Experimental study on explosive mechanism of spontaneous combustion gangue dump

In order to explore the reason for the frequency explosion of spontaneous combustion coal gangue dump and get to know their explosion mechanism, established the experiment platform about spontaneous combustion coal gangue dump interoperable water. The gangue dump was heated using the external heat source, and rainy weather through water mist was simulated. Simulated experiment about explosion of spontaneous combustion coal gangue dump was carried out on the different conditions of the rainfall or not. The unusual gases produced in the course of gangue combustion and the changes in temperature were observed, and their impacts on the explosion of gangue dump were analyzed. The experimental results show that overall warming phenomenon of the gangue dump after watering occurred, the amount of H2 is three times than that before watering, and the amount of CO is far greater than that on the conditions of no-watering, at the same time combining with local observation and tests. It is found that the content of the oxygen reduce with the temperature increasing; however, gangue dump internal hydrogen content increase unusually on the rainfall conditions at 90 ℃, but the local measuring points reach the explosion limit. The existence of the CO and H2 is the main reason for inducing the explosion of spontaneous combustion coal gangue dump.

New Theory of Effusive and Explosive Volcanic Eruptions

In this study, we presented new theory of effusive and explosive of volcanic eruptions. New explanation of eruption mechanisms was done by using the Elemental Buoyancy Theory and new K-Th-U structure of Earth, developed early by author. During investigation of effusive eruptions, it was given clear answer on the question why the light chemical elements, mainly silicon and sulfur compound, currently dominate in the volcanic ashes, gases, and in the magma lavas. At investigation of explosive mechanism, we analyzed 38 strong eruptions with Volcanic Explosivity Index (VEI) more than 4+. It was shown that there is a link between the planet configurations and volcanic eruptions. It can be found that volcano eruptions occurred at the different types of planet alignments. The phenomenon does depend neither on planet mass nor on the relative positions of planets. Also the phenomenon does not depend on the distance between planets, but often eruptions were observed when the distances between planets are multiple units. Also in work, it was demonstrated that the planet alignment affects not only natural processes on the Earth, but also impact the Sun activity. Based on the comparison phenomenon on the Earth and Sun, we get new mechanism to rapidly rising up pressure under the lithospheric planes by gravity vortexes. This gravity vortex was called as terrestrial magmatic protuberances.

Research on the Application of Explosive Network in the Shaped Charge Warhead

With respect to the problems of that the shaped charge warhead currently uses a cover method to improve the penetration power, a method using an explosive network technology as the detonation mode of shaped charge warhead is proposed. In the context of some shaped charge warhead, a synchronous explosive network prototype is designed according to some charge structure parameters, such as the liner and main grain. From the performance comparison test, it can be known that the explosive network not only stably detonates, but also largely improves the penetration power and stability. Experimental results show that explosive network technology is an effective method for improving the penetration power. The results lay a solid foundation for the engineering application of the technology in the shaped charge warhead.

Research on the Explosion Temperature Response of Fuel Air Explosive Measured by Colorimetric Pyrometer

An infrared colorimetric radiation thermometrical system was established based on the theory of optical radiation. The dynamic temperature history of fuel air explosive (FAE) was measured to obtain the temperature responses of primary initiation FAE and secondary initiation FAE in real time. And the characteristics of their temperature history curves were compared and analyzed. The results show that the primary initiation FAE has higher explosion temperature and longer duration compared to the secondary initiation FAE.

Explosion characteristics of aluminum-based activated fuels containing fluorine

Measuring the dust explosion characteristics of aluminum-based activated fuels was a prerequisite for developing effective prevention and control measures.In this paper,ignition sensitivity,flame propagation behaviors and explosion severity of aluminum/polytetrafluoroethylene(Al/PTFE)compositions including 2 PT(2.80 wt.%F),4 PT(7.18 wt.%F)and 8 PT(11.90 wt.%F)were studied.When the content of F increased from 2.80 wt.%to 11.90 wt.%,the minimum explosive concentration MEC decreased from380 g/m^(3)to 140 g/m^(3),due to the dual effects of increased internal active aluminum and enhanced reactivity.The average flame propagation velocities increased as the percentage of F increased.The maximum explosion pressure Pmof 500 g/m3aluminum-based activated fuels increased from 247 k Pa to299 kPa.Scanning electron microscopy demonstrated that with the increase of PTFE content,the reaction was more complete.On this basis,the explosion mechanism of aluminum-based activated fuels was revealed.

Simulation and Experimental Investigation of Jetting Penetrator Charge at Large Stand-off Distance

In order to study and apply the penetration performance of jetting penetrator charge at long stand-off distance, three jetting penetrator charges(JPC), including spherical cone liner, truncated wide-angle liner and spherical segment liner, are designed. The numerical simulation analysis of the formation, elongation and penetration processes of rod-like jet is conducted by using LS-DYNA software. And the penetrating test is carried out at long stand-off distance. The test results show that the rod-like jet formed by the optimized spherical segment liner can pierce through a 90mm thick 45# steel target at 20 charge diameters(CD) stand-off distance when the charge detonation mode is a central point initiation, and the penetration depth can be up to 1.6CD. It is concluded that, at 20 CD stand-off distance, the penetration performance of JPC with spherical segment liner is the best, that of truncated wide-angle liner takes second place, and that of spherical cone liner is the worst.

Study on orientation fracture blasting with shaped charge in rock

On the basis of the theories of mechanics of explosive and rock fracture mechanics, the mechanism of crack initiation and its expansion of directional fracture controlled blasting with shaped charges in rock were studied, then the blasting parameters were designed and tested by a model test in laboratory and field experiment. The experimental and test results showed that the energy from blasting is directionally concentrated for the cumulative action. The directional expansion of cracks is satisfactory, the results of the model test and field test suggested that the orientation fracture blasting with shaped charge is a good means of excavating tunnels or cutting rock.

Application of Two-dimensional Viscous CE/SE Method in Calculation of Two-phase Detonation

The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper, the evolution of the detonation wave and the distribution of its physical parameters were analyzed. The numerical results show that the change of axial velocity of gas is the same as that of detonation pressure. The larger the liquid droplet radius is, the longer the time to get stable detonation wave is. The calculated results coincide with the experimented results better.

Shock wave and bubble characteristics of underwater array explosion of charges

In this study, we focused on the effect of the underwater explosion parameters of multi-point array explosion. The shock wave and bubble parameters of aggregate charge, two charges, and four charges were measured through an underwater explosion test, and their influence on the explosion power field of charge quantity and array distance was analyzed. Results show that the multi-shock wave collision of array explosion can be approximated to a linear superposition, and the interaction of delayed shock wave can be deemed as the increase of the shock wave baseline. Shock wave focusing and delayed superposition increase the shock wave peak pressure. Compared with the aggregate charge, the greater the number of array explosion points is, the higher the impulse and the gain of the bubble peak pressure are. At the same array distance, the smaller the charge quantity is, the higher the bubble impulse will be. At the same charge quantity, the smaller the array distance is, the higher the bubble impulse will be. The bubble period decreases gradually with the increase of the charge quantity, but the test orientation has little effect on the bubble period.

Experimental study on gas explosion suppression based on ferrocene

In order to study the gas explosion suppression performance based on ferrocene, the self-constructed experimental facility was used to accomplish the experiment of gas explosion suppression. By means of thermogravimetric analysis, the thermal characteristics of ferrocene have been gotten and the gas explosion suppression mechanism of ferrocene has been analyzed. The results show that ferrocene had good effects on gas explosion suppression, and the explosion pressure and flame propagation speed declined obviously. When ferrocene concentration is 0.08 g/L and methane volume concentration is 9.5%, the maximum explosion overpressure and maximum flame propagation speed of methane-air respectively decreased by about 59.5% and 19.6%, respectively. TG and DSC curves showed that the mass loss of ferrocene consists of two processes, which are sublimation and lattice fracture. The temperature of mass loss ranged from 128 ℃ to 230 ℃. The results showed profoundly theoretical significance to gas explosion suppression by ferrocene in coal mines.

Research on the intermediate phase of 40CrMnSiB steel shell under different heat treatments

In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40 Cr Mn Si B steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thickness and the number of the circumferential divisions. The results show that as the tempering temperature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.

Numerical Simulation on New Perforator

To study a new shaped charge of perforator, the jet formation and penetration processes in concrete targets are simulated numerically by using LS-DYNA finite element analysis software. The results show that the cylindrical liner can form jet and most materials on top of liner form the tip of jet, while the others form the tail of jet. The jet has a better continuity, and the ratio of cumulative jet length to the liner diameter can reach to 7.56. Furthermore, the ratio of bore diameter to the liner diameter is from 0.36 and 1, and the ratio of penetration depth to the liner diameter can be up to 5.5.

In-Tunnel Blast Pressure Empirical Formulas for Detonations External, Internal and at the Tunnel Entrance

In order to define the loading on protective doors of an underground tunnel, the exact knowledge of the blast propagation through tunnels is needed. Thirty-three scale high-explosive tests are conducted to obtain in-tunnel blast pressure for detonations external, internal and at the tunnel entrance. The cross section of the concrete model tunnel is 0.67 m2. Explosive charges of TNT, ranging in mass from 400 g to 4 600 g, are detonated at various positions along the central axis of the model tunnel. Blast gages are flush-installed in the interior surface of the tunnel to record side-on blast pressure as it propagates down the tunnel. The engineering empirical formulas for predicting blast peak pressure are evaluated, and are found to be reasonably accurate for in-tunnel pressure prediction.

A Comparative Experimental Study on the Blast-Resistant Performances of Single and Multi-Layered Thin Plates Under Close-Range Airblast Loading

The performance of multilayered thin steel plates subjected to close-range air blasts has been experimentally studied and compared with that of monolithic plates made of the same material and having equal mass. In present experiments, multilayered plates are in-contact four-layered thin steel plates and two types of deformation/failure modes were observed for them. Comparisons concerning deformation/failure modes, strain distributions and energy absorptions between the multilayered plate and its monolithic counterpart were conducted. It is found that the multilayered plate is much superior to its monolithic counterpart in the ability to deform against blast loading. Furthermore, under intense airblast loading, the multilayered plate can not only absorb much more energy but also effectively reduce the secondary destruction ability of structural fragments in comparison with its monolithic counterpart.

Confinement Effect and Diameter Effect on the Non-ideal Detonation Parameters of Small Charge

An expanding model of the confinement of non-ideal detonation of small charge is established on the basis of the nozzle theory.Making use of the expanding model,the analytic relationship of small charge detonation velocity and the semi-empirical relationship of detonation pressure that both change with charge diameter and confinement condition are established.The detonation velocity and pressure of small charges are calculated and experimentally verified,and the detonation velocity deviation is less than 7% while the detonation pressure deviation is less than 9%.

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine(SRE) in storage or transportation, protective armor was designed and the shelled charges model(SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed.By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168-1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor(WFRCA).

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.

Experimental Study of Structure Shock Vibration in Soil Caused by Explosion of Conventional Weapons

When hitting underground structures directly or exploding in rock-soil media near underground structures, the conventional weapons with large charge weight will make underground structures be subjected to strong shock vibration and cause personal casualty and damage of precision electronic equipments. The shock vibration has become one of the cardinal killing means of weapons. However, the existing methods of predicting structure shock vibration are limited evidently. In this paper the coupling coefficient of acceleration in clayey soil is obtained firstly. Subsequently based on repeated experiments of chemical explosion, after dimension analysis and by using method of multivariate stepwise regression, the calculation formulae of shock vibration acceleration for the underground structure are obtained finally. The formulae consider top and side explosion respectively, taking into account the effects of penetration depth, charge weight, distance to explosion center, rock-soil media, size of structure and buried depth. They are easy to use with high practicability and degree of confidence, and can provide credible evidence for prediction of shock vibration and vibration isolating design of underground structure.

Reliability Analysis for Air-Gap Detonation Transfer Interface by Numerical Simulation

In order to reduce the test samples in the reliability design and assessment,the function process of air-gap detonation transfer interface was simulated by LS-DYNA software.The stress nephograms for the detonation transfer processes of six kinds of design parameters were analyzed.The results show that when the length of air-gap is between 2 and 18 mm,the detonation can be normally transferred which is consistent with the test result of NeyerD method.The result has referential value for design and analysis of similar products.

Experiment and Calculation for Expansion Process of Ablation Plasma Jets in Liquid

The expansion process of ablation plasma jet in liquid was experimentally investigated by using high speed digital camera. The sequential pictures show that, in the initial stage of the jet, the Taylor cavity expands in the axial and radial directions simultaneously, and then, is subjected to the constraint of chamber wall, in axial direction mainly. The maximum axial speed of the cavity's head ranges from 240m/s to 280m/s. Some strong heat conduction and mass transmission effects can be found in the surface of Taylor cavity, where the plasma cools down and condenses as solid particles while the liquid vaporizes as gas. Compared the expansion processes of the cavities among the different discharge energies and the nozzle diameters, it can be seen that the expansion speed of the cavity is directly proportional to the discharge energy and inversely to the nozzle diameter, and the effect of the discharge energy is stronger than that of the nozzle diameter. A set of equations describing the expansion process of ablation plasma jet was derived under the assumption of momentum conservation. The calculated results by use of the equations coincide with the experimented results better.