Application and failure evaluation of ferritic stainless steels for automotive exhaust systems

In recent years, with attention paid to global environmental problems, there have been requirements for continuous improvement of automobile fuel economy and exhaust gas purification rate. The properties of the ferritic stainless steels （FSS） used to make automobile parts have been improved. This paper introduces the construction of automotive exhaust systems and describes their main failure behaviors and corrosion evaluation procedures.

Optimizing the Exhaust System of Marine Diesel Engines to Improve Low-speed Performances and Cylinder Working Conditions

Proper design of exhaust systems in marine high-power turbocharged diesel engines can contribute to improve the low-speed performance of these engines and make the working conditions of the cylinders more uniform.Here a high-power marine 16-cylinder V-type turbocharged diesel engine is simulated using the GT-Power software.The results reveal the differences induced by different exhaust system structures,such as an 8-cylinder-inpipe exhaust system with single/double superchargers and a 4-cylinder-in-pipe exhaust system with a single supercharger.After a comparative analysis,the 8-cylinder type with double superchargers is determined to be the optimal solution,and the structure of the exhaust system is further optimized.The simulations show that the optimized maximum exhaust temperature difference among cylinders is reduced by 66%.Finally,the simulation results and the optimized performance of the designed exhaust system are verified through experiments.

Influence of the Hook Position on the Vertical Vibrations of an Automobile Exhaust System:Application of the Robust Optimization Design

A robust optimization design method is proposed to investigate the influence of the hook position on the vertical vibration(bending)of an automobile exhaust system.A block diagram for the robustness analysis of the exhaust system is initially constructed from the major affecting factors.Secondly,the second-order inertia force is set as the vibration excitation source of the exhaust system and the displacement of four hooks of the exhaust system is selected as the variable factor.Then tests are carried out to investigate the resulting vertical bending considering four influencing factors and three levels of analysis.Finally,a variance analysis of the vertical bending is performed.The present study provides a set of guidelines to control the key factors affecting the vibration of vehicle exhaust systems while proposing an effective method to reduce vehicle vibration and improve noise analysis。

Design of Mechanical Smoke Exhaust System in Large Space of Convention Center

The volumetric flow rate of smoke generated from the fire in large space often reaches to hundreds of thousands CMH because of extended floor height and as it’s more difficult to isolate the smoke to the limited area, comparing to normal-scale building, design and operation of effective smoke control system for large space is more than important. In this study, with the analysis model for such a large space as exhibition hall or conference room in conventional center, design of mechanical smoke exhaust system was conducted based on currently-available design standard which was then followed by numerical analysis of the design using 3D numerical analysis method. For conference room at 2.0 MW heat release rate, 99,173 CMH flow rate is required, if smoke layer is maintained at 60% of the floor height and for exhibition hall at 8.8 MW with 80% of floor height, flow rate required is 219,802 CMH, which are incorporated into the design. In view of 3D numerical analysis, accuracy of the design according to algebraic expression is sufficient.

Jet Noise Reduction of Double-Mixing Exhaust System

A jet noise reduction technique by using the external chevron nozzle with lobed mixer in the double-mixing exhaust system is investigated under cold conditions.The computations of jet field and the experiments of noise field are conducted with scaled model of high-bypass-ratio turbofan engine mixing exhaust system composed of external chevron nozzle with lobed mixer.The computational results indicate that comparing with the baseline nozzle with lobed mixer,the external chevron nozzle with lobed mixer increases mixing of jet and ambient air near the nozzle exit.The experimental results show that the external chevron nozzle with lobed mixer has better jet noise reduction at low frequencies,and this reduction rises with the increase of chevron bend angle.The experimental results also show that the external chevron nozzle with lobed mixer has sound pressure level(SPL)increase which is not obvious at high frequencies.With chevron bend angle increasing,SPL has relatively marked increase at 60°(directivity angle measured from upstream jet axis)and little fluctuations at 90°and 150°.The external chevron nozzle with lobed mixer has overall sound pressure level(OASPL)reduction in varying degrees at 60°and 150°,but it has little OASPL increase at 90°.

System analysis based on the T cell exhaustion‑related genes identifies CD38 as a novel therapy target for ovarian cancer

Ovarian cancer(OV)is highly heterogeneous tumor with a very poor prognosis.Studies increasingly show that T cell exhaustion is prognostically relevant in OV.The aim of this study was to dissect the heterogeneity of T cell subclusters in OV through single cell transcriptomic analysis.The single RNA-sequencing(scRNA-seq)data of five OV patients were analyzed,and six major cell clusters were identified after threshold screening.Further clustering of T cell-associated clusters revealed four subtypes.Pathways related to oxidative phosphorylation,G2M checkpoint,JAK-STAT and MAPK signaling were significantly activated,while the p53 pathway was inhibited in the CD8+exhausted T cells.The standard marker genes of CD8+T cell exhaustion were screened to develop a T-cell related gene score(TRS)based on random forest plots in TCGA cohort.The patients with low TRS have better prognosis compared to the patients with high TRS in both TCGA and GEO.In addition,most genes included in the TRS showed significant differences in expression levels between the high-and low-risk groups.Immune cell infiltration was analyzed using the MCPcounter and xCell algorithms,which revealed significant differences between the two risk groups,indicating that the different prognoses may stem from the respective immune landscapes.In addition,CD38 knockdown in OV cell lines increased apoptosis and inhibited invasion in vitro.Finally,we performed a drug sensitivity analysis and identified six potential drug candidates for OV.To summarize,we identified the heterogeneity and clinical significance of T cell exhaustion in OV and built a superior prognostic model based on T cell exhaustion genes,which can contribute to the development of more precise and effective therapies.

Revolutionizing tumor immunotherapy:unleashing the power of progenitor exhausted T cells

In exploring persistent infections and malignancies, a distinctive subgroup of CD8^(+) T cells, progenitor exhausted CD8^(+) T(Tpex) cells, has been identified. These Tpex cells are notable for their remarkable self-renewal and rapid proliferation abilities. Recent strides in immunotherapy have demonstrated that Tpex cells expand and differentiate into responsive exhausted CD8^(+) T cells, thus underscoring their critical role in the immunotherapeutic retort. Clinical examinations have further clarified a robust positive correlation between the proportional abundance of Tpex cells and enhanced clinical prognosis. Tpex cells have found noteworthy applications in the formulation of inventive immunotherapeutic approaches against tumors. This review describes the functions of Tpex cells in the tumor milieu, particularly their potential utility in tumor immunotherapy. Precisely directing Tpex cells may be essential to achieving successful outcomes in immunotherapy against tumors.

Infrared radiation simulation of exhaust system by coupling FVM with narrow band k-distribution

A three-dimensional infrared radiation code for exhaust system was developed by the finite volume method coupled with narrow band k-distribution in non-gray absorbing-emitting media.The final infrared signature had considered the atmosphere effect,and the simulation values were favorably consistent with testing ones.The results indicate that the relative errors considering the effect of atmosphere compared with that of the contrary condition reduce by 31%,it shows that when simulating the infrared radiation of the target which is received by the infrared detectors,even the calculation band is in atmospheric windows 3～5 μm,the effect of atmospheric transmission on infrared signature of the target should not be neglected.

Calculation of Wall Temperature for Aircraft Exhaust System with Considering Gas Radiation Heat Transfer

The coupled numerical simulation of flow field, solid temperature field, species concentration field and gas radiation transfer/ energy field based on statistical narrow-band correlated-k （SNBCK） model, is employed to accurately predict aerothermodynamic characteristic of aircraft exhaust system. A series of methods to increase computational efficiency and descend computational resources make it possible to finish the calculation in PC. The parameters of narrow-band model are evaluated by HITEMP line-by-line database. Three examples have proved the accuracy of using these methods to solve flow heat transfer coupled problem and radiation transfer/energy equation, which are the calculation of temperature distribution of water-cooling nozzle in rocket engine, the calculation of carbon dioxide absorptivity at 4.3 micron band, and the gas radiation heat transfer evaluation of the cylindrical furnace. Finally, the inner flaps temperature distribution of ejecting nozzle with floating outer flaps is computed, under high-altitude, high-speed and afterburning conditions. Two completely different air-inlet schemes of ejecting channel almost achieve the same effect in cooling inner flaps.

Techno-economic feasibility assessment of a diesel exhaust heat recovery system to preheat mine intake air in remote cold climate regions

Underground mines in Arctic and Subarctic regions require the preheating of mine intake air during winter.The cold fresh air of those remote areas can be as severe as
40℃ and commonly needs to be heated to around+3℃.This extensive amount of heating is usually provided by employing large-size air heaters,fueled by diesel,propane,natural gas,or heavy oil,leading to high energy costs and large carbon footprints.At the same time,the thermal energy content of a diesel generator sets(gen-sets)exhaust is known to be one-third of the total heating value of its combusted fuel.Exhaust heat recovery from diesel gen-sets is a growing technology that seeks to mitigate the energy costs by capturing and redirecting this commonly rejected exhaust heat to other applications such as space heating or pre-heating of the mine intake air.The present study investigated the possibility of employing a simple system based on off-theshelf heat exchanger technology,which can recover the waste heat from the exhaust of the power generation units(diesel gen-sets)in an off-grid,cold,remote mine in Canada for heating of the mine intake air.Data from a real mine was used for the analysis along with environmental data of three different location-scenarios with distinct climates.After developing a thermodynamic model,the heat savings were calculated,and an economic feasibility evaluation was performed.The proposed system was found highly viable with annual savings of up to C$6.7 million and capable enough to provide an average of around 75%of the heating demand for mine intake air,leading to a payback period of about eleven months or less for all scenarios.Deployment of seasonal thermal energy storage has also been recommended to mitigate the mismatch between supply and demand,mainly in summertime,possibly allowing the system to eliminate fuel costs for intake air heating.

ANALYTICAL SOLUTION OF FILLING AND EXHAUSTING PROCESS IN PNEUMATIC SYSTEM

The filling and exhausting processes in a pneumatic system are involved with many factors, and numerical solutions of many partial differential equations are always adapted in the study of those processes, which have been proved to be troublesome and less intuitive. Analytical solutions based on loss-less tube model and average friction tube model are found respectively by using fluid net theory, and they fit the experimental results well. The research work shows that： Fluid net theory can be used to solve the analytical solution of filling and exhausting processes of pneumatic system, and the result of loss-less tube model is close to that of average friction model, so loss-less tube model is recommended since it is simpler, and the difference between filling time and exhausting time is determined by initial and final pressures, the volume of container and the section area of tube, and has nothing to do with the length of the tube.

Exhaustive entropy based SLM method for PAPR reduction of OFDM system

Orthogonal frequency division multiplexing(OFDM) is an attractive technology to provide immense improvement in wireless transmission capacity but high peak-to-average power ratio(PAPR) is a major drawback of OFDM system.Selected mapping(SLM) scheme has good performance for PAPR reduction.It requires the transmitting data to be multiplied by random phase sequences.However,the sequences are pseudo-random which will decrease the method effectiveness.Exhaustive entropy is introduced in this paper which can identify the strength of random phase sequences property.Then an exhaustive entropy based on SLM method is proposed.The scheme improves the effectiveness of random phase sequences by selecting the larger exhaustive entropy of them.The simulation results show that the PAPR reduction performance is better than that of conventional SLM through this method.

The Efficiency Analysis of the Exhaust Air Heat Pump System

This paper is based on long term parameter measurements of the exhaust air heat pumps (EAHP) system in a new built apartment building. The building was equipped with an exhaust air ventilation system and exhaust air heat pump for ventilation heat recover. The results of the measurements show that the COP of the EAHP is mainly related to the temperature graph of the heating system and the supply temperature of domestic hot water (DWH). During the measurement period some other impact factors, such as the quality of maintenance, the nighttime temperature graph of the heating system, the reduction of the exhaust air flows in case of low temperatures, mistakes in designing and low building quality, have also played a role. An analysis of energy consumption shows that in winter conditions the COP is about 3.0 and in the transition period about 3.3. The energy recovery value of the EAHP is 0.5.

Optimization and Evaluation of a Vehicular Exhaust Heat Recovery System

Exhaust waste heat recovery system based on organic Rankine cycle(ORC)has been considered as an effective method to achieve energy conservation and emissions reduction of engine.The performance of adiesel engine with an on-board ORC exhaust heat recovery system was evaluated through simulations in this study.The combined system was optimized through controlling the exhaust gas mass flow rate entering the ORC system.The models of the engine with ORC system were developed in GT-suite and Simulink environment.The validation results showed high accuracy of the models.The performance of the system recovering heat from different exhaust gas mass flow rates was evaluated.The comparative analysis of the performance between the optimized and un-optimized system was also presented.The results indicated that the exhaust gas mass flow rate had significant effects on the system performance.Integration with the onboard ORC system could effectively improve the engine power performance.The power output of the engineORC combined system with optimization had further improvement,and the maximum improvement could reach up to 1.16 kW.

Fluid-Structure Coupled Analysis of the Transient Thermal Stress in an Exhaust Manifold

The development of thermal stress in the exhaust manifold of a gasoline engine is considered.The problem is addresses in the frame of a combined approach wherefluid and structure are coupled using the GT-POWER and STAR-CCM+software.First,the external characteristic curve of the engine is compared with a one-dimen-sional simulation model,then the parameters of the model are modified until the curve matches the available experimental values.GT-POWER is then used to transfer the inlet boundary data under transient conditions to STAR-CCM+in real-time.The temperature profiles of the inner and outer walls of the exhaust manifold are obtained in this way,together with the thermal stress and thermal deformation of the exhaust manifold itself.Using this information,the original model is improved through the addition of connections.Moreover,the local branch pipes are optimized,leading to significant improvements in terms of thermal stress and thermal deforma-tion of the exhaust manifold(a 7%reduction in the maximum thermal stress).

Numerical simulation of tritium behavior under a postulated accident condition for CFETR TEP system

China Fusion Engineering Test Reactor(CFETR)is China's self-designed and ongoing next-generation fusion reactor project.Tritium confinement systems in CFETR guarantee that the radiation level remains below the safety limit during tritium handling and operation in the fuel cycle system.Our tritium technology team is responsible for studying tritium transport behavior in the CFETR tritium safety confinement systems of the National Key R&D Program of China launched in 2017,and we are conducting CFETR tritium plant safety analysis by using CFD software.In this paper,the tritium migration and removal behavior were studied under a postulated accident condition for the Tokamak Exhaust Processing system of CFETR.The quantitative results of the transport behavior of tritium in the process room and glove box during the whole accident sequence(e.g.,tritium release,alarm,isolation,and tritium removal)have been presented.The results support the detailed design and engineering demonstration-related research of CFETR tritium plant.

Contrasting Regional Responses of Indian Summer Monsoon Rainfall to Exhausted Spring and Concurrently Emerging Summer El Nino Events

The inverse relationship between the warm phase of the El Nino Southern Oscillation(ENSO)and the Indian Summer Monsoon Rainfall(ISMR)is well established.Yet,some El Nino events that occur in the early months of the year(boreal spring)transform into a neutral phase before the start of summer,whereas others begin in the boreal summer and persist in a positive phase throughout the summer monsoon season.This study investigates the distinct influences of an exhausted spring El Nino(springtime)and emerging summer El Nino(summertime)on the regional variability of ISMR.The two ENSO categories were formulated based on the time of occurrence of positive SST anomalies over the Nino-3.4 region in the Pacific.The ISMR’s dynamical and thermodynamical responses to such events were investigated using standard metrics such as the Walker and Hadley circulations,vertically integrated moisture flux convergence(VIMFC),wind shear,and upper atmospheric circulation.The monsoon circulation features are remarkably different in response to the exhausted spring El Nino and emerging summer El Nino phases,which distinctly dictate regional rainfall variability.The dynamic and thermodynamic responses reveal that exhausted spring El Nino events favor excess monsoon rainfall over eastern peninsular India and deficit rainfall over the core monsoon regions of central India.In contrast,emerging summer El Nino events negatively impact the seasonal rainfall over the country,except for a few regions along the west coast and northeast India.

The Effects of Job Insecurity, Emotional Exhaustion, and Met Expectations on Hotel Employees’ Pro-Environmental Behaviors: Test of a Serial Mediation Model

There are a plethora of empirical pieces about employees’pro-environmental behaviors.However,the extant literature has either ignored or not fully examined various factors(e.g.,negative or positive non-green workplace factors)that might affect employees’pro-environmental behaviors.Realizing these voids,the present paper proposes and tests a serial mediation model that examines the interrelationships of job insecurity,emotional exhaustion,met expectations,and proactive pro-environmental behavior.We used data gathered from hotel customer-contact employees with a time lag of one week and their direct supervisors in China.After presenting support for the psychometric properties of the measures via confirmatory analysis in LISREL 8.30,the abovementioned linkages were gauged using the PROCESS plug-in for statistical package for social sciences.The findings delineated support for the hypothesized associations.Specifically,emotional exhaustion and met expectations partly mediated the effect of job insecurity on proactive pro-environmental behavior.More importantly,emotional exhaustion and met expectations serially mediated the influence of job insecurity on proactive pro-environmental behavior.These findings have important theoretical implications as well as significant implications for diminishing job insecurity,managing emotional exhaustion,increasing met expectations,and enhancing ecofriendly behaviors.

Effect of endurance training on the expression profile of circRNA-lncRNA-miRNA-mRNA in myocardial tissues of mice after exhaustive exercise

Objective:To clarify the effect of endurance training on the expression profile of circRNA-lncRNA-miRNA-mRNA in myocardial tissues of mice after exhaustive exercise.Methods:A total of 45 male C57BL/6 mice were randomly divided into control(C),low-strength endurance training(LSET)and high-strength endurance training(HSET)groups(n=15).The mice in the control group were not conducted to platform training.The mice in the LSET and HSET groups were conducted to platform training at 30%and 60%of exhaustive exercise once a day for 5 days a week,respectively.The exhaustion exercise was performed after 5 weeks of platform training.Total RNA was extracted from myocardial tissues,and the expression profile of circRNA-lncRNA-miRNA-mRNA in myocardial tissues was analyzed using Illimina transcriptome sequencing.Results:The distance and time of exhaustive exercise were longer in the LSET and HSET groups than in the control group,and the distance and time of exhaustive exercise were longer in the HSET group than in the LSET group(P<0.05).A total of 54 differentially expressed circRNAs(28 down-regulated and 26 up-regulated),7 differentially expressed lncRNAs(all down-regulated),3 differentially expressed miRNAs(1 down-regulated and 2 up-regulated)and 99 differentially expressed mRNAs(81 down-regulated and 18 up-regulated)were identified by transcriptome sequencing(P<0.05).Interaction network analysis revealed that ENSMUSG00000113041,MSTRG.79740,mmu-miR-374c-5p,18 down-regulated mRNAs and 3 up-regulated mRNAs formed a regulatory network.GO functional analysis revealed that the differentially expressed mRNAs were mainly enriched in primary metabolic processes and macromolecular synthesis and metabolic processes.KEGG pathway analysis revealed that the differentially expressed mRNAs were mainly enriched in complement and coagulation cascade pathways,estrogen signaling pathway and glucagon signaling pathway.Conclusion:Endurance training could alter the expression profile of circRNA-lncRNA-miRNA-mRNA in myocardial tissues of mice after exhaustive exercise,and these differentially expressed RNAs form a regulatory network that affects cardiomyocyte synthesis and metabolism and thus participates in the regulation of myocardial injury.