Comprehensive Evaluation of Distributed PV Grid-Connected Based on Combined Weighting Weights and TOPSIS-RSR Method

To effectively quantify the impact of distributed photovoltaic(PV)access on the distribution network,this paper proposes a comprehensive evaluation method of distributed PV grid connection combining subjective and objective combination of assignment and technique for order preference by similarity to an ideal solution(TOPSIS)—rank sum ratio(RSR)(TOPSIS-RSR)method.Based on the traditional distribution network evaluation system,a comprehensive evaluation system has been constructed.It fully considers the new development requirements of distributed PV access on the environmental friendliness and absorptive capacity of the distribution grid and comprehensively reflects the impact of distributed PV grid connection.The analytic hierarchy process(AHP)was used to determine the subjective weights of the primary indicators,and the Spearman consistency test was combined to determine the weights of the secondary indicators based on three objective assignment methods.The subjective and objective combination weights of each assessment indicator were calculated through the principle of minimum entropy.Calculate the distance between the indicators to be evaluated and the positive and negative ideal solutions,the relative closeness ranking,and qualitative binning by TOPSIS-RSR method to obtain the comprehensive evaluation results of different scenarios.By setting up different PV grid-connected scenarios and utilizing the IEEE33 node simulation algorithm,the correctness and effectiveness of the proposed subject-object combination assignment and integrated assessment method are verified.

Dynamic Modeling and Experimental Verification of an RPR Type Compliant Paralle Mechanism with Low Orders

Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The mechanism with two out-of-plane rotational and one lifting degrees of freedom(DoFs)plays an important role in posture adjustment.Based on elastic beam theory,the stiffness matrix and mass matrix of the beam element are established where the moment of inertia is considered.To improve solving efficiency,a dynamic model with low orders of the mechanism is established based on a modified modal synthesis method.Firstly,each branch of the RPR type mechanism is divided into a substructure.Subsequently,a set of hypothetical modes of each substructure is obtained based on the C-B method.Finally,dynamic equation of the whole mechanism is established by the substructure assembly.A dynamic experiment is conducted to verify the dynamic characteristics of the compliant mechanism.

Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

Identification and evaluation of shale oil micromigration and its petroleum geological significance

Taking the Lower Permian Fengcheng Formation shale in Mahu Sag of Junggar Basin,NW China,as an example,core observation,test analysis,geological analysis and numerical simulation were applied to identify the shale oil micro-migration phenomenon.The hydrocarbon micro-migration in shale oil was quantitatively evaluated and verified by a self-created hydrocarbon expulsion potential method,and the petroleum geological significance of shale oil micro-migration evaluation was determined.Results show that significant micro-migration can be recognized between the organic-rich lamina and organic-poor lamina.The organic-rich lamina has strong hydrocarbon generation ability.The heavy components of hydrocarbon preferentially retained by kerogen swelling or adsorption,while the light components of hydrocarbon were migrated and accumulated to the interbedded felsic or carbonate organic-poor laminae as free oil.About 69% of the Fengcheng Formation shale samples in Well MY1 exhibit hydrocarbon charging phenomenon,while 31% of those exhibit hydrocarbon expulsion phenomenon.The reliability of the micro-migration evaluation results was verified by combining the group components based on the geochromatography effect,two-dimension nuclear magnetic resonance analysis,and the geochemical behavior of inorganic manganese elements in the process of hydrocarbon migration.Micro-migration is a bridge connecting the hydrocarbon accumulation elements in shale formations,which reflects the whole process of shale oil generation,expulsion and accumulation,and controls the content and composition of shale oil.The identification and evaluation of shale oil micro-migration will provide new perspectives for dynamically differential enrichment mechanism of shale oil and establishing a“multi-peak model in oil generation”of shale.

Design and analysis of an advanced thermal management system for the solar close observations and proximity experiments spacecraft

In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.

Analysis of Landscape Vitality of Historical and Cultural Blocks Based on AHPFuzzy Comprehensive Evaluation Method:A Case Study of Daopashi Street in Anqing City

Historical and cultural blocks are witnesses of history and inheritors of culture. As one of the main spaces for outdoor interaction in historical and cultural blocks, the improvement of its vitality is of great significance for the improvement of residential environment and the better inheritance of history and culture. Taking Daopashi Street in Anqing City as an example, an evaluation model of landscape spatial vitality of historical and cultural blocks was constructed from three aspects of viewing function, store status and service facilities, and analytic hierarchy process was used to determine the index weight and vaguely evaluate the landscape spatial vitality of historical and cultural blocks. The results show that through the comparison of weight, architectural style(0.317), the practicability of service facilities(0.168) and plant landscape(0.165) had a significant impact on the landscape spatial vitality of historical and cultural blocks,and the landscape spatial vitality of historical and cultural blocks in Daopashi Street in Anqing City was at a good level.

Measurement and Evaluation of the Business Environment in Large and Medium-Sized Cities in China

The comprehensive development level of the business environment reflects the quality of a region’s economic development,and a good business environment will give a city a strong vitality.This paper uses the entropy method to measure and evaluate the business environment of 106 large and medium-sized cities in China from 2017 to 2021.The results show that:From the spatial point of view,the business environment index of China’s cities shows a gradually decreasing pattern from east to west and from south to north.The balance of the business environment of large and medium-sized cities in China is divided into four levels according to the standard deviation of the ranking of each subindex.The greater the standard deviation,the more unbalanced the overall development of the business environment in the region.Finally,this paper put forward countermeasures and suggestions to further optimize the business environment.

Application of Choquet Integral-Importance-Performance Analysis and TOPSIS Methods in Approaching the Preference Factors of Calligraphy and Seal Engraving Imagery

Classical Chinese characters,presented through calligraphy,seal engraving,or painting,can exhibit different aesthetics and essences of Chinese characters,making them the most important asset of the Chinese people.Calligraphy and seal engraving,as two closely related systems in traditional Chinese art,have developed through the ages.Due to changes in lifestyle and advancements in modern technology,their original functions of daily writing and verification have gradually diminished.Instead,they have increasingly played a significant role in commercial art.This study utilizes the Evaluation Grid Method(EGM)and the Analytic Hierarchy Process(AHP)to research the key preference factors in the application of calligraphy and seal engraving imagery.Different from the traditional 5-point equal interval semantic questionnaire,this study employs a non-equal interval semantic questionnaire with a golden ratio scale,distinguishing the importance ratio of adjacent semantic meanings and highlighting the weighted emphasis on visual aesthetics.Additionally,the study uses Importance-Performance Analysis(IPA)and Technique for Order Preference by Similarity to Ideal Solution(TOPSIS)to obtain the key preference sequence of calligraphy and seal engraving culture.Plus,the Choquet integral comprehensive evaluation is used as a reference for IPA comparison.It is hoped that this study can provide cultural imagery references and research methods,injecting further creativity into industrial design.

A robust method for performance evaluation of the vapor cell for magnetometry

A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core parameter of a magnetometer.After establishing the relationship between intrinsic sensitivity and the total relaxation rate,the total relaxation rate of the vapor cell can be obtained to represent the intrinsic sensitivity of the magnetometer by fitting the parameters of the magnetic resonance experiments.The method for measurement of the total relaxation rate based on the magnetic resonance experiment proposed in this work is robust and insensitive to ambient noise.Experiments show that,compared with conventional sensitivity measurement,the total relaxation rate affected by magnetic noise below 0.9 n T,pump light frequency noise below 1.5 GHz,pump light power noise below 9%,probe light power noise below 3%and temperature fluctuation of 150±3℃deviates by less than 2%from the noise-free situation.This robust performance evaluation method for vapor cells is conducive to the construction of a multi-channel high-spatial-resolution cardio-encephalography system.

Study on Evaluation Method of Failure Pressure for Pipeline with Axially Adjacent Defects

The interaction between axially adjacent defects is more significant than that between circumferentially aligned defects.However,the existing failure pressure assessment methods cannot accurately predict the failure pressure of axial adjacent defects.In the paper,the finite element model is adopted to analyze the influence of defect size,distribution mode and spacing between adjacent defects on failure pressure.A new failure pressure evaluation method is proposed by establishing the effective depth calculation model of corrosion colony with different distribution model.The burst test of X52 pipeline is carried out to verify the applicability of the method.It shows that the results of new method are consistent with the test results of pipeline with various defects and steel grades.

Comprehensive Evaluation of New Maize Varieties for Grain and Fodder Based on Membership Function Method

To screen new maize(Zea mays L.)varieties suitable for food and fodder dual-purpose in Du'an Yao Autonomous County of Guangxi,the agronomic characters,yield and quality indexes of 12 new maize varieties were measured,and the correlation between various indexes were analyzed,and the comprehensive performance of tested varieties was evaluated by membership function method.The results showed that Guidan 671 had the highest grain yield and whole-plant biomass at 10908 and 49965 kg/hm^(2),respectively,and the second was Zhaoyu 215 with a grain yield and whole-plant biomass of 10086 and 47175 kg/hm^(2),respectively.Grain yield was highly significantly positively correlated with ear diameter and 100-grain weight(P<0.01),and significantly correlated with whole-plant biomass,starch content,ear length and grain number per row(P<0.05);and the whole-plant biomass was highly significantly correlated with the number of grains per row(P<0.01),and significantly correlated with starch content,panicle length,plant height and panicle height(P<0.05).The comprehensive performance scores of the tested varieties from high to low were Guidan 671,Zhaoyu 215,Guidan 669,Guidan 6208,Guidan 666,Guidan 6205,Guidan 660,Guidan 6203,Guidan 6206,Guidan 162,Guidan 668 and Guidan 673.According to the values of membership function and combined with various indexes,Guidan 671 and Zhaoyu 215 had good comprehensive performance,and could be used as the first choice for food and fodder dual-purpose maize varieties in Du'an Yao Autonomous County.

Validity and reliability of the evaluation tool of TCM confidence in students with TCM learning experience

Objective:This study aimed to design an evaluation scale of traditional Chinese medicine(TCM)confidence and then evaluate its validity and reliability.Methods:Three parallel samples with TCM learning experience were included in this current study.Randomly selected 500 nursing students were included factor analysis and reliability and validity analyses.After 4 weeks,200 nursing students were recruited to retest the reliability.The evaluation tool of TCM confidence included 6 dimensions and 25 entries.Results:Cronbach's a coefficient of the evaluation scale was 0.95 and that of the 6 observed aspects were higher than 0.90,and splithalf reliability was 0.81.For the retest reliability,Cronbach's a coefficient of the evaluation scale was 0.93 and that of the 6 examined aspects was all over 0.80.The index of content validity Scale Content Validity Index(S-CVI)was 0.92 and Item Content Validity Index(I-CVI)was 0.83–1.00.Conclusions:Observed results may indicate that the designed tool can be used to assess the TCM confidence level of students with TCM studied experience and also can evaluate results of TCM education during studying TCM lectures.

A framework for equipment systems-of-systems effectiveness evaluation using parallel experiments approach

Equipment systems-of-systems （SOS） effectiveness evaluation can provide important reference for construction and optimization of the equipment SoS. After discussing the basic theory and methods of parallel experiments, we depict an SoS effectiveness analysis and evaluation method using parallel expe- riments theory in detail. A case study is carried out which takes the missile defense system as an example. An artificial system of the missile defense system is constructed with the multi-agent modeling method. Then, single factor, multiple factors and defense position deployment computational experiments are carried out and evaluated with the statistical analysis method. Experiment re- sults show that the altitude of the secondary interception missile is not the key factor which affects SoS effectiveness and putting the defense position ahead will increase defense effectiveness. The case study demonstrates the feasibility of the proposed method.

Studyon Evaluation Methods for Lateral Stability of High-Speed Trains

Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis method and the field testing criterion are studied to evaluate stability of high-speed trains.A new stability evaluation method is proposed which can be used to evaluate lateral stability of high-speed vehicle based on the codes of UIC 515and UIC 518.From the viewpoint of taking the most unfavorable track conditions into account and improving the safety margin,the new method uses the root mean square of bogie lateral acceleration as a criterion to evaluate the lateral stability of high-speed trains.Numerical example shows that the proposed method not only considers the forced vibration caused by track irregularities in the actual practice,but also takes the instability self-excited vibration into account,so it can realize early warning of bogie slight unstable oscillation,meanwhile the method itself does not involve complex algorithms which has the possibility of engineering applications.

Exploring Taiwan’s China Landscape Painting Aesthetic Preferences Through Evaluation Grid Method and the Continuous Fuzzy Kano Model

The primary objective of this study is to apply the Evaluation Grid Method(EGM)and the continuous fuzzy Kano quality model to explore the cognitive preferences of Taiwan China residents regarding the beauty of Taiwan’s China landscape paintings.The aim is to contribute to the development of social and cultural art and promote the widespread appeal of art products.Through a literature review,consultations with aesthetic experts,and the application of Miryoku Engineering’s EGM,this paper consolidates the factors that contribute to the attractiveness of painting art products among Taiwan China residents,taking into account various aesthetic qualities.Simultaneously,the paper introduces the use of the triangular fuzzy golden ratio scale semantics,specifically the equal-ratio aesthetic scale semantics,as a replacement for the traditional subjective consciousness model.Departing from the traditional discrete Kano model that employs the mode as the standard for evaluating quality,this study applies triangular fuzzy numbers to the continuous Kano quality model to analyze the diverse preferences and evaluation standards of the public.The hope is that this research methodology will not only deepen Taiwan China residents’understanding and aesthetic literacy of painting art but also serve as a reference for the popularization of art products.

A Review on Evaluation Methods of Climate Modeling

There is scientific progress in the evaluation methods of recent Earth system models(ESMs).Methods range from single variable to multi-variables,multi-processes,multi-phenomena quantitative evaluations in five layers(spheres)of the Earth system,from climatic mean assessment to climate change(such as trends,periodicity,interdecadal variability),extreme values,abnormal characters and quantitative evaluations of phenomena,from qualitative assessment to quantitative calculation of reliability and uncertainty for model simulations.Researchers started considering independence and similarity between models in multi-model use,as well as the quantitative evaluation of climate prediction and projection efect and the quantitative uncertainty contribution analysis.In this manuscript,the simulations and projections by both CMIP5 and CMIP3 that have been published after 2007 are reviewed and summarized.

Modeling and Experimental Analysis of Roughness Effect on Ultrasonic Nondestructive Evaluation of Micro-crack

A high-precision evaluation of ultrasonic detection sensitivity for a micro-crack can be restricted by a corroded rough surface when the surface microtopography is of the same order of magnitude as the crack depth.In this study,a back-surface micro-crack is considered as a research target.A roughness-modified ultrasonic testing model for micro-cracks is established based on a multi-Gaussian beam model and the principle of phase-screen approximation.The echo signals of micro-cracks and noises corresponding to different rough front surfaces and rough back surfaces are obtained based on a reference reflector signal acquired from a two-dimensional simulation model.Further compari-son between the analytical and numerical models shows that the responses of micro-cracks under the effects of dif-ferent corroded rough surfaces can be accurately predicted.The numerical and analytical results show that the echo signal amplitude of the micro-crack decreases significantly with an increase in roughness,whereas the noise ampli-tude slightly increases.Moreover,the effect of the rough front surface on the echo signal of the micro-crack is greater than that of the rough back surface.When the root-mean-square(RMS)height of the surface microtopography is less than 15μm,the two rough surfaces have less influence on the echo signals detected by a focused transducer with a frequency of 5 MHz and diameter of 6 mm.A method for predicting and evaluating the detection accuracy of micro-cracks under different rough surfaces is proposed by combining the theoretical model and a finite element simulation.Then,a series of rough surface samples containing different micro-cracks are fabricated to experimentally validate the evaluation method.