible solid-state supercapacitor based on graphene/polyaniline paper electrodes

The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper renders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyaniline (PANi) nanorods via electrochemical polymerization. The deposit ion of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper (PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm^-2 in three-electrode system at a current density of 0.2 mA cm^-2 which is around 10 times larger than that of pris-tine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to determine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitanee of 123 mF cm^-2, corresponding to an areal energy density of 17.1 μWh cm^-2 and an areal power density of 0.25 mW cm^-2. The symmetric capacitor held a capacitive retention of 74.8% after 500 bending tests from 0 to 120°, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.

Beyond Graphene Anode Materials for Emerging Metal Ion Batteries and Supercapacitors

Intensive research effort is currently focused on the development of efficient, reliable, and environmentally safe electrochemical energy storage systems due to the ever-increasing global energy storage demand. Li ion battery systems have been used as the primary energy storage device over the last three decades. However, low abundance and uneven distribution of lithium and cobalt in the earth crust and the associated cost of these materials, have resulted in a concerted effort to develop beyond lithium electrochemical storage systems. In the case of non-Li ion rechargeable systems, the development of electrode materials is a significant challenge, considering the larger ionic size of the metal-ions and slower kinetics. Two-dimensional(2D) materials, such as graphene, transition metal dichalcogenides, MXenes and phosphorene, have garnered significant attention recently due to their multi-faceted advantageous properties: large surface areas, high electrical and thermal conductivity, mechanical strength, etc. Consequently, the study of 2D materials as negative electrodes is of notable importance as emerging non-Li battery systems continue to generate increasing attention. Among these interesting materials, graphene has already been extensively studied and reviewed, hence this report focuses on 2D materials beyond graphene for emerging non-Li systems. We provide a comparative analysis of 2D material chemistry, structure, and performance parameters as anode materials in rechargeable batteries and supercapacitors.

Electrochemical exfoliation of two-dimensional layered black phosphorus and applications

With the discovery of graphene,black phosphorus(BP)has been rediscovered as a two-dimensional(2 D)layered material.Since its first preparation in 2014,2 D BP has elicited immense interest,and has exhibited excellent properties,such as distinct pleated structures in layers,adjustable direct bandgap,high carrier mobility,moderate on/off ratio,large specific surface area,and various interesting in-layer anisotropies.However,the realization of these excellent properties depends on the preparation of highquality 2 D BP sheets.Electrochemical exfoliation methods are typically performed under mild conditions,thus,these methods are convenient,controllable,and can produce high-quality 2 D BP sheets.This review summarizes research progress in BP sheets preparation through anodic,cathodic,and electrolyte exfoliation in recent years.Different exfoliating methods affect the quality of 2 D BP sheets.Moreover,possible exfoliating mechanisms and the potential applications of different exfoliating methods are summarized and discussed in detail.Lastly,the shortcomings of existing research on electrochemical exfoliation are presented,and suggestions and prospects for future research on the electrochemical exfoliation of 2 D BP are proposed.

Capacitive charge storage enables an ultrahigh cathode capacity in aluminum-graphene battery

Aluminum^-graphene battery is promising for its abundant raw materials,high power density,ultralong cycle life and superior safety.However,the development of aluminum^-graphene battery is currently restricted by its insufficient cathode capacity,calling for a newly developed working mechanism.In addition,an irregular constant increase of the cathode capacity was always observed during cycling,but cannot be explained based on the current understanding.Here,we observed an increase of specific capacity by 60%with stable Coulombic efficiency of 98%during 7000 cycles life of Al-graphene batteries employing AlCl3/ET3NHCl electrolyte.We demonstrated this growing cathode capacity is attributed to an increasing contribution of capacitive charge storage during cycling,because a gradually enlarged surface area as capacitive active sites is enabled by the exfoliation of graphitic cathode during the periodic intercalation process.Moreover,the graphene cathode was exfoliated more significantly in AlCl3/ET3NHCl than 1-ethyl-3-methylimidazolium chloride-based electrolyte,which results from the heavier stress on the graphene layers caused by the larger intercalants in AlCl3/ET3NHCl.The common intercalation of cations with AlCl4-clusters was therefore supposed to occur during charging.This new proposed mechanism can offer the new thought for future design on high-capacity cathode of Al-ion battery.

Electrochemically exfoliated graphene as high-performance catalyst support to promote electrocatalytic oxidation of methanol on Pt catalysts

Electrochemically exfoliated graphene(EEG)is a kind of high-quality graphene with few oxygen-containing functional groups and defects on the surface,and thereby is more suitable as catalyst support than other carbon materials such as extensively used reduced graphene oxide(rGO).However,it is difficult to grow functional materials on EEG due to its inert surface.In this work,ultra-small Pt nanocrystals(~2.6 nm)are successfully formed on EEG and show better electrocatalytic activity towards methanol oxidation than Pt catalysts on r GO.The outstanding catalytic properties of Pt catalysts on EEG can be attributed to the fast electron transfer through EEG and high quality of Pt catalysts such as small grain size,high dispersibility and low oxidation ratio.In addition,SnO2 nanocrystals are controllably generated around Pt catalysts on EEG to raise the poison tolerance of Pt catalysts through using glycine as a linker.Owing to its outstanding properties such as high electrical conductivity and mechanical strength,EEG is expected to be widely used as a novel support for catalysts.