The Experimental Results of Pb and Zn Partitioning between Fluid and Melt, and Their Application to the Research on Metallogeny

Three logarithmic linear equations between D_(Me)^(V/L) and [m_(NaCl)], and the relationship of D_(Me)^(V/L) versus F/Cl or K/Na mole ratios have been established by the experiments of the partitioning of Pb and Zn between granitic silicate melt and aqueous fluid. These results have been used to quantitatively study some essential problems, such as the possibility and degree of Pb-Zn mineralization in the system of granitic magma and hydrothermal fluid, and the influence of the relative contents of alkali and volatiles on the Pb-Zn mineralization in the same system. Some new points have been put forward in this paper.

A METHOD OF ESTIMATING THE INFLUENCE OF EXPERIMENTAL ERRORS ON THE EXPERIMENTAL RESULTS OF MATERIAL PARAMETERS AND THE CRITERIA TO VALUE THIS INFLUENCE

In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because of the inaccuracy of experimental equipment, the experimental techniques, etc., and the form of the scatter caused by this source is called external distribution. The other is due to the irregularity and inhomogeneity of the material structure and the randomness of deformation process. The scatter caused by this source is inherent and then this form of the scatter is called internal distribution. Obviously the experimental distribution of material parameters combines these two distributions in some way; therefore, it is a sum distribution of the external distribution and the internal distribution. In view of this , a general method used to analyse the influence of the experimental errors on the experimental results is presented, and three criteria used to value this influence are defined. An example in which the fracture toughness KIC is analysed shows that this method is reasonable, convenient and effective.

THE EXPERIMENTAL RESULTS OF 2-D FREE SHEAR TURBULENT FLOWS AND THE COMPARISON WITH THE THEORETICAL COMPUTATION

An extensive set of measurements in 2-D turbulent mixing layer, wake and jet flow by the hot-wire technique and data sampling are presented. The measured quantities, i. e. the mean velocity, the turbulence intensity, the Reynolds stress and higher-order correlations of the fluctuating velocity in the self-preserving region of the above free shear flows are compared with the computational results based on Zhou's theory for the shear turbulence of in- compressible fluid. The experimental and computational results are in good agreement.

Experimental Studies of the Doppler Effect

Recent experimental results of the Doppler effect formula verification are reported. The moving emitters are hydrogen atoms in the excited state. The results of the work corroborate the classical not the relativistic,formula for the Doppler effect.

Overview of HL-2A Experiment Results

The recent experiment results of the HL-2A tokamak are presented in this paper. Up to now, the stable and reproducible discharges with divertor configuration have been obtained under the main plasma parameters of Ip=433 kA, BT=2.70 T, ne-6.0×10^19 m^-3 and the discharge duration -3.0 s, using the reliable feedback control. Siliconization is the normal wall conditioning method on HL-2A. The impurity concentration and radiated power can be obviously suppressed after siliconization. Advanced scenario with weak positive/negative current shear, calculated by TRANSP codes using experimental data, is achieved by the central fuelling of the pellet injection. The supersonic molecular beam injection （SMBI） with liquid nitrogen temperature gas is used. It is proved that the low temperature SMBI can form the hydrogen cluster and penetrate into plasma more deeply and efficiently. The particle diffusion coefficient is obtained as 0.5 - 1.5 m^2/s at plasma peripheral area. The symmetries （m = 0- 1, n = 0） of the directly measured low frequency （7 -9 kHz ） electric potential and field are simultaneously observed for the first time by a novel designed Langmuir probe system. The impurity diffusion coefficient and convection velocity are determined by using laser blow-off system and transport code. In disruption studies, a new criterion for disruption prediction is given according to the MHD activity features and statistic analysis, and the plasma current quench time increases from about 5 ms to 20 ms with noble gas injection. The sawtooth character in on-axis ECRH experiment is investigated, and a persistent m= 1 oscillation induced by SMBI and pellet injection is found to be a thermal fluctuation instead of magnetic island. The detachment characteristics of HL-2A divertor are numerically and experimentally studied using code SOLPS5.0 and measured data. The long divertor legs and thin divertor throats in HL-2A pose MHD shaping problems resulting in momentum losses even at low densities and strongly enhanced main chamber losses.

Visual Object Tracking Based on Modified LeNet-5 and RCCF

The field of object tracking has recently made significant progress.Particularly,the performance results in both deep learning and correlation filters,based trackers achieved effective tracking performance.Moreover,there are still some difficulties with object tracking for example illumination and deformation(DEF).The precision and accuracy of tracking algorithms suffer from the effects of such occurrences.For this situation,finding a solution is important.This research proposes a new tracking algorithm to handle this problem.The features are extracted by using Modified LeNet-5,and the precision and accuracy are improved by developing the Real-Time Cross-modality Correlation Filtering method(RCCF).In Modified LeNet-5,the visual tracking performance is improved by adjusting the number and size of the convolution kernels in the pooling and convolution layers.The high-level,middle-level,and handcraft features are extracted from the modified LeNet-5 network.The handcraft features are used to determine the specific location of the target because the handcraft features contain more spatial information regarding the visual object.The LeNet features are more suitable for a target appearance change in object tracking.Extensive experiments were conducted by the Object Tracking Benchmarking(OTB)databases like OTB50 and OTB100.The experimental results reveal that the proposed tracker outperforms other state-of-the-art trackers under different problems.The experimental simulation is carried out in python.The overall success rate and precision of the proposed algorithm are 93.8%and 92.5%.The average running frame rate reaches 42 frames per second,which can meet the real-time requirements.

Event-triggered leader-following formation control for multi-agent systems under communication faults: application to a fleet of unmanned aerial vehicles

The main contribution of this paper is the design of an event-triggered formation control for leader-following consensus in second-order multi-agent systems(MASs)under communication faults.All the agents must follow the trajectories of a virtual leader despite communication faults considered as smooth time-varying delays dependent on the distance between the agents.Linear matrix inequalities(LMIs)-based conditions are obtained to synthesize a controller gain that guarantees stability of the synchronization error.Based on the closed-loop system,an event-triggered mechanism is designed to reduce the control law update and information exchange in order to reduce energy consumption.The proposed approach is implemented in a real platform of a fleet of unmanned aerial vehicles(UAVs)under communication faults.A comparison between a state-of-the-art technique and the proposed technique has been provided,demonstrating the performance improvement brought by the proposed approach.

A 2450 MHz/2 MW Lower Hybrid Current Drive System for EAST

A 2 MW-2.45 GHz lower hybrid current drive （LHCD） system was designed, fab- ricated and installed successfully on EAST in 2008 to investigate high performance regimes and achieve a steady-state operation. The system is composed of 20 continuous wave （CW） klystron amplifiers, 4 sets of high voltage power supply, 20 standard rectangle waveguide （American National Standard, WR430） transmission lines with a length of 30 m to 40 m for each, and a multijunction grill containing 160 active （in groups of 8） and 25 passive sub-waveguides arranged in 5 rows and 4 columns. Fixed phase shifters in sub-waveguides and electronically-controlled digital phase shifters driving each klystron are used to control the radiated power spectrum of the grill. By means of LHCD, a plasma current of 150 kA to 500 kA at a central plasma density of 1×10^13 cm^-3 to 2×10^13 cm^-3 and a toroidal magnetic field of 2.0 T to 2.5 T was achieved. Both a fully non-inductive plasma current of 250 kA lasting up to 23 s and the ramp up were achieved. These results successfully demonstrated the capability of the LHCD system. The system is described in detail and the primaryexperimental results are presented.

Large deflection of flexible tapered functionally graded beam

In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.

Prevention and Treatment Test of Piglet Diarrhea

[Objective] The paper was to observe the clinical effects of compound Chinese traditional preparation Shenwudi oral liquid on prevention and treatment of piglet diarrhea, and to explore the diarrhea prevention and growth promotion effect of Shenwudi power on weaned piglets as the medical feed additive. [Method] Diarrhea piglets were randomly grouped, and the clinical prevention and treatment effects of Shenwudi oral liquid were observed. Meantime, the effects of Huangzhi oral liquid and levofloxacin mesylate and sodium chloride injection were determined and compared with that of Shenwudi oral liquid. Shenwudi powder was added into the specific feed of weaned piglets at the dose of 5 g/kg, to observe its diarrhea prevention and growth promotion effect on weaned piglets. Compound amoxicillin powder was added in drug control group at the dose of 0.3 g/kg; no drug was added in blank control group. [Result] The cure rate of sucking piglets by Shenwudi oral liquid was 88.57%, and its protection rate was 100%; the cure rate of weaned piglets by Shenwudi oral liquid was 90.00%, and the total effective rate was 95.00%; the protection rate of weaned piglet diarrhea by Shenwudi powder mixing feed was 100%, and the average daily feed intake on the 42^（nd） day was extremely higher than the blank control group（P〈0.01）. [Conclusion] Shenwudi oral liquid can be used for prevention and treatment of sucking piglet diarrhea.Meantime, Shenwudi mixing feed has good prevention effect and significant growth promotion effect on weaned piglet diarrhea.

Performance of an Adaptive Optics System with Dual Deformable Mirrors

One deformable mirror （DM） in conventional adaptive optics system can not meet the needs of large scale and high order aberration compensation. In this paper, a dual DMs way is presented, which needs the decoupling of dual DMs. In dual DMs adaptive optics （AO） system, the decoupling algorithm of dual DMs is deduced. Stroke of one of DMs is large, spatial frequency of the other is high. According to the algorithm, the large stroke DM （LSDM） corrects low order aberration only, and the high spatial frequency DM （HSFDM） corrects other aberration. The experimental result for two 61-DM AO system is presented. The result indicates that the experimental performance of dual DMs AO system is almost the same with that of the conventional AO system using single DM with ideal stroke and equivalent spatial frequency.

A Comparative Study on Two Techniques of Reducing the Dimension of Text Feature Space

With the development of large scale text processing, the dimension of text feature space has become larger and larger, which has added a lot of difficulties to natural language processing. How to reduce the dimension has become a practical problem in the field. Here we present two clustering methods, i.e. concept association and concept abstract, to achieve the goal. The first refers to the keyword clustering based on the co occurrence of

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

In recent years, an emerging technology termed high-strength concrete （HSC） has become popular in construction industry. Present study describes an experimental research on the behavior of high-strength concrete beams in ultimate and service state. Six simply supported beams were tested, by applying comprising two symmetric concentrated loads. Tests are reported in this study on the flexural behavior of high-strength reinforced concrete （HSRC） beams made with coarse and fine aggregate together with Microsilica. Test parameter considered includes effect of being compressive reinforcement. Based on the obtained results, the behavior of such members is more deeply reviewed. Also a comparison between theoretical and experimental results is reported here. The beams were made from concrete having compressive strength of 66.81-77.72 N/mm2 and percentage reinforcement ratio （P/Pb） in the range of 0.56% - 1.20%. The ultimate moment for the tested beams was found to be in a good agreement with that of the predicted ultimate moment based on ACI 318-11, ACI 363 and C SA-04 provisions. The predicted deflection based classical formulation based on code provisions for serviceability requirements is found to underestimate the maximum deflection of HSC reinforced beams at service load.

Modal Decomposition for the Analysis of the Rotor-stator Interactions in Multi-stage Compressors

A modal analysis method of the rotor-stator interactions in multistage compressors has been developed by LMFA. This method, based on a double modal decomposition of the flow over space and time, has been applied to nu- merical and experimental results of the high-speed 3Y2-stage compressor CREATE based at LMFA, Lyon-France. It reveals the presence of a very strong rotor-stator interaction which completely drives the flow at casing behind all the rotors. This modal analysis method applied to an unsteady RANS simulation permits to calculate the en- ergy of the rotor-stator interactions and to plot energetic meridian maps to explain experimental results and to analyze the interaction in the whole machine.

A novel compensation method for polygonized mesa structures on(100) silicon substrate

A theoretical compensation method for polygonized mesa structures on（100） silicon substrate during the anisotropic etching process has been developed,which contains four stages as follows：prepare the information of the etching condition;predict the structure＇s undercutting profile;construct the topological structure of compensation patterns; and generate practical compensation patterns from the topological structure.The reasoning process is clearly stated,and detailed steps for the undercutting prediction and topological structure construction are summarized.Conclusions are also drawn about the rules which must be obeyed during the pattern generation process.The simulation and experimental results of some polygon structures are finally given to prove this method＇s validity and reliability.

Mass transfer mechanisms in fixed-bed adsorption of erythromycin

The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.