Effects of Fatigue Characteristics on Static and Dynamic Performance of Eucommia Rubber Isolators

This study aimed to investigate the effect of fatigue characteristics on the static and dynamic performance of Eucommia ulmoides gum isolators, and to explore the performance changes of Eucommia ulmoides gum isolators with different formulations. For this purpose, we used five formulations of Eucommia ulmoides gum isolators and set different fatigue test methods to study the static and dynamic performance changes of Eucommia ulmoides gum isolators with different formulations by changing the amplitude. The experimental results showed that the addition of Eucommia ulmoides gum had an impact on the performance of the isolator, and the number of fatigue cycles would lead to the hardening of the Eucommia ulmoides gum isolator and changes in its static and dynamic performance. In the range of two million vibrations, the performance change of the isolator was significant in the early stage and then tended to be flat, indicating that the impact of fatigue on the performance of the isolator would not continue to persist. It is worth noting that the study found that the addition of 30% Eucommia ulmoides gum had the least impact on the performance of the isolator under fatigue. Therefore, for long-term use of Eucommia ulmoides gum isolators, attention should be paid to their fatigue characteristics to ensure their stability and reliability. Additionally, this study provides a reference for the design and application of Eucommia ulmoides gum isolators. In summary, this study provides important reference value for a deeper understanding of the fatigue characteristics of Eucommia ulmoides gum isolators and for ensuring their stable and reliable performance. .

Theoretical Analysis and Numerical Simulation of the Static and Dynamic Characteristics of Hydrostatic Guides Based on Progressive Mengen Flow Controller

The oil film thickness of oil hydrostatic guide with constant pressure supply based on capillary restrictor is greatly affected by load, and this kind of hydrostatic guide is usually applied to the machine tools with moderate load. The static and dynamic characteristics of the guide have been studied by using some theoretical, numerical and experimental approaches, and some methods and measures have been proposed to improve its performances. The hydrostatic guide based on progressive mengen（PM） flow controller is especially suitable for the heavy numerical control（NC） machine tools. However, few literatures about the research on the static and dynamic characteristics of the hydrostatic guides based on PM flow controller are reported. In this paper, the formulae are derived for analyzing the static and dynamic characteristics of hydrostatic guides with rectangle pockets and PM flow controller according to the theory of hydrostatic bearing. On the basis of the analysis of hydrostatic bearing with circular pocket, some equations are derived for solving the static pressure, volume pressure and squeezing pressure which influence the dynamic characteristics of hydrostatic guides with rectangle pocket. The function and the influencing factors of three pressures are clarified. The formulae of amplitude-frequency characteristics and dynamic stiffness of the hydrostatic guide system are derived. With the help of software MATLAB, programs are coded with C＋＋ language to simulate numerically the static and dynamic characteristics of the hydrostatic guide based on PM flow controller. The simulation results indicate that the sensitive oil volume between the outlet of the PM flow controller and the guide pocket has the greatest influence on the characteristics of the guide, and it should be reduced as small as possible when the field working condition is met. Choosing the oil with a greater viscosity is also helpful in improving the dynamic performance of hydrostatic guides. The research work has instructing significance for analyzing and designing the guide with PM flow controller.

Nonlinear Static and Dynamic Stiffness Characteristics of Support Hydraulic System of TBM

Full-face hard rock tunnel boring machines(TBM)are essential equipment in highway and railway tunnel engineering construction.During the tunneling process,TBM have serious vibrations,which can damage some of its key components.The support system,an important part of TBM,is one path through which vibrational energy from the cutter head is transmitted.To reduce the vibration of support systems of TBM during the excavation process,based on the structural features of the support hydraulic system,a nonlinear dynamical model of support hydraulic systems of TBM is established.The influences of the component structure parameters and operating conditions parameters on the stiffness characteristics of the support hydraulic system are analyzed.The analysis results indicate that the static stiffness of the support hydraulic system consists of an increase stage,stable stage and decrease stage.The static stiffness value increases with an increase in the clearances.The pre-compression length of the spring in the relief valve a ects the range of the stable stage of the static stiffness,and it does not a ect the static stiffness value.The dynamic stiffness of the support hydraulic system consists of a U-shape and reverse U-shape.The bottom value of the U-shape increases with the amplitude and frequency of the external force acting on the cylinder body,however,the top value of the reverse U-shape remains constant.This study instructs how to design the support hydraulic system of TBM.

Lateral static and dynamic characteristics of thin-walled box girder

To analyze the static and dynamic behaviors of the thin-walled box girder in its lateral webs in consideration of shear lag effect and shear deformation, an approach based on the minimum potential principle is introduced in this paper. Both static and dynamic response equations as well as the corresponding natural boundary conditions of the box girder are deduced. Meanwhile, three generalized displacement functions： w （x） , U（x） and O（x） are employed and their differences in the calculus of variation are quantitatively investigated. The comparison of finite shell element results with analytical results of calculation examples validates the feasibility of the proposed approach.

Dynamic impact experiment and response characteristics analysis for 1:2 reduced-scale model of hydraulic support

It is significant to research the impact resistance properties of hydraulic support due to its key support role in the fully mechanized mining face.However,it is difficult for the entire hydraulic support to implement the impact experiment underground and analyze the response characteristic.Therefore,a dynamic impact experiment for the entire hydraulic support was proposed in this paper,where a 1:2 reducedscale model of hydraulic support was designed and its response characteristics under dynamic impact load were analyzed.Firstly,a comprehensive monitoring scheme was proposed to achieve an effective monitoring for dynamic response of hydraulic support.Secondly,a multi-scale impact experiment was carried out for the entire hydraulic support and dynamic behaviors of hydraulic support under the multi-scale impact load were revealed by experimental data.Then a dynamic impact experiment of the entire hydraulic support was simulated in ADAMS with the same experiment conditions,and the experimental and simulation data were verified mutually.Finally,the characteristics of energy conversion and dissipation of the entire experiment system after impact were analyzed.The experiment results showed that the impact resistance properties of hydraulic support largely depended on the initial support conditions and different vertical rigidities affected energy distribution proportion of the entire support system.

Static and Dynamic Characterization of High-Speed Silicon Carbide (SiC) Power Transistors

This paper describes the operating characteristics of NPN 4H-SiC (a polytype of silicon carbide) bipolar junction transistor (BJT) and 4H-SiC Darlington Pairs. A large amount of experimental data was collected. The wafer BJTs were able to block over the rated 600 V in the common-emitter configuration and the TO-220 BJTs were able to block over the 1200 V rated voltage. In the thermal analysis, it is found out that at higher temperatures the forward and reverse (blocking) characteristics were stable at 100°C and 200°C. The transistors show positive temperature coefficients of forward voltage (Vf). In general the current gain (β) characteristics obtained (with VCE = 6 V) were approximately as expected for the BJTs. The β‘s were very low (2 to 5 for wafer BJTs, 5 to 20 for the wafer Darlington Pairs, and 5 to 30 for TO-220 BJTs). The large amount of experimental data collected confirms some of the superior properties of the Silicon carbide material when used to fabricate power semiconductor devices, namely high thermal conductivity and high temperature operability. The data presented here will establish the trends and the performance of silicon carbide devices. The silicon carbide BJT has fast switching and recovery characteristics. From the analysis, silicon carbide power devices will be smaller (about 20 times) than a similar silicon power device and with reduced power losses. Silicon carbide will also be very useful for device integration in high densities, as found in integrated chips for current handling capabilities, for applications in instrumentation and measurements. Presently, most of the research is on improving the basic silicon carbide material quality, power device optimization, and applications engineering using devices that have been developed to date.

Structural Design and Dynamic Characteristics of Overloaded Horizontal Servo Cylinder for Resisting Dynamic Partial Load

When an output curve force is applied to a horizontal servo cylinder with a heavy load, the piston rod bears a dynamic partial load based on the installation and load characteristics, which significantly a ects the frequency response and control accuracy of the servo cylinder. Based on this partial load, increased friction can lead to cylinder bore scu ng, leakage, lack of output power, or even system failure. In this paper, a novel asymmetric static-pressure support structure is proposed based on the principle of hydrostatic support. The radial component force of a dynamic partial load is balanced by cooperation between the support oil cushion of the variable hydraulic pressure support structure, oil cushion of the supportive force, and the damper. Adaptive control of the servo cylinder piston rod, guide sleeve, and piston, as well as the cylinder oil film friction between lubricated surfaces is achieved. In this paper, theoretical design and analysis of the traditional hydrostatic bearing structure and novel structure are presented. A hydraulic dynamic shear scissor is used as a research target to derive a structural dynamic model. Comparative simulations are performed using Matlab Simulink. Additionally, flow field analysis of the novel structure is performed, which verifies the rationality and feasibility of the proposed structure and system.

Dynamic characteristics of conveyor belts

The dynamic characteristics of a belt conveyor are determined to a large extent by the properties of the belt. This paper describes experiments designed to establish the dynamic properties of belting material. The dynamic elastic modulus, viscous damping and rheologicat constants of the belt were measured. Several properties were studied as a function of the tensile loading on the belt. These included longitudinal vibration, the natural vibration frequency in the transverse direction and the response to an impulse excitation. Vibration response was observed under several different excitation frequencies. Most of these properties have not been tested previously under conditions appropriate for the ISO/DP9856 standard. Two types of belt were tested, a steel reinforced belt and a fabric reinforced belt. The test equipment was built to provide data appropriate for designing belt conveyors. It was observed that the stress wave propagation speed increased with tensile load and that tensile load was the main factor influencing longitudinal vibrations.

Research on electromagnetic relay's dynamic characteristics disturbed by uniform static magnetic field

Electromagnetic relay is a widely used apparatus which usually works in a magnetic disturbance environment. To evaluate its electromagnetic compatibility (EMC) in a static magnetic field, dynamic characteristics of a clapper relay in a uniform static magnetic field situation based on the finite element method (FEM) is studied. Influences of the magnetic field on dynamic parameters (delay time, pick-up time, end pressure, and final velocity) as well as a situation in which the relay cannot function normally are analyzed. Simulation reveals that the external magnetic field which weakens the relay’s air-gap field has a greater influence on the relay’s dynamic parameters than the one strengthening the field. The validity of the simulation is verified by measured results of coil current and armature displacement.

Dynamic Characteristics Analysis on Wind-Blown Sand Ground under Dynamic Compaction Vibration

In the 6000 kN·m energy level dynamic compaction on Inner Mongolia wind-blown sand foundation treatment process, the dynamic characteristics and dynamic response are measured. Vibration action time, vibration main frequency, peak acceleration and peak velocity are analyzed. The vibration acting time is very short, the vertical average vibration acting time increases obviously with distance increasing, and the horizontal average vibration time does hardly change. The main frequency of vibration is at 4.60 - 24.90 Hz, which depends on the soil properties and soil layer distribution. The peak acceleration and peak velocity space distribution are similar. The maximum of horizontal acceleration peak is close to vertical velocity peak, and is near to 51 g under rammer. The maximum of horizontal velocity peak is close to vertical velocity peak, and is near to 54 m/s under rammer. The peak acceleration and velocity are rapidly attenuated, but the vertical peak acceleration and peak velocity are slowly attenuated than horizontal direction. The effective treating depth arrives 13 m for wind-blown wind, peak acceleration is 1.8 g or so, and peak velocity is 2.1 m/s or so. Horizontal treating range is 2.6 times of rammer diameter, and vertical treating range is 5.65 times of rammer diameter.

Numerical experiment rock fragmentation by combined dynamic and static loads under dual-cutter head

This paper puts forward a new rock fragmentation loading method of dual-cutter head combined dynamic and static loads. By applying the numerical simulation software - RFPA2D, we have done numerical experiment about the sihstone＇ s crushing effect by dynamic load on single cutter head without confining pressure, dynamic load on single cut- ter head with confining pressure 10 MPa and different dual-cutter heads spacing by combined dynamic and static loads with confining pressure 10 MPa. Experimental results show that the confining pressure can obviously affect the rock frag- mentation effect. Combined dynamic and static loads can greatly improve the rock fragmentation effect. There exists an optimal spacing of dual-cutter head that can make the rock fragmentation achieve the desired effect. Through analyzing the acoustic emission accumulative energy and quantity, the authors make a conclusion that the optimum spacing is 30 mm.

High-temperature characteristics of SiC module and 100 kW SiC AC–DC converter at a junction temperature of 180 ℃

High-temperature,high-power converters have gained importance in industrial applications given their ability to operate in adverse environments,such as in petroleum exploration,multi-electric aircrafts,and electric vehicles.SiC metaloxide-semiconductor field-effect transistor(MOSFET),a new,wide bandgap,high-temperature device,is the key component of these converters.In this study,the static and dynamic characteristics of the SiC MOSFET,half-bridge module,are investigated at the junction temperature of 180℃.A simplified experimental method is then proposed pertaining to the power operation of the SiC module at 180℃.This method is based on the use of a thermal resistance test platform and is proven convenient for the study of heat dissipation characteristics.The high-temperature characteristics of the module are verified based on the conducted experiments.Accordingly,a 100 kW high-temperature converter is built,and the test results show that the SiC converter can operate at a junction temperature of 180℃in a stable manner in compliance with the requirements of high-temperature,high-power applications.

Relevance of zero lift drag coefficient and lift coefficient to Mach number for large aspect ratio winged rigid body

Synthetic analysis is conducted to the wind tunnel experiment results of zero lift drag coefficient and lift coefficient for large aspect ratio winged rigid body.By means of wind tunnel experiment data,the dynamics model of the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body is amended.The research indicates that the change trends of zero lift drag coefficient and lift coefficient to Mach number are similar.The calculation result and wind tunnel experiment data all verify the validity of the amended dynamics model by which to estimate the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body,and thus providing some technical reference to aerodynamics character analysis of the same types of winged rigid body.

Connector configuration effect on the dynamic characteristics of multi-modular floating structure

In this study,a wave flume experiment is implemented in order to investigate the effect of connector topology on the dynamic characteristics of a modular floating structure.Three configurations of flexible connectors were designed for the experiment tests of a three-modular floating platform under various wave conditions.The results illustrate the module responses,relative displacements of connecting points between adjacent modules,and connector loads for floating structures with different types of connectors in the parameters region of non-dimensional module length.The comparison study demonstrates that the connector type III,which can provide appropriate constraint stiffness in all three degrees of freedom,generally delivers better dynamic stability to the floating platform.The longitudinal loads for the three types of connectors remain at the same level.Additionally,the mechanism of different types of connec-tors on the dynamic features of system is analyzed.This work can provide a few experimental guidelines for the connector design of floating structure in engineering practice.

Theory and Method of Power System Integrated Security Region Irrelevant to Operation States:An Introduction

How to comprehensively consider the power flow constraints and various stability constraints in a series of power system optimization problems without affecting the calculation speed is always a problem.The computational burden of probabilistic security assessment is even more unimaginable.In order to solve such problems,a security region(SR)methodology is proposed,which is a brand-new methodology developed on the basis of the classical point-wise method.Tianjin University has been studying the SR methodology since the 1980s,and has achieved a series of original breakthroughs that are described in this paper.The integrated SR introduced in this paper is mainly defined in the power injection space,and includes SRs to ensure steady-state security,transient stability,static voltage stability,and smalldisturbance stability.These SRs are uniquely determined for a given network topology(as well as location and clearing process for transient faults)and given system component parameters,and are irrelevant to operation states.This paper presents 11 facts and related remarks to introduce the basic concepts,composition,dynamics nature,and topological and geometric characteristics of SRs.It also provides a practical mathematical description of SR boundaries and fast calculation methods to determine them in a concise and systematic way.Thus,this article provides support for the systematic understanding,future research,and applications of SRs.The most critical finding on the topological and geometric characteristics of SRs is that,within the scope of engineering concern,the practical boundaries of SRs in the power injection space can be approximated by one or a few hyperplanes.Based on this finding,the calculation time for power system probabilistic security assessment(i.e.,risk analysis)and power system optimization with security constraints can be decreased by orders of magnitude.

Study on the Mathematical Model of Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breaker

According to the stream theory, this paper proposes a mathematical model of the dielectric recovery characteristic based on the two-temperature ionization equilibrium equation. Taking the dynamic variation of charged particle＇s ionization and attachment into account, this model can be used in collaboration with the Coulomb collision model, which gives the relationship of the heavy particle temperature and electron temperature to calculate the electron density and temperature under different pressure and electric field conditions, so as to deliver the breakdown electric field strength under different pressure conditions. Meanwhile an experiment loop of the circuit breaker has been built to measure the breakdown voltage. It is shown that calculated results are in conformity with experiment results on the whole while results based on the stream criterion are larger than experiment results. This indicates that the mathematical model proposed here is more accurate for calculating the dielectric recovery characteristic, it is derived from the stream model with some improvement and refinement and has great significance for increasing the simulation accuracy of circuit breaker＇s interruption characteristic.

CFD Simulation and Experimental Study of a New Elastic Blade Wave Energy Converter

Small moving vehicles represent an important category of marine engineering tools and devices(equipment)typically used for ocean resource detection and maintenance of marine rights and interests.The lack of efficient power supply modes is one of the technical bottlenecks restricting the effective utilisation of this type of equipment.In this work,the performance characteristics of a new type of elastic-blade/wave-energy converter(EBWEC)and its core energy conversion component(named wave energy absorber)are comprehensively studied.In particular,computational fluid dynamics(CFD)simulations and experiments have been used to analyze the hydrodynamics and performance characteristics of the EBWEC.The pressure cloud diagrams relating to the surface of the elastic blade were obtained through two-way fluid-solid coupling simulations.The influence of blade thickness and relative speed on the performance characteristics of EBWEC was analyzed accordingly.A prototype of the EBWEC and its bucket test platform were also developed.The power characteristics of the EBWEC were analyzed and studied by using the blade thickness and motion cycle as control variables.The present research shows that the EBWEC can effectively overcome the performance disadvantages related to the transmission shaft torque load and power curve fluctuations of rigid blade wave energy converters(RBWEC).

Analysis of vehicle powertrain dynamic performance

To study the vehicle dynamic characteristics under typical cycle conditions, a steady-state simulation model of the engine in GT-Power is established and verified with engine bench test data. A dynamic model of the engine is then established. A co-simulation with the engine dynamic model in GT-Power and the vehicle transmission model in AMESim is conducted based on the technology of HLA/RTI. The parameter changes of vehicle powertrain in the accelerating process of 0 - 32 km/h, and vehicle typical cycle conditions are studied. The influence laws of the typical parameters influen- cing vehicle dynamic characteristics are obtained, and a new approach of improving vehicle dynamic characteristics is proposed. The results show that the vehicle powertrain dynamic model can simu- late, analyze and predict dynamic changes of vehicle in actual operating conditions and guide power- train matching and optimization.

Characteristics of Hoist Structure in X-Y Precision Worktable of Electron-Beam Lithography Machine

3D solid mechanical model of the hoist structure is built up using ANSYS, a famous software of finite element analysis(FEA) on Apollo workstation. With the model, the static and dynamic characteristics of the hoist structure are calculated, in the meantime, they are respectively tested using the laser speck method and the hammerhitting method. The caclulated data are almost in conformity with the experimental results, which states clearly that the static and dynamic characteristics of the hoist stucture can meet the requirements of the submicron positionong precision and high efficiency of the worktable in the electronbeam lithography machine(EBLM).

真空预载型多孔质空气静压轴承的静动态特性分析

为进一步提高轴承刚度,将真空预加载技术与多孔质空气静压轴承相结合,使轴承在没有额外预加载导轨的情况下获得双向刚度。探讨工作条件和结构参数对真空预载型多孔质空气静压轴承性能的影响,基于计算流体力学(computational fluid dynamics,CFD)方法对其静动态特性进行了数值分析。深入研究了供气压力、真空度、渗透率、真空抽气口直径、扰动幅度和扰动频率等因素对轴承性能的影响。结果表明,相比于一般多孔质空气静压轴承,真空预载型多孔质空气静压轴承的刚度提高了22.34%;工作条件和结构参数对其静态和动态特性有显著影响。该研究结果对高刚度空气静压轴承的性能研究和优化设计具有一定的指导意义。